Issue in upgrading JDeveloper or installing extension  in it

Hi,
Im currently havin Jdeveloper11g (11.1.1.3.0) .Could I know how to upgrade my JDeveloper 11g from version 11.1.1.3.0 to 11.1.1.3.37.56.60?
I need to add extension "spring & Weblogic SCA 11.1.1.3.37.56.60 " ,On help>check for updates> ,by selecting the appropriate extension and proceeding with this , at last it ask for restart JDeveloper.
After restart I couldn't find the spring library or spring components in Component palette in SOA Application .Can u please suggest me the procedure or link to resolve this issue?
Thanks in Advance.

Hello,
If you click on Help --> About you will see the complete version of JDeveloper that you are using under the Version tab.
If the Spring extension installed properly, you can look under Tools --> Preferences --> Extensions.
It will be listed as:
Oracle JDeveloper Spring, Weblogic SCA Integration
I'm not familiar with this extension itself, so I can't tell you if it's suppose to have components in the pallet or not not. The description says it provides the ability to create and edit Spring and Weblogic bean definitions.
I do see quite a few new Spring and Weblogic options in the New Gallery after installing the extension. Look under File --> New and make sure the All Technologies tab is selected. You will see entries under the General --> Deployment Descriptors and under Business Tier --> Spring.
Hope that helps you figure out if the extension installed properly.
--jb                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

Similar Messages

  • After upgrading to 8.0.1 Firefox will download but not install extensions after upgrading to 8.0.1

    Windows Vista. Avast Antivirus with Sandbox feature.
    Outside Sandbox - all extensions available. Within Sandbox - no extensions available and not able to install any extensions. ie Adblock Plus, No Script etc.
    Before upgrading to 8.0.1 no problems in either mode. Add-ons appear to be intact in either mode.
    When attempting to install an extension after downloading:
    "(extension) could not be installed because Firefox cannot modify the needed file".
    Reluctant to delete pluginreg dat file because all extensions are working outside Sandbox.

    Hi,
    You may have to "trust' the upgraded Firefox, if there is such a setting in Avast and install extensions after starting Firefox outside of the sandbox - normally. Not sure about Avast, but usually a sandbox would mean a virtual area like hard disk storage, registry settings etc. for the sandboxed app and once the application is closed or the computer is shutdown, everything that was done by the app or via the app is sort of vaporized and the application and it's settings are returned to it's previous permanent state.

  • Upgrading for SW CS6 to Creative Cloud can I access my installed extensions

    I am upgrading form DW CS 6 and wnat to retain access to my sites and extensions will this work automatically or do I have to re install extensions and import my site settings

    CC is a completely new suite.  It's the same as moving from CS5 to CS6.
    You will need to use the CC Extension Manager for CC and the CS6 Extension Manager for CS6 because they don't speak the same language.
    http://www.adobe.com/exchange/em_download/
    Important note: MXP type extensions are not supported in Extension Manager CC. The MXP format has been replaced by the ZXP extension format. An MXP extension can be converted to a ZXP extension using the “Convert MXP Extension To ZXP” tool which can be found in the Tools menu in Extension Manager for CS6.
    Nancy O.

