Issue in opening NI MAX.

I am facing problem in opening NI MAX software and I am unable to detect the hardware in it. When I open the software, following message appears in the dialog box.
I am using MAX version 5.4 and LabVIEW (FDS 2012 SP1).
The niGPIBsys.dll plug-in caused an exception in the CmxSysExpertManager::FinalizeExpert function in the NIMax process.
See these files for details:
C:\Documents and Settings\All Users\Application Data\National Instruments\MAX\Logs\20140618_134419-NIMax-00000F38.log
C:\Documents and Settings\All Users\Application Data\National Instruments\MAX\Logs\20140618_134419-NIMax-00000F38.dmp
Please find the screen shot of the error attached.
I have one more query. Is it possible to monitor the online values coming to the AI modules in the MAX ?
Attachments:
MAX_ERROR_1.png ‏177 KB

Thank you for sharing this link.
But, in our hardware configuration, we have used ethernet(TCP/IP).
I was able to detect hardware initially, but due to some abrupt closing of application, hardware is not getting detected.
I think some driver files got corrupted, yet, I'm not sure. But, in this isssue, it is definitely not related to the connectivity of hardware.

Similar Messages

Starting AMT FailedI am facing the same issue while opening AMT/Mobile Sale

Hi All,
I am facing a issue while opening AMT/Mobile Sales Appl/System Maintenance. I am getting the error saying 'UI_CORE_APPL_LAUNCH_FAILED_STA'. Could anyone out there please tell me how to resolve this issue?
I checked the UID and PWD under HKEY_LOCAL_MACHINE\SOFWARE\SAP\MSA\MW\secutiry for IDES DB and they are consistent with the ODBC parameters for IDES.
Much appreciated,
Karuna.

Hi All,
my issue is resolved. The problem with my issue was the missing entry in the table SMO_AUTH_SYS. I found the note 687679 and ran the report according to it. With that table SMO_AUTH_SYS was populated with the record. Later i was able to connect to AMT and gave the standard role SAP_AMT_USER and since then i am able to log into MSAA application and also MSY application
My issue is resolved. Thanks for everyone who tried to help me out.
Thanks,
Karuna.

Issue while opening BI4 webi report instance using CMC on IE8 browser

Hi,
Having issue while opening BI4 webi report instance using CMC on IE8 browser.
Steps to reproduce the error:
1. Login to CMC
2. View Webi History.
3. Open successful instance (For the 1st or 2nd time reports are opening up, from the 3rd time it just freeze the session)
4. After it get freeze we need to close the IE using Task Manager.
Can any one please suggest a resolution for this issue.
Thanks,
Ganesh.M

Hello Gokul,
first thing is to check is if your chrome version is supported by your current BO version as specified in the PAM (is it?). If the chrome version is supported, and you still have an issue, then you can check with a sap support engineer.
best regards,
Victor

Issue while opening webi reports using OpenDoc url in Chrome browser

Hi
We are in SAP BI4.0 SP7. We are facing weird issue while opening the webi report via OpenDoc url in chrome. we are facing the below issue only in chrome and it works perfectly in IE and Firefox.
For the first time the report gets opened properly(when a session is created). If we try to open the same report from the same machine in a different browser tab, report gets opened up without any Tables\charts. We could see only a blank page with just the Report Tab name at the bottom. If we do refresh on the page, the report opens up correctly. We have checked for packet drops and there is no such thing. Is there any setting that we should make to resolve this. Your help is appreciated.
thanks
Gokul

Hello Gokul,
first thing is to check is if your chrome version is supported by your current BO version as specified in the PAM (is it?). If the chrome version is supported, and you still have an issue, then you can check with a sap support engineer.
best regards,
Victor

Performance issue while opening the report

HI,
I am working BO XI R3.1.there is performance issue while opening the report in BO Solris Server but on window server it is compratively fast.
we have few reports which contains 5 fixed prompt 7 optional prompt.
out of 5 fixed prompt 3 prompt is static (it contains 3 -4 record only )which is coming from materlied view.
we have already use many thing for improve performance in report like-
1) Index Awareness
2) Aggregate Awareness
3) Array fatch size-250
3) Aray bind time -32767
4) Login time out -600
the issue is that before refresh opening the report iteslf taking time 1.30 min on BO solris server but same report taking time in BO window server 45 sec. even we import on others BO solris server it is taking same time as per old solris server(1.30 min).
when we close the trace in solris server than it is taking 1.15 sec time.it should not be intial phase it is not hitting more on database.so why it is taking that much time while opening the report.
could you please guide us where exectly problem is there and how we can improve performance for opening the report.In case the problem related to solris server so what would be and how can we rectify.
Incase any further input require for the same feel free to ask me.

