Issue on DBCA
hi everyone,
im trying to create a database for 3 node cluster using DBCA during database creation when it reaches 70% i get blank or empty pop up window with no warnings or errors when i click ok it stops the database creation. I m using ASM for file management and all datafiles will go to data. It looks like it creates datafiles in data but when it about to create instance it give me this error. Please let me know what should i have to do. i tried on single node and for file storage i used local storage and it created the databas but when i tried for all 3 nodes then it happens. Please guide me. thnx
Hi user652788
To verify whether your system meets all of the criteria for creating a database or for making a database configuration change, use the pre-check command for the Database Configuration stage as follows:
cluvfy stage -pre dbcfg -n node_list -d oracle_home [-verbose]
Can you please give us the result of that command ?
Thanks
Similar Messages
-
Hello I am trying to create dbconsole but when I ran dbca it is throwing this error. I have X session open and exported my display. I also tried creating the dbconsole manually it did not work.
I am on Linux x86_64
DB version = 10.2.0.4
Em Configuration Assistant version = 10.2.0.1
$ dbca
Can't get a listener LISTENER Exception: oracle.net.config.ListenerException: TNS-04412: A problem reading or writing an address
caused by: oracle.net.config.SOExceptionConfig: TNS-04413: A shared object was found in the subtree
Xlib: connection to "localhost:11.0" refused by server
Xlib: PuTTY X11 proxy: MIT-MAGIC-COOKIE-1 data did not match
Exception in thread "main" $
Thanks$ lsnrctl service
LSNRCTL for Linux: Version 10.2.0.4.0 - Production on 19-MAY-2010 16:11:44
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=az18u2995.dcwshared.honeywell.com)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "SMTAQ" has 1 instance(s).
Instance "SMTAQ", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "SMTAQXDB" has 1 instance(s).
Instance "SMTAQ", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: az18u2995.dcwshared.honeywell.com, pid: 30623>
(ADDRESS=(PROTOCOL=tcp)(HOST=az18u2995-fwd.dcwshared.honeywell.com)(PORT=23975))
Service "SMTAQ_XPT" has 1 instance(s).
Instance "SMTAQ", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully
$
$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.4.0 - Production on 19-MAY-2010 16:11:20
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=az18u2995.dcwshared.honeywell.com)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.4.0 - Production
Start Date 19-MAY-2010 15:10:10
Uptime 0 days 1 hr. 1 min. 10 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/10.2.0/network/admin/listener.ora
Listener Log File /oracle/10.2.0/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=az18u2995-fwd.dcwshared.honeywell.com)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC0)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "SMTAQ" has 1 instance(s).
Instance "SMTAQ", status READY, has 1 handler(s) for this service...
Service "SMTAQXDB" has 1 instance(s).
Instance "SMTAQ", status READY, has 1 handler(s) for this service...
Service "SMTAQ_XPT" has 1 instance(s).
Instance "SMTAQ", status READY, has 1 handler(s) for this service...
The command completed successfully
$ env | sort
_=*1828*/bin/env
ASTFEATURES=UNIVERSE - ucb
A__z="*SHLVL
DISPLAY=localhost:11.0
EDITOR=vi
G_BROKEN_FILENAMES=1
HISTSIZE=1000
HOME=/home/oracle
HOSTNAME=az18u2995.dcwshared.honeywell.com
INPUTRC=/etc/inputrc
LANG=en_US.UTF-8
LESSOPEN=|/usr/bin/lesspipe.sh %s
LOGNAME=oracle
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
MAIL=/var/spool/mail/oracle
MSM_HOME=/usr/local/MegaRAID Storage Manager
MSM_PRODUCT=MSM
ORACLE_BASE=/oracle
ORACLE_HOME=/oracle/10.2.0
ORACLE_SID=SMTAQ
PATH=/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/oracle/bin:/usr/bin/X11R6:/sbin:/oracle/10.2.0/bin
PWD=/oracle/10.2.0/network/admin
SHELL=/bin/ksh
SHLVL=1
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
TERM=xterm
TNS_ADMIN=/oracle/10.2.0/network/admin
USER=oracle -
Hi,
on 9.2.0 on Linux Redhat, when I issue :
./dbca
I have :
[oracle@server]$ ./dbca
/Data/oracle/d01/visdb/9.2.0/JRE/bin/../lib/i686/green_threads/libzip.so: symbol
errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
(libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VMThanks for help.Metalink note: 264178.1 - RUNINSTALLER FAILS ON RED HAT 3 TRYING TO INSTALL ORACLE9I
Note 252217.1 - Requirements for Installing Oracle 9iR2 32-bit on RHEL3
Note 266343.1 - GLIBC_2.0 is not defined in file libc.so.6 -
Install of Oracle 10g on RHEL 4 AS (newbie)
This is one the toughest installs I've ever done. I'm new to Oracle so bear with me. I'm trying to install Oracle 10g on a RHEL 4 AS system. I started out installig on a RHEL 5 sever but felt that I might be in over my head since it wasn't certified for RHEL 5.
