Issue setting up DisplayLink Monitor
I have follow damn near ever guide I can find, tried to follow instructions I have read from other posts on this forum, but am just having no luck.
Currently, plugging in the monitor gives me a green screen.
I have udfbl installed and running in the kernel:
$ lsmod | grep udlfb
udlfb 17308 0
syscopyarea 3447 1 udlfb
sysfillrect 3747 1 udlfb
sysimgblt 2232 1 udlfb
fb_sys_fops 1371 1 udlfb
usbcore 174164 4 udlfb,uvcvideo,ehci_hcd,usbhid
I have xf86-video-fbdev installed:
$ sudo pacman -S xf86-video-fbdev
warning: xf86-video-fbdev-0.4.3-2 is up to date
So I am not sure what the issue is, I am assuming it is in my xorg config.
Below is my /etc/X11/xorg.conf.d/10-monitor.conf
Section "ServerLayout"
Identifier "DualSreen"
Screen 0 "DisplayLinkScreen" 0 0
Screen 1 "Laptop" LeftOf "DisplayLinkScreen" #Screen1 at the right of Screen0
Option "Xinerama" "on" #To move windows between screens
EndSection
Section "Monitor"
Identifier "LaptopMonitor"
Option "Enable" "true"
EndSection
Section "Device"
Identifier "LaptopDevice"
Driver "nvidia"
Option "/dev/fb0"
EndSection
Section "Screen"
Identifier "Laptop"
Device "LaptopDevice"
Monitor "LaptopMonitor"
DefaultDepth 16
EndSection
Section "Monitor"
Identifier "DisplayLinkMonitor"
Option "Enable" "true"
EndSection
Section "Device"
Identifier "DisplayLinkDevice"
Driver "fbdev"
BusID "USB"
Option "fbdev" "/dev/fb1"
EndSection
Section "Screen"
Identifier "DisplayLinkScreen"
Device "DisplayLinkDevice"
Monitor "DisplayLinkMonitor"
DefaultDepth 16
EndSection
Any help is much appreciated!
Thanks
Let's set a static IP address and external DNS for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Similar Messages
-
How to set up dual monitors with a Mac Mini
The Mac Mini has only one video output port. I very nearly didn't buy a Mac Mini system because I need to work with two monitors. I use the second monitor to display information in Web pages, PDFs, and Word documents while I am working in the main window.
However, I discovered after quite a bit of Googling that it is possible to set up dual monitors using an inexpensive USB video adapter (about $70).
So I bought my Mini (1.83Ghz, 2GB RAM, 200GB 7200rpm Seagate Momentus), and I also bought a USB video adapter called the EVGA Plus.
I've installed this system and used it now for a week, and I am quite pleased with it. So I thought I'd pass this information along to anyone who's interested. Please note that, although this is my first post to this forum, this isn't spam -- I have no financial relationship with any of the companies mentioned here, other than as a customer.
LINKS
EVGA Plus:
http://www.evga.com/articles/409.asp
Their literature does not mention Mac OS X compatibility. However, the underlying technology is made by Display Link. You can download beta Mac OS X drivers from their site:
Go to Display Link to download the beta Mac OS support -- see
http://www.displaylink.com/macbetadrivers.html
The disk image includes a very well written PDF document that explains the driver's status and limitations.
PICS
My Mac Mini setup, with dual monitors:
http://lh5.ggpht.com/BPfaffenberger/SGV5A7lA2QI/AAAAAAAABMI/CBuR4m3uGRA/IMG_0144 .JPG?imgmax=800
The EVGA+ USB display unit - a tiny little thing - driven by Mac OS beta drivers from Display Link:
http://lh3.ggpht.com/BPfaffenberger/SGV49qpHuQI/AAAAAAAABME/b9wo9TZPJdE/IMG_0143 .JPG?imgmax=800
*MORE INFO*
A thread at 123macmini.com on the same topic, including another user's experiences and MUCH better pictures:
http://www.123macmini.com/forums/viewtopic.php?t=19126&postdays=0&postorder=asc& start=0&sid=5a05cb75b90cab5bbc7dfd16b02632c1
NOTES
* The DisplayLink driver is beta. It doesn't support 2D or 3D accelerated graphics. You can't use it to display iPhoto slide shows, for example. However, I need to be able to display a Web page, document, or PDF in the second monitor while I am working in the first. I've found this solution to be quite acceptable for this purpose.
* Several other companies make USB video units that use the same DisplayLink support, so they should work, too. However, they are more expensive -- largely because they're set up to function as port expanders, I believe. The EVGA Plus was the only unit priced under $100 when I did my search.
* USB does not have very much bandwidth, so you might be surprised that to hear that it's possible to use USB to drive a monitor! You'll find that the display isn't as fast as DVI, but for my purposes, I've found it quite acceptable.
* The EVGA Plus comes with a terrible USB to mini USB cable that will cause all sorts of display problems. Replace it with the type of cable that is used to hook up digital cameras to a USB port.
* Once everything is installed, you can use the Displays in System Preferences (or just click the icon on the menu bar) to adjust the second monitor. You can choose display resolutions (depending on your monitor's ability, of course). Rotation works. You can also right-click the second monitor and choose a different background color or graphic.
Don't expect miracles. Don't go this route if you want to run videos or games in the second monitor. And if you get an EVGA Plus, replace that horrible cable!
I hope this information is helpful.
BryanThere has been quite a lot of discussion here about driving twin displays with the mini, and more recently about the potential for USB video adapters to facilitate this, particularly in the light of several vendors claiming they have suitable MacOS devices and drivers 'almost ready'.
The DisplayLink solution seems to be the one most suggested as viable, though it's a pity they have not yet been able to move their drivers from beta - I suspect that puts a few people off. It's therefore good to hear of a real-world experience that should help others decide whether or not to go this route! -
Problems setting up dual monitors
I am having problems setting up dual monitors on a band new HP envy 700 using windows 8. I just bought this computer and bought DVI to via adapters to use. Everything is hooked up but nothing is happening on the 2nd monitor. Help!
Jaimetech3, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Issue setting up eFax on HP Photosmart 7510 e-All-in-One "Problem connecting to internet"
I'm having an issue setting up eFax on my new HP Photosmart 7510 e-All-in-One. I am following the on-screen instructions and receive an error "Problem connecting to internet" when trying to register the account. The ePrint service is working, and I can use the facebook app on the printer so it seems to be connecting to the internet. I am uncertain how to resolve the issue.
Let's set a static IP address and external DNS for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Hello, I have a macbook pro retina-2013.
About Mavericks I could set my 4K monitor via HDMI on 2560x1440.
This I can not get through at Yosemite. Can someone help me there?They really pushed that it would all work great! Has anyone had the same struggle? Are there any step-by-step instructions to get linked up?
Call Verizon's wireless tech support & explain your problem to them. They will provide "step-by-step" instructions over the phone.
Take notes too!
TIP: If you do call & don't want to go through all those darn promps, when you initially call, just don't say anything. The automatic voice will then say, "will connect you to a service rep." -
Hello, I have a Macbook pro retina-2013. About Mavericks I could set my 4K monitor via HDMI on 2560x1440. This I can not set at Yosemite. Can someone help me there?
They really pushed that it would all work great! Has anyone had the same struggle? Are there any step-by-step instructions to get linked up?
Call Verizon's wireless tech support & explain your problem to them. They will provide "step-by-step" instructions over the phone.
Take notes too!
TIP: If you do call & don't want to go through all those darn promps, when you initially call, just don't say anything. The automatic voice will then say, "will connect you to a service rep." -
[SOLVED] Problem configuring DisplayLink monitor (udlfb...)
SOLVED:
It seems that my monitor shows no green screen when it is ready. Instead it shows the last image rendered. In my case it was this color stripes.
Also, I upgraded to kernel 3.2.1-2, and using the include module udlfb and xf86-video-fbdev from the official repositories I made it work.
I'm struggling to configure a Green House DisplayLink monitor to work with a netbook with an eGalaxTouchscreen. It seems I have problems with udlfb and the DisplayLink driver.
Following this artilce in the wiki, I installed udlfb and xf86-video-fbdev-for-displaylink from the AUR.
Loading the module with
# modprobe udlfb fb_defio=1
does not give any problem:
dmesg
[ 509.963703] usbcore: registered new interface driver udlfb
Plugging the monitor after loading the driver gives the following output:
dmesg
[ 637.363419] usb 1-1: new high speed USB device number 6 using ehci_hcd
[ 637.470050] usb 1-1: device descriptor read/64, error -32
[ 637.701889] udlfb: DisplayLink GH-USD16K - serial #USD16K3310398
[ 637.701899] udlfb: vid_17e9&pid_016b&rev_0196 driver's dlfb_data struct at f377b800
[ 637.701905] udlfb: console enable=0
[ 637.701909] udlfb: fb_defio enable=1
[ 637.702124] udlfb: vendor descriptor length:17 data:17 5f 01 0015 05 00 01 03 00 04
[ 637.702132] udlfb: DL chip limited to 1500000 pixel modes
[ 637.702251] udlfb: allocated 4 65024 byte urbs
[ 637.785022] udlfb: 1366x768 valid mode
[ 637.785034] udlfb: Reallocating framebuffer. Addresses will change!