  • Performance issues since upgrade

    I am on a late 2011 MacBook Pro and am having severs performance issues since upgrading to Mavericks. I fear my issues may be related to company installed anti-virus (which I cannot remove), but I was hoping someone could look over my EtreCheck for other potential solutions.
    One really odd issue I am having, which I cannot seem to find good information for on Google, is at least 4-5 times a day my Mac just stops. No beach ball, no anything, for about 1-5 minutes. Then it's fine. Maybe just me grasping at straws, but it seems related to a when webpage loads a bunch of images? I always use Safari btw, but testing other browsers, like Chrome & Firefox, it happens as well.
    I have also removed TotalFinder and have noticed no improvement and still have the above issue.
    Thanks in advance!
    Here is my EtreCheck:
    Problem description:
    slow performance on Mavericks
    EtreCheck version: 2.0.11 (98)
    Report generated November 11, 2014 at 8:51:26 AM EST
    Hardware Information: ℹ️
      MacBook Pro (17-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,3
      1 2.5 GHz Intel Core i7 CPU: 4-core
      8 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 512 MB
      AMD Radeon HD 6770M - VRAM: 1024 MB
      Color LCD 1920 x 1200
      LED Cinema Display 1920 x 1200
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 0:46:22
    Disk Information: ℹ️
      APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 749.30 GB (256.69 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MATSHITADVD-R   UJ-8A8
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Fitbit Inc. Fitbit Base Station
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple, Inc. Keyboard Hub
      Apple, Inc Apple Keyboard
      Tablet PTZ-630
      Logitech Logitech USB Headset
      Apple Inc. Display iSight
      Apple Inc. Apple LED Cinema Display
      Apple Inc. Display Audio
      Apple Computer, Inc. IR Receiver
    Firewire Information: ℹ️
      Iomega HDD unknown_device 800mbit - 800mbit max
      S.M.A.R.T. Status: Verified
      disk1s1 (disk1s1) <not mounted> : 32 KB
      Iomega HDD (disk1s3) /Volumes/Iomega HDD : 500.04 GB (22.88 GB free)
      Files (disk1s5) /Volumes/Files : 499.90 GB (416.87 GB free)
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Anywhere
    Kernel Extensions: ℹ️
      /Library/Application Support/Symantec/Protector
      [not loaded] com.symantec.kext.protector.panther (1.0f5) Support
      [not loaded] com.symantec.kext.protector.tigerplus (1.0f5) Support
      /Library/StartupItems/SymAutoProtect
      [loaded] com.Symantec.kext.SAVAPComm (11.0.6) Support
      /System/Library/Extensions
      [loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
      [loaded] com.InnovationTechnology.driver.ComputerAudio (1.01 - SDK 10.7) Support
      [not loaded] com.cisco.nke.ipsec (2.0.1) Support
      [not loaded] com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) Support
    Startup Items: ℹ️
      CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
      NortonMissedTasks: Path: /Library/StartupItems/NortonMissedTasks
      SMC: Path: /Library/StartupItems/SMC
      SymAutoProtect: Path: /Library/StartupItems/SymAutoProtect
      SymProtector: Path: /Library/StartupItems/SymProtector
      Startup items are obsolete and will not work in future versions of OS X
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.CS5ServiceManager.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [running] com.jamfsoftware.jamf.agent.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [running] com.symantec.quickmenu.application.plist Support
      [running] com.wacom.wacomtablet.plist Support
      [running] net.juniper.pulsetray.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [running] com.fitbit.fitbitd.plist Support
      [running] com.fitbit.galileod.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [running] com.jamfsoftware.jamf.daemon.plist Support
      [not loaded] com.jamfsoftware.startupItem.plist Support
      [loaded] com.jamfsoftware.task.1.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [loaded] com.rogueamoeba.instanton-agent.plist Support
      [running] net.juniper.AccessService.plist Support
      [loaded] net.juniper.UninstallPulse.plist Support
    User Launch Agents: ℹ️
      [loaded] com.valvesoftware.steamclean.plist Support
      [running] ws.agile.1PasswordAgent.plist Support
    User Login Items: ℹ️
      gfxCardStatus Application (/Users/[redacted]/Downloads/gfxCardStatus.app)
      Dropbox Application (/Applications/Dropbox.app)
      Microsoft Database Daemon Application (/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app)
      cdn Volume (/Volumes/cdn)
      TotalFinder Application (/Applications/TotalFinder.app)
      SAVDiskMountNotify Application (/Library/Application Support/Symantec/AntiVirus/SAVDiskMountNotify.app)
      ScanNotification Application (/Library/Application Support/Symantec/AntiVirus/ScanNotification.app)
      SymSecondaryLaunch Application (/Library/Application Support/Norton Solutions Support/Scheduler/SymSecondaryLaunch.app)
    Internet Plug-ins: ℹ️
      OfficeLiveBrowserPlugin: Version: 12.3.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.223
      AdobePDFViewer: Version: 10.0.2 Support
      Unity Web Player: Version: UnityPlayer version 4.5.4f1 - SDK 10.6 Support
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
      AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Support
      iPhotoPhotocast: Version: 7.0
      DirectorShockwave: Version: 11.5.9r620 Support
      QuickTime Plugin: Version: 7.7.3
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      Silverlight: Version: 4.0.60310.0 Support
      MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
      net.juniper.DSSafariExtensions: Version: (null) Support
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 2.3.1.2 Support
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
      WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
      SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
      WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
    User Internet Plug-ins: ℹ️
      SOEWebInstaller: Version: 1.0 - SDK 10.5 Support
      Aspera Web 3.1.2.72265: Version: (null) - SDK 10.6 Support
    Safari Extensions: ℹ️
      1Password
      Adblock Plus
      Reddit Enhancement Suite
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Flip4Mac WMV  Support
      Java  Support
      MacFUSE  Support
      SymAutoProtect
      Symantec\nQuickMenu  Support
      WacomTablet  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Destinations:
      Iomega HDD [Local]
      Total size: 500.04 GB
      Total number of backups: 37
      Oldest backup: 2014-10-14 14:11:11 +0000
      Last backup: 2014-11-11 13:27:48 +0000
      Size of backup disk: Excellent
      Backup size 500.04 GB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
          36% com.apple.WebKit.Plugin.64
          34% SymAutoProtect
          13% WindowServer
          9% Unity
          4% Activity Monitor
    Top Processes by Memory: ℹ️
      455 MB Safari
      361 MB com.apple.WebKit.Plugin.64
      292 MB Unity
      77 MB com.apple.WebKit.Networking
      77 MB com.apple.WebKit.WebContent
    Virtual Memory Information: ℹ️
      2.08 GB Free RAM
      2.39 GB Active RAM
      1.34 GB Inactive RAM
      1.40 GB Wired RAM
      1.11 GB Page-ins
      5.54 GB Page-outs