I've successfully installed Oracle 10g on a RHEL 4 AS machine. During my installation I used the "Advanced & Custom" install. I selected this option to install software only. I wanted to learn the implmentation of Oracle and the creation of databases. I'm now trying to start the Oracle/DBMS service and the listener. I've been tyring to get isqlplus to work via the Mozilla browser but I've not been able to login. I enter in the following url "http://oracleserver:5561/isqlplus". I receive the logon screen asking for a usename and password. I don't recall entering in a username other than the default of "dba" and a password. Is this what I should be using on this screen? I'm also being asked to enter in a "Connect Identifier" what does this mean. I don't recall entering in a "Connect Identifier" as part of the installation? When I enter in the "dba" username and password I get the following message:
ERROR - ORA-12162: TNS:net service name is incorrectly specified
What does this mean and what should I be entering?
I was successful at getting the listener to start.
I'm I having problems becuase of my installation process of "Advance, Custom, Software Only". My expectations where that a template database would be created and I would be able to use a GUI interface going forward to configure the system. Very much what you would see when installing SQL 2005 in a Windows environment.
Please work with me to get things working. I really want to learn this.
ThanksWhen you perform the install software only, it means so, Software Only. So no database template, no default environment. You'll have to define this on your own. It could be by means of dbca or manually.
isqlplus could start, but it doesn't have any database to connect to. The username/password and database service you are being prompted are the connect descriptor to an existing database and a database user/password. At this time none of them exist.
I could tell you, you are doing well, your listener and isqlplus are properly working, so next step, create your database.
As stated above, just issue the dbca command from the os prompt and go through the assistant.
~ Madrid. -
Create a second database from an existing ORACLE_HOME
DB Version:11.1.0.6.0
OS : AIX
We have a database running for an OLTP test environment. We need to create another database of same version (11.1.0.6.0) for Datawarehousing needs. The init.ora parameter are going to be different for this. So we need to create another database.
We are having some issues with dbca due to some JAVA related errors. So, we need to use the 'CREATE DATABASE' statement.
This is what i am going to do.
1. create an init.ora file for the new db and copy it to $ORACLE_HOME/dbs
2. Set the env variables
export ORACLE_HOME=/u01/oracle/product/11.1.0/db_1
export PATH=$PATH:$ORACLE_HOME/bin
export ORACLE_SID= <sid of the database which i am going to create>
3.
sqlplus / as sysdba
SQL> startup nomount pfile=$ORACLE_HOME/dbs/initora318.ora
4. Copy, Paste the Create Database statement.
Are these steps right?
I know that Enterprise Manager would not be configured using this method. But configuring EM shouldn't be a complex exercise.Right?
Edited by: N.Page on 11-Sep-2009 00:28Just a small note: You can save "database create scripts" from dbca in any other system(use the same main version please) if your db server has issues. In this way you can get the original scripts and you wont forget any steps...
-
DB Version:11.1.0.6.0
OS : AIX
This is related to threadi had started earlier.
Create a second database from an existing ORACLE_HOME
I'll just give you a background:
We have a database running for an OLTP test environment. We needed to create another database for Datawarehousing needs. The init.ora parameter are going to be different for this. So we had to create another database from the same ORACLE_HOME of the oltp database.
Since we were having some issues with dbca due to some JAVA related errors I manually created the DB using 'CREATE DATABASE' statement.
The database got created succefully. But the entry for this db is not there in oratab file. So, i am going to add this entry manually. This should be fine. Right?
