Issue when using broadcaster in query desinger
Hi All,
we are having issues when we try to either distribute workbooks, it comes with a workbook page but nothing shows up on the page,samething when I try from
query designer and try to publish it using broadcaster,the page does not show up anything.I am not sure why is it doing that.It was working before where it asked me onnce i distributed a workbook to make a new setting to broadcast the workbook.
Your answere are greatly appreciated and will assign maximum points if it is solved.
Regards
Abyie
Hi Gurus,
I was able to sucessfully configure the Launch_Broadcaster. Now the broadcast settings in web template work same as the one when we launch the query to web from query designer(SEND, button function). However the broadcaster in web template(WAD) does not have XML(Ms Excel) output format. It has only MHTML, HTML, PDF & Online Link to Current Data.
Is there a setting we need to perform in order to have XML(Excel) output format in WAD reports. Please advise.
Thanks Much!
Similar Messages
-
Performance issue when using the same query in a different way
Hello,
I have a performance problem with the statement below when running it with an insert or with execute immediate.
n.b.: This statement could be more optimized, but it is a generated statement.
When I run this statement I get one row back within one second, so there is no performance problem.
select sysdate
,5
,'testje'
,count (1)
,'NL' groupby
from (select 'different (target)' compare_type
,t.id_org_addr id_org_addr -- ID_ORG_ADDR
,t.vpd_country vpd_country -- CTL_COUNTRY
,t.addr_type addr_type -- ADDRESSTYP_COD
from (select *
from (select t.*
from ods.ods_org_addr t
left outer join
m_sy_foreign_key m
on m.vpd_country = t.vpd_country
and m.key_type = 'ORGADDR2'
and m.target_value = t.id_org_addr
where coalesce (t.end_date, to_date ('99991231', 'yyyymmdd')) >= sysdate) /*SGRB*/
where vpd_country = 'NL' /*EGRB*/
) t
where exists
(select null
from (select *
from (select m.target_value id_org_addr
,s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod id_cegedim
,s.*
from okc_mdl_workplace_address s
left outer join
m_sy_foreign_key m
on m.vpd_country = s.ctl_country
and m.key_type = 'ORGADDR2'
and m.source_value = s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod
where coalesce (s.end_val_dat, to_date ('99991231', 'yyyymmdd')) >= sysdate) /*SGRB*/
where ctl_country = 'NL' /*EGRB*/
) s
where t.id_org_addr = s.id_org_addr)
minus
select 'different (target)' compare_type
,s.id_org_addr id_org_addr -- ID_ORG_ADDR
,s.ctl_country vpd_country -- CTL_COUNTRY
, (select to_number (l.target_value)
from okc_code_foreign l
where l.source_code_type = 'TYS'
and l.target_code_type = 'ADDRLINKTYPE'
and l.source_value = upper (s.addresstyp_cod)
and l.vpd_country = s.ctl_country)
addr_type -- ADDRESSTYP_COD
from (select *
from (select m.target_value id_org_addr
,s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod id_cegedim
,s.*
from okc_mdl_workplace_address s
left outer join
m_sy_foreign_key m
on m.vpd_country = s.ctl_country
and m.key_type = 'ORGADDR2'
and m.source_value = s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod
where coalesce (s.end_val_dat, to_date ('99991231', 'yyyymmdd')) >= sysdate) /*SGRB*/
where ctl_country = 'NL' /*EGRB*/
) s) When I run this statement using a insert by placing
insert into okc_compare_results (
datetime
,compare_tables_id
,compare_target
,record_count
,groupby
) before the statement, then the statement runs about *3 to 4 minutes*, The same is happening when running the select part only using execute immediate.
Below the execution plans of the insert with the select and the select only.
Could somebody tell me what causes the different behavior of the "same" statement and what could I do to avoid this behavior.
The database version is: 11.1.0.7.0
Regards,
Fred.
SQL Statement which produced this data:
select * from table(dbms_xplan.display_cursor ('cuk3uwnxx344q',0 /*3431532430 */))
union all