[ 637.788011] udlfb: 1366x768 valid mode
[ 637.788019] udlfb: set_par mode 1366x768
[ 637.793145] udlfb: DisplayLink USB device /dev/fb1 attached. 1366x768 resolution. Using 4104K framebuffer memory
But there is no visible change, the screen remains black. Nevertheless, there is a new entry /dev/fb1 as advertised. I followed the steps of the article but I didn't suceed. As I understand, the green screen assures you that udlfb is properly loaded and that the monitor is ready to use.
It seems that it is sadly not my case. Another strange thing is that if I load udlfb, then unload it and load it back again the monitor diplays green, blue, red and yellow stripes. But not the green screen.
I attach my xorg configuration, just in case.
/etc/X11/xorg.conf.d/10-monitor.conf
# eGalax TouchScreen
Section "Monitor"
Identifier "LVDS1"
EndSection
Section "Device"
Identifier "eGalaxTouchscreen"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "eGalaxScreen"
Device "eGalaxTouchscreen"
Monitor "LVDS1"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1366x768"
EndSubSection
EndSection
# Green House DisplayLink Monitor
Section "Monitor"
Identifier "GreenHouseMonitor"
EndSection
Section "Device"
Identifier "GreenHouseMonitor"
Driver "fbdev"
BusID "USB"
Option "fbdev" "/dev/fb1"
# Option "rotate" "CCW"
EndSection
Section "Screen"
Identifier "GreenHouseScreen"
Device "GreenHouseMonitor"
Monitor "GreenHouseMonitor"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1366x768"
EndSubSection
EndSection
# Dual Monitor configuration
#Section "ServerLayout"
# Identifier "eGalaxAsMainDisplay"
# Screen 0 "eGalaxScreen"
# Screen 1 "GreenHouseScreen" RightOf "eGalaxScreen"
# Option "Xinerama" "on"
#EndSection
Section "ServerLayout"
Identifier "GreenHouseAsMainDisplay"
Screen 0 "GreenHouseScreen"
Screen 1 "eGalaxScreen" RightOf "GreenHouseScreen"
Option "Xinerama" "on"
EndSection
Last edited by gjasso (2012-01-25 13:22:29)I use my DisplayLink monitor with a netbook. The best I can get at the moment is to use the DL monitor as my primary monitor in a []single monitor setup[]. This means that my netbook's monitor is not used at all (although in my case it is not vital, I would like it to work for watching videos or writing LaTeX code in the smaller screen with a big font size and read the preview in the bigger one).
This is the Xorg file I use:
/etc/X11/xorg.conf.d/10-monitor.conf
# DisplayLink Monitor
Section "Device"
Identifier "DisplayLink"
Driver "fbdev"
BusID "USB"
Option "fbdev" "/dev/fb1"
EndSection
Section "Monitor"
Identifier "Secondary Monitor"
EndSection
Section "Screen"
Identifier "External Screen"
Device "DisplayLink"
Monitor "Secondary Monitor"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1366x768"
# Virtual 4096 4096
EndSubSection
EndSection
# eGalax Touchscreen
Section "Device"
Identifier "Integrated Graphics Controller"
Driver "intel"
EndSection
Section "Monitor"
Identifier "Primary Monitor"
EndSection
Section "Screen"
Identifier "Internal Screen"
Device "Integrated Graphics Controller"
Monitor "Primary Monitor"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1366x768"
Virtual 2732 768
EndSubSection
EndSection
# Dual Monitor configuration
Section "ServerLayout"
Identifier "Dual Head Setup"
# Screen "Internal Screen"
# Screen "External Screen" RightOf "Internal Screen"
Screen "External Screen"
# Screen "Internal Screen" LeftOf "External Screen"
# Screen "Internal Screen" LeftOf "External Screen"
# Option "Xinerama" "on"
# Option "Clone" "off"
EndSection
I use xf86-input-fbdev for the DL monitor.
This has one major drawback: I've found no way to make this work dynamically, so I need to move/rename or edit this file whenever I want to change my setup (twice a day in my case). It is not absolutely unbearable but it is an unsatisfactory solution nevertheless.
Also, if I understood correctly, this seems to be a limitation of the current drivers (which include no 3D accel., so no GNOME shell for example). If you find a better way to do it (specially to detect the other monitor dynamically) please let me know.
PS: Sorry for the late response, I was on vacation. -
How do I set up addl monitors?
How do I set up multiple monitors?
Hi wdl1001,
Thanks for visiting Apple Support Communities.
You can connect an external display to the Thunderbolt port (or Mini Displayport, on older models) of your Mac. This article has some information to help you identify the display port on your Mac:
Mac Basics: Ports and connectors
http://support.apple.com/kb/HT2494
You may need to use an adapter to connect your display to your Mac. This article has more information about Apple video adapters:
About Apple video adapters and cables
http://support.apple.com/kb/HT3235
Once your display is connected to your Mac, you can configure it using the Displays section of System Preferences. See this article for more information:
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
Best Regards,
Jeremy -
Xrandr, dual monitor, openbox - setting the main monitor?
Hello fellow archers,
got some kind of nasty problem here:
I got a notebook (on the right side) and a old monitor (on the left side).
By using the handy xrandr tool I can set up dual monitors (almost) fine:
xrandr --output VGA-0 --mode 1400x1050 --left-of LVDS
That should do the trick, but unfortunatle conky and gmrun than appear on the left-monitor. But I would like to have my notebook screen as the main-screen.
So basically I would like to have what I get with
xrandr --output VGA-0 --mode 1400x1050 --right-of LVDS
just with the minor difference that I can swap screens when I move my mouse over the left-notebook-edge / right-monitor-edge instead of the other way round.
Hope you get what I mean and maybe someone even knows a solution.err. there has to be a more elegant solution! openbox has excellent support for dualheading now.
the xrandr thingie togehter with kde works like this afaicr:
xrandr --output 1 --right-of 2
leads to :
[ screen 2 ] [screen 1 (main)]
maybe this works with openbox just as well
cheers Barde
EDIT: i'm an idiot ^^ there is an option in the openbox configuration file... it's called placement and it's under
<?xml version="1.0" encoding="UTF-8"?>
<openbox_config xmlns="http://openbox.org/3.4/rc">
</snip>
<placement>
<policy>Smart</policy>
<!-- 'Smart' or 'UnderMouse' -->
<center>yes</center>
<!-- whether to place windows in the center of the free area found or
the top left corner -->
<monitor>Any</monitor>
<!-- with Smart placement on a multi-monitor system, try to place new windows
on: 'Any' - any monitor, 'Mouse' - where the mouse is, 'Active' - where
the active window is -->
</placement>
</snip>
</openbox_config>
Last edited by Heller_Barde (2008-10-24 06:58:52) -
Problem setting up dual monitors
I'm having trouble setting up dual monitors.When i boot into my login screen,both monitors turn on for a second or two and then they both shut off and I'm taken to the command line.Here is my 10-monitor.conf file:
-- MOD EDIT -- Use code tags --Inxsible
Section "ServerLayout"
Identifier "DualSreen"
Screen 0 "Screen0"
Screen 1 "Screen1" RightOf "Screen0" #Screen1 at the right of Screen0
Option "Xinerama" "1" #To move windows between screens
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "Enable" "true"
EndSection
Section "Monitor"
Identifier "Monitor1"
Option "Enable" "true"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
SubSection "Display"
Depth 24
Modes "1920x1080__60.00"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
SubSection "Display"
Depth 24
Modes "1270x720_60.00"
EndSubSection
EndSection
Last edited by unilx (2011-01-17 01:26:49)If they both turn on for a second or two and then it drops you back at the command line, it would appear that X is working ok.
What wm/de are you using? .... or maybe what login manager are you using?
Have you checked your /var/log/Xorg.0.log file to see what it says?
Normally when you are dropped to the command line, there would be an error message on the screen in front of you; it should be the same as in the log file, btw.
Also, when did this start happening?
