Exchange rate error in Material Master Upload (MB1C - 561)

Hi.
While uploading material through MB1C with movement type 561, I am getting following error
My company code currency, material master currency is EUR but still following error is occuring.
"Enter rate EUR / rate type M for 01.10.2010 in the system settings
Message no. SG105
Diagnosis
For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
Procedure
Add the missing entry in the currency conversion table.
Execute function
You can then continue to process the commercial transaction."
Why system is asking to maintain exchange rate for same currency?
What are the settings that I should maintain? Thanks in advance.
Regards
Anand

Hi,
My material master currency is EUR
Both Stock and Upload GL accounts currency is EUR
Co COde currency is EUR
Where else is the revevant Settings?
Further, I uploaded one material on 25/Oct/2010 well. But when I am trying to upload the same material again on or before or after
25/Oct/2010 system is giving exchage rate error
What could be the remedy?
Regards
Anand

Similar Messages

I have encountered a peculiar problem in MM01 material master upload.

I have encountered a peculiar problem in MM01 material master upload. The
BDC program uploads data using Session method. The problem is when i
process the session in foreground mode the data uploads successfully, but
when i process it in background mode it gives the following errors in the
log.
'Control Framework: Fatal error - GUI cannot be reached'.
'Runtime error RAISE_EXCEPTION has occurred'.
When i debugged the program i found that this error is encountered when
data is being input in 'Purchase Order text' editor of MM01 transaction.
There is no problem with the BDC recording or the program as i could see.
The only problem what i believe is the system is unable to call the text
editor for inputting purchase order text data in background mode.

Hi
Try uploading a BAPI it would be better
http://www.saptechies.com/mm01-upload-using-bapi/
Regards
Shiva

Problem with Material Master upload

Hi All,
I want to know what the file MTVFP( Group Check Availability) filed gonna do in material master upload bapi "BAPI_MATERIAL_SAVEDATA". When i am trying to upload data i am getting the following error "The field MARC-MTVFP/BAPI_MARC-AVAILCHECK is defined as a required field; it does not contain an entry".
Thanks

Hello Ben ,
I am getting the same error , could you please let me know how you got it solved.
Comradely ,
K.Sibi

UOM error in Material master.

Hi
When we log on to Spanish language, we are getting error in material master for Unit of measure, that the unit of measure has not been created in the language ES. But same UOM has configured in EN language and its working fine for material, while in Spanish language it appear as *** with error details,
Could you please suggestu2026
regards
Vanraj

Hi,
Extactly you are right..you got to Logon in Languange ES and create the required UOM in t-code CUNI...
this shuld solve the issue..try and revrt back..
Also,In CUNI on top menu Go to-Translation-UOM here maintain Source lang to Target lan
Reg,
JJ
Edited by: Jagsap on Apr 20, 2010 4:10 PM
Edited by: Jagsap on Apr 20, 2010 4:15 PM

SRKIM: Payment Maturity Account 시 exchange rate 이 없어 error 발생

PURPOSE
Payment Maturity Event Accounting 시의 문제점을 해결한다.
Problem Description
Foreign Currency 로 발생한 Payment Maturity Event 에 대해 Accounting 시도 시 Exchange Rate 정보가 없어 error 가 발생하였다.
Cannot Account for maturity of <Payment document detalis> because the maturity is in a foreign currency and no exchange rate has been prov ided AE Line Accounted Status = CANNOT ACCOUNT FOR THIS EVENT
Workaround
N/A
Solution Description
다음과 같이 관련 정보를 update 후 다시 Accounting 을 시도 해야 한다.
Data fix Scripts:
update ap_checks_all
set MATURITY_EXCHANGE_RATE = &Maturity_Exchange_Rate
where CHECK_ID = &Check_id;
update ap_payment_history_all
set TRX_BASE_AMOUNT = &TRX_BASE_AMOUNT
PMT_TO_BASE_XRATE = &PMT_TO_BASE_XRATE
where payment_history_id = &payment_history_id;
update ap_accounting_events_all
set CANNOT_ACCOUNT_FLAG = NULL
where accounting_event_id = &Maturity_Accounting_Event_Id;
commit;
Reference Documents
Note 302220.1 Cannot Account for Payment Maturity Because The Maturity Is
In a Foreign Currency And No Exchange Rate Has Been Provided

Material master Upload with LSMW

Hi
When I make Material master Upload with LSMW, I could not find any entry in planning file.
Please explain.