select * from table(dbms_xplan.display_cursor ('862aq599gfd6n',0/*3531428851 */))
plan_table_output
SQL_ID cuk3uwnxx344q, child number 0
select sysdate ,:"SYS_B_00" ,:"SYS_B_01"
,count (:"SYS_B_02") ,:"SYS_B_03" groupby from ( (select
:"SYS_B_04" compare_type ,t.id_org_addr id_org_addr
-- ID_ORG_ADDR ,t.vpd_country vpd_country --
CTL_COUNTRY ,t.addr_type addr_type -- ADDRESSTYP_COD
from (select * from (select t.*
from ods.ods_org_addr t
left outer join
m_sy_foreign_key m on
m.vpd_country = t.vpd_country ; and
m.key_type = :"SYS_B_05" and
m.target_value = t.id_org_addr ; where
coalesce (t.end_date, to_date (:"SYS_B_06", :"SYS_B_07")) >= sysdate)
/*SGRB*/ where vpd_country = :"SYS_B_08" /*EGRB*/
Plan hash value: 3431532430
Id Operation Name Rows Bytes Cost (%CPU) Time Pstart Pstop
0 SELECT STATEMENT 1772 (100)
1 SORT AGGREGATE 1
2 VIEW 3 1772 (1) 00:00:22
3 MINUS
4 SORT UNIQUE 3 492 1146 (1) 00:00:14
* 5 HASH JOIN OUTER 3 492 1145 (1) 00:00:14
6 NESTED LOOPS
7 NESTED LOOPS 3 408 675 (1) 00:00:09
* 8 HASH JOIN 42 4242 625 (1) 00:00:08
9 PARTITION LIST SINGLE 3375 148K 155 (2) 00:00:02 KEY KEY
* 10 TABLE ACCESS FULL OKC_MDL_WORKPLACE_ADDRESS 3375 148K 155 (2) 00:00:02 KEY KEY
* 11 INDEX RANGE SCAN PK_M_SY_FOREIGN_KEY 49537 2709K 469 (1) 00:00:06
* 12 INDEX UNIQUE SCAN UK_ODS_ORG_ADDR 1 1 (0) 00:00:01
* 13 TABLE ACCESS BY GLOBAL INDEX ROWID ODS_ORG_ADDR 1 35 2 (0) 00:00:01 ROWID ROWID
* 14 INDEX RANGE SCAN PK_M_SY_FOREIGN_KEY 49537 1354K 469 (1) 00:00:06
15 NESTED LOOPS
16 NESTED LOOPS 1 67 9 (12) 00:00:01
17 NESTED LOOPS 1 48 8 (13) 00:00:01
* 18 HASH JOIN 1 23 6 (17) 00:00:01
* 19 TABLE ACCESS BY GLOBAL INDEX ROWID ODS_COUNTRY_SYSTEM 1 11 2 (0) 00:00:01 ROWID ROWID
* 20 INDEX RANGE SCAN PK_ODS_DIVISION_SYSTEM 1 1 (0) 00:00:01
* 21 TABLE ACCESS FULL SY_SOURCE_CODE 8 96 3 (0) 00:00:01
22 TABLE ACCESS BY INDEX ROWID SY_FOREIGN_CODE 1 25 2 (0) 00:00:01
* 23 INDEX RANGE SCAN PK_SY_FOREIGN_CODE 1 1 (0) 00:00:01
* 24 INDEX UNIQUE SCAN PK_SY_TARGET_CODE 1 0 (0)
* 25 TABLE ACCESS BY INDEX ROWID SY_TARGET_CODE 1 19 1 (0) 00:00:01
26 SORT UNIQUE 3375 332K 626 (1) 00:00:08
* 27 HASH JOIN OUTER 3375 332K 625 (1) 00:00:08
28 PARTITION LIST SINGLE 3375 148K 155 (2) 00:00:02 KEY KEY
* 29 TABLE ACCESS FULL OKC_MDL_WORKPLACE_ADDRESS 3375 148K 155 (2) 00:00:02 KEY KEY
* 30 INDEX RANGE SCAN PK_M_SY_FOREIGN_KEY 49537 2709K 469 (1) 00:00:06
Predicate Information (identified by operation id):
5 - access("M"."TARGET_VALUE"="T"."ID_ORG_ADDR" AND "M"."VPD_COUNTRY"="T"."VPD_COUNTRY")
8 - access("M"."SOURCE_VALUE"="S"."WKP_ID_CEGEDIM" :SYS_B_12 S."ADR_ID_CEGEDIM" :SYS_B_13 S."ADDRESSTYP_COD" AND
"M"."VPD_COUNTRY"="S"."CTL_COUNTRY")
10 - filter(COALESCE("S"."END_VAL_DAT",TO_DATE(:SYS_B_14,:SYS_B_15))>=SYSDATE@!)
11 - access("M"."KEY_TYPE"=:SYS_B_11 AND "M"."VPD_COUNTRY"=:SYS_B_16)
12 - access("T"."ID_ORG_ADDR"="M"."TARGET_VALUE")
13 - filter(("T"."VPD_COUNTRY"=:SYS_B_08 AND COALESCE("T"."END_DATE",TO_DATE(:SYS_B_06,:SYS_B_07))>=SYSDATE@!))
14 - access("M"."KEY_TYPE"=:SYS_B_05 AND "M"."VPD_COUNTRY"=:SYS_B_08)
18 - access("CS"."ID_SYSTEM"="SK"."ID_SOURCE_SYSTEM")
19 - filter("CS"."SYSTEM_TYPE"=1)
20 - access("CS"."VPD_COUNTRY"=:B1 AND "CS"."EXP_IMP_TYPE"='I')
filter("CS"."EXP_IMP_TYPE"='I')
21 - filter("SK"."CODE_TYPE"=:SYS_B_18)
23 - access("FK"."ID_SOURCE_CODE"="SK"."ID_SOURCE_CODE" AND "FK"."SOURCE_VALUE"=UPPER(:B1) AND
"CS"."VPD_COUNTRY"="FK"."VPD_COUNTRY")
filter(("FK"."VPD_COUNTRY"=:B1 AND "FK"."SOURCE_VALUE"=UPPER(:B2) AND "CS"."VPD_COUNTRY"="FK"."VPD_COUNTRY"))
24 - access("FK"."ID_TARGET_CODE"="TK"."ID_TARGET_CODE")
25 - filter("TK"."CODE_TYPE"=:SYS_B_19)
27 - access("M"."SOURCE_VALUE"="S"."WKP_ID_CEGEDIM" :SYS_B_23 S."ADR_ID_CEGEDIM" :SYS_B_24 S."ADDRESSTYP_COD" AND
"M"."VPD_COUNTRY"="S"."CTL_COUNTRY")
29 - filter(COALESCE("S"."END_VAL_DAT",TO_DATE(:SYS_B_25,:SYS_B_26))>=SYSDATE@!)
30 - access("M"."KEY_TYPE"=:SYS_B_22 AND "M"."VPD_COUNTRY"=:SYS_B_27)
SQL_ID 862aq599gfd6n, child number 0
insert into okc_compare_results ( datetime