Has it ever worked? If so, what changed? -
PLEASE HELP-looks like bluetooth set up to monitor me in home and w/ iphone
I am hoping I am wrong... first time to post and in need of feedback on what this is. Hoping it just sounds bad but has innocent explanation (here are a couple of the files I have weeded out as looking like most imp):
com.apple.ImageCaptureNotifications.DiscoveryDatabase
SQLite format 3 @ ˚ ˚ ^ ï Á 7™¶ Å
99 Å/tableSourceFile_IOUSBDeviceSourceFile_IOUSBDevice CREATE TABLE SourceFile_IOUSBDevice (sourceFileID integer, ioUSBDeviceID integer)ÅL // ÇGtableIOBluetoothDeviceIOBluetoothDevice
CREATE TABLE IOBluetoothDevice (ID integer primary key not null, typeID integer, DeviceClassMajor integer, DeviceClassMinor integer, SDPServiceClass integer)Å^ ?? ÇKtableIOSCSIPeripheralDeviceNubIOSCSIPeripheralDeviceNub CREATE TABLE IOSCSIPeripheralDeviceNub (ID integer primary key not null, typeID integer, ProductIdentification varchar(256), VendorIdentification varchar(256))Å+ // Ç tableIOFireWireAVCUnitIOFireWireAVCUnit CREATE TABLE IOFireWireAVCUnit (ID integer primary key not null, typeID integer, Unit_Spec_ID integer, AVCSubUnit_b integer)ÅF // Ç;tableIOFireWireSBP2LUNIOFireWireSBP2LUN CREATE TABLE IOFireWireSBP2LUN (ID integer primary key not null, typeID integer, Command_Set integer, Command_Set_Spec_ID integer, Device_Type integer)Å% )) Ç tableIOFireWireUnitIOFireWireUnit CREATE TABLE IOFireWireUnit (ID integer primary key not null, typeID integer, Unit_Spec_ID integer, Unit_SW_Version integer)ÅG )) ÇItableIOUSBInterfaceIOUSBInterface CREATE TABLE IOUSBInterface (ID integer primary key not null, typeID integer, bInterfaceClass integer, bInterfaceSubClass integer, bInterfaceProtocol integer)Å ## ÅktableIOUSBDeviceIOUSBDevice CREATE TABLE IOUSBDevice (ID integer primary key not null, typeID integer, idVendor integer, idProduct integer)Ç !! Ñ tableSourceFileSourceFile CREATE TABLE SourceFile (ID integer primary key not null, typeID integer, bundleID varchar(256), bundleVersion integer, bundlePath varchar(256), deviceDiscoveryPath varchar(256), deviceDiscoveryModDate varchar(20), readDate varchar(20), isTWAINDS integer)v Å;tableDBVersionDBVersion CREATE TABLE DBVersion (ID integer primary key not null, typeID integer, value int
ı ı dbvr ˆ ˚ ˆ ; H UbÅp 7 wÅO?? srcfcom.apple.Type6CameraÍ`/System/Library/Image Capture/Devices/Type6Camera.app/System/Library/Image Capture/Devices/Type6Camera.app/Contents/Resources/DeviceMatchingInfo.plist2009 -07-16 02:40:05 -05002011-06-26 14:24:27 -0500Åp 7 wÅO?? srcfcom.apple.Type5CameraÍ`/System/Library/Image Capture/Devices/Type5Camera.app/System/Library/Image Capture/Devices/Type5Camera.app/Contents/Resources/DeviceMatchingInfo.plist2009 -07-16 02:39:58 -05002011-06-26 14:24:27 -0500Åp 7 wÅO?? srcfcom.apple.Type4CameraÍa/System/Library/Image Capture/Devices/Type4Camera.app/System/Library/Image Capture/Devices/Type4Camera.app/Contents/Resources/DeviceMatchingInfo.plist2009 -07-16 02:39:51 -05002011-06-26 14:24:27 -0500Åp 7 wÅO?? srcfcom.apple.Type3CameraÍ`/System/Library/Image Capture/Devices/Type3Camera.app/System/Library/Image Capture/Devices/Type3Camera.app/Contents/Resources/DeviceMatchingInfo.plist2009 -07-16 02:39:44 -05002011-06-26 14:24:27 -0500Åp 7 wÅO?? srcfcom.apple.Type2CameraÍ`/System/Library/Image Capture/Devices/Type2Camera.app/System/Library/Image Capture/Devices/Type2Camera.app/Contents/Resources/DeviceMatchingInfo.plist2009 -07-16 02:39:38 -05002011-06-26 14:24:27 -0500Åp 7 wÅO?? srcfcom.apple.Type1CameraÍ`/System/Library/Image Capture/Devices/Type1Camera.app/System/Library/Image Capture/Devices/Type1Camera.app/Contents/Resources/DeviceMatchingInfo.plist2009 -07-16 02:39:32 -05002011-06-26 14:24:27 -0500Åj 3 sÅK?? srcfcom.apple.PTPCameraÍe/System/Library/Image Capture/Devices/PTPCamera.app/System/Library/Image Capture/Devices/PTPCamera.app/Contents/Resources/DeviceMatchingInfo.plist2009-0 7-16 02:39:20 -05002011-06-26 14:24:27 -0500Å| ? ÅW?? srcfcom.apple.BluetoothCameraÍa/System/Library/Image Capture/Devices/BluetoothCamera.app/System/Library/Image Capture/Devices/BluetoothCamera.app/Contents/Resources/DeviceMatchingInfo.plist 2009-07-16 02:39:06 -05002011-06-26 14:24 È ˚ ı Ô È ñ á x i Z K < - Ò ‚ ” ƒ µ ¶ ó à y j [ L = . Ú „ ‘ ≈ ∂ ß ò â z k \ M > / Û ‰ ’ ∆ ∑ ® ô ä { l ] N ? 0 ! Ù Â ÷ « ∏ © ö ã | m ^ O @ 1 " ı Ê ◊ » π ™ õ å } n _ P A 2 # ˆ Á ÿ … ∫ ´ ú ç ~ o ` Q B 3 $
w usbd ˘ ø
N usbd ˘ Å
usbd ∞
(DELETED A BUNCH... it goes on forever)
usbd
com.apple.ipod.txt (08012011): the numbers at bottom are my iPhone serial and MEID #s
bplist00“ WDevices_ conn:128:Last Connect— _ CE30CBDA7E8714DB⁄
]Serial NumberYConnected_ Firmware Version StringTMEIDYUse CountYFamily ID\Device Class_ Firmware Version_ Updater Family IDRID\C37F744JDDP73A≥Ë– ¨ HU4.2.8^A100001AD6186D W ' ViPhone ' D ^ Ã
-0CXfpäèô£∞√◊⁄Áˆ
com.apple.bluetooth.txt
-A:eZPANDevices_ BluetoothAutoSeekHIDDevices_ ControllerPowerState[DeviceCache_ PersistentPorts_ PersistentPortsServices_ BluetoothVersionNumber]PairedDevices°
_ 00-23-12-4a-ad-1c — _ 00-23-12-4a-ad-1cfl !"#$%&'()$*+,_ LastServicesUpdate]ClassOfDeviceTName_ ModelIdentifier]LMPSubversion^PageScanPeriod^LastNameUpdateXServices_ PageScanRepetitionMode_ LastInquiryUpdateZLMPVersion\PageScanMode[ClockOffsetWEIRData\Manufacturer3A≥∫` Ëëµ˙ : o Igor Evan Matwijiw s MacBook [MacBook5,2 !¥ 3A≥∫`› ABO √ streamtypedÅË Ñ @ÑÑÑ NSArrayÑÑ NSObjectÖÑ i íÑÑÑ IOBluetoothSDPServiceRecordîíÑÑÑ IOBluetoothDeviceÑÑ IOBluetoothObjectîíÑÑÑ NSDataîï Ñ [6c]# J≠ ÜÜíÑÑÑ NSDictionaryîï íÑÑÑ NSNumberÑÑ NSValueîÑ *ÑïïÜíÑÑÑ IOBluetoothSDPDataElementîÑ C † Ñ L íÑüûÑÑ q¢Ç ÜÜíÑüû°ï ÜíÑ£† † ° íÑÑÑ NSMutableArrayìï íÑ£† † ° íÑ©ï íÑ£† † ° íÑÑÑ IOBluetoothSDPUUIDõíÑõï Ñ [2c] ÜÜÜíÑ£† † ° íÑüû°ïÅ ÜÜÜÜÜÜíÑüû°ï ÜíÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜíÑüû°ï ÜíÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜíÑüû°ïÅ ÜíÑ£† † ° íÑõï Ñ [18c]OBEX File TransferÜÜíÑüû°ï ÜíÑ£† † ° íÑ©ï íÑ£† † ° íÑüû°ïÅneÜÜíÑ£† † ° íÑüû°ïjÜÜíÑ£† † ° íÑüû°ïÅ ÜÜÜÜíÑüû°ïÅ ÜíÑ£† † ° íÑ©ï íÑ£† †° íÑüûÑÑ sßÅˇÜÜÜÜíÑüû°ïÅw ÜíÑ£† † ° íÑÆíÑõï Ñ [16c]omòÚ<: ÷ïj ìSËXÜÜÜíÑüû°ï ÜíÑ£† † ° íÑ©ï íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜíÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜíÑ£† †° íÑüûœß ÜÜÜÜíÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜÜÜÜÜíÑñíóíÑùï íûíÑ£† † ° íÑüû•¢Ç ÜÜí¶íÑ£† † ° íÑ©ï íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜíÑ£† † ° íÑüû°ïÅ ÜÜÜÜÜÜí≤íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜí∏íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜíÑüû°ïÅ ÜíÑ£† † ° íÑõï Ñ [21c]Headset Audio GatewayÜÜí¡íÑ£† † ° íÑ©ï íÑ£† † ° íÑüû°ïÅneÜÜíÑ£† † ° íÑüû°ïjÜÜíÑ£† † ° íÑüû°ïÅ ÜÜÜÜí‘íÑ£† † ° íÑ©ï íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜíÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜíÑ£† †° í∏ÜÜÜÜÜÜÜíÑñíóíÑùï íûíÑ£† † ° íÑüû•¢Ç ÜÜí¶íÑ£† † ° íÑ©ï íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜíÑ£† † ° íÑüû°ïÅ ÜÜÜÜÜÜí≤íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜí∏íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜíÑüû°ïÅ ÜíÑ£† † ° íÑõï Ñ [28c]Group Ad-hoc Network ServiceÜÜí¡íÑ£† † ° íÑ©ï íÑ£† † ° íÑüû°ïÅneÜÜíÑ£† † ° íÑüû°ïjÜÜíÑ£† † ° íÑüû°ïÅ ÜÜÜÜíÑüû°ïÅ ÜíÑ£† † °%íÑõï%Ñ [37c]Personal Group Ad-hoc Network ServiceÜÜíÑüû°ïÅ
