Issue when recordind with cable on the mic track

Hi,
When I record my guitar with a cable (iRig like) directly plug into my amp and my iPad with the mic instrument, I hear on the final recordind the other instrument tracks softly in the background of the new track. How can I do to avoid that ? Is it possible that it comes from a soundcard issue ? I updated GarageBand And iOS, erased and reinstall all but It's still the same... :(
Can someone help me ?

If you're not using headphones, the mic would be picking up sounds from the internal speaker. Even with headphones, if you're close to the iPad it could pick up the sound.
I tried the internal mic with and without crosstalk protection. Either way, I do not get any bleed on my new track when using headphones unless I'm really close to the iPad (and even then it can barely be heard). I'm using earbuds plugged directly into the iPad, not through any iRig type connection.
Of course, I get a lot of bleed when using the iPad speaker to monitor the tracks.
iPad 2, ios 5.1.1, Garageband 1.4

Similar Messages

Timeline issues - when i drag media back, the timeline becomes very large and out of whack! What is this CS4

timeline issues - when i drag media back, the timeline becomes very large and out of whack! What is this in CS4?

You are in the wrong forum!
Premiere Pro CS4 & Earlier

Cap 6: Issue when publish to PDF. The exit button on the skin does not seem to work.

All,
I attemped same using Cap 6: Issue when publish to PDF. The exit button on the skin does not seem to work. I switched out skins and same issue. I am using IE8.
When published as swf, exit button on skin works fine. Any ideas on solve for the PDF version exit button? We would rather publish as PDF since all files are contained in the PDF wrapper.

Hello,
Welcome to Adobe Forums.
This issue is reproducble at my end, need to do some more testing before I can tell you any solution or action plan for this issue
Thank you for your patience.
Regards,
Vikram

The mic volume is too high when calling with an earphone without mic

There are a common problem on the mic volume when calling with my earphone (TF-10 pro without mic). The mic volume seems like turned to speaker mode, so all the background sound has also captured. Therefore, I would like to clarify that it is a common problem or not.

nobody has the same issue with me？

SPA941 issues when used with Road Runner Extreme (Time Warner) 30mb/s down, 5 mb/s up.

I use a SPA941 phone in my home office.
Until recently, my Internet bandwidth was through Time Warner Road Runner Turbo. It generally worked well, but when I happened to be sending a large email or uploading a large file while on the phone, my voice would break up due to the upload bandwidth limitation.
Because of this, I upgraded to Road Runner Extreme (30mb/s download, 5mb/s upload). Now, although speedtest.net tests show that I have good bandwidth and latency, the mute button flashes red at various times througout the day, and at seemingly random times when I'm on the phone, the other party's voice will start to break up and/or cease completely, as though I have a download bandwidth problem... but a quick speedtest.net check shows that not to be the case.
I've spent hours (literally) on the phone with Time Warner 3rd level tech support, and they say everything is fine... and the issue must be with the phone.
I'm using a Ubee DOCSIS 3.0 WLCM combination modem/router
Connected to the SPA941 via cat5 10/100 Ethernet.
Has anyone encountered this problem?
Does anyone have any suggestions?
Are there any settings on the phone that can be adjusted to help in this situation?
Thanks,
David

Hi David,
After reviewing your post I see one important piece of information
"the mute button flashes red at various times througout the day"
Mute button flashing means the ethernet link went down. That would be between the phone and the device the ethernet cable is connected to. The SPA941 is 10mb half duplex device (no pc connection so it didn't need higher capacity).
It could be an auto negotiation issue with the network device. Try forcing the link to 10mb half duplex or daisy chain a 3rd party switch/hub and see if the problem goes away.
One more possibility is IP address DHCP lease renews itself causing the link to go down and up. You can also try setting static IP address with dns & gateway, etc.. into the SPA941.
Randy

How to get around a performance issue when dealing with a lot of data

Hello All,
This is an academic question really, I'm not sure what I'm going to do with my issue, but I have some options. I was wondering if anyone would like to throw in their two cents on what they would do.
I have a report, the users want to see all agreements and all conditions related to the updating of rebates and the affected invoices. From a technical perspective ENT6038-KONV-KONP-KONA-KNA1. THese are the tables I have to hit. The problem is that when they retroactively update rebate conditions they can hit thousands of invoices, which blossoms out to thousands of conditions...you see the problem. I simply have too much data to grab, it times out.
I've tried everything around the code. If you have a better way to get price conditions and agreement numbers off of thousands of invoices, please let me know what that is.
I have a couple of options.
1) Use shared memory to preload the data for the report. This would work, but I'm not going to know what data is needed to be loaded until report run time. They put in a date. I simply can't preload everything. I don't like this option much.
2) Write a function module to do this work. When the user clicks on the button to get this particular data, it will launch the FM in background and e-mail them the results. As you know, the background job won't time out. So far this is my favored option.
Any other ideas?
Oh...nope, BI is not an option, we don't have it. I know, I'm not happy about it. We do have a data warehouse, but the prospect of working with that group makes me whince.

