Issue using BAPI_MATERIAL_SAVEDATA

hi
I am using BAPI_MATERIAL_SAVEDATA to create a material master record
its a ANUB (Non Valued Material)
i ma facing one prblem that when i am mentioning plant in
PLANTDATA      LIKE     BAPI_MARC
i just want to mention its plant and profit center but its asking me
purchasing group
mrp type
plnd del days etc
but when i m creating a material via MM01 its working fine without inserting all this material is getting created and i have checked in MARC table purchasing group
                         mrp type
                         plnd del days etc are blank
so please help me on this
thanxs in advance
regards
Rajan

hi
its solved
in header data i nned to select only 2 views
basic data
STORAGE_VIEW
and unbw is a standard one but here we have creted other mat type aunb
thnxs for your help
regards
rajan

Similar Messages

Using BAPI_MATERIAL_SAVEDATA field SPECPROCTY in marc is not populated

Hi all,
I'm using BAPI_MATERIAL_SAVEDATA to create new material and I populate plantdata-SPECPROCTY with 'L1'and I populate plantdatax-SPPROCTYPE with 'X' so that the Special procurement type field in view MRP2 from MM03 will contain the value 'L1'.
This does not work for some reason. I looked at the config of the created Spec Proc Type L1 and all looks good.
Could someone help me out!
Best Regards!
Curtis

Hi,
For creation of MRP2 data there are few other fields which you have to fill. Ensure to pass the data into the following fields.
wa_plantdata-plant
wa_plantdata-mrp_type
wa_plantdata-mrp_ctrler
wa_plantdata-reorder_pt
wa_plantdata-lotsizekey
wa_plantdata-round_val
wa_plantdata-sm_key = '000'
wa_plantdata-spproctype
wa_plantdata-sloc_exprc
wa_plantdata-serv_level
I had the same issue. I was able to successfully create the data. Let me know if you need any input. Apart from this you might to use the BAPI " 'MD_MRP_LEVEL_CREATE_DATA" for creation MRP forecast. This is not required at this point of the time but just an FYI.
Regards,
Jagath S

Error while creating a material using Bapi_material_savedata

Hi,
there is an error encountered while creating a material using BAPI_MATERIAL_SAVEDATA..
The Error description is " Material description is not transfered " even after supplying the Material description and other mandatory field information like industrial sector, material type ,basic view indicator,Base UOM,Base UOM ISO code.
Please let me know the solution, if you know.

Hi,
Please search the SCN for the answers
https://www.sdn.sap.com/irj/scn/advancedsearch?query=errorinBAPI_MATERIAL_SAVEDATA+&cat=sdn_all

Problem in using BAPI_MATERIAL_SAVEDATA

I want to extend a Material from Plant A to Plant B. I am getting the following error.