Edited by: N.Page on 11-Sep-2009 05:04
corrected the URLN.Page wrote:
DB Version:11.1.0.6.0
OS : AIX
This is related to threadi had started earlier.
General Database Discussions
Which thread ?
The database got created succefully. But the entry for this db is not there in oratab file. So, i am going to add this entry manually. This should be fine. Right?Did you read the doc according to your OS ? If yes, then everything should be fine.
Nicolas. -
Hi guys!
When I try to launch dbca on unix command line this is the error I'm getting
Java.lang.NoClassDefFoundError
what's going on?
Thank you.what software are you using to view the GUI.
Unix machines are non-GUI , so it cannot display GUI applications.
So you have to use something like Reflection X , so that the GUI is displayed to your client.
start the software on your client
on the unix set the DISPLAY variable
export DISPLAY=IP:0.0
IP is the IP address of your client machine.
then issue
./DBCA, it should work -
If I execute the command:
emca -config dbcontrol db -repos create
the following error comes back (after I enter the SID):
UnsatisfiedLinkError exception loading native library: njni11
Exception in thread "main" java.lang.UnsatisfiedLinkError: get
at oracle.net.common.NetGetEnv.get(Native Method)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.getEnvParams(SQLEngine.java:425)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.initialize(SQLEngine.java:244)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.<init>(SQLEngine.java:229)
at oracle.sysman.assistants.util.sqlEngine.SQLPlusEngine.<init>(SQLPlusEngine.java:109)
at oracle.sysman.emcp.util.GeneralUtil.initSQLEngine(GeneralUtil.java:353)
at oracle.sysman.emcp.DatabaseChecks.checkDbAvailabilityImpl(DatabaseChecks.java:106)
at oracle.sysman.emcp.DatabaseChecks.checkDbAvailability(DatabaseChecks.java:148)
at oracle.sysman.emcp.DatabaseChecks.isASMDb(DatabaseChecks.java:720)
at oracle.sysman.emcp.EMConfigAssistant.getParamsWarnsList(EMConfigAssistant.java:1981)
at oracle.sysman.emcp.EMConfigAssistant.getDisplayAndPromptWarnsParms(EMConfigAssistant.java:2636)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1009)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:518)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:467)
Any thoughts?Are you on Linux?
It could be the same issue as dbca?
https://metalink.oracle.com/metalink/plsql/f?p=130:14:3959056658989306518::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,468977.1,1,1,1,helvetica
Which says:
Please ensure that the following RPMs are present:
# elfutils-libelf-0.97-5 *
# elfutils-libelf-devel-0.97-5
# libaio-0.3.105-2 *
# libaio-devel-0.3.105-2 -
Im trying to run dbca on my node2 of the cluster ( this is 10.2 db home running against 11.2 clusterware)
but it comes back with an error ... below is the error from trace file for the dbca
ava.lang.UnsatisfiedLinkError: /u01/app/oracle/product/db02/jdk/jre/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1586)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1503)
at java.lang.Runtime.loadLibrary0(Runtime.java:788)
at java.lang.System.loadLibrary(System.java:834)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(NativeLibLoader.java:38)
at sun.awt.DebugHelper.<clinit>(DebugHelper.java:29)
at java.awt.Component.<clinit>(Component.java:506)
at oracle.sysman.assistants.util.wizard.WizardObject.<init>(WizardObject.java:64)
at oracle.sysman.assistants.dbca.ui.DBCAWizard.<init>(DBCAWizard.java:425)
at oracle.sysman.assistants.dbca.ui.UIHost.<init>(UIHost.java:214)
at oracle.sysman.assistants.dbca.ui.InteractiveHost.<init>(InteractiveHost.java:54)
at oracle.sysman.assistants.dbca.Dbca.getHost(Dbca.java:160)
at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:94)
at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:180)
dbca is working fine on the node1 of the cluster...
os: linux 5.4
any idea on what it could be ?user9198889 wrote:
i know what the issue was, it was caused by missing package
(1/2): libXp-1.0.0-8.1.el5.i386.rpm | 22 kB 00:00
(2/2): libXp-1.0.0-8.1.el5.x86_64.rpm
do I need to delete and readd the node to my cluster ? ( in another work reinstaling the oraclehome? ) or that relinking will do ?I think only relinking will work if you didn't get error during installation.