ÜíÑ£† † ° í∏ÜíÑüû°ïÅ ÜíÑ£† † ° í≤ÜíÑüû°ï ÜíÑ£† †° íÑüûœßÅˇÜÜí‘íÑ£† † ° íÑ©ï íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜíÑ£† † ° íÑüû°ï ÜÜÜÜíÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜíÑ£† † ° íÑüû°ïÅ ÜÜíÑ£† † ° íÑ©ï íÑ£† † ° íÑüû°ïÅ ÜÜíÑ£† † ° íÑüû°ïÅ ÜÜíÑ£† † ° íÑüû°ïÇ›ÜÜÜíÑ£† † ° íÑüû°ïÇ àÜÜÜÜÜÜÜÜÜÜíÑñíóíÑùï íûíÑ£† † ° íÑüû•¢Ç ÜÜí¶íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜíÑ£† † ° íÑ©ï íÑ£† † ° íÑüû°ïÅ ÜÜÜÜÜÜí≤íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜí∏íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜíÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜíÑüû°ïÅ ÜíÑ£† † ° íÑõï Ñ [24c]Hands-Free Audio GatewayÜÜí¡íÑ£† † ° íÑ©ï íÑ£† † ° íÑüû°ïÅneÜÜíÑ£† † ° íÑüû°ïjÜÜíÑ£† † ° íÑüû°ïÅ ÜÜÜÜíÑüû°ïÅ ÜíÑ£† † ° íÑ©ï íÑ£† †° íûÜÜÜíÑüû°ïÅ ÜíÑ£† † ° íûÜí‘íÑ£† † ° íÑ©ï íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜíÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜíÑ£† †° íÑüû°ï ÜÜÜÜÜÜÜÜíÑñíóíÑùï íûíÑ£† † ° íÑüû•¢Ç ÜÜíÑüû°ïÅ ÜíÑ£† † ° íÑõï Ñ [26c]Apple Macintosh AttributesÜÜíÑüû°ïÅÄ ÜíÑ£† † ° íÑÆíÑõï ®r. ãNêå¬ FıÚÔ‚ÜÜÜíÑüû°ïÅÑ ÜíÑ£† † ° íÑõï Ñ [7c]2.4.0f1ÜÜíÑüû°ïÅÅ ÜíÑ£† † ° íÑõï ÆMacBookÜÜíÑüû°ïÅÖ ÜíÑ£† † ° íÑüû°ï ÜÜíÑüû°ïÅÜ ÜíÑ£† † ° íÑÆíÑõï • 4ÜÜÜíÑüû°ïÅÇ ÜíÑ£† † °
íÑõï
Ñ [10c]MacBook5,2ÜÜíÑüû°ïÅÉ ÜíÑ£† † ° í∏ÜÜÜíÑñíóíÑùï íûíÑ£† † ° íÑüû•¢Ç ÜÜíÑüû°ïÅ ÜíÑ£† † ° íÑüû•¢Ç¿Œ ÜÜíÑüû°ïÅ
ÜíÑ£† † ° í∏Üí¶íÑ£† † ° íÑ©ï íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜíÑ£† † ° íÑüû°ïÅ ÜÜÜÜÜÜí≤íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜíÑüû°ïÅ ÜíÑ£† † ° íÑõï ™Network Access Point ServiceÜÜí∏íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜíÑüû°ïÅ ÜíÑ£† † ° í≤Üí@íÑ£† †° íÑüûœßÅˇÜÜí¡íÑ£† † ° íÑ©ï íÑ£† † ° íÑüû°ïÅneÜÜíÑ£† † ° íÑüû°ïjÜÜíÑ£† † ° íÑüû°ïÅ ÜÜÜÜí‘íÑ£† † ° íÑ©ï íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜíÑ£† † ° íÑüû°ï ÜÜÜÜíÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜíÑ£† † ° íÑüû°ïÅ ÜÜíÑ£† † ° íÑ©ï íÑ£† † ° íÑüû°ïÅ ÜÜíÑ£† † ° íÑüû°ïÅ ÜÜíÑ£† † ° íÑüû°ïÇ›ÜÜÜíÑ£† † ° íÑüû°ïÇ àÜÜÜÜÜÜÜÜíÑüû°ïÅ ÜíÑ£† † °,íÑõï,Ñ [44c]Personal Ad-hoc Network Service Access PointÜÜÜÜíÑñíóíÑùï íûíÑ£† † ° íÑüû•¢Ç ÜÜí¶íÑ£† † ° íÑ©ï íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜíÑ£† † ° íÑüû°ïÅ ÜÜÜÜÜÜí≤íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜí∏íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜíÑüû°ïÅ ÜíÑ£† † ° íÑõï ¶Bluetooth-PDA-SyncÜÜí¡íÑ£† † ° íÑ©ï íÑ£† † ° íÑüû°ïÅneÜÜíÑ£† † ° íÑüû°ïjÜÜíÑ£† † ° íÑüû°ïÅ ÜÜÜÜí‘íÑ£† † ° íÑ©ï íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜíÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜíÑ£† †° íÅ©ÜÜÜÜÜÜÜíÑñíóíÑùï íûíÑ£† † ° íÑüû•¢Ç ÜÜí¶íÑ£† † ° íÑ©ï íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜíÑ£† † ° íÑüû°ïÅ ÜÜÜÜÜÜí≤íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜí∏íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜíÑüû°ïÅ ÜíÑ£† † ° íÑõï ®OBEX Object PushÜÜí¡íÑ£† † ° íÑ©ï íÑ£† † ° íÑüû°ïÅneÜÜíÑ£† † ° íÑüû°ïjÜÜíÑ£† † ° íÑüû°ïÅ ÜÜÜÜíÑüû°ïÅ ÜíÑ£† † ° íÑ©ï íÑ£† †° íÑüûœßÅˇÜÜÜÜíÑüû°ïÅw ÜíÑ£† † ° íÑÆíÑõï ®omòÚ<: ÷ïj ìSËXÜÜÜí‘íÑ£† † ° íÑ©ï íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜíÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜíÑ£† †° íÑüû°ï
ÜÜÜÜíÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜÜÜÜÜíÑñíóíÑùï íûíÑ£† † ° íÑüû•¢Ç ÜÜí¶íÑ£† † ° íÑ©ï íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜíÑ£† † ° íÑüû°ïÅ ÜÜÜÜÜÜí≤íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜí∏íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜÜÜíÑüû°ïÅ ÜíÑ£† † ° íÑõï Ñ [12c]AVRCP TargetÜÜíÑüû°ïÅ ÜíÑ£† † ° í∏ÜíÑüû°ïÅw ÜíÑ£† † ° íÑÆíÑõï ®omòÚ<: ÷ïj ìSËXÜÜÜí‘íÑ£† † ° íÑ©ï íÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜíÑ£† † ° íÑüû°ï ÜÜÜÜíÑ£† † ° íÑ©ï íÑ£† † ° íÑÆíÑõï • ÜÜÜíÑ£† † ° íÑüû°ïÅ ÜÜÜÜÜÜÜÜÜ 3A≥∫`aHë óO Igor Evan Matwijiw‚Äôs MacBook ˇL MacBook5,2î4 Dl “./0>_ "incoming port - Bluetooth-PDA-Sync_ Bluetooth-ModemŸ123456789.'': $: =VBTName]P49SerialPortZHiddenPort_ BTRFCOMMChannel_ BTAuthenticationRequired_ BTSerialConnectionTypeUBTPSM_ BTEncryptionTypeYBTTTYName _ Bluetooth-PDA-Sync◊12745?9/'$$$@/YBTAddress@—.B◊CDEFGHIJL=U]^`_ 0005 - BrowseGroupList*_ 0004 - ProtocolDescriptorList_ 0100 - ServiceName*_ #0006 - LanguageBaseAttributeIDList*_ 0000 - ServiceRecordHandle*_ 0001 - ServiceClassIDList_ %0009 - BluetoothProfileDescriptorList°KB ¢MO°NB ¢PQB ”RST':'_ DataElementType_ DataElementValue_ DataElementSize£VY[”RST'WX en ”RST'ZX j”RST'\X °_B °a¢bcB ”RST'dX °f_ 00-23-12-4a-ad-1c $BYewë™∏∫Œœ–”Á + 0 B P _ n w ê § Ø º » – › Ê Î ( 4 7 9 B 8 J ] d r } è ™ √ … ‹ Ê Ë È Í ˇ + E e { ° ø €
/ B T X _ b d k m t w | ~ Å É Ü â ê ì ï g ©Welcome to the discussions.
So what make you think, to quote you "bluetooth set up to monitor me in home and w/ iphone" ? That stuff looks like a bunch of data files, some sqllite, some plist, and some possibly binary. There's lots of this kind of stuff floating around your system.
You are not being monitored. And if you were bluetooth is about the last mode to even try to use due to its limited range. In addition your post says you are using a mac pro and the bluetooth on mac pros leaves a lot to be desired to say the least (I'm being kind using those words). The built-in BT on mac pros is lucky to reach the mouse on your desk! -
i need help with a second hand iphone i purchased recently,i am having issues setting it up as it has is requesting for the icloud account that was used by the previous user
Sorry.
The iPhone is of no use until/unless the previous owner removes it from their account.