,compare_tables_id ,compare_target
,record_count ,groupby )
select sysdate ,:"SYS_B_00" ,:"SYS_B_01"
,count (:"SYS_B_02") ,:"SYS_B_03" groupby from ( (select
:"SYS_B_04" compare_type ,t.id_org_addr id_org_addr
-- ID_ORG_ADDR ,t.vpd_country vpd_country --
CTL_COUNTRY ,t.addr_type addr_type -- ADDRESSTYP_COD
from (select * from (select t.*
from ods.ods_org_addr t
left outer join
m_sy_foreign_key m on
m.vpd_country = t.vpd_country ; and
m.key_type = :"SYS_B_05" and
m.target_value = t.id_org_addr
Plan hash value: 3531428851
Id Operation Name Rows Bytes Cost (%CPU) Time Pstart Pstop
0 INSERT STATEMENT 1646 (100)
1 LOAD TABLE CONVENTIONAL
2 SORT AGGREGATE 1
3 VIEW 1 1646 (1) 00:00:20
4 MINUS
5 SORT UNIQUE 1 163
6 NESTED LOOPS OUTER 1 163 1067 (1) 00:00:13
7 NESTED LOOPS 1 135 599 (1) 00:00:08
* 8 HASH JOIN 19 1919 577 (2) 00:00:07
9 PARTITION LIST SINGLE 1535 69075 107 (4) 00:00:02 KEY KEY
* 10 TABLE ACCESS FULL OKC_MDL_WORKPLACE_ADDRESS 1535 69075 107 (4) 00:00:02 KEY KEY
* 11 INDEX RANGE SCAN PK_M_SY_FOREIGN_KEY 49537 2709K 469 (1) 00:00:06
* 12 TABLE ACCESS BY GLOBAL INDEX ROWID ODS_ORG_ADDR 1 34 2 (0) 00:00:01 ROWID ROWID
* 13 INDEX UNIQUE SCAN UK_ODS_ORG_ADDR 25 1 (0) 00:00:01
* 14 INDEX RANGE SCAN PK_M_SY_FOREIGN_KEY 1 28 468 (1) 00:00:06
15 NESTED LOOPS
16 NESTED LOOPS 1 67 8 (0) 00:00:01
17 NESTED LOOPS 1 48 7 (0) 00:00:01
18 NESTED LOOPS 1 23 5 (0) 00:00:01
* 19 TABLE ACCESS BY GLOBAL INDEX ROWID ODS_COUNTRY_SYSTEM 1 11 2 (0) 00:00:01 ROWID ROWID
* 20 INDEX RANGE SCAN PK_ODS_DIVISION_SYSTEM 1 1 (0) 00:00:01
* 21 TABLE ACCESS FULL SY_SOURCE_CODE 1 12 3 (0) 00:00:01
22 TABLE ACCESS BY INDEX ROWID SY_FOREIGN_CODE 1 25 2 (0) 00:00:01
* 23 INDEX RANGE SCAN PK_SY_FOREIGN_CODE 1 1 (0) 00:00:01
* 24 INDEX UNIQUE SCAN PK_SY_TARGET_CODE 1 0 (0)
* 25 TABLE ACCESS BY INDEX ROWID SY_TARGET_CODE 1 19 1 (0) 00:00:01
26 SORT UNIQUE 1535 151K
* 27 HASH JOIN OUTER 1535 151K 577 (2) 00:00:07
28 PARTITION LIST SINGLE 1535 69075 107 (4) 00:00:02 KEY KEY
* 29 TABLE ACCESS FULL OKC_MDL_WORKPLACE_ADDRESS 1535 69075 107 (4) 00:00:02 KEY KEY
* 30 INDEX RANGE SCAN PK_M_SY_FOREIGN_KEY 49537 2709K 469 (1) 00:00:06
Predicate Information (identified by operation id):
8 - access("M"."SOURCE_VALUE"="S"."WKP_ID_CEGEDIM" :SYS_B_12 S."ADR_ID_CEGEDIM" :SYS_B_13 S."ADDRESSTYP_COD" AND
"M"."VPD_COUNTRY"="S"."CTL_COUNTRY")
10 - filter(COALESCE("S"."END_VAL_DAT",TO_DATE(:SYS_B_14,:SYS_B_15))>=SYSDATE@!)
11 - access("M"."KEY_TYPE"=:SYS_B_11 AND "M"."VPD_COUNTRY"=:SYS_B_16)
12 - filter((COALESCE("T"."END_DATE",TO_DATE(:SYS_B_06,:SYS_B_07))>=SYSDATE@! AND "T"."VPD_COUNTRY"=:SYS_B_08))
13 - access("T"."ID_ORG_ADDR"="M"."TARGET_VALUE")
14 - access("M"."KEY_TYPE"=:SYS_B_05 AND "M"."VPD_COUNTRY"=:SYS_B_08 AND "M"."TARGET_VALUE"="T"."ID_ORG_ADDR")
filter("M"."TARGET_VALUE"="T"."ID_ORG_ADDR")
19 - filter("CS"."SYSTEM_TYPE"=1)
20 - access("CS"."VPD_COUNTRY"=:B1 AND "CS"."EXP_IMP_TYPE"='I')
filter("CS"."EXP_IMP_TYPE"='I')
21 - filter(("SK"."CODE_TYPE"=:SYS_B_18 AND "CS"."ID_SYSTEM"="SK"."ID_SOURCE_SYSTEM"))
23 - access("FK"."ID_SOURCE_CODE"="SK"."ID_SOURCE_CODE" AND "FK"."SOURCE_VALUE"=UPPER(:B1) AND
"CS"."VPD_COUNTRY"="FK"."VPD_COUNTRY")
filter(("FK"."VPD_COUNTRY"=:B1 AND "FK"."SOURCE_VALUE"=UPPER(:B2) AND "CS"."VPD_COUNTRY"="FK"."VPD_COUNTRY"))
24 - access("FK"."ID_TARGET_CODE"="TK"."ID_TARGET_CODE")
25 - filter("TK"."CODE_TYPE"=:SYS_B_19)
27 - access("M"."SOURCE_VALUE"="S"."WKP_ID_CEGEDIM" :SYS_B_23 S."ADR_ID_CEGEDIM" :SYS_B_24 S."ADDRESSTYP_COD" AND
"M"."VPD_COUNTRY"="S"."CTL_COUNTRY")
29 - filter(COALESCE("S"."END_VAL_DAT",TO_DATE(:SYS_B_25,:SYS_B_26))>=SYSDATE@!)
30 - access("M"."KEY_TYPE"=:SYS_B_22 AND "M"."VPD_COUNTRY"=:SYS_B_27)Edited by: BluShadow on 20-Jun-2012 10:30
added {noformat}{noformat} tags for readability. Please read {message:id=9360002} and learn to do this yourself.yes, all the used tables are analyzed.
Thanks, for pointing to the metalink bug, I have also searched in metalink, but didn't find this bug.
I have a little bit more information about the problem.