Hi Kumar,
If this is happening with all the reports then this issue seems to be due to firewall or security settings of Solaris OS.
Please try to lower down the security level in solaris and test for the issue.
Regards,
Chaitanya Deshpande

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

16bit? Pixels extending beyond the canvas? (from a crop with delete unused pixels turn off). Have you previously been saving PSD files?
IME you sometimes have to tell Photoshop that the first save of a session is JPG, and it remembers from there on. The way to 'tell' Photoshop that JPG, or PDF, or PNG etc are now your preferred format is to Ctrl (Cmd) click on that format in the Save As drop down list. So long as the file does not have parameters that your chosen format does not support, then this should work for you.
[EDIT] Just noticed that you did include 'Crop' in the subject line. Do you have 'Delete cropped pixels' checked?

Issue with Opening a PDF file

We have just completed an upgrade of one of our servers executing Reporting Services.   The upgrade was from 2005 to 2008.
After we have rendered a report and have it saved in PDF format, we start having issues.
If we try to open the PDF by double clicking on the file name in Windows Explorer, Adobe Reader starts, but sits unresponsive and consumes an excessive amount of CPU cycles.    It never completes the open and we have to kill the Adobe Reader process in Task Manager.
If we start Adobe Reader, and then use the Menu to do FIle -> Open, the PDF file opens immediately.
We have attempted both methods using several different versions of Adobe Reader.    The issue occurs on all versions prior to 9.3.
Since we are a service organization, we are unable to force our clients to upgrade to a more current version of Adobe Reader without providing assurances that this will correct this issue.
Has anyone else seen this type of issue with opening PDF files rendered by Reporting Services?   And if so, what is the cause and how did you correct it?
Thanks
Steve

Hi there,
Please find attached a word document which contains the error that comes up when I try to open the PDF file. This PDF was e-mailed to me from one of the Safety companies that I receive e-mails from on a regular basis. I believe I am running Windows XP and the version of Adobe is Adobe Reader X. I hope this is enough info for you.
Janice Nadeau
[signatue deleted by host]

Mac Pro 6,1 STILL having issues with Open CL (4K scaling and SpeedGrade direct link grades)

I've seen the staff responses to the issues of the new Mac Pro GPU saying that 10.9.4 fixes everything. For me, it has fixed my export issues, so I'm glad. I'm no longer getting lines and artifacts on my renders.
That's great.
However, I'm still having several issues, and they seem to be linked to Adobe and Open CL.
Here's a video that shows what's going on:
mac pro issues july 7 - YouTube
Issue #1
Like most of you probably, I'm doing 1080p exports of most things I'm working on. The first project shows a 1080p timeline with a mix of 4k, 5k, and 720p footage. Because zooming in so much on a 720p file in a 4k timeline looks so crappy, I'm doing 1080p timelines and scaling everything to the size it needs to be. I started in a 4k timeline then switched to 1080p because the 720p footage looked so terrible. However, in the 4k timeline, I didn't have any of the issues I'm showing in this first part of the video.
When I switched to the 1080p timeline, I discovered a weird quirk: When I resize the 4k (or 5k) footage to the size it needs to be (which varies based on the frame I want), it goes back to the 100% view when I'm scrubbing through it. When I pause, the size of the video goes back to the way I set it. I show this in the video. Then I show what was my working solution for the time being: "scale to frame size", which brings all the videos to the size of the sequence frame size and works fine. Later, I turn off OpenCL in premiere and when I scrub through the video, it doesn't zoom back in or only stay at the size I set when stopped. For some reason all of these issues only happen at 50% scale or smaller. It doesn't happen at, say, 60%.
I've tested this with raw R3D files and other 4K (or 5K) clips (even clips exported from After Effects) and the same thing happens. It doesn't seem to happen with 2.5k footage or 1080p footage.
Issue #2
This is the second project you'll see in the video.
After grading in speedgrade (through direct link) I open my project back up in premiere and start playing it back. The video plays back with delays and frame drops. Now normally, this would be expected. But this is 1080p pro res footage, and this is just an effect added, and the yellow bar appears indicating that open CL should be accelerating the playback and it should do so smoothly.
Maybe I was just wrong in assuming that a simple grade from speedgrade would be able to playback smoothly. I turn off the grade, and it plays normally.
But then, when I turn off open cl and leave the grade on, the video plays back without ANY issues.
So to me, it seems I'm still having issues with Open CL and adobe. I've found fixes that make it work temporarily, I don't need that kind of answer. However, I would like this to work. Is there something I'm doing wrong? Something I need to do to get this to work?
Here are my specs:
Mac Pro 6,1 (Late 2013)
3 GHz 8-Core Intel Xeon E5
64 GB 1867 MHz DDR3 ECC
AMD FirePro D700 6144 MB (x2)
OSX 10.9.4
Firmware: 2.20f18
What you're seeing is latest version of Premiere (CC 2014, v8.0.0 [169] Build)
Everything here is ProRes 422, running from a Promise Pegasus2 R4 RAID (drives: 4x Seagate Desktop HDD 4 TB SATA 6Gb/s NCQ 64MB Cache 3.5-Inch Internal Bare Drive ST4000DM000) (that's thunderbolt 2).
I've done everything: I've restarted my computer hundreds of times, I've reset NVRAM and PRAM and done power cycles.
This isn't just some issue that started with 10.9.3 of OSX, the 4k issues happened when I first switched to a 1080p sequence back in February (2014) or so, which means it was an issue even with 10.9.2 and the previous firmware release.
I've reported this issue to adobe.