E   MM         360 Key fields for user data PLANTDATA and checkbox structure PLANTDATAX are different
Please correct in the following code
data: la_headdata type BAPIMATHEAD,
la_clientdata type BAPI_MARA,
la_CLIENTDATAX type BAPI_MARAX,
la_PLANTDATA type BAPI_marc,    "Plant View
la_PLANTDATAX type bapi_marcx, "Plant View
la_mbew type bapi_mbew,    "Accounting View
la_mbewx type bapi_mbewx.
*la_return type BAPIRET2.
*to return messages
DATA:BEGIN OF la_RETURN OCCURS 0.
        INCLUDE STRUCTURE BAPIRET2.
DATA:END OF la_RETURN.
data: i_materialdescription type table of BAPI_MAKT,
      wa_mat_desc like line of i_materialdescription.
Header
la_headdata-MATERIAL = '000001000000004000'.
la_headdata-IND_SECTOR = 'M'.
la_headdata-MATL_TYPE = 'ZALB'.
    la_headdata-basic_view      = 'X'.
    la_headdata-purchase_view   = 'X'.
    la_headdata-account_view    = 'X'.
    la_headdata-MRP_VIEW        = 'X'.
    la_headdata-STORAGE_VIEW    = 'X'.
    la_headdata-COST_VIEW       = 'X'.
Client Data - Basic
la_clientdata-BASE_UOM = 'EA'.
la_CLIENTDATAX-BASE_UOM = 'X'.
la_clientdata-MATL_GROUP = '21001000'.
la_CLIENTDATAX-MATL_GROUP = 'X'.
la_clientdata-unit_of_wt     = 'KG'.
la_clientdatax-unit_of_wt    = 'X'.
la_clientdata-division       = '10'.
la_clientdatax-division      = 'X'.
Material Description
wa_mat_desc-langu           = 'E'.
wa_mat_desc-MATL_DESC = '+TLA,FILTER KIT,BUNDLE B'.
append wa_mat_desc to i_materialdescription.
clear: wa_mat_desc.
Plant - Purchasing
la_PLANTDATA-plant     = '5530'.
la_PLANTDATAX-plant     = 'X'.
la_PLANTDATA-pur_group     = '006'.
la_PLANTDATAX-pur_group    = 'X'.
Accounting
la_mbew-val_area = '5530'.
la_mbewx-val_area = 'X'.
la_mbew-price_ctrl = 'S'.
la_mbewx-price_ctrl = 'X'.
la_mbew-std_price = '0.01'.
la_mbewx-std_price = 'X'.
*la_mbew-price_unit = '1.000'.
*la_mbewx-price_unit = 'X'.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = la_headdata
CLIENTDATA = la_clientdata
CLIENTDATAX = la_CLIENTDATAX
PLANTDATA = la_PLANTDATA
PLANTDATAX = la_PLANTDATAX
FORECASTPARAMETERS =
FORECASTPARAMETERSX =
PLANNINGDATA =
PLANNINGDATAX =
STORAGELOCATIONDATA =
STORAGELOCATIONDATAX =
VALUATIONDATA = la_mbew
VALUATIONDATAX = la_mbewx
WAREHOUSENUMBERDATA =
WAREHOUSENUMBERDATAX =
SALESDATA =
SALESDATAX =
STORAGETYPEDATA =
STORAGETYPEDATAX =
FLAG_ONLINE = ' '
FLAG_CAD_CALL = ' '
IMPORTING
RETURN = la_return
TABLES
MATERIALDESCRIPTION = i_materialdescription
UNITSOFMEASURE =
UNITSOFMEASUREX =
INTERNATIONALARTNOS =
MATERIALLONGTEXT =
TAXCLASSIFICATIONS =
RETURNMESSAGES =
PRTDATA =
PRTDATAX =
EXTENSIONIN =
EXTENSIONINX =
read table la_return with key TYPE = 'S'.
if sy-subrc = 0.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
endif.
WRITE:/ la_RETURN-TYPE,
    2 la_RETURN-ID,
    22 la_RETURN-NUMBER,
    25 la_RETURN-MESSAGE.