    Activity Monitor - Mavericks  also Yosemite
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy

  • JDeveloper with SOA Extension

    Hi
    I am not sure if this is the appropiate forum for this question or not but its the only forum related to JDeveloper.
    I am using JDeveloper 11.1.1.5.0 with the soa extension pack installed. When I access the Expression Builder from an assign activity, it takes at least a minute
    for the expression part of the windows to return and become editable. This is true regardless of whether it is a new expression I am creating or editing an
    existing expression.
    JDeveloper is installed on windows 7 64-bit edition and is configured to use 64-bit Java. Below are the options that are turned on from ide.conf
    AddVMOption -Xmx4000M
    AddVMOption -Xms1024M
    AddVMOption -Xverify:none
    and below are the options for jdev.conf
    AddVMOption -XX:MaxPermSize=768M
    AddVMOption -Xbootclasspath/p:../lib/lwawt.jar
    AddVMOption -Dsun.awt.keepWorkingSetOnMinimize=true
    AddVMOption -Dsun.java2d.noddraw=true
    AddVMOption -XX:+HeapDumpOnOutOfMemoryError
    AddVMOption -Doracle.jdeveloper.webservice.showAllOwsmPolicyTypes=false
    AddVMOption -Doracle.jdeveloper.webservice.hidePropertyOverride=false
    AddVMOption -Dsun.awt.disablegrab=true
    AddVMOption -XX:+UseCompressedOops
    Thanks
    Damien

    I am using jdeveloper11.1.1.6 version updated with soa extension 11.1.1.You should always use extensions for teh current version of Jdeveloper to avoid any libary or mismatch in pactches kind of issue. _Please uninstall SOA Extension for 11.1.1.3 and install extsion for 11.1.1.6                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Chromium does not (load image & install extension)

    Chromium does not (load image on Google plus & install extension)
    Also it does not load images on some sites such as chrome web store.
    I had this problem after I upgrade to chromium 14.0.835.186-1 64-bit
    I am sure of that, I select this "Preferences -> Under the Hood -> Content Settings -> Show all images (recommended)"
    When I want to install any extension. it will not install.
    This message appears:
    ==
    This webpage is not available
    Chromium could not load the webpage because clients2.googleusercontent.com took too long to respond. The website may be down, or you may be experiencing issues with your Internet connection.
    ==
    I removed the package and deleted all configurations and caches.then install it but that did not fix it.
    I tried it on Firefox. it is working well.
    I don't know if this is a bug with chromium or there is something wrong in my configuration.

    it is working now.
    maybe there was a lag from the server.
    Thank you.
    Last edited by G_P (2011-09-29 14:29:53)