Mayuresh,
Not all LSMW transactions properly update Planning file.
You can run transaction MDAB to set up planning file in Background
You can run transaction MDRE to detect and correct Planning file inconsistancies in Background.
It is probably a good idea to run these jobs periodically, say, weekly, in most production environments.
Regards,
DB49

What is the standard program for Material Master upload using LSMW

Dear All
I am trying to use the MM upload using DATMIG_INF4. I want to know what are the different standard projects that are used for Material master upload.

Hi Amol,
You can load the material master using direct input method in LSMW ,details of which are as follows:
Object               0020   Material master
Method               0000
Program name         RMDATIND
Program type         D   Direct input
Please revert back in case of any doubt.
Cheers
VJ

Material Master upload Programe

Hi anybody,
I developed Material master upload programe in ABAP. Material is uploaded. but more than 18 characters materials is upload upto 18 characters last character is "!".
Ex: SET SCREW M12X50MM L - I want upload this material.
But SAP takes automatically like SET SCREW M12X50M! 18 th character is "!" symbol.
how do i resolve this problem. I want upload more than 18 characters.
anybody please tell me this issue.
Tks,
S.Muthu.

what are you talking about material code or material discription
rgds
Rajesh

Different exchange rate on each material issued for order

Hi all,
I have strange situation like this. Controlling area currency is USD and object/company code currency is THB. When i do Good Issue for production order, system use different exchange rate for each material although all of these material are posted on the same posting date for good issue.
Example :
I do Good issue material A and material B for production order 100000 at posting date 01.03.2008. When i look into cost analysis and look for USD currency, i found that exchange rate for material A is 30 THB/USD and exchange rate for material B is 25 THB/USD. FYI i use exchange rate type m. How can this happen?? How can each material have different exchange rate although its transaction at the same posting date??
I'm waiting your advice.. Maximum point will be given.
Best regard,
Yudha

I think its a bit misleading...The requirement is to post an Invoice with a base taxable amount of Exchange Rate A and a tax amount of Exchange Rate B. The Base Currency is JPY and the System Currency is SGD. So the Report S_ALR_87012357 should see the amount in SGD there. The Issue is caused by the different exchange rate on the tax amount submitted by the Vendor Invoice.
Example: Vendor Invoice Amount: 926,413.00 JPY, then we created PO to Invoice with Base Currency JPYalso amounted 926,413.00 JPY. However, in the Vendor Invoice Amount, the Tax Chargeable is 923.00 SGD (based on their exchange rate 65.66 JPY per SGD). But our Exchange Rate (System Rate) is 63.49 JPY per SGD. How can we reflect the Tax Amount as 65.66 JPY but still the correct SGD amount is based on the Vendor Original Invoice Exchange Rate 65.66 and not the System Exchange Rate, 63.49 in the same Invoice Creation (MIRO)?

Help me for material master upload by using Direct Input method

Hi All,
Can any one help me out for developing Material Master Upload program by using Direct Input Method where we are also submitting the report to upload the data in SAP Database.

Thanks in Advance!
Ramkumar.K

Hi Kumar,
Thanks! I am using submit statement in my program as well but its populating all the views like Sales Organization Data, Sales - General / Plant Data, Accounting, and all the other views except the Basic Data View.. Eventhough i have populated the corresponding fields of the same.
I am also using structure BGR00, BMM00, BMMH1 to upload the data
Can you please help me on this..

Regards,
Ramkumar.K

Exchange rate error while Uploading material in MB1C; MovType 561

Hi Experts,
I am trying to upload material in MB1C (movement type 561). When I am saving, system is giving following error.
My company code currency, material master currency is EUR but still following error is occuring.
"Enter rate EUR / rate type M for 01.10.2010 in the system settings
Message no. SG105
Diagnosis
For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
Procedure
Add the missing entry in the currency conversion table.
Execute function
You can then continue to process the commercial transaction."
Do I need to maintain exchange rate inOB08 for EUR to EUR conversion? Or is there any other setting?
Regards
Anand

Hi,
No need to maintain conversion between EUR to EUR.
We'll take one currency as standard for conversions.
In our case for every currency we have to maintain conversion for USD
EUR to USD
USD to EUR
INR to USD
USD to INR
May be you have to maintain like above.
Rgds
Murali. N

Material Master Upload using Bapi getting error "****** not a valid unit of

Hi Gurus,
i am uploading material master using BAPI Material_master_save_data , where the volume and Unit of Volume is Blank, Still i am getting error as "****** not a valid unit of volume ".kindly help me to resolve the issue.Many Thanks In advance.