Hi,
hope this code gives you an idea
*& Report ZKAR_MATMAS_BAPI
*& This program demonstrates how easy it is to create Material master
*& data using BAPI_MATERIAL_SAVEDATA
*& The program also generates a report post-execution displaying errors
*& as well as successful uploads
REPORT ZKAR_MATMAS_BAPI.
* TABLES
* FLAGS *
DATA: F_STOP. " Flag used to stop processing
* DATA DECLARATIONS *
DATA : V_EMPTY TYPE I, " No. of empty records
V_TOTAL TYPE I. " Total no. of records.
* STRUCTURES & INTERNAL TABLES
*BAPI structures
DATA: BAPI_HEAD LIKE BAPIMATHEAD, " Header Segment with Control Information
BAPI_MAKT LIKE BAPI_MAKT, " Material Description
BAPI_MARA1 LIKE BAPI_MARA, " Client Data
BAPI_MARAX LIKE BAPI_MARAX, " Checkbox Structure for BAPI_MARA
BAPI_MARC1 LIKE BAPI_MARC, " Plant View
BAPI_MARCX LIKE BAPI_MARCX, " Checkbox Structure for BAPI_MARC
BAPI_MBEW1 LIKE BAPI_MBEW, " Accounting View
BAPI_MBEWX LIKE BAPI_MBEWX, " Checkbox Structure for BAPI_MBEW
BAPI_RETURN LIKE BAPIRET2. " Return Parameter
*--- Internal table to hold excel file data
DATA: IT_INTERN TYPE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
*--- Internal table to hold Matetrial descriptions
DATA: BEGIN OF IT_MAKT OCCURS 100.
        INCLUDE STRUCTURE BAPI_MAKT.
DATA: END OF IT_MAKT.
*--- Internal to hold the records in the text file
DATA : BEGIN OF IT_DATA OCCURS 100,
            WERKS(4), " Plant
            MTART(4), " Material type
            MATNR(18), " Material number
            MATKL(9) , " Material group
            MBRSH(1), " Industry sector
            MEINS(3), " Base unit of measure
            GEWEI(3), " Weight Unit
            SPART(2), " Division
            EKGRP(3), " Purchasing group
            VPRSV(1), " Price control indicator
            STPRS(12), " Standard price
            PEINH(3), " Price unit
            SPRAS(2), " Language key
            MAKTX(40), " Material description
            END OF IT_DATA.
* SELECTION SCREEN. *
SELECTION-SCREEN BEGIN OF BLOCK SCR1 WITH FRAME TITLE TEXT-111.
PARAMETER : P_FILE TYPE RLGRAP-FILENAME OBLIGATORY DEFAULT " Input File
'C:\Material_master.XLS'.
PARAMETER : P_MAX(4) OBLIGATORY DEFAULT '100'. " no.of recs in a session
PARAMETERS: P_HEADER TYPE I DEFAULT 0. " Header Lines
PARAMETERS: P_BEGCOL TYPE I DEFAULT 1 NO-DISPLAY,
P_BEGROW TYPE I DEFAULT 1 NO-DISPLAY,
P_ENDCOL TYPE I DEFAULT 100 NO-DISPLAY,
P_ENDROW TYPE I DEFAULT 32000 NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK SCR1.
* AT SELECTION-SCREEN *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
*--- Validating file
PERFORM VALIDATE_FILE USING P_FILE.
* START-OF-SELECTION
START-OF-SELECTION.
*--- Perform to convert the Excel data into an internal table
PERFORM CONVERT_XLS_ITAB.
IF NOT IT_DATA[] IS INITIAL.
*--- Perform to delete Header lines
    PERFORM DELETE_HEADER_EMPTY_RECS.
ENDIF.
* END OF SELECTION. *
END-OF-SELECTION.
*--- Perform to upload Material Master data
PERFORM UPLOAD_MATMAS.
* Form : validate_input_file
* Description : To provide F4 help for file if read from PC
FORM VALIDATE_FILE USING F_FILE TYPE RLGRAP-FILENAME.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    CHANGING
      FILE_NAME     = F_FILE
    EXCEPTIONS
      MASK_TOO_LONG = 1
      OTHERS        = 2.
IF SY-SUBRC <> 0.
    MESSAGE S010(ZLKPL_MSGCLASS). " 'Error in getting filename'.
ENDIF.
ENDFORM. " validate_input_file
*& Form CONVER_XLS_ITAB
* text
FORM CONVERT_XLS_ITAB.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      FILENAME    = P_FILE
      I_BEGIN_COL = P_BEGCOL
      I_BEGIN_ROW = P_BEGROW
      I_END_COL   = P_ENDCOL
      I_END_ROW   = P_ENDROW
    TABLES
      INTERN      = IT_INTERN.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*--- Perform to move the data into an internal data
PERFORM MOVE_DATA.