  • Change Log issues - Post Upgrade

    Hi Experts,
    We are in the process of Upgrading BW from 3.X to BI 7. As part of this we copied our existing Production system into the sand box and basis did the technical upgrade on the same (Sand Box). Later we ran some post upgrade Jobs as part of the SAP defined Upgrade Process.
    1) But after the upgrade i can notice that most of the ODS objects, doesn't have 'Change Log' table in the 'Information (Log/Status)' screen.
    2) Even when i try to view the change log content in Manage screen, it gives me a pop up to enter the change log table, instead of directly taking me to the selection screen.
    3) When i try to activate a request, even that fails with an SQL error 'SAPSQL_EMPTY_TABNAME'.
    Is there any process that has to be run to link the Older version change log tables to the corresponding ODSs after Upgrade?
    Has anyone come accross similar issues? If yes, how was it solved? All suggestions are invited.
    Thanks and Regards,
    Jay

    HI JayaPrasad,
    Chek the note : 1059171 which is related to Change log,
    I too faced this issue when upgraded to Bi7.0 on SP12, but as soon as SP13 is installed the issue is solved, so I suggest to go for SP 13 for upgrading to Bi7.0.
    Regards,
    Srinivas

  • Some Photoshop issues after upgrading from CS5 Master to CS5.5 Master

    Hello
    I'm a bit of a noob when it comes to the Adobe stuff. Not so with PC's
    Win 7 SP1 x64 8G RAM etc etc...
    I have a CS5.5 Master License and it is the update from CS5 that has thrown a wrench into my works.
    I had CS5 MAster Collection happily running along; no problems. I decided to buy the CS5.5 upgrade and I installed it in place.... that is, on top of the CS5 stuff.
    Now I have Photoshop problems;
    1.  The upgrade did not over-write my PS 5 directory... it created a PS5.1  Directory. D'oh! No plugins in PS5.1!! Not what I expected at all. I  just wanted it to upgrade. Is it normal for Adobe products to do this (the answer seems to be yes)  and if so how do I get my plugins in the new version? It's kind of a  pain... I have a lot of photoshop plugins... What do most users here do? Uninstall old versions first? Change the "plugins" path? I don't require the older version of PS5 on my hard drive... but now the plugs are in PS5 and the OS opens PS5.1... whoops!
    2. My  Photoshop printing broke in both versions 5 and 5.1. I am just using an  Epson 3880 and when I try to print in PS I get a message to the effect  that the printer is no longer available (it is) and it's the wrong  profile... trouble is... the Printer menu item then becomes greyed  out... I can't change anything. Can't fix. Does that ring a bell with anyone? This seems to be related to the upgrade. My Lightroom 3.x still prints the exact same photo with the same profile and printer just fine.
    So.... If  anyone can shed some light on these two specific issues I would really  appreciatte it! and with so many pieces (it is a huge Suite) would I be better  off un-installing CS5 and then installing CS 5.5? What are the hardcore  adobe users thoughts on best practices for upgrades?
    Thanks a ton! -- David

    1. Yes, Adobe apps always install in new folders.
    2. Try the Photoshop forum for Photoshop specific questions.
    Most of the apps weren't really upgraded. The .1 releases just added CS services as far as I know.
    I just built a new machine and installed InDesign CS5 and then installed the CS5.5 Master Collection. Your needs may vary.
    Bob

  • Problem installing extension in DW MX2004 mac edition

    Hi all,
    I run DW MX2004 under OS X 10.4.10 on a Mac. I'm having
    trouble installing the Rubyweaver 2.0 extension (available from
    http://rubyweaver.gilluminate.com/)
    which should add ruby and rails functionality to DW. According to
    Extension Manager it is installed fine but when I try to use DW I
    get the following problems:
    1. On startup DW throws up a warning message:
    quote:
    The Document Type "" will not be added because it uses a file
    extension that is already associated with a prior document type.
    This message appears three times, I assume for
    three different document types.
    2. Rails, YML and SQL options are not present in the New
    Document window options (they should be).
    3. Preferences > Code Format > Tag Library Editor
    displays an option called 'Rails' - even when the checkbox is
    ticked, HTML colouring is not present in .rhtml files.
    I contacted the developer about these issues, he assured me
    that the extension was developed for and tested on both Windows and
    OS X platforms, and that nobody else had reported any problems. He
    suggested it must be a problem specific to my system.
    So, here's my question: has any one else experienced problems
    installing either this or another extension in DW MX2004 on a Mac
    and does anyone have a solution/work around.
    Thanks in advance for any help.