You will need to find the prior owner or return the iPhone. -
Having issue setting up email account on the iphone.
having issue setting up email account on the iphone. Going into settings mail, contacts, calendars...it goes back to the welcome screen. How do I delete all email accounts and set up from scratch?
I was having the exact same issue. It was driving me crazy. Just as a fluke, I tried logging in to my wife's account on the verizon.net website to se if I had a bad password or something. As soon as I logged in on my computer, her account verified & installed on her iphone. I have no idea why, but it worked.
-
Issues setting negative current on a KEPCO BOP 36-12D
First thanks in advance for any adivce on this. I'm pretty new to labview. I am trying to set a current remotely on a Kepco BOP 36-12. Manually the power supply works fine, and I have no issues setting a positive current, but the issue comes in setting a negative current. When I switch the voltage set point to negative I can set a current down to -5 amps, anything lower than -5 amps hits the voltage limit for a reason that I can't figure out. Thank you again!
Attachments:
kepco alone2.vi 15 KBI have not worked with the Kepco BOP since the mid 90's, but we must have had 10 or so test set each with 6 BOP to create 3 phase current and voltage.
As I recall they are nothing more than a power amplier and will follow the signal you supply within its limit. +/- its rails.
We did not control them directly with LabVIEW. We controled them via standard function generators with LabVIEW.
Is you problem with the setup of the BOP or is it with the device between the LabVIEW and the BOP.
Can't tell what the missing subVI are doing from the VI you posted.
Omar -
Issues with using 3 monitors on 2 external gpu
Hi,
I have some issues with configuring Xorg to use 3 monitors. I have 2 external graphic cards (same model, no SLI). Monitors connected to the first gpu are recognized ok but I can't configure my 3rd monitor conencted to the second gpu via HDMI nor DVI.
1st is recognized as DVI-I-1, 2nd is DP-1 in first card, 3rd monitor is in second card (bus 22:00.0) as DP-1-2 (also tried connecting as DVI-I-2). I can see them in Xorg log but I can't configure my 3rd monitor via kscreen nor xrandr. :-/
lspci |grep VGA:
03:00.0 VGA compatible controller: NVIDIA Corporation GF108GL [Quadro 600] (rev a1)
22:00.0 VGA compatible controller: NVIDIA Corporation GF108GL [Quadro 600] (rev a1)
xrandr:
Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192
DVI-I-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 527mm x 297mm
1920x1080 60.0*+
1600x900 60.0
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
DP-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 527mm x 297mm
1920x1080 60.0*+
1600x900 60.0
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
Xorg config (autoconfig enable only 2 monitors, I generated config and tried to edit it with no luck, I noticed there is PCI:34:0:0 generated by Xorg so I also tried to change it to 22:0:0, I also tried to add that option "Monitor-<output>" but same result):
Section "ServerLayout"
Identifier "X.org Configured"
#Screen 0 "Screen0" 0 0
#Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "DELL"
Option "Monitor-DVI-I-1" "DVI-I-1"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "DELL"
Option "Monitor-DP-1" "DP-1"
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "DELL"
Option "Monitor-DP-1-2" "DP-1-2"
EndSection
Section "Device"
Identifier "Card0"
Driver "nouveau"
BusID "PCI:3:0:0"
Option "Monitor-DVI-I-1"
Option "Monitor-DP-1"
EndSection
Section "Device"
Identifier "Card1"
Driver "nouveau"
BusID "PCI:34:0:0"
Option "Monitor-DP-1-2"
EndSection
Xorg log (I can see that monitor at time 1767.316):
[ 1766.959]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 1766.960] X Protocol Version 11, Revision 0
[ 1766.960] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 1766.960] Current Operating System: Linux CZ09DT1XM5002 3.12.5-1-ARCH #1 SMP PREEMPT Thu Dec 12 12:57:31 CET 2013 x86_64
[ 1766.960] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e2c593e5-b0f4-4c74-84fd-5a88db345ca4 rw quiet
[ 1766.961] Build Date: 13 December 2013 03:11:42PM
[ 1766.962]
[ 1766.962] Current version of pixman: 0.32.4
[ 1766.963] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1766.963] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1766.965] (==) Log file: "/var/log/Xorg.1.log", Time: Thu Jan 2 12:43:56 2014
[ 1766.965] (++) Using config file: "/etc/X11/xorg.conf.d/20-multimonitor.conf"
[ 1766.966] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1766.966] (==) ServerLayout "X.org Configured"
[ 1766.966] (==) No screen section available. Using defaults.
[ 1766.966] (**) |-->Screen "Default Screen Section" (0)
[ 1766.966] (**) | |-->Monitor "<default monitor>"
[ 1766.966] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 1766.966] (**) | |-->Device "Card0"
[ 1766.966] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1766.966] (**) |-->Input Device "Mouse0"
[ 1766.966] (**) |-->Input Device "Keyboard0"
[ 1766.966] (==) Automatically adding devices
[ 1766.966] (==) Automatically enabling devices
[ 1766.966] (==) Automatically adding GPU devices
[ 1766.966] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1766.966] Entry deleted from font path.
[ 1766.966] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1766.966] Entry deleted from font path.
[ 1766.966] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1766.966] Entry deleted from font path.
[ 1766.966] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1766.967] Entry deleted from font path.
[ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1766.967] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1766.967] Entry deleted from font path.
[ 1766.967] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1766.967] Entry deleted from font path.
[ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1766.967] Entry deleted from font path.
[ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1766.967] Entry deleted from font path.
[ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1766.967] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 1766.967] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 1766.967] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 1766.967] (WW) Disabling Mouse0
[ 1766.967] (WW) Disabling Keyboard0
[ 1766.967] (II) Loader magic: 0x7fec20
[ 1766.967] (II) Module ABI versions:
[ 1766.967] X.Org ANSI C Emulation: 0.4
[ 1766.967] X.Org Video Driver: 14.1
[ 1766.967] X.Org XInput driver : 19.1
[ 1766.967] X.Org Server Extension : 7.0
[ 1766.967] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1766.967] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 1767.169] (--) PCI:*(0:3:0:0) 10de:0df8:10de:0835 rev 161, Mem @ 0xc6000000/16777216, 0xc8000000/134217728, 0xd0000000/33554432, I/O @ 0x00007000/128, BIOS @ 0x????????/524288
[ 1767.169] (--) PCI: (0:34:0:0) 10de:0df8:10de:0835 rev 161, Mem @ 0xfa000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000f000/128, BIOS @ 0x????????/524288
[ 1767.169] Initializing built-in extension Generic Event Extension
[ 1767.170] Initializing built-in extension SHAPE
[ 1767.170] Initializing built-in extension MIT-SHM
[ 1767.170] Initializing built-in extension XInputExtension
[ 1767.171] Initializing built-in extension XTEST
[ 1767.171] Initializing built-in extension BIG-REQUESTS
[ 1767.172] Initializing built-in extension SYNC
[ 1767.172] Initializing built-in extension XKEYBOARD
[ 1767.172] Initializing built-in extension XC-MISC
[ 1767.173] Initializing built-in extension SECURITY
[ 1767.173] Initializing built-in extension XINERAMA
[ 1767.174] Initializing built-in extension XFIXES
[ 1767.174] Initializing built-in extension RENDER
[ 1767.174] Initializing built-in extension RANDR
[ 1767.175] Initializing built-in extension COMPOSITE
[ 1767.175] Initializing built-in extension DAMAGE
[ 1767.175] Initializing built-in extension MIT-SCREEN-SAVER
[ 1767.176] Initializing built-in extension DOUBLE-BUFFER
[ 1767.176] Initializing built-in extension RECORD
[ 1767.176] Initializing built-in extension DPMS
[ 1767.177] Initializing built-in extension X-Resource
[ 1767.177] Initializing built-in extension XVideo
[ 1767.177] Initializing built-in extension XVideo-MotionCompensation
[ 1767.178] Initializing built-in extension XFree86-VidModeExtension
[ 1767.178] Initializing built-in extension XFree86-DGA
[ 1767.178] Initializing built-in extension XFree86-DRI
[ 1767.179] Initializing built-in extension DRI2
[ 1767.179] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 1767.179] (II) LoadModule: "glx"
[ 1767.179] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1767.179] (II) Module glx: vendor="X.Org Foundation"
[ 1767.179] compiled for 1.14.5, module version = 1.0.0
[ 1767.179] ABI class: X.Org Server Extension, version 7.0
[ 1767.179] (==) AIGLX enabled
[ 1767.180] Loading extension GLX
[ 1767.180] (II) LoadModule: "nouveau"
[ 1767.180] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 1767.180] (II) Module nouveau: vendor="X.Org Foundation"
[ 1767.180] compiled for 1.14.4, module version = 1.0.10
[ 1767.180] Module class: X.Org Video Driver
[ 1767.180] ABI class: X.Org Video Driver, version 14.1
[ 1767.180] (II) NOUVEAU driver