And if you had faced some issue during installation also then I would suggest to reinstall.
Regards
Rajesh -
OS X issue with 10g, dbca won't run due to classChangeError
I am trying to install oracle 10g on my powerbook G4 (1gb) and I keep getting the same problem with the database creation assistant (dbca). I am running OS X 10.3.6 and xCode 1.5. The installation goes fine with no issues but the at the point of launching dbca, I get the following error;
shadow:~ oracle$ dbca
Exception in thread "main" java.lang.IncompatibleClassChangeError
at oracle.sysman.assistants.util.attributes.InitParamAttributes.fillCharacterSets(InitParamAttributes.java:1999)
at oracle.sysman.assistants.util.attributes.InitParamAttributes.<init>(InitParamAttributes.java:446)
at oracle.sysman.assistants.util.step.StepContext.<init>(StepContext.java:239)
at oracle.sysman.assistants.dbca.backend.Host.<init>(Host.java:608)
at oracle.sysman.assistants.dbca.ui.UIHost.<init>(UIHost.java:200)
at oracle.sysman.assistants.dbca.ui.InteractiveHost.<init>(InteractiveHost.java:54)
at oracle.sysman.assistants.dbca.Dbca.getHost(Dbca.java:155)
at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:93)
at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:175)
My environment is
shadow:~ oracle$ env
SHELL=/bin/bash
TERM=vt100
USER=oracle
ORACLE_SID=JCDB
ORACLE_BASE=/Users/jcart/Work/oracle/orahome10g
PATH=/bin:/sbin:/usr/bin:/usr/sbin:/Users/jcart/Work/oracle/orahome10g/bin
PWD=/Users/jcart/Work/oracle
SHLVL=1
HOME=/Users/jcart/Work/oracle
ORACLE_HOME=/Users/jcart/Work/oracle/orahome10g
_=/usr/bin/env
any idea?
Is there a patch somewhere that I have forgotten?
regards
John.Apparently windows 2000 does not meet the minimum requirements for QT7.5, so what you need to do is find out what version of QT7 does if one ever did, if not your probably going to have to install QT6.5, which may be the latest version 2000 can run?
-
DBCA: Issue Creating a cluster database in RAC
Hello Expert,
We encountered some issues while trying to create a cluster database. The issue is:
When running DBCA to create a cluster database, we seem unable to bring up the screen where we can choose "Oracle Real Application Cluster database". It only allows us to create single instance database. We must have missed some steps. Any suggestions?
1. Below are the specs:
* OS: Enterprise Linux Enterprise Linux AS release 4 (October Update 6) 2.6.9 67.0.15.0.1.ELsmp
* Oracle Version: 10.2.0.3 with cluster on 2 nodes (for example: xxx1 and xxx2)
* CRS version: 10.2.0.3
* Running ASM with DATA, REDO, TEMP, FRA diskgroups
* OCR and Voting disk on shared raw devices
2. Results from running crs_stat
$ crs_stat -t
Name Type Target State Host
ora....D1.lsnr application ONLINE ONLINE xxx1
ora....rd1.gsd application ONLINE ONLINE xxx1
ora....rd1.ons application ONLINE ONLINE xxx1
ora....rd1.vip application ONLINE ONLINE xxx1
ora....D2.lsnr application ONLINE ONLINE xxx2
ora....rd2.gsd application ONLINE ONLINE xxx2
ora....rd2.ons application ONLINE ONLINE xxx2
ora....rd2.vip application ONLINE ONLINE xxx2 3. Result from cluster verify on node 1...
$ cluvfy stage -post crsinst -n xxx1
Performing post-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "xxx1".
Checking user equivalence...
User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Daemon status check passed for "CSS daemon".
Cluster manager integrity check passed.
Checking cluster integrity...
Cluster integrity check passed
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
All nodes free of non-clustered, local-only configurations.
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check passed.
Checking CRS integrity...
Checking daemon liveness...
Liveness check passed for "CRS daemon".
Checking daemon liveness...
Liveness check passed for "CSS daemon".
Checking daemon liveness...
Liveness check passed for "EVM daemon".
Checking CRS health...
CRS health check passed.
CRS integrity check passed.
Checking node application existence...
Checking existence of VIP node application (required)
Check passed.