    Hi,
    Yes, I'm having the same difficulty when installing FM Web
    Studio by FMWebSchool.com. I get the [empty] "Document type could
    not be added" error 33 times on application launch. I see no
    templates, no dynamic page creation options.
    PS. Edited to note I'm on MacOS 10.4.10, PowerPC, DW MX2004
    quote:
    Originally posted by:
    mpjx
    Hi all,
    I run DW MX2004 under OS X 10.4.10 on a Mac. I'm having
    trouble installing the Rubyweaver 2.0 extension (available from
    http://rubyweaver.gilluminate.com/)
    which should add ruby and rails functionality to DW. According to
    Extension Manager it is installed fine but when I try to use DW I
    get the following problems:
    1. On startup DW throws up a warning message:
    quote:
    The Document Type "" will not be added because it uses a file
    extension that is already associated with a prior document type.
    This message appears three times, I assume for
    three different document types.
    2. Rails, YML and SQL options are not present in the New
    Document window options (they should be).
    3. Preferences > Code Format > Tag Library Editor
    displays an option called 'Rails' - even when the checkbox is
    ticked, HTML colouring is not present in .rhtml files.
    I contacted the developer about these issues, he assured me
    that the extension was developed for and tested on both Windows and
    OS X platforms, and that nobody else had reported any problems. He
    suggested it must be a problem specific to my system.
    So, here's my question: has any one else experienced problems
    installing either this or another extension in DW MX2004 on a Mac
    and does anyone have a solution/work around.
    Thanks in advance for any help.

  • SQL 2008 R2 In-Place Upgrade or Fresh Install to SQL2104

    We have a server running Windows 2008 R2 and SQL 2008 R2 currently.  We will call it SQL01.  This houses databases for about 8 different applications and also has the name hard coded into a lot,  I repeat, a lot of various things.
    We are at the point where one of our applications needs to be upgraded and it only works with SQL 2014.  So we need to either do an in-place upgrade or fresh install.
    The obvious choice to me as a system admin is to do a fresh install, but the development side of the department knows how many places the name "SQL01" is hard coded and they want to do an in-place upgrade to avoid all the issues that would show
    up if we changed names.
    I have several questions, and I'd appreciate that the answers address them all if possible.
    1.  What are people's experiences with in-place upgrades from SQL 2008 R2 to SQL 2014?
    2.  To avoid this naming and coding issue, do companies use a permanent alias for their SQL servers?  Like with exchange, we have an alias or A record pointing "mail" to the current Exchange server.  As we do upgrades and the Exchange
    server names change, the "mail" entry will always be pointed to the current one.  Do people do this for SQL as well to avoid our issue of hard coding names?
    3.  I've head that you can also have both SQL 2008 R2 and SQL 2014 on the same server running together.  This really doesn't help though if the SQL 2014 instance would need to be something other than the default which everything is currently pointed
    to correct?
    4.  Is there any advice about a better way to go about this?  Or a better way to do this moving forward?  Other than not hard coding which I can't change now?
    Thanks!

    Hello,
    Adding to the answers provided above, please consider discontinued features no longer available on SQL Server 2014.
    I often see company configuring SQL Server aliases when installing SQL Server on SharePoint environments. You can certainly use DNS or use the following article.
    http://msdn.microsoft.com/en-us/library/ms190445.aspx
    An in-place upgrade is easier but is difficult to rollback in case something goes wrong. Meanwhile, a side-by-side upgrade provides you more control over what is upgraded, it keeps the legacy server online during the upgrade allowing you to easy rollback if
    needed, but is not an automated process and the instance will not keep the same name, requiring you to use aliases or other ways to avoid client redirection.
    Since you cannot change the application, go for a side-by-side upgrade and try the DNS alias or the client-side alias as I provided the procedure above.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Issues compiling network libs on install