Jurgen,
I could able to solve the issue for invalid unit Error ....Now i am getting **** unit of measure is not defined , pls check your entry or else i am getting alternate unit of mesure is same as base unit of measure .
I have used below logic for Purchase Order Unit and Base Unit of measure .
      if wa_upload-unmsr EQ wa_upload-ord_uom .
        bapi_mara1-base_uom = wa_upload-unmsr.
        bapi_mara1-po_unit = wa_upload-ord_uom .
      elseif wa_upload-unmsr NE wa_upload-ord_uom.
        wa_upload-ord_uom = wa_upload-alt_uom.
        bapi_mara1-po_unit = wa_upload-ord_uom.
      endif.
Many Thanks for your help.

Material master upload through flat file using the BAPI_MATERIAL_SAVEDATA

Hi Guys,
I need to upload the material master using the BAPI, I need to update the all the views in the material master, Could any one can help please?
I using EXCEL file is input file and suggest me the, excel file format, if could you suggest it would be very help to me.
Thanks,
Gourisankar.

please go through this code
*& Report ZBAPI_MATERIAL_SAVEDATA
*& AUTHOR
*& PURPOSE : THIS REPORT USES BAPI MATERIAL SAVE DATA TO UPDATE AND CREATE
*& THE MATERIAL
REPORT ZBAPI_MATERIAL_SAVEDATA NO STANDARD PAGE HEADING MESSAGE-ID (ZHNC).
TYPES:BEGIN OF TY_MAT,
 MATERIAL(4),
 IND_SECTOR(1),
 MATL_TYPE(4),
 BASIC_VIEW(1),
 SALES_VIEW(1),
 PURCHASE_VIEW(1),
 STORAGE_VIEW(1),
 MATL_GROUP(9),
 BASE_UOM(3),
 BASE_UOM_ISO(3),
 MATL_GROUP1(1),
 BASE_UOM1(1),
 BASE_UOM_ISO1(1),
 PLANT(4),
 DEL_FLAG(1),
 PUR_GROUP(3),
 BASE_QTY(13),
 PLANT2(4),
 DEL_FLAG5(1),
 PUR_GROUP1(1),
 BASE_QTY1(1),
 PLANT3(4),
 STGE_LOC(4),
 MRP_IND(1),
 PLANT4(4),
 STGE_LOC1(4),
 MRP_IND1(1),
 SALES_ORG(4),
 DISTR_CHAN(2),
 DEL_FLAG1(1),
 MIN_ORDER(13),
 SALES_ORG1(4),
 DISTR_CHAN1(2),
 DEL_FLAG2(1),
 MIN_ORDER1(1),
 LANGU(2),
 MATL_DESC(40),
 END OF TY_MAT.
DATA: IT_DATA TYPE TABLE OF TY_MAT,
 WA_DATA LIKE LINE OF IT_DATA.
*decalraing flag
data: v_flag value ''.
*DECLARING WORK AREAs TO BE PASSED TO THE FUNCTION MODULE.
DATA: BAPI_HEAD LIKE BAPIMATHEAD,
 BAPI_CLIENTDATA LIKE BAPI_MARA,
 BAPI_CLIENTDATAX LIKE BAPI_MARAX,
 BAPI_PLANTDATA LIKE BAPI_MARC,
 BAPI_PLANTDATAX LIKE BAPI_MARCX,
 BAPI_STORAGELOCATIONDATA LIKE BAPI_MARD,
 BAPI_STORAGELOCATIONDATAX LIKE BAPI_MARDX,
 BAPI_SALESDATA LIKE BAPI_MVKE,
 BAPI_SALESDATAX LIKE BAPI_MVKEX,
 BAPI_MAKT LIKE BAPI_MAKT,
 BAPI_RETURN LIKE BAPIRET2.
*INTERNAL TABLE TO HOLD THE MATERIAL DESCRIPTION
DATA: BEGIN OF IT_MAKT OCCURS 0.
INCLUDE STRUCTURE BAPI_MAKT.
DATA END OF IT_MAKT.
DATA:BEGIN OF IT_RET OCCURS 0.
INCLUDE STRUCTURE BAPIRET2.
DATA END OF IT_RET.
*INTERNAL TABLE TO HOLD HEADER DATA
DATA: IT_EXCEL TYPE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
*SELECTION-SCREEN ELEMENTS
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER: FNAME TYPE RLGRAP-FILENAME OBLIGATORY DEFAULT 'C:\Documents and Settings\Administrator\Desktop\MATMAS.XLS' .
PARAMETERS: P_BEGCOL TYPE I DEFAULT 1 NO-DISPLAY,
 P_BEGROW TYPE I DEFAULT 1 NO-DISPLAY,
 P_ENDCOL TYPE I DEFAULT 100 NO-DISPLAY,
 P_ENDROW TYPE I DEFAULT 32000 NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK B1.
*DECLARATION OF EXCELAL TABLE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FNAME.
PERFORM F_GET_FILE USING FNAME.
START-OF-SELECTION.
PERFORM F_XLS_ITAB USING FNAME
 CHANGING IT_EXCEL.
PERFORM F_MOVE_DATA.
perform F_GET_DATA.
*& Form F_GET_FILE
 text
 -->P_FNAME text
 <--P_SY_SUBRC text
FORM F_GET_FILE USING P_FNAME LIKE FNAME.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
 PROGRAM_NAME = SYST-REPID
 DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