[ 1767.180] (II) NOUVEAU driver for NVIDIA chipset families :
[ 1767.180] RIVA TNT (NV04)
[ 1767.180] RIVA TNT2 (NV05)
[ 1767.180] GeForce 256 (NV10)
[ 1767.180] GeForce 2 (NV11, NV15)
[ 1767.180] GeForce 4MX (NV17, NV18)
[ 1767.180] GeForce 3 (NV20)
[ 1767.180] GeForce 4Ti (NV25, NV28)
[ 1767.180] GeForce FX (NV3x)
[ 1767.180] GeForce 6 (NV4x)
[ 1767.180] GeForce 7 (G7x)
[ 1767.180] GeForce 8 (G8x)
[ 1767.180] GeForce GTX 200 (NVA0)
[ 1767.180] GeForce GTX 400 (NVC0)
[ 1767.180] (--) using VT number 3
[ 1767.182] (II) [drm] nouveau interface version: 1.1.1
[ 1767.183] (II) [drm] nouveau interface version: 1.1.1
[ 1767.183] (II) Loading sub module "dri2"
[ 1767.183] (II) LoadModule: "dri2"
[ 1767.183] (II) Module "dri2" already built-in
[ 1767.183] (--) NOUVEAU(0): Chipset: "NVIDIA NVC1"
[ 1767.183] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1767.183] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 1767.183] (==) NOUVEAU(0): RGB weight 888
[ 1767.183] (==) NOUVEAU(0): Default visual is TrueColor
[ 1767.183] (==) NOUVEAU(0): Using HW cursor
[ 1767.183] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 1767.183] (==) NOUVEAU(0): Page flipping enabled
[ 1767.183] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 1767.222] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 1767.230] (II) NOUVEAU(0): Output DP-1 has no monitor section
[ 1767.265] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 1767.265] (II) NOUVEAU(0): Manufacturer: DEL Model: a09b Serial#: 827608652
[ 1767.265] (II) NOUVEAU(0): Year: 2013 Week: 41
[ 1767.265] (II) NOUVEAU(0): EDID Version: 1.3
[ 1767.265] (II) NOUVEAU(0): Digital Display Input
[ 1767.265] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 1767.265] (II) NOUVEAU(0): Gamma: 2.20
[ 1767.265] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[ 1767.265] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1767.265] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 1767.265] (II) NOUVEAU(0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
[ 1767.265] (II) NOUVEAU(0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 1767.265] (II) NOUVEAU(0): Supported established timings:
[ 1767.265] (II) NOUVEAU(0): 720x400@70Hz
[ 1767.265] (II) NOUVEAU(0): 640x480@60Hz
[ 1767.265] (II) NOUVEAU(0): 640x480@75Hz
[ 1767.265] (II) NOUVEAU(0): 800x600@60Hz
[ 1767.265] (II) NOUVEAU(0): 800x600@75Hz
[ 1767.265] (II) NOUVEAU(0): 1024x768@60Hz
[ 1767.265] (II) NOUVEAU(0): 1024x768@75Hz
[ 1767.265] (II) NOUVEAU(0): 1280x1024@75Hz
[ 1767.265] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 1767.265] (II) NOUVEAU(0): Supported standard timings:
[ 1767.265] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 1767.265] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1767.265] (II) NOUVEAU(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 1767.265] (II) NOUVEAU(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 1767.265] (II) NOUVEAU(0): Supported detailed timing:
[ 1767.265] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 527 x 297 mm
[ 1767.265] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1767.265] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1767.265] (II) NOUVEAU(0): Serial No: 36WJX3A91TNL
[ 1767.265] (II) NOUVEAU(0): Monitor name: DELL P2414H
[ 1767.265] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 1767.265] (II) NOUVEAU(0): EDID (in hex):
[ 1767.265] (II) NOUVEAU(0): 00ffffffffffff0010ac9ba04c4e5431
[ 1767.265] (II) NOUVEAU(0): 2917010380351e78eaa0a5a656529d27
[ 1767.265] (II) NOUVEAU(0): 0f5054a54b00714f8180a9c0d1c00101
[ 1767.265] (II) NOUVEAU(0): 010101010101023a801871382d40582c
[ 1767.265] (II) NOUVEAU(0): 45000f292100001e000000ff00333657
[ 1767.265] (II) NOUVEAU(0): 4a5833413931544e4c0a000000fc0044
[ 1767.265] (II) NOUVEAU(0): 454c4c205032343134480a20000000fd
[ 1767.265] (II) NOUVEAU(0): 00384c1e5311000a20202020202000c2
[ 1767.265] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 1767.265] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 1767.265] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 1767.265] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1767.273] (II) NOUVEAU(0): EDID for output DP-1
[ 1767.273] (II) NOUVEAU(0): Manufacturer: DEL Model: a09a Serial#: 844123724
[ 1767.273] (II) NOUVEAU(0): Year: 2013 Week: 41
[ 1767.273] (II) NOUVEAU(0): EDID Version: 1.4
[ 1767.273] (II) NOUVEAU(0): Digital Display Input
[ 1767.273] (II) NOUVEAU(0): 8 bits per channel
[ 1767.273] (II) NOUVEAU(0): Digital interface is DisplayPort
[ 1767.273] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 1767.273] (II) NOUVEAU(0): Gamma: 2.20
[ 1767.273] (II) NOUVEAU(0): DPMS capabilities: Off
[ 1767.273] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[ 1767.273] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 1767.273] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
[ 1767.273] (II) NOUVEAU(0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
[ 1767.273] (II) NOUVEAU(0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 1767.273] (II) NOUVEAU(0): Supported established timings:
[ 1767.273] (II) NOUVEAU(0): 720x400@70Hz
[ 1767.273] (II) NOUVEAU(0): 640x480@60Hz
[ 1767.273] (II) NOUVEAU(0): 640x480@75Hz
[ 1767.273] (II) NOUVEAU(0): 800x600@60Hz
[ 1767.273] (II) NOUVEAU(0): 800x600@75Hz
[ 1767.273] (II) NOUVEAU(0): 1024x768@60Hz
[ 1767.273] (II) NOUVEAU(0): 1024x768@75Hz
[ 1767.273] (II) NOUVEAU(0): 1280x1024@75Hz
[ 1767.273] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 1767.273] (II) NOUVEAU(0): Supported standard timings:
[ 1767.273] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 1767.273] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1767.273] (II) NOUVEAU(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 1767.273] (II) NOUVEAU(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 1767.273] (II) NOUVEAU(0): Supported detailed timing:
[ 1767.273] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 527 x 297 mm
[ 1767.273] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1767.273] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1767.273] (II) NOUVEAU(0): Serial No: 36WJX3A92PNL
[ 1767.273] (II) NOUVEAU(0): Monitor name: DELL P2414H
[ 1767.273] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 1767.273] (II) NOUVEAU(0): EDID (in hex):
[ 1767.273] (II) NOUVEAU(0): 00ffffffffffff0010ac9aa04c4e5032
[ 1767.273] (II) NOUVEAU(0): 29170104a5351e783aa0a5a656529d27
[ 1767.273] (II) NOUVEAU(0): 0f5054a54b00714f8180a9c0d1c00101
[ 1767.273] (II) NOUVEAU(0): 010101010101023a801871382d40582c
[ 1767.273] (II) NOUVEAU(0): 45000f292100001e000000ff00333657
[ 1767.273] (II) NOUVEAU(0): 4a5833413932504e4c0a000000fc0044
[ 1767.273] (II) NOUVEAU(0): 454c4c205032343134480a20000000fd
[ 1767.273] (II) NOUVEAU(0): 00384c1e5311000a2020202020200053
[ 1767.273] (II) NOUVEAU(0): Printing probed modes for output DP-1
[ 1767.273] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 1767.273] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 1767.273] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1767.273] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 1767.273] (II) NOUVEAU(0): Output DP-1 connected
[ 1767.273] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 1767.273] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
[ 1767.273] (II) NOUVEAU(0): Output DP-1 using initial mode 1920x1080
[ 1767.273] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1767.274] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[ 1767.274] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 1767.274] (**) NOUVEAU(0): Mode "1600x900": 119.0 MHz (scaled from 0.0 MHz), 55.9 kHz, 60.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 1767.274] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1767.274] (==) NOUVEAU(0): DPI set to (96, 96)
[ 1767.274] (II) Loading sub module "fb"
[ 1767.274] (II) LoadModule: "fb"
[ 1767.274] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1767.274] (II) Module fb: vendor="X.Org Foundation"
[ 1767.274] compiled for 1.14.5, module version = 1.0.0
[ 1767.274] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1767.274] (II) Loading sub module "exa"
[ 1767.274] (II) LoadModule: "exa"
[ 1767.274] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 1767.274] (II) Module exa: vendor="X.Org Foundation"
[ 1767.274] compiled for 1.14.5, module version = 2.6.0
[ 1767.274] ABI class: X.Org Video Driver, version 14.1
[ 1767.274] (II) Loading sub module "shadowfb"
[ 1767.274] (II) LoadModule: "shadowfb"
[ 1767.274] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 1767.274] (II) Module shadowfb: vendor="X.Org Foundation"
[ 1767.274] compiled for 1.14.5, module version = 1.0.0
[ 1767.274] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1767.274] (II) Loading sub module "dri2"
[ 1767.274] (II) LoadModule: "dri2"
[ 1767.274] (II) Module "dri2" already built-in
[ 1767.274] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
[ 1767.275] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[ 1767.275] (==) NOUVEAU(G0): RGB weight 888
[ 1767.275] (==) NOUVEAU(G0): Default visual is TrueColor
[ 1767.275] (==) NOUVEAU(G0): Using HW cursor
[ 1767.275] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
[ 1767.275] (==) NOUVEAU(G0): Page flipping enabled
[ 1767.275] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