My two cents - firstly totally agree with Derick that its probably a good idea to go back to the business and justify their requirement in regards to reporting and "whether any user can meaningfully process all those results in an aggregate". But having dealt with customers across industries over a long period of time, it would probably be bit fanciful to expect them to change their requirements too much as in my experience neither do they understand (too much) technology nor they want to hear about technical limitations for a system etc. They want what they want if possible yesterday!
So, about dealing with performance issues within ABAP, I'm sure you must be already using efficient programming techniques like using Hash internal tables with Unique Keys, accessing rows of the table using Field-Symbols and all that but what I was going to suggest to you is probably look at using [Extracts|http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9ed135c111d1829f0000e829fbfe/content.htm]. I've had to deal with this couple of times in the past when dealing with massive amount of data and I found it to be very efficient in regards to performance. A good point to remember when using Extracts that, I quote from SAP Help, "The size of an extract dataset is, in principle, unlimited. Extracts larger than 500KB are stored in operating system files. The practical size of an extract is up to 2GB, as long as there is enough space in the filesystem."
Hope this helps,
Cheers,
Sougata.

Adobe Bridge permission issues when working with network account

We have some users using Adobe Bridge CS3, CS4 and CS5.
They are using Bridge to browse arround the file server.
I have ACL's so the users can have full access using the Finder, deleting, making folders etc.
Users are logged in to their AD account with their home folder synced to a Mac OS X server 10.6.4.
Unless they are Posix owner of a folder they can't make changes or nothing using Bridge.
If they log in to a local account on a Mac and then manually connect to a share on the same server all is fine with Bridge. They can make folders, delete files etc etc.
Any ideas?
I know Adobe made it easy for themselfs years ago by simply stating it is not supported to work on a server using any Adobe app.

jhellstrom wrote:
We have some users using Adobe Bridge CS3, CS4 and CS5.
They are using Bridge to browse arround the file server.
I have ACL's so the users can have full access using the Finder, deleting, making folders etc.
Users are logged in to their AD account with their home folder synced to a Mac OS X server 10.6.4.
Unless they are Posix owner of a folder they can't make changes or nothing using Bridge.
If they log in to a local account on a Mac and then manually connect to a share on the same server all is fine with Bridge. They can make folders, delete files etc etc.
Any ideas?
I know Adobe made it easy for themselfs years ago by simply stating it is not supported to work on a server using any Adobe app.
As you said Adobe washed their hands of the matter and as any business customer is almost certainly going to use a server, and as Adobe products are so expensive pretty much only business customers can afford them, this is totally inexcusable.
I had a similar network login related problem with Acrobat Pro in version 7.0 which after +two years+ (no exaggeration) was eventually fixed in Acrobat Pro 8.1. Unfortunately it was then broken again in Acrobat Pro 9.0. Based on my experiences with Acrobat Pro and due to a totally different reason (nothing to to do with using Adobe SW) I found that when I switched from using AFP for network home directories to instead using NFS, my problems with Adobe software and network login accounts went away.
So, it might be worth your thinking about switching to using NFS for home directories as a workaround.
Adobe have become even worse than Microsoft for their software. They use a variety of sucky installers instead of Apple's free Installer (Microsoft have switched to using Apple's Installer), they use product activation, they are even worse than MS Office at working with servers. The only redeeming fact Adobe has is that their Mac and Windows products are mostly equivalent unlike Microsoft who still cripple their Mac software.

Attaching an iPhone with cable to the computer w/o syncing iPhone

Is it possible to attach an iPhone with cable to computer without syncing the iPhone with iTunes? My iphone is already known at my computer, so I don't my computer to change my song list in my iPhone? This situation might seem silly, but I just don't want it happen

In iTunes go to Edit>Preferences>Devices and turn off the auto-sync

Problem with Ai when working with a logo (the program gets slow & I can´t move the logo easily)

Hi there, Hope everyone is well. I have troubles with my Ai when working with a logo, I just want to move it from one point to another and it gets pretty slow to be moved. I am working on a brand new iMac and this problem surprises me a little bit. Do you know why is this happening? I get de Ai from the Creative Cloud...could it be the internet?

Can you please show a screenshot?
Are there any placed raster images in your file? Are there any raster effects in your logo file? What are your Effect > Document Raster Effects Settings... ? Also, what are your Preferences > Scratch Disks settings, and how much free space do you have on that (those) drive(s)?
I doubt it's the internet, unless you're also synching at the same time ... and while this is taking place your internet connection is super-slow.