STATIC = ' '
MASK = ' '
CHANGING
 FILE_NAME = P_FNAME
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE E006(ZHNC).
ENDIF.
ENDFORM. " F_GET_FILE
*& Form F_XLS_ITAB
 text
 -->P_FNAME text
 <--P_IT_EXCEL text
FORM F_XLS_ITAB USING P_FNAME
 CHANGING P_IT_EXCEL.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
 FILENAME = FNAME
 I_BEGIN_COL = P_BEGCOL
 I_BEGIN_ROW = P_BEGROW
 I_END_COL = P_ENDCOL
 I_END_ROW = P_ENDROW
TABLES
 INTERN = IT_EXCEL
EXCEPTIONS
 INCONSISTENT_PARAMETERS = 1
 UPLOAD_OLE = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " F_XLS_ITAB
*& Form F_MOVE_DATA
 text
--> p1 text
<-- p2 text
FORM F_MOVE_DATA .
DATA : LV_INDEX TYPE I.
FIELD-SYMBOLS <FS>.
*--- Sorting the internal table
SORT IT_EXCEL BY ROW COL.
CLEAR IT_EXCEL.
LOOP AT IT_EXCEL.
MOVE IT_EXCEL-COL TO LV_INDEX.
*--- Assigning the each record to an internal table row
ASSIGN COMPONENT LV_INDEX OF STRUCTURE WA_DATA TO <FS>.
*--- Asigning the field value to a field symbol
MOVE IT_EXCEL-VALUE TO <FS>.
AT END OF ROW.
APPEND WA_DATA TO IT_DATA.
CLEAR WA_DATA.
ENDAT.
ENDLOOP.
ENDFORM. " F_MOVE_DATA
*& Form F_GET_DATA
 text
--> p1 text
<-- p2 text
FORM F_GET_DATA .
LOOP AT IT_DATA INTO WA_DATA.
MOVE-CORRESPONDING WA_DATA TO BAPI_HEAD.
BAPI_HEAD-BASIC_VIEW ='X'.
BAPI_HEAD-SALES_VIEW ='X'.
BAPI_HEAD-PURCHASE_VIEW ='X'.
BAPI_HEAD-STORAGE_VIEW ='X'.
MOVE-CORRESPONDING WA_DATA TO BAPI_CLIENTDATA.
BAPI_CLIENTDATAX-MATL_GROUP = 'X'.
BAPI_CLIENTDATAX-BASE_UOM = 'X'.
BAPI_CLIENTDATAX-BASE_UOM_ISO = 'X'.
MOVE-CORRESPONDING WA_DATA TO BAPI_PLANTDATA.
BAPI_PLANTDATAX-PLANT = BAPI_PLANTDATA-PLANT.
BAPI_PLANTDATAX-DEL_FLAG = 'X'.
BAPI_PLANTDATAX-PUR_GROUP = 'X'.
BAPI_PLANTDATAX-BASE_QTY = 'X'.
MOVE-CORRESPONDING WA_DATA TO BAPI_STORAGELOCATIONDATA.
BAPI_STORAGELOCATIONDATA-PLANT = BAPI_PLANTDATA-PLANT.
BAPI_STORAGELOCATIONDATAX-PLANT = BAPI_STORAGELOCATIONDATA-PLANT.
BAPI_STORAGELOCATIONDATAX-STGE_LOC = BAPI_STORAGELOCATIONDATA-STGE_LOC.
BAPI_STORAGELOCATIONDATAX-MRP_IND = 'X'.
MOVE-CORRESPONDING WA_DATA TO BAPI_SALESDATA.
BAPI_SALESDATAX-SALES_ORG = BAPI_SALESDATA-SALES_ORG.
BAPI_SALESDATAX-DISTR_CHAN = BAPI_SALESDATA-DISTR_CHAN.
BAPI_SALESDATAX-DEL_FLAG = BAPI_SALESDATA-DEL_FLAG.
BAPI_SALESDATAX-MIN_ORDER = 'X'.
REFRESH IT_MAKT.
IT_MAKT-LANGU = WA_DATA-LANGU.
IT_MAKT-MATL_DESC = WA_DATA-MATL_DESC.
APPEND IT_MAKT.
CLEAR IT_RET.
REFRESH IT_RET.
PERFORM F_CALL_BAPI.
READ TABLE IT_RET WITH KEY TYPE = 'S'.
IF SY-SUBRC EQ 0.
PERFORM F_BAPI_COMMIT.
WRITE:/ 'MATERIAL CREATED OR UPDATED SUCESSFULLY WITH MATERIAL NO',WA_DATA-MATERIAL.
ELSE.
MESSAGE E000(ZHNC) WITH 'ERROR IN CREATING THE MATERIAL'.
*WRITE: / 'ERROR IN CREATIN MATERIAL',IT_RET-MESSAGE.
*PERFORM F_DOWNLOAD.
ENDIF.
*ENDIF.
ENDLOOP.
ENDFORM. " F_GET_DATA
*& Form F_CALL_BAPI
 text
--> p1 text
<-- p2 text
FORM F_CALL_BAPI .
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
 HEADDATA = BAPI_HEAD
 CLIENTDATA = BAPI_CLIENTDATA
 CLIENTDATAX = BAPI_CLIENTDATAX
 PLANTDATA = BAPI_PLANTDATA
 PLANTDATAX = BAPI_PLANTDATAX
 STORAGELOCATIONDATA = BAPI_STORAGELOCATIONDATA
 STORAGELOCATIONDATAX = BAPI_STORAGELOCATIONDATAX
 SALESDATA = BAPI_SALESDATA
 SALESDATAX = BAPI_SALESDATAX
IMPORTING
 RETURN = IT_RET
TABLES
 MATERIALDESCRIPTION = IT_MAKT
UNITSOFMEASURE =
UNITSOFMEASUREX =
INTERNATIONALARTNOS =
MATERIALLONGTEXT =
TAXCLASSIFICATIONS =
RETURNMESSAGES =
PRTDATA =
PRTDATAX =
EXTENSIONIN =
EXTENSIONINX =
APPEND IT_RET.
ENDFORM. " F_CALL_BAPI
*& Form F_BAPI_COMMIT
 text
--> p1 text
<-- p2 text
FORM F_BAPI_COMMIT .
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT =
IMPORTING
RETURN =
ENDFORM. " F_BAPI_COMMIT