[ 1767.308] (II) NOUVEAU(G0): Output DVI-I-1-2 has no monitor section
[ 1767.316] (II) NOUVEAU(G0): Output DP-1-2 has no monitor section
[ 1767.339] (II) NOUVEAU(G0): EDID for output DVI-I-1-2
[ 1767.347] (II) NOUVEAU(G0): EDID for output DP-1-2
[ 1767.347] (II) NOUVEAU(G0): Manufacturer: DEL Model: a09a Serial#: 844124236
[ 1767.347] (II) NOUVEAU(G0): Year: 2013 Week: 41
[ 1767.347] (II) NOUVEAU(G0): EDID Version: 1.4
[ 1767.347] (II) NOUVEAU(G0): Digital Display Input
[ 1767.347] (II) NOUVEAU(G0): 8 bits per channel
[ 1767.347] (II) NOUVEAU(G0): Digital interface is DisplayPort
[ 1767.347] (II) NOUVEAU(G0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 1767.347] (II) NOUVEAU(G0): Gamma: 2.20
[ 1767.347] (II) NOUVEAU(G0): DPMS capabilities: Off
[ 1767.347] (II) NOUVEAU(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[ 1767.347] (II) NOUVEAU(G0): First detailed timing is preferred mode
[ 1767.347] (II) NOUVEAU(G0): Preferred mode is native pixel format and refresh rate
[ 1767.347] (II) NOUVEAU(G0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
[ 1767.347] (II) NOUVEAU(G0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 1767.347] (II) NOUVEAU(G0): Supported established timings:
[ 1767.347] (II) NOUVEAU(G0): 720x400@70Hz
[ 1767.347] (II) NOUVEAU(G0): 640x480@60Hz
[ 1767.347] (II) NOUVEAU(G0): 640x480@75Hz
[ 1767.347] (II) NOUVEAU(G0): 800x600@60Hz
[ 1767.347] (II) NOUVEAU(G0): 800x600@75Hz
[ 1767.347] (II) NOUVEAU(G0): 1024x768@60Hz
[ 1767.347] (II) NOUVEAU(G0): 1024x768@75Hz
[ 1767.347] (II) NOUVEAU(G0): 1280x1024@75Hz
[ 1767.348] (II) NOUVEAU(G0): Manufacturer's mask: 0
[ 1767.348] (II) NOUVEAU(G0): Supported standard timings:
[ 1767.348] (II) NOUVEAU(G0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 1767.348] (II) NOUVEAU(G0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1767.348] (II) NOUVEAU(G0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 1767.348] (II) NOUVEAU(G0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 1767.348] (II) NOUVEAU(G0): Supported detailed timing:
[ 1767.348] (II) NOUVEAU(G0): clock: 148.5 MHz Image Size: 527 x 297 mm
[ 1767.348] (II) NOUVEAU(G0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1767.348] (II) NOUVEAU(G0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1767.348] (II) NOUVEAU(G0): Serial No: 36WJX3A92PPL
[ 1767.348] (II) NOUVEAU(G0): Monitor name: DELL P2414H
[ 1767.348] (II) NOUVEAU(G0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 1767.348] (II) NOUVEAU(G0): EDID (in hex):
[ 1767.348] (II) NOUVEAU(G0): 00ffffffffffff0010ac9aa04c505032
[ 1767.348] (II) NOUVEAU(G0): 29170104a5351e783aa0a5a656529d27
[ 1767.348] (II) NOUVEAU(G0): 0f5054a54b00714f8180a9c0d1c00101
[ 1767.348] (II) NOUVEAU(G0): 010101010101023a801871382d40582c
[ 1767.348] (II) NOUVEAU(G0): 45000f292100001e000000ff00333657
[ 1767.348] (II) NOUVEAU(G0): 4a583341393250504c0a000000fc0044
[ 1767.348] (II) NOUVEAU(G0): 454c4c205032343134480a20000000fd
[ 1767.348] (II) NOUVEAU(G0): 00384c1e5311000a202020202020004f
[ 1767.348] (II) NOUVEAU(G0): Printing probed modes for output DP-1-2
[ 1767.348] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 1767.348] (II) NOUVEAU(G0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 1767.348] (II) NOUVEAU(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1767.348] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[ 1767.348] (**) NOUVEAU(G0): Mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz
[ 1767.348] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz)
[ 1767.348] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 1767.348] (II) Loading sub module "fb"
[ 1767.348] (II) LoadModule: "fb"
[ 1767.348] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1767.348] (II) Module fb: vendor="X.Org Foundation"
[ 1767.348] compiled for 1.14.5, module version = 1.0.0
[ 1767.348] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1767.348] (II) Loading sub module "exa"
[ 1767.348] (II) LoadModule: "exa"
[ 1767.348] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 1767.348] (II) Module exa: vendor="X.Org Foundation"
[ 1767.348] compiled for 1.14.5, module version = 2.6.0
[ 1767.348] ABI class: X.Org Video Driver, version 14.1
[ 1767.348] (II) Loading sub module "shadowfb"
[ 1767.348] (II) LoadModule: "shadowfb"
[ 1767.348] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 1767.348] (II) Module shadowfb: vendor="X.Org Foundation"
[ 1767.348] compiled for 1.14.5, module version = 1.0.0
[ 1767.348] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1767.348] (--) Depth 24 pixmap format is 32 bpp
[ 1767.351] (II) NOUVEAU(G0): Opened GPU channel 0
[ 1767.359] (II) NOUVEAU(G0): [DRI2] Setup complete
[ 1767.359] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
[ 1767.359] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
[ 1767.360] (II) EXA(256): Driver allocated offscreen pixmaps
[ 1767.360] (II) EXA(256): Driver registered support for the following operations:
[ 1767.360] (II) Solid
[ 1767.360] (II) Copy
[ 1767.360] (II) Composite (RENDER acceleration)
[ 1767.360] (II) UploadToScreen
[ 1767.360] (II) DownloadFromScreen
[ 1767.360] (==) NOUVEAU(G0): Backing store disabled
[ 1767.360] (==) NOUVEAU(G0): Silken mouse enabled
[ 1767.360] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 1767.360] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[ 1767.360] (==) NOUVEAU(G0): DPMS enabled
[ 1767.360] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1767.360] (WW) NOUVEAU(G0): Option "Monitor-DVI-I-1" is not used
[ 1767.360] (WW) NOUVEAU(G0): Option "Monitor-DP-1" is not used
[ 1767.362] (II) NOUVEAU(0): Opened GPU channel 0
[ 1767.366] (II) NOUVEAU(0): [DRI2] Setup complete
[ 1767.366] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 1767.366] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 1767.366] (II) EXA(0): Driver allocated offscreen pixmaps
[ 1767.366] (II) EXA(0): Driver registered support for the following operations:
[ 1767.366] (II) Solid
[ 1767.366] (II) Copy
[ 1767.366] (II) Composite (RENDER acceleration)
[ 1767.366] (II) UploadToScreen
[ 1767.366] (II) DownloadFromScreen
[ 1767.366] (==) NOUVEAU(0): Backing store disabled
[ 1767.366] (==) NOUVEAU(0): Silken mouse enabled
[ 1767.366] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 1767.366] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 1767.366] (==) NOUVEAU(0): DPMS enabled
[ 1767.366] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1767.366] (--) RandR disabled
[ 1767.388] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1767.388] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1767.388] (II) AIGLX: enabled GLX_ARB_create_context
[ 1767.388] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 1767.388] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 1767.388] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1767.388] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1767.389] (II) AIGLX: Loaded and initialized nouveau
[ 1767.389] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1767.390] (II) NOUVEAU(G0): NVEnterVT is called.
[ 1767.393] (II) NOUVEAU(0): NVEnterVT is called.
[ 1767.444] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[ 1767.444] resize called 1920 1080
[ 1767.479] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 1767.479] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1767.479] (II) LoadModule: "evdev"
[ 1767.479] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1767.479] (II) Module evdev: vendor="X.Org Foundation"
[ 1767.479] compiled for 1.14.3, module version = 2.8.2
[ 1767.479] Module class: X.Org XInput Driver
[ 1767.479] ABI class: X.Org XInput driver, version 19.1
[ 1767.479] (II) Using input driver 'evdev' for 'Power Button'
[ 1767.479] (**) Power Button: always reports core events
[ 1767.479] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 1767.479] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1767.479] (--) evdev: Power Button: Found keys
[ 1767.479] (II) evdev: Power Button: Configuring as keyboard
[ 1767.479] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
[ 1767.479] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1767.479] (**) Option "xkb_rules" "evdev"
[ 1767.479] (**) Option "xkb_model" "pc104"
[ 1767.479] (**) Option "xkb_layout" "us"
[ 1767.499] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 1767.499] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1767.499] (II) Using input driver 'evdev' for 'Power Button'
[ 1767.500] (**) Power Button: always reports core events
[ 1767.500] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 1767.500] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1767.500] (--) evdev: Power Button: Found keys
[ 1767.500] (II) evdev: Power Button: Configuring as keyboard
[ 1767.500] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event1"
[ 1767.500] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 1767.500] (**) Option "xkb_rules" "evdev"
[ 1767.500] (**) Option "xkb_model" "pc104"
[ 1767.500] (**) Option "xkb_layout" "us"
[ 1767.500] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
[ 1767.500] (II) No input driver specified, ignoring this device.
[ 1767.500] (II) This device may have been added with another device file.
[ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[ 1767.500] (II) No input driver specified, ignoring this device.