I use the following select (now in a readable format)
select count (1)
from ( (select 'different (target)' compare_type
,t.id_org_addr id_org_addr -- ID_ORG_ADDR
,t.vpd_country vpd_country -- CTL_COUNTRY
,t.addr_type addr_type -- ADDRESSTYP_COD
from (select *
from (select t.*
from ods.ods_org_addr t
left outer join
m_sy_foreign_key m
on m.vpd_country = t.vpd_country
and m.key_type = 'ORGADDR2'
and m.target_value = t.id_org_addr
where coalesce (t.end_date, to_date ('99991231', 'yyyymmdd')) >= sysdate) /*SGRB*/
where vpd_country = 'NL' /*EGRB*/
) t
where exists
(select null
from (select *
from (select m.target_value id_org_addr
,s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod id_cegedim
,s.*
from okc_mdl_workplace_address s
left outer join
m_sy_foreign_key m
on m.vpd_country = s.ctl_country
and m.key_type = 'ORGADDR2'
and m.source_value = s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod
where coalesce (s.end_val_dat, to_date ('99991231', 'yyyymmdd')) >= sysdate) /*SGRB*/
where ctl_country = 'NL' /*EGRB*/
) s
where t.id_org_addr = s.id_org_addr)
minus
select 'different (target)' compare_type
,s.id_org_addr id_org_addr -- ID_ORG_ADDR
,s.ctl_country vpd_country -- CTL_COUNTRY
, (select to_number (l.target_value)
from okc_code_foreign l
where l.source_code_type = 'TYS'
and l.target_code_type = 'ADDRLINKTYPE'
and l.source_value = upper (s.addresstyp_cod)
and l.vpd_country = s.ctl_country)
addr_type -- ADDRESSTYP_COD
from (select *
from (select m.target_value id_org_addr
,s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod id_cegedim
,s.*
from okc_mdl_workplace_address s
left outer join
m_sy_foreign_key m
on m.vpd_country = s.ctl_country
and m.key_type = 'ORGADDR2'
and m.source_value = s.wkp_id_cegedim || '-' || s.adr_id_cegedim || '-' || s.addresstyp_cod
where coalesce (s.end_val_dat, to_date ('99991231', 'yyyymmdd')) >= sysdate) /*SGRB*/
where ctl_country = 'NL' /*EGRB*/
) s)) The select is executed in 813 msecs
When I execute the same select using execute immediate like:
declare
ln_count number;
begin
execute immediate q'[<select statement>]' into ln_count;
end;This takes 3:56 minutes to complete.
When I change the second coalesce part (the one within the exists) in the flowing way:
the part
coalesce (s.end_val_dat, to_date ('99991231', 'yyyymmdd')) >= sysdate
is replaced by
s.end_val_dat >= sysdate or s.end_val_dat is nullthen the execution time is even faster (560 msecs) in both, the plain select and the select using the execute immediate. -
When using BW Bex query analyzer users cannot change reporting queries ....
Issue: When using BW Bex query analyzer users cannot change reporting queries. Any attempt to change queries results in errors.
Error: BEx Query Designer: Run-time error '-2147221499 (80040005) Fatal Error - Terminating
Impact: Business reporting is currently being negatively impacted because users cannot modify queries, cannot change filters for fiscal period and fiscal year.
OS / MS Office Suite being used: Vista & Office 2007
Backend System: BW 2.0B
Frontend System: Being a large organization, we have a controlled environment wherein all users will have the following applications installed by default:
1. SAP Client Base 7.10
2. SAP BW 3.5 Patch 4
3. SAP BI 7.10 Patch 900
4. SAP GUI 7.10 Patch 12
Does anyone has any idea as to why we are getting this error? Is it a Vista issue? Is it a front-end issue?Just a thought - did you guys apply any Microsoft security patches before this started happening - we had a similar issue in other SAP application due to MS security update. Raise an OSS with SAP
-
Performance issues when creating a Report / Query in Discoverer
Hi forum,
Hope you are can help, it involves a performance issues when creating a Report / Query.
I have a Discoverer Report that currently takes less than 5 seconds to run. After I add a condition to bring back Batch Status that = Posted we cancelled the query after reaching 20 minutes as this is way too long. If I remove the condition the query time goes back to less than 5 seconds.
Please see attached the SQL Inspector Plan:
Before Condition
SELECT STATEMENT
SORT GROUP BY
VIEW SYS
SORT GROUP BY
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
TABLE ACCESS BY INDEX ROWID GL.GL_CODE_COMBINATIONS
AND-EQUAL
INDEX RANGE SCAN GL.GL_CODE_COMBINATIONS_N2
INDEX RANGE SCAN GL.GL_CODE_COMBINATIONS_N1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUES_N1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUE_SETS
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUE_SETS_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES_TL
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUES_TL_U1
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUE_NORM_HIER_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_LINES
INDEX RANGE SCAN GL.GL_JE_LINES_N1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
TABLE ACCESS BY INDEX ROWID GL.GL_JE_HEADERS
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_DAILY_CONVERSION_TYPES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_SOURCES_TL
INDEX UNIQUE SCAN GL.GL_JE_SOURCES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_CATEGORIES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
INDEX UNIQUE SCAN GL.GL_BUDGET_VERSIONS_U1
INDEX UNIQUE SCAN GL.GL_ENCUMBRANCE_TYPES_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
TABLE ACCESS BY INDEX ROWID GL.GL_JE_BATCHES
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_PERIODS
INDEX RANGE SCAN GL.GL_PERIODS_U1
After Condition
SELECT STATEMENT
SORT GROUP BY
VIEW SYS
SORT GROUP BY
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
TABLE ACCESS FULL GL.GL_JE_BATCHES
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_HEADERS
INDEX RANGE SCAN GL.GL_JE_HEADERS_N1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
INDEX UNIQUE SCAN GL.GL_ENCUMBRANCE_TYPES_U1
INDEX UNIQUE SCAN GL.GL_DAILY_CONVERSION_TYPES_U1
INDEX UNIQUE SCAN GL.GL_BUDGET_VERSIONS_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_SOURCES_TL
INDEX UNIQUE SCAN GL.GL_JE_SOURCES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_CATEGORIES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_LINES
INDEX RANGE SCAN GL.GL_JE_LINES_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
TABLE ACCESS BY INDEX ROWID GL.GL_CODE_COMBINATIONS
INDEX UNIQUE SCAN GL.GL_CODE_COMBINATIONS_U1
TABLE ACCESS BY INDEX ROWID GL.GL_PERIODS
INDEX RANGE SCAN GL.GL_PERIODS_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUES_N1
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUE_NORM_HIER_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES_TL
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUES_TL_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUE_SETS
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUE_SETS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
Is there anything i can do in Discoverer Desktop / Administration to avoid this problem.
Many thanks,
LanceHi Rod,
I've tried the condition (Batch Status||'' = 'Posted') as you suggested, but the qeury time is still over 20 mins. To test i changed it to (Batch Status||'' = 'Unposted') and the query was returned within seconds again.
Ive been doing some more digging and have found the database view that is linked to the Journal Batches folder. See below.
I think the problem is with the column using DECODE. When querying the column in TOAD the value of P is returned. But in discoverer the condition is done on the value Posted. Im not too sure how DECODE works, but think this could be the causing some sort of issue with Full Table Scans. How do we get around this?
