Issue keeping e72 email client connected and email...

Just got my e72 (software version 031.023 / custom version 031.023.244.02) I have made no changes to the phone other than running software update and configuring my gmail in messaging.
I configured my email as follows:
Menu / Messaging / New Mailbox
I am asked "no mailbox defined. define now?" I select "yes"
I start an email configuration wizard. I select "start"
I select "gmail". I enter my address and password.
Before connecting, I select "options / settings / mailbox settings / When to sync"
I change "update interval to 5 minutes" and change "retrieve when abroad to "enabled"
I click "back"
I click "Mailbox settings / Advances mailb. settings / Incoming mail settings"
I change "access point in use" to my local wifi AP
I click "back"
I click "Outgoing email settings"
I change "access point in use" to my local wifi AP
I click "back", "back", "back"
I am back at the main mailbox view
I click "options / connect"
It syncs up and I see my mail. The green circle in the upper right hand corner of the mailbox view stays green. Syncing works great (I get test email against the box in seconds)
Now - I don't move away from wifi AP (its 10 feet away). I let my phone sit idle for a while. I stop getting emails and when I go to the mailbox view I see the red circle in the upper right hand corner. I don't get any new emails until I manually select "connect" again in the "options" menu.
What am I doing wrong?
Why in the mail client disconnecting?
Should the mail client reconnect when it does disconnect?
In the event of a disconnect, becuase I selected "update interval to 5 minutes" in the steps a stated above, shouldn't it at least reconnect after 5 minutes?

Hi
i am not familiar with Yahoo and not even up to date with E72.
Try to delete the email account in E72 and set it up again. This time, deny Nokia services or something like that when configuering the email account.
Do the settings manual instead and then you get the possibilities to configure folders to see.
Perhaps I misunderstand what you want to do to.
I personally have droped Yahoo in 2009 and even Gmail recently due to due to reasons concerning safety and integrity...
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

Similar Messages

Flash Player download keeps failing with lost connection and then gives up. satellite Internet connection

Win XP. Firefox 34.0.5 (latest)
The Flash Player download keeps failing with lost connection and then gives up.I am on a satellite Internet connection.
It seems to be extremely slow even when loading the installer which is only 1MB. Then when I run the installer and it starts to download the installation there are frequent messages about losing the connection and then finally gives up.
I have had problems with other software failing when I am on a satellite link. This is most likely because of the huge latency which may be taken as a link failure. Ping times are typically 800ms but can be 2000ms sometimes!

Hello,
The online shim installer, which you are using actually downloads and installs Flash Player silently in the background. If your satelite connection is experiencing latency issues it could result in the failure to download. Please try the full installer posted at the bottom of the Installation problems | Flash Player | Windows page, in the 'Still having problems' section.
Maria

After updating to ios 8 i keep losing my internet connection, and have to restart every time?

After updating my ipad mini to ios 8, i keep losing my internet connection and have to restart.

Hi Turn Router off for 30 seconds Goto Settings Reset Network Settings After reset you need to enter your router wireless key. Also later check on website for a Firmware update for your router. Cheers Brian

You can't use The following message is stopping me access my disk utility. 'this version of the application "Disk Utility" with this version of OS X.' not only that my Mac pro keeps dropping my internet connection and logs on to BT Open.

After installing Yosmite, The following message is stopping me accessing my disk utility. 'You can't use this version of the application “Disk Utility” with this version of OS X.' you have “Disk Utility” 12.1.1.
not only that my Mac pro keeps dropping my internet connection and logs on to BT Open.
Help

For whatever reason you don't have the Yosemite version of Disk Utility which is 13. I suggest you reinstall Yosemite.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and install the 10.10.1 update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Check that you have the current version of Disk Utility.

Having issues keeping Apple Tv's connected to iTunes

I have 4 apple tv's throughout my home and cat6 ran to each room. I'm consistently having to restart itunes to connect to home sharing on them. Once restarted then they connect fine. Even is one is connected and playing a movie I have to restart for another to be able to play something causing other ones to disconnect. I have 3 apple tv2's and 1 apple tv3. I've Googled and searched for remedy's for the problem but I cant seem to find anything that fixes the issue. I've talk to apple support and the only thing they told me to do is make sure my hard drive on my pc don't go to sleep. I'm using an Airport Extreme for a router. Any idea's out there.