ENDFORM. " CONVERT_XLS_ITAB
*& Form MOVE_DATA
* text
FORM MOVE_DATA.
DATA : LV_INDEX TYPE I.
FIELD-SYMBOLS <FS>.
*--- Sorting the internal table
SORT IT_INTERN BY ROW COL.
CLEAR IT_INTERN.
LOOP AT IT_INTERN.
    MOVE IT_INTERN-COL TO LV_INDEX.
*--- Assigning the each record to an internal table row
    ASSIGN COMPONENT LV_INDEX OF STRUCTURE IT_DATA TO <FS>.
*--- Asigning the field value to a field symbol
    MOVE IT_INTERN-VALUE TO <FS>.
    AT END OF ROW.
      APPEND IT_DATA.
      CLEAR IT_DATA.
    ENDAT.
ENDLOOP.
ENDFORM. " MOVE_DATA
*& Form DELETE_HEADER_EMPTY_RECS
* To delete the Header and empty records
FORM DELETE_HEADER_EMPTY_RECS.
DATA: LV_TABIX LIKE SY-TABIX.
IF NOT P_HEADER IS INITIAL.
    LOOP AT IT_DATA.
      IF P_HEADER > 0 AND NOT IT_DATA IS INITIAL.
        DELETE IT_DATA FROM 1 TO P_HEADER.
* P_HEADER = 0.
        EXIT.
      ENDIF.
    ENDLOOP.
ENDIF.
CLEAR IT_DATA.
*--- To delete the empty lines from internal table
LOOP AT IT_DATA.
    LV_TABIX = SY-TABIX.
    IF IT_DATA IS INITIAL.
      V_EMPTY = V_EMPTY + 1.
      DELETE IT_DATA INDEX LV_TABIX..
    ENDIF.
ENDLOOP.
CLEAR IT_DATA.
*--- Total no of recs in file
DESCRIBE TABLE IT_DATA LINES V_TOTAL.
IF V_TOTAL = 0.
    MESSAGE I013(ZLKPL_MSGCLASS). " No records in the file
    F_STOP = 'X'.
    STOP.
ENDIF.
ENDFORM. " DELETE_HEADER_EMPTY_RECS
*& Form UPLOAD_MATMAS
* to upload Material Master data
FORM UPLOAD_MATMAS .
LOOP AT IT_DATA.
* Header
    UNPACK IT_DATA-MATNR TO IT_DATA-MATNR.
    BAPI_HEAD-MATERIAL = IT_DATA-MATNR.
    BAPI_HEAD-IND_SECTOR = IT_DATA-MBRSH.
    BAPI_HEAD-MATL_TYPE = IT_DATA-MTART.
    BAPI_HEAD-BASIC_VIEW = 'X'.
    BAPI_HEAD-PURCHASE_VIEW = 'X'.
    BAPI_HEAD-ACCOUNT_VIEW = 'X'.
* Material Description
    REFRESH IT_MAKT.
    IT_MAKT-LANGU = IT_DATA-SPRAS.
    IT_MAKT-MATL_DESC = IT_DATA-MAKTX.
    APPEND IT_MAKT.
* Client Data - Basic
    BAPI_MARA1-MATL_GROUP = IT_DATA-MATKL.
    BAPI_MARA1-BASE_UOM = IT_DATA-MEINS.
    BAPI_MARA1-UNIT_OF_WT = IT_DATA-GEWEI.
    BAPI_MARA1-DIVISION = IT_DATA-SPART.
    BAPI_MARAX-MATL_GROUP = 'X'.
    BAPI_MARAX-BASE_UOM = 'X'.
    BAPI_MARAX-UNIT_OF_WT = 'X'.
    BAPI_MARAX-DIVISION = 'X'.
* Plant - Purchasing
    BAPI_MARC1-PLANT = IT_DATA-WERKS.
    BAPI_MARC1-PUR_GROUP = IT_DATA-EKGRP.
    BAPI_MARCX-PLANT = IT_DATA-WERKS.
    BAPI_MARCX-PUR_GROUP = 'X'.
* Accounting
    BAPI_MBEW1-VAL_AREA = IT_DATA-WERKS.
    BAPI_MBEW1-PRICE_CTRL = IT_DATA-VPRSV.
    BAPI_MBEW1-STD_PRICE = IT_DATA-STPRS.
    BAPI_MBEW1-PRICE_UNIT = IT_DATA-PEINH.
    BAPI_MBEWX-VAL_AREA = IT_DATA-WERKS.
    BAPI_MBEWX-PRICE_CTRL = 'X'.
    BAPI_MBEWX-STD_PRICE = 'X'.
    BAPI_MBEWX-PRICE_UNIT = 'X'.
*--- BAPI to create material
    CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
    EXPORTING
    HEADDATA = BAPI_HEAD
    CLIENTDATA = BAPI_MARA1
    CLIENTDATAX = BAPI_MARAX
    PLANTDATA = BAPI_MARC1
    PLANTDATAX = BAPI_MARCX
* FORECASTPARAMETERS =
* FORECASTPARAMETERSX =
* PLANNINGDATA =
* PLANNINGDATAX =
* STORAGELOCATIONDATA =
* STORAGELOCATIONDATAX =
* VALUATIONDATA = BAPI_MBEW1
* VALUATIONDATAX = BAPI_MBEWX
* WAREHOUSENUMBERDATA =
* WAREHOUSENUMBERDATAX =
* SALESDATA = BAPI_MVKE1
* SALESDATAX = BAPI_MVKEX
* STORAGETYPEDATA =
* STORAGETYPEDATAX =
    IMPORTING
    RETURN = BAPI_RETURN
    TABLES
    MATERIALDESCRIPTION = IT_MAKT
* UNITSOFMEASURE =
* UNITSOFMEASUREX =
* INTERNATIONALARTNOS =
* MATERIALLONGTEXT =
* TAXCLASSIFICATIONS =
* RETURNMESSAGES =
* PRTDATA =
* PRTDATAX =
* EXTENSIONIN =
* EXTENSIONINX =
    IF BAPI_RETURN-TYPE = 'E'.
      WRITE:/ 'Error:' ,BAPI_RETURN-MESSAGE ,'for material:' ,IT_DATA-MATNR.
    ELSEIF BAPI_RETURN-TYPE = 'S'.
      WRITE: 'Successfully created material' ,IT_DATA-MATNR.
    ENDIF.
ENDLOOP.
ENDFORM. " UPLOAD_MATMAS
Regards,
V.Balaji
Reward if Usefull...