Lance
DECODE( JOURNAL_BATCH1.STATUS,
'+', 'Unable to validate or create CTA',
'+*', 'Was unable to validate or create CTA',
'-','Invalid or inactive rounding differences account in journal entry',
'-*', 'Modified invalid or inactive rounding differences account in journal entry',
'<', 'Showing sequence assignment failure',
'<*', 'Was showing sequence assignment failure',
'>', 'Showing cutoff rule violation',
'>*', 'Was showing cutoff rule violation',
'A', 'Journal batch failed funds reservation',
'A*', 'Journal batch previously failed funds reservation',
'AU', 'Showing batch with unopened period',
'B', 'Showing batch control total violation',
'B*', 'Was showing batch control total violation',
'BF', 'Showing batch with frozen or inactive budget',
'BU', 'Showing batch with unopened budget year',
'C', 'Showing unopened reporting period',
'C*', 'Was showing unopened reporting period',
'D', 'Selected for posting to an unopened period',
'D*', 'Was selected for posting to an unopened period',
'E', 'Showing no journal entries for this batch',
'E*', 'Was showing no journal entries for this batch',
'EU', 'Showing batch with unopened encumbrance year',
'F', 'Showing unopened reporting encumbrance year',
'F*', 'Was showing unopened reporting encumbrance year',
'G', 'Showing journal entry with invalid or inactive suspense account',
'G*', 'Was showing journal entry with invalid or inactive suspense account',
'H', 'Showing encumbrance journal entry with invalid or inactive reserve account',
'H*', 'Was showing encumbrance journal entry with invalid or inactive reserve account',
'I', 'In the process of being posted',
'J', 'Showing journal control total violation',
'J*', 'Was showing journal control total violation',
'K', 'Showing unbalanced intercompany journal entry',
'K*', 'Was showing unbalanced intercompany journal entry',
'L', 'Showing unbalanced journal entry by account category',
'L*', 'Was showing unbalanced journal entry by account category',
'M', 'Showing multiple problems preventing posting of batch',
'M*', 'Was showing multiple problems preventing posting of batch',
'N', 'Journal produced error during intercompany balance processing',
'N*', 'Journal produced error during intercompany balance processing',
'O', 'Unable to convert amounts into reporting currency',
'O*', 'Was unable to convert amounts into reporting currency',
'P', 'Posted',
'Q', 'Showing untaxed journal entry',
'Q*', 'Was showing untaxed journal entry',
'R', 'Showing unbalanced encumbrance entry without reserve account',
'R*', 'Was showing unbalanced encumbrance entry without reserve account',
'S', 'Already selected for posting',
'T', 'Showing invalid period and conversion information for this batch',
'T*', 'Was showing invalid period and conversion information for this batch',
'U', 'Unposted',
'V', 'Journal batch is unapproved',
'V*', 'Journal batch was unapproved',
'W', 'Showing an encumbrance journal entry with no encumbrance type',
'W*', 'Was showing an encumbrance journal entry with no encumbrance type',
'X', 'Showing an unbalanced journal entry but suspense not allowed',
'X*', 'Was showing an unbalanced journal entry but suspense not allowed',
'Z', 'Showing invalid journal entry lines or no journal entry lines',
'Z*', 'Was showing invalid journal entry lines or no journal entry lines', NULL ), -
JTable text alignment issues when using JPanel as custom TableCellRenderer
Hi there,
I'm having some difficulty with text alignment/border issues when using a custom TableCellRenderer. I'm using a JPanel with GroupLayout (although I've also tried others like FlowLayout), and I can't seem to get label text within the JPanel to align properly with the other cells in the table. The text inside my 'panel' cell is shifted downward. If I use the code from the DefaultTableCellRenderer to set the border when the cell receives focus, the problem gets worse as the text shifts when the new border is applied to the panel upon cell selection. Here's an SSCCE to demonstrate:
import java.awt.Color;
import java.awt.Component;
import java.awt.EventQueue;
import javax.swing.GroupLayout;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JTable;
import javax.swing.border.Border;
import javax.swing.table.TableCellRenderer;
import javax.swing.table.TableColumn;
import sun.swing.DefaultLookup;
public class TableCellPanelTest extends JFrame {
private class PanelRenderer extends JPanel implements TableCellRenderer {
private JLabel label = new JLabel();
public PanelRenderer() {
GroupLayout layout = new GroupLayout(this);
layout.setHorizontalGroup(layout.createParallelGroup().addComponent(label));
layout.setVerticalGroup(layout.createParallelGroup().addComponent(label));
setLayout(layout);
public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) {
if (isSelected) {
setBackground(table.getSelectionBackground());
} else {
setBackground(table.getBackground());
// Border section taken from DefaultTableCellRenderer
if (hasFocus) {
Border border = null;
if (isSelected) {
border = DefaultLookup.getBorder(this, ui, "Table.focusSelectedCellHighlightBorder");
if (border == null) {
border = DefaultLookup.getBorder(this, ui, "Table.focusCellHighlightBorder");
setBorder(border);
if (!isSelected && table.isCellEditable(row, column)) {
Color col;
col = DefaultLookup.getColor(this, ui, "Table.focusCellForeground");
if (col != null) {
super.setForeground(col);
col = DefaultLookup.getColor(this, ui, "Table.focusCellBackground");
if (col != null) {
super.setBackground(col);
} else {
setBorder(null /*getNoFocusBorder()*/);
// Set up our label
label.setText(value.toString());
label.setFont(table.getFont());
return this;
public TableCellPanelTest() {
JTable table = new JTable(new Integer[][]{{1, 2, 3}, {4, 5, 6}}, new String[]{"A", "B", "C"});
// set up a custom renderer on the first column
TableColumn firstColumn = table.getColumnModel().getColumn(0);
firstColumn.setCellRenderer(new PanelRenderer());
getContentPane().add(table);
pack();
public static void main(String[] args) {
EventQueue.invokeLater(new Runnable() {
public void run() {
new TableCellPanelTest().setVisible(true);
}There are basically two problems:
1) When first run, the text in the custom renderer column is shifted downward slightly.
2) Once a cell in the column is selected, it shifts down even farther.
I'd really appreciate any help in figuring out what's up!
Thanks!1) LayoutManagers need to take the border into account so the label is placed at (1,1) while labels just start at (0,0) of the cell rect. Also the layout manager tend not to shrink component below their minimum size. Setting the labels minimum size to (0,0) seems to get the same effect in your example. Doing the same for maximum size helps if you set the row height for the JTable larger. Easier might be to use BorderLayout which ignores min/max for center (and min/max height for west/east, etc).
2) DefaultTableCellRenderer uses a 1px border if the UI no focus border is null, you don't.