LSMW for material master upload

Hi gurus
i have one problem while uploading material master with LSMW.
I have murged 2 company codes in one so while creating material master system is asking me tax classification data in sales view for 2 country sales org and distrubition channel. I am using sap std LSMW for material master creation.
system is giving me error as " tax classification data not maintained completely".
need your valuable help to solve this problem

Tax classification data is mandatory field in Sales view of MM01.
Check out you mapping for the tax classification fields. usually classification value is 0 OR 1.
You can first test the values in MM01 Sales View with the legacy data you have and this way you will able to find the mandatory fields also and can see the valid values for the fields.
Remember you may have more than one Tax Classification values depending on the country code.
For that you can add those many columns in legacy data file and map them.
Hope it helps.

HERKL (country of origin) not updated during material master upload

Hi all,
I have a problem in material master update, when iam doing material master update.......i have uploaded more than 18000 records,
where few ariund 800 records are not updated with HERKL( Country Of Origin).......
Could you please help on the above query.
Regards
Jagadeeshwar B
Moderator message: subject corrected, please use a more descriptive one next time.
Edited by: Thomas Zloch on Aug 20, 2010 11:36 AM

Have you analyzed what is common to the errors?
is it the countries that are used in this cases?
or is it a certain material type?
do you have any succesfull update with a country that is among the failed ?
Have you tried manually to enter this field in MM02 for such a material?
we can only guess, maybe a typo in the country code, maybe county does not have an Iso code, maybe the field in hidden in create transaction for this material type.....

Exchange rate error in Material Master Upload (MB1C - 561)

Similar Messages

Maybe you are looking for