Is it probably better then to use the parental controls and set all of 'her stuff' to PG and allow PG films to the second AppleTV, as opposed to setting up a separate library.
Trying to get my head around it all still ... but head full of new iPhone from o2 ;o)

I keep getting this Cisco Connect and I want it permanently removed from my phone

I need to remove Cisco from my phone

It sounds like you maybe getting a notice about an unknown wifi connection . Cisco is a brand of wireless router . You could just turn off wifi where you are getting the notice or in wifi settings uncheck ask to connect and you will not get notifications every time you wander in range of a new wireless system if you plan on leavin your wifi on

WRV200 Wireless light keeps blinking, no clients connected.

Hi,
Sorry if this is a silly question, but im wondering why my linksys wrv200 wireless light on the router keeps blinking even though my wireless laptop is not turned on? I checked the router status and no other clients are connected so im puzzled as to why the wireless activity light is blinking which shows activity as per the manual.
Is this normal??
Thanks

The DHCP client table only contains the computers which requested an IP address from your router. Any device/computer with a static IP address will never appear in that list. You cannot tell if a wireless client with a static IP address is still connected or not.
Wireless clients may (more likely) appear in the wireless client list. I don't know if the WRV200 has it or not. Usually you'll find the wireless client list by going to the wireless MAC filter setup tab. Enable the filter if it is not enabled (no need to save the setting), press edit filter list, and it pops up a window where you have another button "wireless client mac list". That button shows you a window of active and inactive wireless clients with their IP address. Any static IP address client should appear there, too. (If the list is not there, search the manual for it...)
You could make another test: change the SSID temporarily on the router to something else. A longer random string. Setup WPA2 with a random preshared key. Save the settings. Disconnect all computers from the router. Still blinking? Unplug the modem connection from the router. Still blinking? If the router is still blinking with nothing wired to it and a wireless network that nobody knows (yet), well, that should clearly indicate a router problem (or at least a wireless light problem). If that is the case it should not be too hard to bring the router back to the shop and show them what is happening.Message Edited by gv on 12-18-200605:43 PM

I run Windows Vista 64 bit and just installed Firefox 4. I keep losing my Wireless connection and Firefox lost my Bookmarks, how can I fix it??

I also run Zone Alarm security

I had the exact same error message but it was on an Airport Extreme Base Station. I use a Macbook at my office and there are 2 XP desktops as well and we were using a shared storage hooked into the AEBS in order to share files. One day all of a sudden the XP machines starting displaying the same error message that NetBIOS should be enabled.
After googling every available article I discovered what ultimately solved our issue.
I opened the the Airport Utility app on my Macbook I clicked on "Manual Setup"
Then "Disks"
Then "File Sharing"
I discovered that the default name under "Workgroup" was Workgroup, but our network in the office is called "MSHome" so I changed it to match the PCs and instantly both PCs connected to the shared storage.
Also I changed the 2.4Ghz channel to a number other than the default 11.
I changed the name of the base station to a name less than 8 characters with no spaces and no symbols.
I changed the Wireless Security to "WPA/WPA 2 Personal".
I've been trying to add my fix to other Apple Support pages and they're all archived and closed to replies, so if you haven't gotten your TC to work, maybe this might help.

Some odd issues in arch recently (network connectivity and daemons)