3) Include a setDefaultCloseOperation is a SSCCE please. I think I've got a hunderd test programs running now :P. -
Does resteasy API have class loader issues when using via OSGi
Does resteasy API have class loader issues when using via OSGi
Hi Scott,
THis isnt an answer to ur Question, but could u tell me which jar files are needed for the packages:
com.sap.portal.pcm.system.ISystems
com.sap.portal.pcm.system.ISystem
and under which path I coul dfind them.
Thnx
Regards
Meesum. -
Odd issue when using UDT (user defined type)
Hi all,
11g.
I ran into an odd issue when using UDT, I have these 4 schemas: USER_1, USER_2, USER_A, USER_B.
Both USER_1 and USER_2 have an UDT (actually a nested table):
CREATE OR REPLACE TYPE TAB_NUMBERS AS TABLE OF NUMBER(10)USER_A has a synonym points to the type in USER_1:
create or replace synonym TAB_NUMBERS for USER_1.TAB_NUMBERS;USER_B has a synonym points to the type in USER_2:
create or replace synonym TAB_NUMBERS for USER_2.TAB_NUMBERS;Both USER_A and USER_B have a procedure which uses the synonym:
CREATE OR REPLACE PROCEDURE proc_test (p1 in tab_numbers)
IS
BEGIN
NULL;
END;And in the C# code:
OracleConnection conn = new OracleConnection("data source=mh;user id=USER_A;password=...");
OracleCommand cmd = new OracleCommand();
cmd.Connection = conn;
cmd.CommandText = "proc_test";
cmd.CommandType = CommandType.StoredProcedure;
OracleParameter op = new OracleParameter();
op.ParameterName = "p1";
op.Direction = ParameterDirection.Input;
op.OracleDbType = OracleDbType.Object;
op.UdtTypeName = "TAB_NUMBERS";
Nested_Tab_Mapping_To_Object nt = new Nested_Tab_Mapping_To_Object();
nt.container = new decimal[] { 1, 2 };
op.Value = nt;
......This code works fine, but it raises an error when I change the connection string from USER_A to USER_B, the error says:
OCI-22303: type ""."TAB_NUMBERS" not foundInterestingly, if I change op.UdtTypeName = "TAB_NUMBERS"; to op.UdtTypeName = "USER_2.TAB_NUMBERS", the error is gone, and everything works fine.
Anyone has any clues?
Thanks in advance.Erase and reformat the ext HD. Then, redo the SuperDuper! backup.
-
Bluetooth issues when using smartwatch on the z1s
I'm having some Bluetooth issues when using my smartwatch. I usually use my z1s with my car radio via Bluetooth to listen to music and for making calls. Now that I got a sony smartwatch I always got problems with the calls. It looks like that the Bluetooth turns off during the call when I'm using the smartwatch. I already tried by deleting and pairing again the z1s, but nothing works. Not sure if maybe the z1s does not support the smartwatch and the care radio Bluetooth connection at the same time. However it works fine when playing music! The problem is just with the calls. This never happens before I got the smartwatch.
I have the Tmobile Z1s and a SW2 and have the same issues with multiple devices:
1) Bose Soundlink Mini
2) Sony MBR-100
3) My car's bluetooth
4) Ford Sync
5) Sony SBH20
6) Motorola S305
If the phone connects to the A2DB device, it will typically play fine for several minutes. Then, audio will drop out. If I do nothing, after several minutes my watch will vibrate to show it has disconnected. Sometimes audio then comes back, and sometimes it doesn't.
Sometimes my phone will not connect to my car. Then, if I can get it to connect, it will only allow for phone audio, not media audio.
This issue has been on (2) Z1s's with the SW2. The first I returned due to touch screen issues, which the second one also has. All of the devices above worked perfectly fine with my Xperia Z, Galaxy S2, HTC One, etc. The Xperia Z and the SW2 never had any problems.
Honestly, this phone has been incredibly frustrating. If the upcoming updates for either the SW2 or Z1S don't fix this issue, I'm going to return it and get something else. -
QBE issue when using different db types
Hello,
Our ADF application has the ability to connect to the same schema but different backends (Oracle and SQL Server). I have successfully implemented switching the AM data source. I am running into a syntax issue when performing Query By Example for a table. The error is (Incorrect Syntax near "|"). In the VOImpl I overrode the function public String getViewCriteriaClause(boolean forQuery) and I can see the viewCriteriaClause is "( (UPPER(TransMasterEO.TMMessage) LIKE UPPER( ? || '%') ) )". This works when running against the Oracle instance but fails when running against the SQL Server instance.
I implemented code to replace the "||" with "+" but then we fail on Oracle. Can someone recommend an approach to resolve?
Running 11.1.1.6
Thank you
Rudyhe different dbs yre using different sql flavors. This is causing trouble if you change the connection to a db which is using a different flavor. I'm not aware that you can change the flavor used to build the queries to, but you can implement your own sqlbuilder which may just extend from the one for hte right flavor and then build the sql through the right class.
Check http://jobinesh.blogspot.com/2013/02/customizing-sql-builder-class.html for more info on how to change the sqlbuilder.
Timo -
Issue when using Navigation attributes for filtering in BEX
Hello,
We are encountering an issue when applying filter on Navigation attributes in BEx query built on top of a BW HANA Virtual Provider.
The interface is as below :
HANA Calculation View -> SAP BW 7.4 Virtual InfoCube -> Multiprovider -> BEx Query.
We have directly mapped the base Infoobject from HANA View to BW Virtual Provider and using this in BEx query free characteristics. We also have used the navigational attribute of this Infoobject in our Report variable screen as well as an Auth relevant object.
Eg if ZMATERIAL is the base infoobject and ZMATERIAL__ZXYZ navigational attribute is used in the report variable screen and as Authorization variable.
This is causing the query to fail.
The query also fails if I apply any filter values on any Navigational attribute with error message :
"Termination message sent ERROR DBMAN (305): Error reading the data of InfoProvider"
Using the navigational attribute with authorization variable fails with below :
"Termination message sent ERROR DBMAN (099): Invalid query;Failed to find attribute ZMATERIAL__ZXYZ [...]"
Appreciate any inputs on this issue and how this can be fixed.
Thanks,
TintuHi Andrey,
Thank you for your input.
Based on the OSS note , it says to import BW7.4 SP7. We are already on BW7.4 SP7
We get error "Termination message sent ERROR DBMAN (099): Invalid query;Failed to find attribute
ZMATERIAL__ZXYZ" whenever we try to apply filters on any of the navigational attribute.