    Greetings:
         I am having issues compiling ntcontab.o upon install of 9i
    on a sun box. I'm running 2.8 and have gcc3.2 on the box.
         Upon manually making the same file, the following output exists.
    Please advise!
    bash-2.05$ make -f ins_net_client.mk ntcontab.o
    (if [ "assemble" = "compile" ] ; then \
    /usr/local/oracle/bin/gennttab > ntcontab.c ;\
    cc -c ntcontab.c ;\
    rm -f /usr/local/oracle/lib/ntcontab.o ;\
    mv ntcontab.o /usr/local/oracle/lib ;\
    /usr/ccs/bin/ar rv /usr/local/oracle/lib/libn9.a /usr/local/oracle/lib/ntcontab.o ; fi)
    (if [ "assemble" = "assemble" ] ; then \
    /usr/local/oracle/bin/gennttab > ntcontab.s ;\
    /usr/ccs/bin/as -xarch=v9 -P -o ntcontab.o ntcontab.s ;\
    rm -f /usr/local/oracle/lib/ntcontab.o ;\
    mv ntcontab.o /usr/local/oracle/lib ;\
    /usr/ccs/bin/ar rv /usr/local/oracle/lib/libn9.a /usr/local/oracle/lib/ntcontab.o ; fi)
    ntcontab.s: Assembler messages:
    ntcontab.s:23: Error: Unknown opcode: `alword'
    ntcontab.s:23: Error: Rest of line ignored. First ignored character is `\'.
    ntcontab.s:24: Error: Unknown opcode: `alword'
    ntcontab.s:24: Error: Rest of line ignored. First ignored character is `\'.
    ntcontab.s:25: Error: Unknown opcode: `alword'
    ntcontab.s:25: Error: Rest of line ignored. First ignored character is `\'.
    ntcontab.s:26: Error: Unknown opcode: `alword'
    ntcontab.s:31: Error: Unknown opcode: `string'
    ntcontab.s:33: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:35: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:37: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:39: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:41: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:43: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:45: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:47: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:49: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:51: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:53: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:55: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:57: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:59: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:61: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:63: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:65: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:67: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:69: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:71: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:73: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:75: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:77: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:79: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:81: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:83: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:85: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:87: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:89: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:91: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:93: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:95: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:97: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:99: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:101: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:103: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:105: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:107: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:109: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:111: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:113: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:115: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:117: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:119: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:121: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:123: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:125: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:127: Erntcontab.s:131: Error: bad or irreducible absolute expression; zero assumed
    ntcontab.s:135: Error: Unknown opcode: `data'
    ntcontab.s:140: Fatal error: Unknown opcode: `ntcon_record(.RINI, ntrini,.RINI2,.RINI3)'
    mv: cannot access ntcontab.o
    ar: cannot open /usr/local/oracle/lib/ntcontab.o
    No such file or directory
    (if [ "assemble" = "oratmp" ] ; then \
    /usr/local/oracle/bin/gennttab > ntcontab.c ;\
    /lib/idcpp ntcontab.c oratmp.c ;\
    -i oratmp.c -o oratmp.s -f ntcontab.c ;\
    /usr/ccs/bin/as -o ntcontab.o oratmp.s ;\
    rm -f oratmp.c oratmp.s ;\
    rm -f /usr/local/oracle/lib/ntcontab.o ;\
    mv ntcontab.o /usr/local/oracle/lib ;\
    /usr/ccs/bin/ar rv /usr/local/oracle/lib/libn9.a /usr/local/oracle/lib/ntcontab.o ; fi)
    (if [ "assemble" = "binary" ] ; then \
    /usr/local/oracle/bin/gennttab > ntcontab.c ;\
    TARGET_BINARY_INTERFACE= ;\
    export TARGET_BINARY_INTERFACE ;\
    cc -c ntcontab.c ;\
    -rm -f /usr/local/oracle/lib/ntcontab.o ;\
    -mv ntcontab.o /usr/local/oracle/lib ;\
    /usr/ccs/bin/ar rv /usr/local/oracle/lib/libn9.a /usr/local/oracle/lib/ntcontab.o ; fi)
    bash-2.05$

    I think I know what the problem is ...
    So you have Mac OS 10.5.1 ... that's Darwin 9.
    But your dev tools came with Darwin 8 ... 10.4. I mean, what's going on is that the linker is trying to link the System.dylib to your code using the Darwin 8 System.dylib. It opens the dylib, but hates what it finds in the Mach-O _TEXT_ section.
    So, I bet you had a 10.4 machine, installed the 10.4 dev tools at some point, upgraded the machine to 10.5, but you haven't yet installed the 10.5 dev tools.
    My bet is that if you install the 10.5 dev tools, you should be okay. Woolamaloo uses the same C code ... and it does compile in 10.5 using the 10.5 dev tools. Honest.