Hello,
First off I want to address a more recent issue. This has to do with a strange network connectivity issue. It's only happened since last reboot. It may go away with a restart, but I don't know.
Recently I've installed XFCE. I enjoy it quite a bit so far, though there are some issues with powering off and mounting drives. I assumed this was a dbus error and looked into it. It seems dbus isn't working correctly for what ever reason. I'm not sure what the cause of this is. It's near the beginning of my daemon array. I am familiar with GDM's ability to work with gnome well without further configuration, so I thought that that might fix it, using GDM, that is. I installed it and went to start it, only to find that the GDM daemon in /etc/rc.d/ does not exist. I also went to install something called gamin which should have a daemon. This was missing as well. I suspect there's something off with my system.
D-Bus does appear to be broken as launching systemctl using sudo throws this error:
Failed to get D-Bus connection: No connection to service manager.
With the connection dying on my every 5 seconds, I was not able to find much about this error.
Help is greatly appreciated,
Dragos
EDIT: The network thing was fixed shortly after reboot.
Last edited by dragos240 (2012-12-14 02:03:48)

dragos240 wrote:Right. Uh. So, does anyone have any clue as to why my daemons aren't appearing?
Because you are not running systemd.
The vague answers you are getting are because it is clear to us you need to do some basic research regarding your problem.
Edit: Okay, now I see it is solved for you. You are probably now running systemd
Last edited by ewaller (2012-12-14 03:45:28)

HT201210 my iphone keeps losing the internet connection and it started after i updated it to ios 7.2 how do i fix it?

ive already tried making it new but it still looses connection, while im next to the router it works just fine but if i go to a room away from the router it doesnt work.

Try Resetting your Network Settings.
I had this issue on my 4S right after updating to iOS7. Weak WIFI Range.
Resetting the Network Settings brought it back to normal.

When I open Firefox, The tab keeps quickly flicking between "Connecting" and "New Tab". The browser will not connect to any site.

This occurred straight after visiting the isohunt site. I had a message saying "Firefox is preventing
IsoHunt from installing a program, will you allow?" (or words to that effect). I gave permission then the problem started.
I have used Firefox on my iMac for a long time without any problem. I'm running OS X 10.7.5
Hope you can help

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
You can use one of these to start Firefox in <u>Safe mode</u>:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
If it does work in Firefox Safe-mode then disable all extensions (Tools > Add-ons > Extensions) and then try to find which is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Laptop keeps making device connect and Device disconnect sound.

My windows 8 laptop(IdeaPad U310) keeps making this device connect and disconnect noises.
I have hooked my laptop to a external display. These noises start when the display turns off after being idle for sometime.
My Event log is filled with even IDs 9020 and 9009 alternating every minute. I couldn't find any information online.
Link to image 1
Link to image 2
Link to image 3
Moderator note: images totalling more than 50k converted to links per forum rules: Lenovo Community Participation Rules

hi koushikt,
Welcome to the Forums.
The Desktop Window Manager is a part of Windows 8 that manages the aero effects (i.e. Aero Peek, Window Coloration, etc.). From the screenshots that you posted, it looks like a problem with DWM itself as discussed in this microsoft article.
Can you try to:
1. Run Windows Updates to get the latest patch and bug fixes for your OS.
2. Update your display driver (if you have Intel HD 4000 Graphics, get it here)
3. Disable visual effects and reboot.
Let me know your findings,
neoeknchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

AP541N-E-K9 keeps dropping all WLAN connections

I hope someone could shed some light on an issue we have with our AP541N-E-K9 on the latest firmware.
Our issue sounds similar to this thread:
https://supportforums.cisco.com/thread/2028334
Our AP541N-E-K9 keeps dropping all WLAN connections and will not allow us to connect via WIFI. I have to switch the unit off and on but even so sometimes it will take 10 mins for the WLAN to accept new connections. Nothing has changed on the network for months as it is a very basic scenario ie Draytek DSL Router -> Cat5e cable -> AP541N-E-K9, thats it! The AP is really only used for guest access and may have about 15 staff connected via WIFI at any one time.
Thanks