Thanks,
Tintu -
Cursors are not closed when using Ref Cursor Query in a report ORA-01000
Dear Experts
Oracel database 11g,
developer suite 10.1.2.0.2,
application server 10.1.2.0.2,
Windows xp platform
For a long time, I'm hitting ORA-01000
I have a 2 group report (master and detail) using Ref Cusor query, when this report is run, I found that it opens several cursors (should be only one cursor) for the detail query although it should not, I found that the number of these cursors is equal to the number of master records.
Moreover, after the report is finished, these cursors are not closed, and they are increasing cumulatively each time I run the report, and finally the maximum number of open cursors is exceeded, and thus I get ORA-01000.
I increased the open cursors parameter for the database to an unbeleivable value 30000, but of course it will be exceeded during the session because the cursors are increasing cumulatively.
I Found that this problem is solved when using only one master Ref Cursor Query and create a breake group, the problem is solved also if we use SQL Query instead of Ref Query for the master and detail queries, but for some considerations, I should not use neither breake group nor SQL Query, I have to use REF Cursor queries.
Is this an oracle bug , and how can I overcome ?
Thanks
Edited by: Mostafa Abolaynain on May 6, 2012 9:58 AMThank you Inol for your answer, However
Ref Cursor give me felxibility to control the query, for example see the following query :
function QR_1RefCurDS return DEF_CURSORS.JOURHEAD_REFCUR is
temp_JOURHEAD DEF_CURSORS.JOURHEAD_refcur;
v_from_date DATE;
v_to_date DATE;
V_SERIAL_TYPE number;
begin
SELECT SERIAL_TYPE INTO V_SERIAL_TYPE
FROM ACC_VOUCHER_TYPES
where voucher_type='J'
and IDENT_NO=:IDENT
AND COMP_NO=TO_NUMBER(:COMPANY_NO);
IF :no_date=1 then
IF V_SERIAL_TYPE =1 THEN
open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
FROM JOURHEAD
WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
AND IDENT=:IDENT
AND ((TO_NUMBER(VOCH_NO)=:FROM_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NULL)
OR (TO_NUMBER(VOCH_NO) BETWEEN :FROM_NO AND :TO_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NOT NULL )
OR (TO_NUMBER(VOCH_NO)<=:TO_NO and :FROM_NO IS NULL AND :TO_NO IS NOT NULL )
OR (:FROM_NO IS NULL AND :TO_NO IS NULL ))
ORDER BY TO_NUMBER(VOCH_NO);
ELSE
open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
FROM JOURHEAD
WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
AND IDENT=:IDENT
AND ((VOCH_NO=:FROM_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NULL)
OR (VOCH_NO BETWEEN :FROM_NO AND :TO_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NOT NULL )
OR (VOCH_NO<=:TO_NO and :FROM_NO IS NULL AND :TO_NO IS NOT NULL )
OR (:FROM_NO IS NULL AND :TO_NO IS NULL ))
ORDER BY VOCH_NO;
END IF;
ELSE
v_from_date:=to_DATE(:from_date);
v_to_date:=to_DATE(:to_date);
IF V_SERIAL_TYPE =1 THEN
open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
FROM JOURHEAD
WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
AND IDENT=:IDENT
AND ((voch_date between v_from_date and v_to_date and :from_date is not null and :to_date is not null)
OR (voch_date <= v_to_date and :from_date is null and :to_date is not null)
OR (voch_date = v_from_date and :from_date is not null and :to_date is null)
OR (:from_date is null and :to_date is null ))
ORDER BY VOCH_DATE,TO_NUMBER(VOCH_NO);
ELSE
open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
FROM JOURHEAD
WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
AND IDENT=:IDENT
AND ((voch_date between v_from_date and v_to_date and :from_date is not null and :to_date is not null)
OR (voch_date <= v_to_date and :from_date is null and :to_date is not null)
OR (voch_date = v_from_date and :from_date is not null and :to_date is null)
OR (:from_date is null and :to_date is null ))
ORDER BY VOCH_DATE,VOCH_NO;
END IF;
END IF;
return temp_JOURHEAD;
end; -
Smartform font spacing Issue when using SAP printer name
Hi Friends,
I am facing some spacing issues when printing a form using SAP printer name. If I use LOCL then the output comes perfectly but when I use the SAP printer name the space between characters are getting widened and so the alignment of each column goes wayward. I suspect it could be due to the device type but not sure which seeting controls this. There is a similar problem in the logo as well. When using LOCL the logo comes out good but when using the printer name the quality is not good and becomes pixelised. Have any of you faced similar issues? Can you provide some guidance or pointers for the solution.
Device type of LOCL : ZSAPWIN
Device type of SAP printer name : ZHPLJ5
CPI is defined in smartform as 10.
Please let me know if you need more information.
Thanks,
PraveenHi,
This problem occurs because the printer driver for both the printers are different,
I suggest you use Local printer only or configure any other printer with printer diver in SAP as SAPWIN.
Regards,
Bharat. -
Performance issues when using Smart View and Excel 2010
Hello, we are experiencing very slow retrieval times when using Smart View and Excel 2010. Currently on v.11.1.3.00 and moved over from Excel 2003 in the last quarter. The same spreadsheets in 2010 (recreated) are running much slower than they used to in 2003 and I was wondering if anyone else out there has experienced similar problems?
It looks like there is some background caching going on as when you copy and paste the contents into a new file and retrieve it is better.....initially. The size of the files are generally less than 2mb and there aren't an expecially large number of subcubes requested so I am at a loss to explain or alleviate the issues.
Any advice / tips on how to optimise the performance would be greatly appreciated.
Thanks,
NickHi Nick,
Office 2010 (32 bit) only is supported.
Also check these documents:
Refresh in Smart View 11.1.2.1 is Slow with MS Office 2010. (Doc ID 1362557.1)
Smart View Refresh Returns Zeros (Doc ID 758892.1)
Internet Explorer (IE7, IE8 and IE9) Recommended Settings for Oracle Hyperion Products (Doc ID 820892.1)
Thank you,
Charles Babu J
Edited by: CJX on Nov 15, 2011 12:21 PM -
XML Parse issues when using Network Data Model LOD with Springframework 3
Hello,
I am having issues with using using NDM in conjuction with Spring 3. The problem is that there is a dependency on the ConfigManager class in that it has to use Oracle's xml parser from xmlparserv2.jar, and this parser seems to have a history of problems with parsing Spring schemas.