How to add classification view using BAPI_MATERIAL_SAVEDATA

Hi,
Please any one let me know how to add classification view using BAPI_MATERIAL_SAVEDATA to the material master.
Thanks,
shekar

We use this bapi on a regular basis as well as classification of materials. We have success doing this in 2 steps. First step is to save the material using BAPI_MATERIAL_SAVEDATA, second step is to save classification using BAPI_OBJCL_CHANGE (this can be used for both create and change) Also look at Function Group CLBPA . there are several bapi's in that group dealing with object classification, including the one I mentioned..

Is there an issue using file vault 2 on a Mac fusion drive

is there an issue using file vault 2 on a Mac fusion drive

I'm using that configuration and it works for me. There have been some reports of kernel panics with FileVault and SSD's. The cause is unknown. Chances are you'll be fine, but make good backups.

Goods Issue using BAPI_GOODSMVT_CREATE movement type 541

Hi
According to my requirement I need to do Post goods issue using BAPI_GOODSMVT_CREATE. But I am unable to do PGI . how to consume BOM details if batches are changed. please let me know what values I need to pass to BAPI . give with an example.
Its an urgent requirement.

are you passing batch number to the BAPI?
if not try pass the batch number the rest of the things bapi will take care of.
bi

Post Goods issue using bapi_goodsmvt_create

hi,
Iam trying to do post goods issue using bapi_goodsmvt_create. please let me know what are the mandatory fields to be passed?

hi,
*& Report ZRPT_SUB_KO01GOODSMOVEMENT
REPORT ZRPT_SUB_KO01GOODSMOVEMENT.
PARAMETERS : P_BAG(17) TYPE C,
             P_ZZORG LIKE zaUFK-ZZORG,
             P_MATNR LIKE MARA-MATNR,
             P_WERKS LIKE AUFK-WERKS,
             P_WERK LIKE AFPO-PWERK,
             P_DATE LIKE MKPF-BUDAT,
             P_LGORT LIKE GOITEM-LGOBE.
DATA : BDC_DATA TYPE STANDARD TABLE OF BDCDATA. "internla table for bdc data
DATA : WA_BDC_DATA TYPE BDCDATA .                "work area for bdc data
DATA : T_XMSEG TYPE   MSEG.
DATA : T_XMKPF TYPE MKPF.
DATA : V_BAGS1(17) TYPE C.
DATA : BEGIN OF WA_MB1B,
       ZZGCODE TYPE ZMIGO-ZZGCODE,
       ZZGBAGS TYPE ZMIGO-ZZGBAGS,
       WERKS TYPE AUFK-WERKS,
       LGORT TYPE VBRP-LGORT,
       ZZORG TYPE zAUFK-ZZORG,
       END OF WA_MB1B.
DATA : V_MATERIAL TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
data : v_date(10) type c.
DATA : T_GOODSMVT_HEADER TYPE BAPI2017_GM_HEAD_01,
       T_GOODSMVT_CODE TYPE BAPI2017_GM_CODE,
       T_GOODSMVT_ITEM TYPE STANDARD TABLE OF BAPI2017_GM_ITEM_CREATE,
       T_RETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
DATA : WA_GOODSMVT_ITEM TYPE BAPI2017_GM_ITEM_CREATE.
DATA : BEGIN OF S_MARA,
       MEINS LIKE MARA-MEINS,
       END OF S_MARA.
DATA : MATERIALDOCUMENT TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
*FORM GOODSMOVEMENT TABLES T_RETURN
                         USING WA_MB1B LIKE WA_MB1B.
SELECT SINGLE MEINS
               FROM MARA
               INTO S_MARA
               WHERE MATNR = P_MATNR.
   CONCATENATE p_date6(2) p_date4(2) p_date+0(4) INTO V_DATE SEPARATED BY '.'.
    T_GOODSMVT_HEADER-PSTNG_DATE = P_DATE.
    T_GOODSMVT_HEADER-DOC_DATE = P_DATE.
    T_GOODSMVT_CODE-GM_CODE = '04'.
    WA_GOODSMVT_ITEM-MATERIAL =      P_MATNR.                    "'000000000000001556'.
    WA_GOODSMVT_ITEM-PLANT =        P_WERK.                     " '1000'.
    WA_GOODSMVT_ITEM-STGE_LOC =      P_LGORT.                    " '0001'.
    WA_GOODSMVT_ITEM-MOVE_TYPE =     'Z42'.
    WA_GOODSMVT_ITEM-VENDOR =         P_ZZORG.                   "'0000100224'.
    WA_GOODSMVT_ITEM-ENTRY_QNT =      P_BAG.                   " '1'.
    WA_GOODSMVT_ITEM-ENTRY_UOM =     S_MARA-MEINS.
    WA_GOODSMVT_ITEM-ENTRY_UOM_ISO = S_MARA-MEINS.
    WA_GOODSMVT_ITEM-MOVE_PLANT = P_WERKS.
    APPEND WA_GOODSMVT_ITEM TO T_GOODSMVT_ITEM.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
      GOODSMVT_HEADER          = T_GOODSMVT_HEADER
      GOODSMVT_CODE            = T_GOODSMVT_CODE
IMPORTING
    MATERIALDOCUMENT           = V_MATERIAL
TABLES
      GOODSMVT_ITEM            = T_GOODSMVT_ITEM
RETURN                        = T_RETURN.
BREAK shailajaa.
           EXPORT t_return to MEMORY ID '123'.
           EXPORT V_MATERIAL TO MEMORY ID 'MAT'.
            CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
     EXPORTING
       WAIT          = ' '.
*ENDFORM.