Hi Alena,
I've changed the access point to use channel 1 which seemed to work for about 5 mins and then all wireless devices have dropped off and the even log keeps showing:
Apr 30 16:39:09 info hostapd wlan0: IEEE 802.11 STA 40:30:04:4b:e4:1e deauthed from BSSID 64:ae:0c:ea:ca:40 reason 3
Apr 30 16:39:09 info hostapd wlan0: IEEE 802.11 STA 14:74:11:76:97:24 deauthed from BSSID 64:ae:0c:ea:ca:40 reason 1
Apr 30 16:39:09 info hostapd wlan0: STA 14:74:11:76:97:24 WPA: pairwise key handshake timed out (no reply was received for the first message)
Apr 30 16:39:09 info hostapd The wireless client with MAC address 14:74:11:76:97:24 had an authentication failure.
Apr 30 16:39:09 info hostapd wlan0: IEEE 802.11 STA 40:30:04:4b:e4:1e deauthed from BSSID 64:ae:0c:ea:ca:40 reason 1
Apr 30 16:39:09 info hostapd wlan0: STA 40:30:04:4b:e4:1e WPA: pairwise key handshake timed out (no reply was received for the first message)
Apr 30 16:39:09 info hostapd The wireless client with MAC address 40:30:04:4b:e4:1e had an authentication failure.
Apr 30 16:39:02 info hostapd wlan0: IEEE 802.11 Assoc request from 70:d4:f2:1a:ec:3d BSSID 64:ae:0c:ea:ca:40 SSID Skyfire
Apr 30 16:39:02 info hostapd wlan0: IEEE 802.11 STA 70:d4:f2:1a:ec:3d deauthed from BSSID 64:ae:0c:ea:ca:40 reason 3
Apr 30 16:39:02 info hostapd wlan0: IEEE 802.11 Assoc request from 70:d4:f2:1a:ec:3d BSSID 64:ae:0c:ea:ca:40 SSID Skyfire
Apr 30 16:39:02 info hostapd wlan0: IEEE 802.11 STA 14:74:11:76:97:24 associated with BSSID 64:ae:0c:ea:ca:40
Apr 30 16:39:02 info hostapd wlan0: IEEE 802.11 Assoc request from 14:74:11:76:97:24 BSSID 64:ae:0c:ea:ca:40 SSID Skyfire
Apr 30 16:39:02 info hostapd wlan0: IEEE 802.11 STA 14:74:11:76:97:24 deauthed from BSSID 64:ae:0c:ea:ca:40 reason 3
Apr 30 16:39:02 info hostapd wlan0: IEEE 802.11 STA 40:30:04:4b:e4:1e associated with BSSID 64:ae:0c:ea:ca:40
Apr 30 16:39:01 info hostapd wlan0: IEEE 802.11 Assoc request from 40:30:04:4b:e4:1e BSSID 64:ae:0c:ea:ca:40 SSID Skyfire
Apr 30 16:39:01 info hostapd wlan0: IEEE 802.11 STA 40:30:04:4b:e4:1e deauthed from BSSID 64:ae:0c:ea:ca:40 reason 3
Apr 30 16:39:01 info hostapd wlan0: IEEE 802.11 Assoc request from 40:30:04:4b:e4:1e BSSID 64:ae:0c:ea:ca:40 SSID Skyfire

I receive the error, "No Internet Connection" and my Adobe Creative applications are crashing on a regular basis.

I keep getting the same errors with the damn Creative Cloud application on my Windows 7 machine, which IS connected to a LAN and IS actively connected to the internet at the time the error routinely appears in the midst of tasks. I have checked root certificates, manually checked my hosts file and run the tests outlined above to both Adobe addresses.
In fact, the error kept occuring while I was on an over 3-1/2 hour call with a very through and nice representative from Adobe who had remote screen access at the time (through Adobe connect) and could see the error repeatedly occuring!
Her comment, "This just happens sometimes with this application and there's not a patch for it yet", The problem I was having with Photoshop CS6 and Photoshop CC was so severe that I had to do a SYSTEM RESTORE which then started affecting other Adobe applications because Windows had erased part of the programs (or all of some programs) but Adobe's software saw them as still installed, that she had me uninstall ALL Adobe Creative Cloud applications using the Adobe Cleaner Tool and reinstall everyting from SCRATCH. She and I had tried numerous other ways to repair the problems I was having with updates not installing correctly AND constant program freezing, etc. before this taking this extreme step.
I'm a professional programmer / software / web designer, so I had tried for hours correct the issues the previous night and had tried once overnight to reach someone in Adobe support only to be told of over an hour wait time by the automation and not offered a callback.
Anyway, despite her best assistance this afternoon (and double confirmation that everything tested correctly), it has taken, so far, well over six hours to reinstall only a portion of what I need for my work and on a deadline because the application keeps reporting "No Internet Connection" and I have programs cued to install unattended. I am now way behind schedule on some design projects which MUST BE COMPLETED by deadline and require Adobe's software to be installed and function correctly.
Adding to this, Windows Explorer has repeatedly crashed after installing the damn Creative Cloud application and works normally when it's removed and "cleaned" ... and I've seen so many problems with the install system, etc. that I have to wonder what in the hell the company was thinking when this approach was launched?
I generally have liked -- and indeed loved -- some of Adobe's products in the past, but the recent experience has certainly been costly in time and disappointing.
Many other software manufacters integrate suites, perform updates and confirm licenses without such a buggy, time intensive and unreliable process -- including my own company.
Aside from complaining at this point, I wish somebody from Adobe would provide alternative install methods and / or a fullproof fix for this bug and some of the other installation bugs many of us experience. Any thoughts, advice, knowing that not only I -- but also the Adobe Support Staff Person accessing my computer LIVE -- tried the various "fixes"?