My setup is as follows:
Spring Version: 3.0.1
Oracle: 11GR2 and corresponding spatial libraries
Note that when using the xerces parser, there is no issue here. It only while using Oracle's specific parser which appears to be hard-coded into the ConfigManager. Spring fortunately offers a workaround, where I can force it to use a specific parser when loading the spring configuration as follows:
-Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl But this is an extra deployment task we'd rather not have. Note that this issue has been brought up before in relation to OC4J. See the following link:
How to change the defaut xmlparser on OC4J Standalone 10.1.3.4 for Spring 3
My question is, is there any other way to configure LOD where it won't have the dependency on the oracle parser?
Also, fyi, here is the exception that is occurring as well as the header for my spring file.
org.springframework.beans.factory.xml.XmlBeanDefinitionStoreException:
Line 11 in XML document from URL [file:/C:/projects/lrs_network_domain/service/target/classes/META-INF/spring.xml] is invalid;
nested exception is oracle.xml.parser.schema.XSDException: Duplicated definition for: 'identifiedType'
at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:396)
[snip]
... 31 more
Caused by: oracle.xml.parser.schema.XSDException: Duplicated definition for: 'identifiedType'
at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:425)
at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:331)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:222)
at oracle.xml.jaxp.JXDocumentBuilder.parse(JXDocumentBuilder.java:155)
at org.springframework.beans.factory.xml.DefaultDocumentLoader.loadDocument(DefaultDocumentLoader.java:75)
at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:388)Here is my the header for my spring configuration file:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:aop="http://www.springframework.org/schema/aop"
xmlns:tx="http://www.springframework.org/schema/tx"
xmlns:context="http://www.springframework.org/schema/context"
xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop.xsd
http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx.xsd
http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context.xsd">Thanks, TomI ran into this exact issue while trying to get hibernate and spring working with an oracle XMLType column, and found a better solution than to use JVM arguments as you mentioned.
Why is it happening?
The xmlparserv2.jar uses the JAR Services API (Service Provider Mechanism) to change the default javax.xml classes used for the SAXParserFactory, DocumentBuilderFactory and TransformerFactory.
How did it happen?
The javax.xml.parsers.FactoryFinder looks for custom implementations by checking for, in this order, environment variables, %JAVA_HOME%/lib/jaxp.properties, then for config files under META-INF/services on the classpath, before using the default implementations included with the JDK (com.sun.org.*).
Inside xmlparserv2.jar exists a META-INF/services directory, which the javax.xml.parsers.FactoryFinder class picks up and uses:
META-INF/services/javax.xml.parsers.DocumentBuilderFactory (which defines oracle.xml.jaxp.JXDocumentBuilderFactory as the default)
META-INF/services/javax.xml.parsers.SAXParserFactory (which defines oracle.xml.jaxp.JXSAXParserFactory as the default)
META-INF/services/javax.xml.transform.TransformerFactory (which defines oracle.xml.jaxp.JXSAXTransformerFactory as the default)
Solution?
Switch all 3 back, otherwise you'll see weird errors. javax.xml.parsers.* fix the visible errors, while the javax.xml.transform.* fixes more subtle XML parsing (in my case, with apache commons configuration reading/writing).
QUICK SOLUTION to solve the application server startup errors:
JVM Arguments (not great)
To override the changes made by xmlparserv2.jar, add the following JVM properties to your application server startup arguments. The java.xml.parsers.FactoryFinder logic will check environment variables first.
-Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl -Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl -Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
However, if you run test cases using @RunWith(SpringJUnit4ClassRunner.class) or similar, you will still experience the error.
BETTER SOLUTION to the application server startup errors AND test case errors:
Option 1: Use JVM arguments for the app server and @BeforeClass statements for your test cases.
System.setProperty("javax.xml.parsers.DocumentBuilderFactory","com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl");
System.setProperty("javax.xml.parsers.SAXParserFactory","com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl");
System.setProperty("javax.xml.transform.TransformerFactory","com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl");
If you have a lot of test cases, this becomes painful.
Option 2: Create your own Service Provider definition files in the compile/runtime classpath for your project, which will override those included in xmlparserv2.jar.
In a maven spring project, override the xmlparserv2.jar settings by creating the following files in the %PROJECT_HOME%/src/main/resources directory:
%PROJECT_HOME%/src/main/resources/META-INF/services/javax.xml.parsers.DocumentBuilderFactory (which defines com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl as the default)
%PROJECT_HOME%/src/main/resources/META-INF/services/javax.xml.parsers.SAXParserFactory (which defines com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl as the default)
%PROJECT_HOME%/src/main/resources/META-INF/services/javax.xml.transform.TransformerFactory (which defines com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl as the default)
These files are referenced by both the application server (no JVM arguments required), and solves any unit test issues without requiring any code changes.
This is a snippet of my longer solution for how to get hibernate and spring to work with an oracle XMLType column, found on stackoverflow. -
Slicing image issue when using "save for web"
Keep in mind I am a newbi to photoshop and these forums. I am currently having an issue with using the slice tool when trying to save the image in html format. I have my image completed and when I use the "save for web" feature, it comes up just fine. Then I click the slice tool on the tool bar on the left, and try to drag over the area that I want to slice and it wont work. Currently, every time I try to use the save for when feature, the new box pops up and shows my image with a 1 and a symbol on the top left of the image like the whole image is already made into a slice. The only thing I can do is left click and hold to drag the transparent box to where I want to slice the image, and when I let go, the image does not slice. Any help would be great!
Completely wrong workflow. See the online help on the slice tool.
Mylenium
Maybe you are looking for
-
How to add New field in SMART forms.
How to add new field in the SMART FORMS. Please know me the step. Please help me soon. Moderator message: Welcome to SCN! Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "
-
How to change an event in Event structure Automatically?
Hi, I want to change an event automatically when a boolean value change occurs.I tried with a blinking LED but it didn't work.Can any one help? Please Mark the solution as accepted if your problem is solved and donate kudoes Solved! Go to Solut
-
IPad not eligible for requested build
Dear apple support users, I'm dealing with the following problem on my iPad, and though I already searched the entire internet for help, the problem is still not fixed. A few months ago, the 4.2 GM version was released for developers, and because I w
-
the "close tab" option is not on the File drop-down menu today. It was before I upgraded yesterday to the new version of firefox. So how do I close one tab?
-
Do I have to install the updates to CS4 in order?
Or does 6.0.5 contain all the updates in the previous 4 versions? Thanks, Harry