That crash appears to be casued by the Facebook plug-in.
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

We are facing issue to open a static form PDF in Chrome Browser , which is loaded using Adobe FormService.Able to open in other browsers but not able to open the static forms in chrome with LC 11.0 version

We are facing issue to open a static form PDF in Chrome Browser
, which is loaded using Adobe FormService.
Able to open in other browsers but not able to open the static
forms in chrome with LC 11.0 version
Below error message:
The document you are trying to load
requires Adobe Reader 8 or higher. You may not have the Adobe Reader installed
or your viewing environment may not be properly configured to use Adobe Reader.
For information on how to install Adobe Reader and configure your viewing
environment please see http://www.adobe.com/go/pdf_forms_configure.
Please let us know do we have any option for disabling
<NoXFA/> tag by calling formService. RenderPDF() method on adobe service
For dynamic forms its working by adding <NOXFA/> in
DDX xml . only for static forms its not working because we are not using
assembler service for this forms.
Please let us know how we can disable XFA in static forms??????????????????

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

Issue with opening .PDF files after recalling from Symantec Enterprise Vault

Good Morning,
I am having issues with opening PDF files that have been recalled from Symantec Enterprise Vault and some of the files are anywhere from 3-4 years old. Some files open, while others return the error: Adobe Reader could not open filename.pdf because it is not a supported file type or might have been damaged. It is inconsistent as to which files it occurs with. I am not ready to believe that I have that many corrupt files out there. I am opening them on a Windows 7 Enterprise SP1 x64 desktop. Adobe 10.1.7. I have already configured the registry setting for bValidateBytesBeforeHeader that I found in another article to no avail.
The files are on a network share, but I also tried copying them to my local desktop and still received the error.
I have seen other posts regarding this error, but do not see a definitive solution and am hoping that in recent days someone has come up with a solution.
Thank You
Brian Dougherty

Not supported file type can (but not always) mean the PDF was created with an old enough version of Acrobat, that it isn't comaptible with reader X or XI.
Might have been damaged is pretty cut and dried in its meaning and interpretation.
There's a known issue with Mac OS and Safari Browser "breaking" PDFs as they download, but it's not so common for Windows. Since these are files you already had, it would be even less applicable.
You can try downloading an older version of Reader to check if it's a compatibility issue, but you'd have to uninstall the latest to do it and it'd be a lot of bother if they still don't open. It would also mean they are "broken" and cannot be repaired, that I know of.

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help.

How do I resolve the issue Cannot open the file ".indd". Adobe InDesign may not support the file for

How do I resolve the issue Cannot open the file ".indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing , or the file may be open in another application?