ITunes doesn't find Airtunes when connected with cable, only WiFi

I have an Apple TV with Airtunes enabled. But apparantly, it's not possible to connect to it from PC's who are connected to LAN with cable instead of WiFI? Does anyone know why?
More details:
I have 3 PC's:
PC 1: , Windows 7 64-bit with iTunes 9.1.1.12 (latest)
Stationary, connected to LAN using cable in a Gigabit switch
PC 2: 100% fresh install of Windows 7 32-bit and iTunes 9.1.1.12
Stationary, connected to LAN using cable in a Gigabit switch
PC 3: Win 7 32-bit with iTunes 9.1.1.12
Netbook - connected through WiFi
Apple TV device (latest firmware) is connected to same LAN using cable as well. *All PC's can ping the Apple TV without problems.*
So the problem is that iTunes doesn't find the Airtunes device (the output dropdown selector doesn't show up). I first tried on my main PC (PC1). It didn't work, so i tested on PC2 (wich is a fresh install of both OS and iTunes!), but same problem there.
But then the weird thing happened. I tried to install on my netbook, and it worked! Only difference is that the netbook was connected through WiFi. I don't see why that would matter, but just for fun i tested to disconnect WiFi, and connect with cable and boom - airtunes selection dissappeared! As soon as I disconnected the cable and reconnected WiFi, it appeared again.
Why on earth would Airtunes only work on WiFi? As you can see on this screenshot, network configuration is equal on Wifi and cabled connection. (Apple TV has IP 10.0.1.30)

It's supposed to be able to cope with slightly different file & folder structures, missing track numbers, all tracks in just an artist folder, everything in Unknown Artist\Unknown Album etc. Details here. Can you give me an idea of how things are set out? Maybe it needs a little tweak to cope with the way you've done things, or we could use something like MediaMonkey to reorganize what you have into something the script can work with.
I'm going to be out for much of the day but I'll look in on this thread later.
tt2

I have had my Ipad for approx 4 years. When working with an app, the screen will go black and then back to the home page.

I have had a IPad for 4 years, for several months when working with apps, the screen will go black and then return to the home page

Hi sjeure,
Thanks for using Apple Support Communities. I would recommend restarting and resetting your device to see if the unexpected app closing still happens:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
- Ari

Monotron issue when interfacing with logic

I have just bought a Korg Monotron and I have connected it to my audio interface and tried to record into Logic.
However, I hear no sound coming out of the Monotron.
I have used a 3.5mm stereo plug to 6.3mm stereo socket in the headphone output of the Monotron.
Can anyone please confirm why I am experiencing this issue?
Cheers,
Mr Rock

Hi Jazz,
The problem is solved- I was using a 'guitar lead' (which I understand is mono) to connect to the stereo adaptor so I guess this is where the problem was.
Thanks for your help.
Best,
Mr Rock

When I import my footage, the audio track disappears!

I have footage taken with my Canon vixia hfs11. Footage looks great. However, when I import the footage into Premeire Pro CS6, the audio track disappears. I have used the Media Browser to import and import under file. Nothing works. The file is a MTS. Please help!

As Karsten Schlüter, says MPEG Streamclip is a great way to make sure the video is as compatible as possible. You can also try downloading to multimedia helpers like DivX (in the case of some Xvid/Divx MP4 formats). I have a Flip mino video camera that requires DivX to be installed to play them back. And once I installed it the videos would be editable in iMovie '11. Something to try.

Anyone else get screwed by a sales rep when dealing with changing to the edge plan? I just got screwed and want to know if anyone else has had issues.

I am looking to change service after dealing with an idiot at my local store that totally misrepresented the plan and is costing me more than ever to have phone service.

Me and my fiance were both conned into the edge plan after the idiot rep
lied to us about not saving money by merging our accounts. Then we find
out that we can't merge because of the edge plan we have. I am writing
letters and posting messages to find or if this has happened you anyone
else. No one has been able to help us so my main focus us to inform as
many people as possible about what happened
On Aug 15, 2014 9:20 PM, "Verizon Wireless Customer Support" <

Formatting issues: when I open a msg, the font is sooo small you need a magnifier to read it. How can I set the font size to one I can easily read?

== Issue
==
I have another kind of problem with Firefox
== Description
==
I have various formatting issues:
a. When I open a msg from my web browser (Cablevision), the font is sooo small I need a magnifier to read it. How can I set the font to a size I can easily read?
b. When I forward msgs, the text gets all distorted and I need to clean it up (some symbols, lots of spaces between words). How can this be fixed?
c. When I want to tell someone about a website, I cannot type the URL in so that all they have to do is click on it. How can this be fixed?
d. When I open messages, the text opens in a small window and covers the "Show Images" button. Why?
== This happened
==
Every time Firefox opened
== Ever since I started using Firefox (a few months ago)
==
'''Troubleshooting information'''
I didn't find any results
== Firefox version
==
3.6.3
== Operating system
==
Windows 7
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
== Plugins installed
==
*-nphpclipbook
*Office Plugin for Netscape Navigator
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*The Hulu Desktop Plugin allows Hulu.com to integrate with the Hulu Desktop application.
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*3.0.40624.0
*NPWLPG
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

The text editor is the text area that you use on the webmail (Yahoo, Hotmail) website to create a new mail.
You can compare that with the ''Post new message'' text area that you use to create a new post on this forum.
Just above the text area that you use to enter the message text there is usually a button bar with buttons that allows some text formatting like Bold and Italic and can also include a button to make a clickable hyperlink.
Check the tooltip of each button by hovering with the mouse over each button.
Make Link - https://addons.mozilla.org/firefox/addon/142

Issue when recordind with cable on the mic track

Similar Messages

Maybe you are looking for