Branching this to a new discussion as the previous discussion was related to the inability to connect and download the installation software.
Rob it does sound like you are facing some connection and stability difficulties. Do you manage your network youself? I am a bit concerned by the fact that you have stated that you periodically loose Internet connection while completing certain tasks. Does this affect your ability to utilize the already installed Adobe Creative software?
I would also recommend reviewing your installation logs to determine if any errors occured during the installation process. Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files. Please feel free to post any specific errors you discover to this discussion thread.

Thin Client connection not failing over

I'm using the following thin client connection and the sessions do not failover. Test with SQLPLUS and the sessions do fail over. One difference I see between the two different connections is the thin connection has NONE for the failover_method and failover_type but the SQLPLUS connection show BASIC for failover_method and SELECT for failover_type.
Is there any issues with the thin client the version is 10.2.0.3
jdbc:oracle:thin:@(description=(address_list=(load_balance=YES)(address=(protocol=tcp)(host=crpu306-vip.wm.com)(port=1521))(address=(protocol=tcp)(host=crpu307-vip.wm.com)(port=1521)))(connect_data=(service_name=ocsqat02)(failover_mode=(type=select)(method=basic)(DELAY=5)(RETRIES=180))))

You have to use (FAILOVER=on) as well on jdbc url.
http://download.oracle.com/docs/cd/B19306_01/network.102/b14212/advcfg.htm#sthref1292
Example: TAF with Connect-Time Failover and Client Load Balancing
Implement TAF with connect-time failover and client load balancing for multiple addresses. In the following example, Oracle Net connects randomly to one of the protocol addresses on sales1-server or sales2-server. If the instance fails after the connection, the TAF application fails over to the other node's listener, reserving any SELECT statements in progress.sales.us.acme.com=
(DESCRIPTION=
*(LOAD_BALANCE=on)*
*(FAILOVER=on)*
(ADDRESS=
(PROTOCOL=tcp)
(HOST=sales1-server)
(PORT=1521))
(ADDRESS=
(PROTOCOL=tcp)
(HOST=sales2-server)
(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=sales.us.acme.com)
*(FAILOVER_MODE=*
*(TYPE=select)*
*(METHOD=basic))))*
Example: TAF Retrying a Connection
TAF also provides the ability to automatically retry connecting if the first connection attempt fails with the RETRIES and DELAY parameters. In the following example, Oracle Net tries to reconnect to the listener on sales1-server. If the failover connection fails, Oracle Net waits 15 seconds before trying to reconnect again. Oracle Net attempts to reconnect up to 20 times.sales.us.acme.com=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=tcp)
(HOST=sales1-server)
(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=sales.us.acme.com)
*(FAILOVER_MODE=*
*(TYPE=select)*
*(METHOD=basic)*
*(RETRIES=20)*
*(DELAY=15))))*

Issue keeping e72 email client connected and email...

Similar Messages

Maybe you are looking for