  • Autoconfig issue after upgrading 12.1.1 to 12.1.3

    Hi all,
    I am getting below mention autoconfig issue after upgrading 12.1.1 to 12.1.3.
    jtfictx.sh started at Mon Mar 28 08:28:50 EDT 2011
    SQL*Plus: Release 10.1.0.5.0 - Production on Mon Mar 28 08:28:50 2011
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Enter value for 1: Enter value for 2: Enter value for 3: Connected.
    DECLARE
    ERROR at line 1:
    ORA-29858: error occurred in the execution of ODCIINDEXALTER routine
    ORA-20000: Oracle Text error:
    DRG-10561: index JTF_AMV_ITEMS_URL_CTX is not valid for requested operation
    ORA-06512: at "CTXSYS.DRUE", line 160
    ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 665
    ORA-06512: at "SYS.DBMS_SQL", line 1199
    ORA-06512: at line 96
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Product
    ion
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    jtfictx.sh exiting with status 1
    ERRORCODE = 1 ERRORCODE_END
    .end std out.
    .end err out.
    i got below mention some solution from metalink, but that does not working.
    https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=743720.1
    according to note we need to create index but its giveing below metion error.
    SQL> @jtfiaibu.sql jtf jtf apps
    Connected.
    DECLARE
    ERROR at line 1:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-20000: Oracle Text error:
    DRG-10758: index owner does not have the privilege to use file or URL datastore
    ORA-06512: at "CTXSYS.DRUE", line 160
    ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
    ORA-06512: at "SYS.DBMS_SQL", line 1199
    ORA-06512: at line 37
    Thanks in advance,
    Sandeep.

    Hi,
    DRG-10561: index JTF_AMV_ITEMS_URL_CTX is not valid for requested operationPlease make sure you have no invalid objects. And also please see of these helps. I know these are for older version, but please check
    Script jtfictx.sh Failed While Attempting To Run The Autoconfig On APPS Tier [ID 1271186.1]
    Autoconfig Returns ORA-29868 from jtfictx.sh [ID 386740.1]
    By the way did u iinstall companion/examples CD after installing OracleSoftware
    Thanks,
    Taher

  • Error installing Extension Manager 6.0.5 update

    I am unable to install Extension Manager 6.0.5 Update.  The installation is unsuccessful.  The Error Code is U44M1I0

    Hi Swila,
    To help us solve the issue, could you please provide the following info?
    1. Have you ever changed or removed files in the Extension Manger installation folder?
    2. The current version of your Extension Manager.
    3. Platform and the OS version that you are working in( Windows7, Windows8, Mac OS X10.7, 10.8, … )
    4. Please generate installation log with the steps below, and send the log files to [email protected]
    Windows
    1. Open Command Prompt window.
    2. Run command: cd %temp%
    3. Run command: echo > ribs3debug
    4. After that a new file named "ribs3debug" should have been created in temp folder.
    5. Update Extension Manager CS6, via Adobe Application Manager or running updater installer manually.
    6. The log file "X:\Program Files (x86)\Common Files\Adobe\Installers\Adobe Extension Manager CS6 xxxx.log.gz" will be created( check the create date of the file and make sure it is the log of your patch installation ).
    Mac
    1. Open a Terminal window.
    2. Run command: cd /tmp
    3. Run command: touch ribs3debug
    4. After that a new file named "ribs3debug" should have been created in /tmp folder.
    5. Update Extension Manager CS6, via Adobe Application Manager or running updater installer manually.
    6. The new log file "/Library/Logs/Adobe/Installers/Adobe Extension Manager CS6 xxxx.log.gz" will be created( check the create date of the file and make sure it is the log of your patch installation ).
    A workaround of this issue is, manually deleting the instllation folder of Extension Manager( C:\Program Files (x86)\Adobe\Adobe Extension Manager CS6 in windows or /Applications/Adobe Extension Manager CS6 in mac ), then downloading the Extension Manager 6.0.4 from http://www.adobe.com/exchange/em_download/, installing it and try updating it again.
    Thanks,
    Xiaoyi

  • CS5 extended upgrade doesn't install over CS5

    Trying to install a purchased CS5 extended upgrade over an installed CS5: DVD loads, and says "CS5 already installed".  I notice that the icon on
    the disk doesn't call itself "extended" -- it is as though the disk, though labelled correctly on the box, doesn't actually contain the extended version.
    I've tried the "chat" method of help from Adobe -- which is frustrating in many ways -- and they at least claimed that the serial number was correct.  If I
    continue the installation, it will, in about a minute, put in a few things, including an older version of ACR, but Photoshop itself is unchanged, and certainly
    not the extended version. 
    Anyone who has done this successfully, did the icon on the installer call itself "CS5 extended"?
    The "chat" helper tried to establish an "adobe connect" session, without success.  I'm very afraid to uninstall my CS5, on which I
    depend! -- because then the upgrade installer may say " no product to upgrade!"    Short of another solution, I guess I am
    out my 384 dollars.
    Don't know what to do next!