Checking existence of ONS node application (optional)
Check passed.
Checking existence of GSD node application (optional)
Check passed.
Post-check for cluster services setup was successful. 4. Result from cluster verify on node 2
$ cluvfy stage -post crsinst -n xxx2
Performing post-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "xxx2".
Checking user equivalence...
User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Daemon status check passed for "CSS daemon".
Cluster manager integrity check passed.
Checking cluster integrity...
Cluster integrity check passed
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
All nodes free of non-clustered, local-only configurations.
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check passed.
Checking CRS integrity...
Checking daemon liveness...
Liveness check passed for "CRS daemon".
Checking daemon liveness...
Liveness check passed for "CSS daemon".
Checking daemon liveness...
Liveness check passed for "EVM daemon".
Checking CRS health...
CRS health check passed.
CRS integrity check passed.
Checking node application existence...
Checking existence of VIP node application (required)
Check passed.
Checking existence of ONS node application (optional)
Check passed.
Checking existence of GSD node application (optional)
Check passed.
Post-check for cluster services setup was successful. Thanks!
Edited by: user10454776 on Mar 14, 2009 7:40 PM
Edited by: user10454776 on Mar 14, 2009 8:11 PMuser10454776 wrote:
Hello Expert,
We encountered some issues while trying to create a cluster database. The issue is:
When running DBCA to create a cluster database, we seem unable to bring up the screen where we can choose "Oracle Real Application Cluster database". It only allows us to create single instance database. We must have missed some steps. Any suggestions?Hello non-expert.
Until you provide some hints about operating system for each of the RAC machines, the networking you have installed (and whether you have the interconnect running), the shared disk mechanism (and whether it is confirmed shared raw or ASM), the Oracle software versions, whether your systems passed cluster verify ... we would be wasting our time guessing. -
Oracle Config Tools DBCA DBUA NETCA NETMGR -Post your issues here
Hi
This thread is created to collect user experience with Oracle Config tools
DBCA DBUA NETCA NETMGR
You can post your questions,issues and if you come across any bugs you can post here .
This will be taken into consideration and the fix / solution will be given ASAP .
Looking forward for your responses .
Thanks
KanthaHi,
I have a Sun SPARC box . There are 7 instances 2 in 9.2.0.8 and 5 in 10.2.0.1 upgraded earlier than my joining. I want to upgrade one of the 9.2.0.8 databases.
The database to upgarde is up and running and can be connected through listener.
I login as the owner of ora10g and start dbua. It shows me all the 7 databases but when I select the database to upgrade it throws the following info :
[b]The Upgrade Assistant Failed in bringing up the database xxxx. Oracle Home /oracle/9.2.0.8 obtained from /etc/oratab was used to connect to the database. Either the database is not running from Oracle Home /oracle/9.2.0.8 or correct Initialization pfile was not found.
It then asks for pfile. -----------------------------------
The database is up and running.The Oracle home is also correct in Oratab file.
I checked the sqls.log file
It has info like
set heading off
set pagesize 0
set feedback off
set linesize 2048
set sqlprompt 'SQL_ENGINE_END_OF_SQL'
show sqlprompt
set sqlprompt 'SQL>'
set sqlprompt 'SQL>';
set heading off
set pagesize 0
set feedback off
set linesize 2048
set sqlprompt 'SQL_ENGINE_END_OF_SQL'
show sqlprompt
set sqlprompt 'SQL>'
connect /****** as SYSDBA
select count(*) from v$instance;
set heading off
set pagesize 0
set feedback off
set linesize 2048
set sqlprompt 'SQL_ENGINE_END_OF_SQL'
show sqlprompt
set sqlprompt 'SQL>'
Please help on this issue . Y cant the DBUA see that database is up? -
Hi all,
When I was Enter the DBCA for creating new database the following error occur
oracle@linux:~> dbca
DISPLAY not set.
Set DISPLAY environment variable, then re-run.
How to retify the problem
plz
Regards ...The DISPLAY variable needs to be set to the root window of an X server, thus
export DISPLAY=192.168.0.149:0.0.