Create Material Master using BAPI_MATERIAL_SAVEDATA - just the basic view

Hi,
I want to create new material master ( just the basic view ) using BAPI_MATERIAL_SAVEDATA.
No error found in the return parameter, but the material was not created.
Here is my code :
DATA : ld_headdata LIKE bapimathead,
       lt_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE,
       lt_return_comit LIKE bapiret2 OCCURS 0 WITH HEADER LINE,
       lt_return_cl LIKE bapiret2 OCCURS 0 WITH HEADER LINE,
       ld_datum(10),
       ld_uzeit(10).
DATA: ld_matdesc LIKE bapi_makt OCCURS 0 WITH HEADER LINE,
      ld_clientdata LIKE bapi_mara.
Regards,
Hary
ld_headdata-material = 'MATERIAL-01'.
ld_headdata-ind_sector = 'M'.
ld_headdata-matl_type = 'ERSA'.
ld_headdata-basic_view = 'X'.
ld_matdesc-matl_desc = 'TEST MATERIAL'.
ld_matdesc-langu = sy-langu.
APPEND ld_matdesc.
ld_clientdata-base_uom = 'PC'.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
    headdata                    = ld_headdata
    clientdata                  = ld_clientdata
   clientdatax                 =
PLANTDATA                   =
PLANTDATAX                  =
FORECASTPARAMETERS          =
FORECASTPARAMETERSX         =
PLANNINGDATA                =
PLANNINGDATAX               =
STORAGELOCATIONDATA         =
STORAGELOCATIONDATAX        =
VALUATIONDATA               =
VALUATIONDATAX              =
WAREHOUSENUMBERDATA         =
WAREHOUSENUMBERDATAX        =
SALESDATA                   =
SALESDATAX                  =
STORAGETYPEDATA             =
STORAGETYPEDATAX            =
FLAG_ONLINE                 = ' '
FLAG_CAD_CALL               = ' '
NO_DEQUEUE                  = ' '
NO_ROLLBACK_WORK            = ' '
IMPORTING
   return                      = lt_return
TABLES
   materialdescription         = ld_matdesc
UNITSOFMEASURE              =
UNITSOFMEASUREX             =
INTERNATIONALARTNOS         =
MATERIALLONGTEXT            =
TAXCLASSIFICATIONS          =
RETURNMESSAGES              =
PRTDATA                     =
PRTDATAX                    =
EXTENSIONIN                 =
EXTENSIONINX                =
NFMCHARGEWEIGHTS            =
NFMCHARGEWEIGHTSX           =
NFMSTRUCTURALWEIGHTS        =
NFMSTRUCTURALWEIGHTSX       =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT          =
IMPORTING
   return        = lt_return_comit

hi
Hope it will help you.
<REMOVED BY MODERATOR>
REPORT z34332_bdc_create_material .
data: la_headdata type BAPIMATHEAD,
la_clientdata type BAPI_MARA,
la_CLIENTDATAX type BAPI_MARAX,
la_return type BAPIRET2.
data: i_materialdescription type table of BAPI_MAKT,
wa_materialdescription like line of i_materialdescription.
la_headdata-MATERIAL = '000000000000000004'.
la_headdata-IND_SECTOR = 'M'.
la_headdata-MATL_TYPE = 'FERT'.
la_clientdata-BASE_UOM = 'FT3'.
la_CLIENTDATAX-BASE_UOM = 'X'.
la_clientdata-MATL_GROUP = '01'.
la_CLIENTDATAX-MATL_GROUP = 'X'.
wa_materialdescription = 'TEST'.
append wa_materialdescription to i_materialdescription.
clear: wa_materialdescription.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = la_headdata
CLIENTDATA = la_clientdata
CLIENTDATAX = la_CLIENTDATAX
* PLANTDATA =
* PLANTDATAX =
* FORECASTPARAMETERS =
* FORECASTPARAMETERSX =
* PLANNINGDATA =
* PLANNINGDATAX =
* STORAGELOCATIONDATA =
* STORAGELOCATIONDATAX =
* VALUATIONDATA =
* VALUATIONDATAX =
* WAREHOUSENUMBERDATA =
* WAREHOUSENUMBERDATAX =
* SALESDATA =
* SALESDATAX =
* STORAGETYPEDATA =
* STORAGETYPEDATAX =
* FLAG_ONLINE = ' '
* FLAG_CAD_CALL = ' '
IMPORTING
RETURN = la_return
TABLES
MATERIALDESCRIPTION = i_materialdescription
* UNITSOFMEASURE =
* UNITSOFMEASUREX =
* INTERNATIONALARTNOS =
* MATERIALLONGTEXT =
* TAXCLASSIFICATIONS =
* RETURNMESSAGES =
* PRTDATA =
* PRTDATAX =
* EXTENSIONIN =
* EXTENSIONINX =
write: la_return-TYPE, ',', la_return-MESSAGE.
clear: la_headdata, la_return, la_clientdata, la_clientdatax.
Edited by: Alvaro Tejada Galindo on Feb 19, 2008 3:23 PM

I have an issue using Lighting Effects in Adobe Photoshop CC 2014

Hello everyone,
I am having issues using Lighting Effects in Adobe Photoshop CC 2014. I created a duplicate layer that I want to do the effects on, converted it to a smart object and on that same layer went to Filter>Render>Lighting Effects to get to the Lighting Effects screen. When adjusting the parameters (drag/reshape the lights) for either the spotlight or point light, I don't see any changes. Can someone tell me what could be the issue or if I'm doing the steps wrong to apply the effects?
Here are my specs:
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
Processor: Intel(R) Core(TM) i7-2600S CPU @ 2.80GHz (8 CPUs), ~2.8GHz
Memory: 8192MB RAM
Available OS Memory: 8174MB RAM
Card name: AMD Radeon HD 6570
Manufacturer: ATI Technologies Inc.
Display Memory: 743 MB
Dedicated Memory: 1008 MB
Shared Memory: 3831 MB