    Steve --
    The chat, though it came up quickly enough, was frustrating in that
    a. It was hard to make them understand the problem
    b. Every time I went to do something they suggested, the chat was
    lost and I had to start all over again (that's why it was "they").
    Finally, I realized that I could tell them the case # so they could
    get up to speed.  But they continued to ask the same questions over
    again. We never got to any possible solution.
    c. The real issue is that I didn't understand that "extended" was the
    same program, so I don't think my problem made sense to them.
    I did (with some trepidation) deactivate, and the reactivation worked
    fine.  If I had downloaded the upgrade from Adobe, I think the situation
    would have been clear, but because I bought a boxed DVD, I assumed that
    it was a "different" program, as it was when I upgraded my wife's CS4 to
    CS5.
    Anyway, I'm all set now, and thanks again for your assistance and
    suggestions.

  • VM in Running (Installing Extensions) state - it seems it's failing to enable the Microsoft.Azure.Diagnostics.IaasDiagnostics plugin

    My VM is in the follow state "Running (installing extensions) state. In the dashboard it appears that the IaasDiagnostics extension is not enabled. The message displayed in the dashboard is:
    Enable failed for plugin (name: Microsoft.Azure.Diagnostics.IaaSDiagnostics, version 1.2.0.0) with exception Command C:\Packages\Plugins\Microsoft.Azure.Diagnostics.IaaSDiagnostics\1.2.0.0\DiagnosticsPluginLauncher12.exe of Microsoft.Azure.Diagnostics.IaaSDiagnostics has exited with Exit code: -3
    How can I get this working?

    Hi,
    Thanks for your feedback.
    Can you RDP into the VM? If yes, you can check the log in the path below to see if you can find any root reason for this issue:
    C:\WindowsAzure\Logs\WaAppAgent.log
    I also tried to use the Remove-AzureVMDiagnosticsExtension cmdlets to do that and got the same results as yours:
    I am sorry to say that I haven't found any ways to remove the DiagnosticsExtension in Azure PowerShell at present. I recommend you to feeback this on the Azure feedback
    link below:
    http://feedback.azure.com/forums/216843-virtual-machines
    By the way, you can access the
    preview portal by going to Browse Virtual Machines, select the VM, select
    Extensions, select the extension to remove and click Delete. After it has been deleted, go back and select
    Add and add it back.
    In addition, if you restart the VM and still encounter this issue, please contact Azure support by requesting a support ticket in the link below:
    http://azure.microsoft.com/en-us/support/options/
    Best regards,
    Susie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Maybe you are looking for

  • Issue while creating a multiline custom settype

    Hi, I have encountered a strange problem recently when creating custom set types. When a multi line custom set type is created (i.e. one of the atttributes assigned to the set type is set as key), I have found that out of all function modules that ge

  • Installing Aperture 3 onto new MacBook Pro

    Hi Support Team, I own a copy of Aperture 3.0 (on disk); I bought the software back in 2010 when it was first released and have been running the software on my MacBook Pro (2009 model). Now, I have bought the new MacBook Pro Retina and installed Moun

  • Dock not accepting folders

    Hi, After installation, I took out the two folder stacks that existed (didn't want downloads or documents to be in there). No problem at that point. NOW, however, I would like to place some stacks of my own in the dock and it is not accepting any fol

  • Fund managment exceeding the budgeted and committed items

    Dear All, In my client place we implement the fund management.  we create the department wise fund center and related committed items. For example for the Fund center Administration Expenses- Committed item is Advertising expenses.  When ever i made

  • Audio Fades

    just upgraded from CS3 to CS4. Tried doing both power and gain audio crossfade on cs3 and cs4, but nothing works. The volume is always at "max" and there is no fade. I also tried the log fade on CS4 , but nothing. Should "volume" always be an audio e