Are you telnet-ing in from your PeeCee? If so, you need an X server running on you PeeCee -- Like Hummingbird Exceed. If you are telnet-ing in from a unix or linux workstation running X ( like, Motif, for example ), then you need to allow X connection to your workstation. To do this, open a console and issue the command xhost + -
Issue At the time of Creating ASM instance through DBCA For 11g RAC db :
Hi,
I have configured two node RAC with OEL5.
I have installed below software successfully under different home locations.
1) Clusterware :
2) ASM
3) Database
I want to run ASM instance under separate home but when i am executing dbca from ASM home location to create asm i am facing a problem which is not traceable by me. Please help me if any body has any idea on it.
Problem:
Sometime(displayed below) ASM instance is running from node 1 and some times from node 2. At a time ASM in both instance is not in online state. At the end dbca is displaying ORA-01034: ORACLE not available. Please let me know what may be the exact reason for this.
1) State 1
Name Type Target State Host
ora....SM1.asm application ONLINE ONLINE mac1
ora....C1.lsnr application ONLINE ONLINE mac1
ora.mac1.gsd application ONLINE ONLINE mac1
ora.mac1.ons application ONLINE ONLINE mac1
ora.mac1.vip application ONLINE ONLINE mac1
ora....SM2.asm application ONLINE OFFLINE
ora....C2.lsnr application ONLINE ONLINE mac2
ora.mac2.gsd application ONLINE ONLINE mac2
ora.mac2.ons application ONLINE ONLINE mac2
ora.mac2.vip application ONLINE ONLINE mac2
2)Name Type Target State Host
ora....SM1.asm application ONLINE OFFLINE
ora....C1.lsnr application ONLINE ONLINE mac1
ora.mac1.gsd application ONLINE ONLINE mac1
ora.mac1.ons application ONLINE ONLINE mac1
ora.mac1.vip application ONLINE ONLINE mac1
ora....SM2.asm application ONLINE ONLINE mac2
ora....C2.lsnr application ONLINE ONLINE mac2
ora.mac2.gsd application ONLINE ONLINE mac2
ora.mac2.ons application ONLINE ONLINE mac2
ora.mac2.vip application ONLINE ONLINE mac2
With Regards,
SNPYes you are right , I have to make to sure stock budget doesn't get credited.
If you remember in one of my other threads, i wanted to derive commitment item from Matl grp, it was for this purpose. I will derive commitment through matl group at the time of procurement / GR etc and assign a dummy commitment item to stock a/cs. Where as i will derive a consumption commiment item from consumption GLs.
Thank you
Chris -
New Install: dbca problem on ubuntu 10.04
Hello List,
I want to install Oracle 11gR2 on my Ubuntu box which is running 10.04 Lucid:
oracle@z2:~/oh$ cat /etc/issue
Ubuntu 10.04.1 LTS
oracle@z2:~/oh$ uname -a
Linux z2 2.6.32-24-generic #39-Ubuntu SMP Wed Jul 28 06:07:29 UTC 2010 i686 GNU/Linux
The above command suggests to me that I am running 32bit Linux.
I downloaded the 32bit Oracle cdroms.
I read this link:
- http://www.pythian.com/news/13291/installing-oracle-11gr2-enterprise-edition-on-ubuntu-10-04-lucid-lynx/
I carefully followed the instructions there.
The instructions there are for 64 bit Linux. Like I said, my box is 32bit.
Here are the results of my libstdc++5 shoehorn-install:
oracle@z2:/usr/lib$ ll libstd*
lrwxrwxrwx 1 root root 18 2010-08-10 21:59 libstdc++.so.5 -> libstdc++.so.5.0.7
-rw-r--r-- 1 root root 737192 2010-08-10 21:58 libstdc++.so.5.0.7
lrwxrwxrwx 1 root root 19 2010-08-09 13:54 libstdc++.so.6 -> libstdc++.so.6.0.13
-rw-r--r-- 1 root root 975088 2010-03-26 15:43 libstdc++.so.6.0.13
oracle@z2:/usr/lib$
oracle@z2:/usr/lib$
oracle@z2:/usr/lib$ file libstdc++.so.5.0.7
libstdc++.so.5.0.7: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), dynamically linked, stripped
oracle@z2:/usr/lib$
oracle@z2:/usr/lib$ file libstdc++.so.6.0.13
libstdc++.so.6.0.13: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), dynamically linked, stripped
oracle@z2:/usr/lib$
oracle@z2:/usr/lib$
The instructions suggest that I install some debian packages.