Shouldn't the CC version be able to open any file created in an older version on InDesign?
Yes, it ought to.
If the older file wasn't yours (if someone emailed it to you,or burned it on a disc, or whatever), then I am almost willing to bet you a beverage in the city of your choice that it's not a complete InDesign file. That is, maybe it was zipped and renamed, or the beginning or end of the file was chopped off during download, or something like that. The only reason I'm not actually making the bet is that there is a remote chance that I'd lose, and maybe you're in Adelaide or Khabarovsk or somewhere where the cost of airfare to me would make that bet a very expensive bet for me to to lose. So no latte for you if I'm wrong!
The script that Jongware posted will tell you what version of InDesign made the file to begin with. Additionally, if someone did something like rename YourFile.PDF to YourFIle.INDD, it'll report that it's Not An InDesign File. Because while SpectrumPCS is kinda right and that message can be generated when attempting to open a CS5 file in CS3 or whatever, it also spits out the same message when you just try to open an Autocad file, or a Windows system file, or a PDF, or any file that InDesign actually cannot open at all.

I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

I am facing issue when opening flash files in Flash CC. (Error : - .fla was created with a later version of Adobe Flash Professional CC and might contain new features not supported in this version of Flash professional.)

fyfesa1970 wrote:
Ask a simple question and get a simple answer...see below...hilarious:
All representatives are actively assisting other customers. Your estimated wait time is 0 minute(s) and 1 second(s) or longer. Thank you for your patience.
We all can learn from this. Whenever you get stuck in a customer-service situation that goes nowhere, as soon as you become aware of the futility, get the name and employee ID of the person, then say, "I don't mean to be rude, I think we're both wasting our time. Perhaps you weren't trained for this issue, or perhaps your system isn't displaying the correct information. It doesn't matter, because I'm not getting proper customer support this way. Please ESCALATE this to your highest-level manager IMMEDIATELY. If that person isn't availabe, ESCALATE me to that person's highest-level manager. If you haven't been given the proper training, you can use this to inform your manager that you need the training. Thanks for trying to help. I appreciate it. I have copied and saved this chat session. NOW PLEASE ESCALATE THIS CASE AS I HAVE REQUESTED ABOVE. I'm waiting now... "
The point is that you're a customer, and the company needs customers, so the individual who's failing to deliver good service needs to be identified so they can be properly trained, and so that problems in the system can also be identified, but more important is that you get the service you're entitled to.
If you search the forum for similar questions, you'll see the kind of information that the volunteer users like yourself on the forum need to know about your system and files involved, so they can help you better.
Good luck.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Issue with Open Enrolment Link in ESS - Benefits

Hi Experts,
We are facing two issues with open Enrolment Link in ESS for benefits, Need your help in resolving this. Please find the details below :
1. Benefits cost is not appearing in open enrolment Screen
Details : Monthly Contribution cost is not appearing against the Benefits Plan for which employees are already enrolled in Open Enrolment Screen, Because of this employees are not able see previous contribution before deciding on contribution amount for next Financial Year.
2. URL for Benefits plan Gets disappeared in Open enrolment Screen
Details : When Contribution is removed for any Benefits Plan the corresponding URL link disappears, But this comes up when the page is refreshed.
Could you please let us know if this is related to missing configuration or Java webdynpro code.
Our Live system is ECC6.0 SP level A4 , Please let me know if you need more details.Looking forward for your response.
Regards,
Shilpa

In regards to your first question, it could be a date issue for the infotype record. If the records for open enrollment are set to be effective for a future date, and the current record is delimited, then you won't see it in the open enrollment screen. This is true for benefits like a flex account because they have to be re-elected every plan year.
Let's say that any elections made in the current open enrollment period you are in take effect June 1, 2014. If the current record has an end date before June 1, then in the enrollment screen the employee will not see the current record because SAP is looking at June 1.
Take a look at the employee's record and at the benefit you want them to see and see what the end date is for the most recent record.

Issue while opening the web analysis reports

Hi,
One of our user is not able to open a web analysis report with an error messages saying
"Java.Lang.Exception: Unexpected HTTP status code of 500 received from server"
"Document does not exist or no authorization to open the document"
Other users with the same level of access are able to open the report fine and also the same user is able to access the report fine with a test id from his machine.
What could be wrong? Any suggestions please.
The only thing I see here, something wrong with userd ID or password.
Thanks
Prasad

Hi,
I had also faced this problem earlier. I was using HFM as data source for WA reports. After searching I found that there was some change at HFM level. Some dimensions/members had been deleted or added in HFM. And I was using those missing members in WA Grid.
I had to recreate my reports again as I didn't get any other way to deal with this problem.
Please shared any other alternative option, if you found while working on this issue.
Thanks & Regards,
Mohit Jain

Issue in opening NI MAX.

Similar Messages

Maybe you are looking for