I am experiencing flickering issues as well. However my issues are with the Fast Color Corrector and the Three Way Color Corrector. It seems as if the color correction tools are causing intermittent flickering on some people's systems.
Additionally when I converted some old PPCC 7.2.2 projects which had the Three Way Color Corrector applied, some clips in sequences would come up as a green screen in the program monitor. If I turned the TWCC off the footage would display correctly in the program window. If I turn the TWCC back on it would display the green screen again.
I haven't found a solution to the flickering but to solve the green screen issue I have to remove the effect, then re apply it. I guess for whatever reason, the 2014 version of PP has issues with 7.2.2 projects where the TWCC was applied.
I'm hoping Adobe will address this soon with an update for the various bugs that have been reported.
PPCC 2014 8.0.1
Win 7 Pro

An issue using the COM components supplied with SAP GUI 6.2 or 6.4

We are having an issue using the COM components supplied with SAP GUI 6.2 or 6.4. We used to have SAP 4.6c and now we have 5.0. When we were on 4.6c, we used these COM components to logon and execute RFC calls and we had much success. Now that we are on 5.0, we cant seem to instance any SAP functions that have something to do with SAP Workflow. We have experienced this problem when using VB6 or .NET, but our existing code that always worked is in VB 6.0.
SAP Components used:
o     SAP Logon Control
o     SAP Function Control
o     Librfc32.dll
o     Other supporting C DLLs and/or COM object supplied with the SAP GUI installation.
For example, if we want to call the RFC ARCHIV_CONNECTION_INSERT, this code fails in VB6 when the Set objworkflow = objFuncCtrl.Add(strFunction) line of code executes. Instead of returning an instance of the object ARCHIV_CONNECTION_INSERT function, no object is created. In 6.2, SAP raises no errors, but the object we are trying to create is still Nothing. If we use 6.4, SAP raises an error SAP data type not supported via a message box and then the object is still = Nothing. Interestingly enough, the 6.2 GUI COM controls dont display the error dialog. The message box that is shown comes from the SAP Function COM Object "SAP.Functions" (wdtfuncs.ocx).
Now, what is interesting is if we use the same code to call a standard function or custom function that doesnt have anything to do with SAP Workflow, then the code works fine. Again, all of our code used to work just fine on an SAP 4.6 system.
Here is the code that fails:
    'SAP Logon control - object for creating connections to an SAP system
    Dim objSAPLogonCtrl As Object
    'SAP connection object
    Dim objConnection As Object
    'Object that will represent the SAP function called
    Dim objSAP As Object
    'SAP function control object - object factory for creating other SAP function objects
    Dim objFuncCtrl As Object
    'Create instance of an SAP logon conrol
    Set objSAPLogonCtrl = CreateObject("SAP.Logoncontrol.1")
    'Create a connection object
    Set objConnection = objSAPLogonCtrl.NewConnection
    'Define connecion parameters
    objConnection.ApplicationServer = "sapvm"
    objConnection.SystemNumber = "00"
    objConnection.Client = "800"
    objConnection.User = "iissap"
    objConnection.Password = "tstadm"
    objConnection.Language = "E"
    objConnection.TraceLevel = 10
    'call the logon method of the connection object
    If objConnection.Logon(0, True) = False Then
        MsgBox Error
        Exit Sub
    End If
    'Create an instance of the SAP Function control object
    Set objFuncCtrl = CreateObject("SAP.Functions")
    'Set the function control connection object
    Set objFuncCtrl.Connection = objConnection
    'Function name to be generated and called
    Dim strFunction As String
    strFunction = <b>"ARCHIV_PROCESS_RFCINPUT"</b>
    'Create an instance of the function defined in strFunction
    Set objworkflow = objFuncCtrl.Add(strFunction)
    If objworkflow Is Nothing Then
        MsgBox "Could not create object " & strFunction
    Else
        MsgBox strFunction & " object created."
    End If
If anyone has seen anything like this or has any ideas, please help!
Mike and Hameed
<b></b>

Hi,
documentation on the Scripting API is available at ftp://ftp.sap.com/pub/sapgui/win/640/scripting/docs/
This API is a replacement of the existing, obsolete COM interfaces.
Best regards,
Christian

Issues using macbook with bootcamp and external apple monitor

I am having issues using an apple external monitor connected to my macbook with bootcamp - in particular, if i connect the monitor to the computer when the computer is already on, it won't work. Also, when i disconnect the monitor fromt he computer, the computer screen will go black and I'll have to re-start
Anybody experienced the same and can help?
Thx

just make sure that while its standing on its side there aren't any plugs or cables on that side. I'm not familiar with the mb port setup, but having power, two usb, and a display cable could prose a problem for sideward standing if they are on separate sides of the machine.
as the first commenter mentioned the orientation of your computer is irrelevant, but you wouldn't want to have the weight of the laptop sitting ontop of a usb or video plug that's coming out the side.