Here are my results for that task:
root@z2:/oracle/downloads/database# apt-get install unzip build-essential x11-utils rpm ksh lsb-rpm libaio1
Reading package lists... Done
Building dependency tree
Reading state information... Done
unzip is already the newest version.
build-essential is already the newest version.
x11-utils is already the newest version.
rpm is already the newest version.
ksh is already the newest version.
lsb-rpm is already the newest version.
libaio1 is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
The instructions described a software-only install so I did that.
I bumped into no problems.
After the install,
I added env vars to my .bashrc and got a new bash:
export ORACLE_BASE=/oracle/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/dbhome_1
export ORACLE_SID=orcl
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
export PATH=$ORACLE_HOME/bin:$PATH
Then:
oracle@z2:~$ sqlplus /nolog
SQL*Plus: Release 11.2.0.1.0 Production on Sat Aug 14 18:03:00 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> exit
oracle@z2:~$ ln -s $ORACLE_HOME oh
oracle@z2:~$ ln -s $ORACLE_HOME 11gr2oh
oracle@z2:~$ cd oh
oracle@z2:~/oh$ OPatch/opatch lsinventory
Invoking OPatch 11.1.0.6.6
Oracle Interim Patch Installer version 11.1.0.6.6
Copyright (c) 2009, Oracle Corporation. All rights reserved.
Oracle Home : /oracle/app/oracle/product/11.2.0/dbhome_1
Central Inventory : /oracle/app/oraInventory
from : /etc/oraInst.loc
OPatch version : 11.1.0.6.6
OUI version : 11.2.0.1.0
OUI location : /oracle/app/oracle/product/11.2.0/dbhome_1/oui
Log file location : /oracle/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/opatch2010-08-14_18-06-29PM.log
Patch history file: /oracle/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/opatch_history.txt
Lsinventory Output file location : /oracle/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/lsinv/lsinventory2010-08-14_18-06-29PM.txt
Installed Top-level Products (1):
Oracle Database 11g 11.2.0.1.0
There are 1 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.
OPatch succeeded.
oracle@z2:~/oh$
So far so good.
oracle@z2:~/oh$
oracle@z2:~/oh$ which dbca
/oracle/app/oracle/product/11.2.0/dbhome_1/bin/dbca
Then I tried dbca and it bombed:
oracle@z2:~/oh$
oracle@z2:~/oh$ dbca
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0xb78476f3, pid=5883, tid=3077301952
# Java VM: Java HotSpot(TM) Server VM (1.5.0_17-b02 mixed mode)
# Problematic frame:
# C [ld-linux.so.2+0xd6f3]
# An error report file with more information is saved as hs_err_pid5883.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
Aborted
oracle@z2:~/oh$
oracle@z2:~/oh$
oracle@z2:~/oh$ env|sort
DISPLAY=localhost:10.0
HOME=/oracle
JAVA_HOME=/java/jdk16
LANG=en_US.UTF-8
LD_LIBRARY_PATH=/oracle/app/oracle/product/11.2.0/dbhome_1/lib:/lib:/usr/lib
ORACLE_BASE=/oracle/app/oracle
ORACLE_HOME=/oracle/app/oracle/product/11.2.0/dbhome_1
ORACLE_SID=orcl
PATH=/oracle/app/oracle/product/11.2.0/dbhome_1/bin:/java/jdk16/bin:/pt/jruby151/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/dan/bin:/pt/bin:.