[ 1767.500] (II) This device may have been added with another device file.
[ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
[ 1767.501] (II) No input driver specified, ignoring this device.
[ 1767.501] (II) This device may have been added with another device file.
[ 1767.501] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[ 1767.501] (II) No input driver specified, ignoring this device.
[ 1767.501] (II) This device may have been added with another device file.
[ 1767.501] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 1767.501] (II) No input driver specified, ignoring this device.
[ 1767.501] (II) This device may have been added with another device file.
[ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
[ 1767.501] (II) No input driver specified, ignoring this device.
[ 1767.501] (II) This device may have been added with another device file.
[ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event8)
[ 1767.501] (II) No input driver specified, ignoring this device.
[ 1767.501] (II) This device may have been added with another device file.
[ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event7)
[ 1767.501] (II) No input driver specified, ignoring this device.
[ 1767.501] (II) This device may have been added with another device file.
[ 1767.502] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10)
[ 1767.502] (II) No input driver specified, ignoring this device.
[ 1767.502] (II) This device may have been added with another device file.
[ 1767.502] (II) config/udev: Adding input device DELL Dell USB Entry Keyboard (/dev/input/event4)
[ 1767.502] (**) DELL Dell USB Entry Keyboard: Applying InputClass "evdev keyboard catchall"
[ 1767.502] (II) Using input driver 'evdev' for 'DELL Dell USB Entry Keyboard'
[ 1767.502] (**) DELL Dell USB Entry Keyboard: always reports core events
[ 1767.502] (**) evdev: DELL Dell USB Entry Keyboard: Device: "/dev/input/event4"
[ 1767.502] (--) evdev: DELL Dell USB Entry Keyboard: Vendor 0x413c Product 0x2107
[ 1767.502] (--) evdev: DELL Dell USB Entry Keyboard: Found keys
[ 1767.502] (II) evdev: DELL Dell USB Entry Keyboard: Configuring as keyboard
[ 1767.502] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input5/event4"
[ 1767.502] (II) XINPUT: Adding extended input device "DELL Dell USB Entry Keyboard" (type: KEYBOARD, id 8)
[ 1767.502] (**) Option "xkb_rules" "evdev"
[ 1767.502] (**) Option "xkb_model" "pc104"
[ 1767.502] (**) Option "xkb_layout" "us"
[ 1767.502] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
[ 1767.502] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 1767.502] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 1767.502] (**) Logitech USB Optical Mouse: always reports core events
[ 1767.502] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event5"
[ 1767.502] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077
[ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 1767.502] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 1767.502] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 1767.503] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 1767.503] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1767.503] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input6/event5"
[ 1767.503] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[ 1767.503] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 1767.503] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 1767.503] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 1767.503] (II) No input driver specified, ignoring this device.
[ 1767.503] (II) This device may have been added with another device file.
[ 1767.503] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 1767.503] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
[ 1767.503] (II) No input driver specified, ignoring this device.
[ 1767.503] (II) This device may have been added with another device file.
[ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[ 1767.504] (II) No input driver specified, ignoring this device.
[ 1767.504] (II) This device may have been added with another device file.
[ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
[ 1767.504] (II) No input driver specified, ignoring this device.
[ 1767.504] (II) This device may have been added with another device file.
[ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
[ 1767.504] (II) No input driver specified, ignoring this device.
[ 1767.504] (II) This device may have been added with another device file.
[ 1767.504] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1767.504] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1767.504] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1767.504] (**) AT Translated Set 2 keyboard: always reports core events
[ 1767.504] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 1767.504] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 1767.504] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 1767.504] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 1767.504] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 1767.504] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 1767.504] (**) Option "xkb_rules" "evdev"
[ 1767.504] (**) Option "xkb_model" "pc104"
[ 1767.504] (**) Option "xkb_layout" "us"
[ 1767.505] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event19)
[ 1767.505] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 1767.505] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 1767.505] (**) PS/2 Generic Mouse: always reports core events
[ 1767.505] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event19"
[ 1767.505] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
[ 1767.505] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
[ 1767.505] (--) evdev: PS/2 Generic Mouse: Found relative axes
[ 1767.505] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
[ 1767.505] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
[ 1767.505] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 1767.505] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1767.505] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event19"
[ 1767.505] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 11)
[ 1767.505] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
[ 1767.505] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 1767.505] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[ 1767.505] (II) No input driver specified, ignoring this device.
[ 1767.505] (II) This device may have been added with another device file.
[ 1767.505] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 1767.505] (II) No input driver specified, ignoring this device.
[ 1767.505] (II) This device may have been added with another device file.
[ 1774.230] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1774.230] (II) NOUVEAU(0): NVLeaveVT is called.
[ 1774.230] (II) NOUVEAU(G0): NVLeaveVT is called.
[ 1779.499] (II) evdev: PS/2 Generic Mouse: Close
[ 1779.499] (II) UnloadModule: "evdev"
[ 1779.499] (II) evdev: AT Translated Set 2 keyboard: Close
[ 1779.499] (II) UnloadModule: "evdev"
[ 1779.499] (II) evdev: Logitech USB Optical Mouse: Close
[ 1779.499] (II) UnloadModule: "evdev"
[ 1779.499] (II) evdev: DELL Dell USB Entry Keyboard: Close
[ 1779.499] (II) UnloadModule: "evdev"
[ 1779.499] (II) evdev: Power Button: Close
[ 1779.499] (II) UnloadModule: "evdev"
[ 1779.499] (II) evdev: Power Button: Close
[ 1779.499] (II) UnloadModule: "evdev"
[ 1779.499] (II) NOUVEAU(G0): NVLeaveVT is called.
[ 1780.500] Error dropping master: -22(Invalid argument)
[ 1780.501] (II) NOUVEAU(G0): Closed GPU channel 0
[ 1780.503] (II) NOUVEAU(0): Closed GPU channel 0
[ 1780.503] (EE) Server terminated successfully (0). Closing log file.
Thanks for any help!I have a similar issue except with two ATI cards and four monitors.
I have a working xorg.conf that uses Xinerama and all 4 work but have been trying to get xrandr to work since xinerama is deprecated supposedly.
I would like to switch to xrandr but there is some kind of magic voodoo I have with my current xorg.conf that doesn't even work on an exact same machine and cards that I tried to setup for a co-worker.
lspci:
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610 [Radeon HD 2400 PRO/XT]
04:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610 [Radeon HD 2400 PRO/XT]
My xorg.conf:
Section "Device"
Identifier "ATI0"
Driver "radeon"
BusID "PCI:1:0:0"
Option "ZaphodHeads" "DVI-0"
Screen 0
EndSection
Section "Device"
Identifier "ATI1"
Driver "radeon"
BusID "PCI:1:0:0"
Option "ZaphodHeads" "DVI-1"
Screen 1
EndSection
Section "Device"
Identifier "ATI2"
Driver "radeon"
BusID "PCI:4:0:0"
Option "ZaphodHeads" "DVI-2"
Screen 0
EndSection
Section "Device"
Identifier "ATI3"
Driver "radeon"
BusID "PCI:4:0:0"
Option "ZaphodHeads" "DVI-3"
Screen 1
EndSection
Section "Monitor"
Identifier "DVI-0"
Option "Primary" "On"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
EndSection
Section "Monitor"
Identifier "DVI-1"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
EndSection
Section "Monitor"
Identifier "DVI-2"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
EndSection
Section "Monitor"
Identifier "DVI-3"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
EndSection
Section "Screen"
Identifier "Screen0"
Device "ATI0"
Monitor "DVI-0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "ATI1"
Monitor "DVI-1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "ATI2"
Monitor "DVI-2"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen3"
Device "ATI3"
Monitor "DVI-3"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Screen0" 0 0
Screen "Screen1" RightOf "Screen0"
Screen "Screen2" Above "Screen1"
Screen "Screen3" Above "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "1"
EndSection
My Xorg.0.log shows all the DVI connections when I don't use a xorg.conf file but only two are "connected"
I see DVI-0 and DVI-1 connected and in "xrandr -q" but in Xorg.0.log I see DVI-1-2 and DVI-1-3.
xrandr --listproviders show the two cards as well.
Tried "xrandr --setprovideroutputsource 1 0" and they show up in KDE but as clones and then X crashes eventually.
"xrandr --setprovideroutputsource 0 1" just plain crashes X
Maybe you are looking for
-
Error message while creating a template.
when i create the 10 th WBS element in second level and save it,the system gives the error message"Project Number and WBS Number mismatch" But i am not getting this error till 9th WBS element in second level.In project coding mask the project numberi
-
Parsing query and getting list of tables used
Hi All, I require to parse sql query (simple & complex as well) and to get the list of tables used in the query. And need to validate that, the list of tables against a whitelist to maintained in the file. I tried to write my own parser, sinc
-
Error 1310.Error writing to file for CS2 install on Win7 for Adobe 7 Pro
I have Adobe 7 Pro that needs to be installed on a Win7 machine that is not supported by Adobe. They provide a CS2 version with a new serial number for replacement of my product since my product cannot be activated anymore. When I try to install it,
-
How to change you security questions if you have forggot them ?
How to change you security questions if you have forggot them ?
-
Previous business day in sql query
Hi, Is there a way to calculate the previous business day on teh sql query without using a function call. Typically in the query where clause as seen below: eg) select * from sales where sale_date ='+previous_buss_day+' If so please let me know....Th