Help with Video Performance Issues using Flash

Asking on behalf of a customer who has been unable to get any answers so far - are you able to help?
Background:
We have a port of our Game Development Kit which allows us to recompile all our games using Crossbridge (http://adobe-flash.github.io/crossbridge/) into SWF without any code modifications.
Overview:
Our framework is using OpenGL for rendering and we have successfully ported it along with the audio and video to run in Flash.
We are experiencing performance issues using Video. We cannot use image sequence as some of the video animations are too long and would increase the download to an unacceptable size. Assets vary between 256x256 - 1024x1024 videos.

Here's the rest of the story. Let me know if you can see any resolution, and I will connect him to the forums. Thank you.
Current Video Solution:
We create an instance of NetConnection, NetStream, and Video according to most samples out there, and invoke draw to rasterize the Video DisplayObject into a BitmapData instance.
The BitmapData instance has a fixed color component layout which is not compatible with Stage3D texture and is therefore has to be reformatted before uploaded to Stage3D Texture (See Code Listing below).
Our Problems:
Performance issues with RGBA conversion (either using copyChannel or manually reformatting is not fast enough) natively in as3; this required for stage3d texture.Copying each channel individual using bitmapdata.Copychannel seems faster, but not significantly faster.
Cannot detect when video frame has been updated, therefore we may copy pixels that are not needed in enterframe (processpixel).
Looping video, our current solution uses the NET_STATUS event Buffer empty; Is there a better way to loop videos than checking buffer and seeking to 0.
Stepping video, loading FLV or MP4 side by side assets from HTTP or embedded does not support stepping? Is there another way?
ActionScript Code Listing:
video_nc = new NetConnection();
video_nc.addEventListener(NetStatusEvent.NET_STATUS , onConnect);
video_nc.addEventListener(AsyncErrorEvent.ASYNC_ERROR , trace);
video_nc.connect(null);
// OnConnect Event:
this.ns = new NetStream(e.target as NetConnection);
eventclient = new Object();
eventclient.onMetaData = onMetaData;
this.ns.client = eventclient;
ns.play(flvfile);
ns.pause();
//onMetaData event:
this.width = infoObject.width;
this.height = infoObject.height;
this.textureWidth = NextPowerOfTwo(this.width);
this.textureHeight = NextPowerOfTwo(this.height);
cliprect = new Rectangle(0, 0, this.width ,this.height);
cliprect.x = 0;
cliprect.y = 0;
cliprect.width = this.textureWidth;
cliprect.height = this.textureHeight;
totalFrames = infoObject.duration * infoObject.fps;
this.hasAlpha = true;
if(infoObject.videocodecid == 5)
this.hasAlpha = true;
this.bitmapData = new BitmapData(this.textureWidth, this.textureHeight, hasAlpha, 0xff000000);
this.video = new Video(this.width, this.height);
this.video.attachNetStream(ns);
this.video.addEventListener(Event.ENTER_FRAME, processPixels);
// processPixel method:
BitmapData.draw(video);
GLAPI.instance.glBindTexture(GLAPI.GL_TEXTURE_2D,this.textureId);
var fmt:uint = GLAPI.GL_ARGB;
// converting pixels using copychannel or loop through pixels
GLAPI.instance.glBindTexture(GLAPI.GL_TEXTURE_2D,this.textureId);
GLAPI.instance.glTexImage2D(GLAPI.GL_TEXTURE_2D, 0, fmt, this.textureWidth, this.textureHeight, 0,fmt, GLAPI.GL_UNSIGNED_BYTE, 0, convBitmapData.getPixels(cliprect));

DB LINK issue using in a Procedure

Hello All, I'm having an issue using DB link in a procedure to collect data into a pl/sql table.
Table1 which is in 10g version being accessed by a DB link and has around 1 million records. Using this link I’m selecting data into another schema DB (which is 11g) into pl/sql table. To my surprise through an anonymous block I can populate data into pl/sql table less than half minute. If i use the same logic by creating a procedure, it takes forever? Is this something to do with the DB versions?
Appreciate your help. Thanks!

In that case you should be using a local table to hold the data.
Create either a permanent local table or a global temporary table and populate it directly from the remote DB:
INSERT /*+ APPEND */ INTO myLocalTable SELECT * FROM remoteTable@dblink
{coded}
Modify your procedure to load the local table and then process the data locally.
The procedure should use SQL whenever possible.

Creat inspection setup entries in quality View using BAPI_MATERIAL_SAVEDAT

Dear all,
I am using BAPI_MATERIAL_SAVEDATA to extend Material from one plant to another.
I am able to extend Quality view to another plant
But unable to create inspection setup entries for the extended view.
Please help.
Regards,
Gaurav sood

Issue Resolved

Issue using BAPI_MATERIAL_SAVEDATA

Similar Messages

Maybe you are looking for