SHELL=/bin/bash
TERM=dumb
USER=oracle
_=/usr/bin/env
oracle@z2:~/oh$
oracle@z2:~/oh$
oracle@z2:~/oh$ unset JAVA_HOME
oracle@z2:~/oh$
oracle@z2:~/oh$ export LD_LIBRARY_PATH=${ORACLE_HOME}/lib
oracle@z2:~/oh$
oracle@z2:~/oh$ export PATH=${ORACLE_HOME}/bin:/usr/bin:/bin:/usr/sbin:/sbin
oracle@z2:~/oh$
oracle@z2:~/oh$ which java
/usr/bin/java
oracle@z2:~/oh$
oracle@z2:~/oh$ java -version
java version "1.6.0_18"
OpenJDK Runtime Environment (IcedTea6 1.8) (6b18-1.8-4ubuntu3)
OpenJDK Server VM (build 16.0-b13, mixed mode)
oracle@z2:~/oh$
oracle@z2:~/oh$
oracle@z2:~/oh$ su
Password:
root@z2:/oracle/oh# mv /usr/bin/java /usr/bin/java16
root@z2:/oracle/oh#
root@z2:/oracle/oh# exit
oracle@z2:~/oh$ which java
oracle@z2:~/oh$
oracle@z2:~/oh$
oracle@z2:~/oh$ dbca
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0xb785a6f3, pid=5953, tid=3077314240
# Java VM: Java HotSpot(TM) Server VM (1.5.0_17-b02 mixed mode)
# Problematic frame:
# C [ld-linux.so.2+0xd6f3]
# An error report file with more information is saved as hs_err_pid5953.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
Aborted
oracle@z2:~/oh$
oracle@z2:~/oh$
I used these google keywords to search for clues:
google:
oracle ubuntu 10.04 dbca SIGSEGV ld-linux.so.2
I found no clues in Google.
So, I look for clues here.
Does anyone have any ideas on how do debug this error from dbca:
oracle@z2:~/oh$ dbca
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0xb785a6f3, pid=5953, tid=3077314240
# Java VM: Java HotSpot(TM) Server VM (1.5.0_17-b02 mixed mode)
# Problematic frame:
# C [ld-linux.so.2+0xd6f3]
??I am running V11.2 on 64-bit Ubuntu
Below are some log files on my system.
You may be able to find similar ones on yours & they might contain additional clues.
/u01/app/oracle/product/11.2.0/dbhome_1/assistants/dbca/logs
/u01/app/oracle/cfgtoollogs/dbca
/u01/app/oracle/cfgtoollogs/dbca/v112
/u01/app/oracle/cfgtoollogs/dbca/v112/mkplug_v3_v112.log
/u01/app/oracle/cfgtoollogs/dbca/v112/tts_example_imp.log
/u01/app/oracle/cfgtoollogs/dbca/v112/postDBCreation.log
/u01/app/oracle/cfgtoollogs/dbca/v112/rmanRestoreDatafiles.sql
/u01/app/oracle/cfgtoollogs/dbca/v112/trace.log
/u01/app/oracle/cfgtoollogs/dbca/v112/postScripts.log
/u01/app/oracle/cfgtoollogs/dbca/v112/OraDb11g_home1_v112_creation_checkpoint.xml
/u01/app/oracle/cfgtoollogs/dbca/v112/cloneDBCreation.log
/u01/app/oracle/cfgtoollogs/dbca/v112/CloneRmanRestore.log
/u01/app/oracle/cfgtoollogs/dbca/v112/lockAccount.log
/u01/app/oracle/cfgtoollogs/dbca/v112/emConfig.log
/u01/app/oracle/cfgtoollogs/dbca/trace.log_OraDb11g_home1
bcm@bcm-laptop:~$ uname -a
Linux bcm-laptop 2.6.32-24-generic #39-Ubuntu SMP Wed Jul 28 05:14:15 UTC 2010 x86_64 GNU/Linux
Maybe you are looking for
-
Exchange rate error in Material Master Upload (MB1C - 561)
Hi. While uploading material through MB1C with movement type 561, I am getting following error My company code currency, material master currency is EUR but still following error is occuring. "Enter rate EUR / rate type M for 01.10.2010 in the system
-
Material document not created for scrap
Hi all, I am doing confirmation and goods movement through Co11. When i enter more yield than planned and some scrap the goods movement are posted ,but there is no material document accounting for the scrap. Also after the final confirmat
-
Problem in accessing two different InitialContexts simultaneously
Hi All I have a strange problem the scenario is as below I have two different web logic servers as server1 and server2 The Realm on server1 is user1 and password is pwd1 The Realm on server1 is user2 and password is pwd2 In my application on server1
-
Dynamic table in Offline interactive form
Hi Experts, I want to add dynamic table (for Purchase Order line items). Number of rows in table will depend on item in purchase order. So, table rows should be added and data can be entered in table rows. Can anyone give me the st
-
SInce the last update none of the artwork in iTunes, even in the iTunes store, is displayed just empty grey boxes, anybody else have this problem?