Issue while installing oracle in suse linux 11
Hi all,
When i try to execute runinstaller from root its not allowing me to run.
I am trying to install oracle 10g.
./runInstaller -ignoreSysPrereqs
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Failed <<<<
>>> Ignoring required pre-requisite failures. Continuing...
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-10-03_07-00-51AM. Please wait ...
The user is root. Oracle Universal Installer cannot continue installation if the user is root.
: No such file or directory
Is there some thing we can do to bypass and install with root.Thanks.
Ambarish annapureddy wrote:
>
> Is there some thing we can do to bypass and install with root.Thanks.
No, please install using orasid.
Thanks
Similar Messages
-
An issue while installing oracle 10g express edition on Ubuntu 10.04-64bit
Hi,
I'm running into an issue while installing oracle 10g express edition on my Ubuntu 10.04-64 bit installed machine using oracle-xe-universal_10.2.0.1-1.0_i386.deb package. The issue actually came up when I was trying to reinstall the package after uninstalling it due to some problem I had with my login credentials. To elaborate further on it, the /etc/init.d/oracle-xe script does not get created when I execute the debian package and thus i'm unable to configure the required credentials and stuff after the installation. I doubt whether this has something to do with the procedure I followed when uninstalling the previous package it. But what I did was just what's mentioned in the following [http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm] user guide published by oracle.
Another important clue would be, the platform of my machine is amd64bit although I'm dealing with an installation package preferred for i386. But I believe it's the only thing available in the oracle software download section. Hence I had to use the --force-architecture option to install it. But after reading some post published on this forum, I've figured out that it does not affect the usual execution of the software. Anyway, I would greatly appreciate some help on this matter.
[1] http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
Thanks and Regards,
Prabath Abeysekara
Edited by: 829281 on Jan 18, 2011 7:52 PMHi,
Finally I've managed to find a solution for this issue. Thanks a lot for all the replies.
Here's how I got rid of it.
Addressing all the facts one by one,
1.The problem of not getting the /etc/init.d/oracle-xe script generated was avoided
by removing all the configuration files that were previously created while installing
the product. The following command can be used to accomplish that task.
*$ dpkg --purge oracle-xe*
2.Next, Initially the password I used during the configuration process was "admin".
Although I tried a couple of times installing the product providing the aforementioned
password, the web UI kept prompting "Invalid Credentials" message not allowing me
to login. But, this particular issue could be avoided by giving some other simple
password.
Finally, got it working and once again thanks a bunch for taking the burden of
replying this thread.
Cheers,
Prabath -
Issue while Installing Oracle Data Access Software for Windows
All,
Iam getting the following error while installing Oracle Data Access Software for windows. Iam installing in WindowsXP, with Oracle 9i release 9.2.0.7.0 DB and client in the same Box.
It shows
The Specified Key key was not found while trying to GetValue
* Stop installation of all Products
* Stop installtion of this componenent only.
Kindly let me know why this error is showing up.
Regards
RameshMost probably you have hit this issue:
"If you have more than one Oracle Home installed on the same machine (e.g. Oracle8i client and Oracle9i Release 2 client), use the Oracle Home Selector to run your applications with Oracle9i Release 2 client. "
As documented on the Oracle Data Access Software for Windows. Release 9.2.0.4.0
~ Madrid. -
Oui-10207error while installing oracle 10g on linux in vmware
Hi,
I have installed vmware on windows 7(64 bit) on which i have installed Oracle Enterprise linux 5. I have set all the variables correctly. but when i try to install oracle 10g on linux, i get the error
OUI-10207:there is not enough disk space in the OUI swap area /tmp/OraInstall2011-10-17_03-44-48PM.Please make atleast 529KB of space avaivale and retry.
but i have around 95bg of space. My partitions are as follows
Device Boot Start End Blocks Id System
/dev/sda1 * 1 12551 100815876 83 linux
/dev/sda2 12552 13041 3935925 82 Linux swap/solaris
/dev/sda3 13042 13054 104422+ 83 linux
Please help me in solving the problem.
Thanks
VirajWhat is your swap size? try to increase size
execute below command on terminal, paste result here.
#swapon -s
#free
Tips : how to increase swap space
http://hackertrip.wordpress.com/2011/09/11/increase-swap-space/ -
Error while installing oracle R2 on linux
hi guy's,
first of all plz forgive me if i am placing this at wrong place.
actually i am trying to install oracle database 10g R2 on RHEL5 x86 platform.i complated all prerequisite for installing oracle on linux specified at
http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRHEL5.php#Installation
but i am getting following errors while installation.
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-12-12_08-39-28PM. Please wait ...[oracle@SW044 /]$ Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using 'sw044:0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
at java.awt.Window.init(Unknown Source)
at java.awt.Window.<init>(Unknown Source)
at java.awt.Frame.<init>(Unknown Source)
at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInstaller.java:378)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2091)
what this error represents ?? what steps should i follow?
plz help
thanks and regards
VDactually sir i am doing this as oracle user.
and i have set DISPLAY=<machine-name>:0.0; export DISPLAY environment corrctly,and i ma using X emulation.
now what is the problem?
thanks and regards
VD -
Issues while installing ORACLE 10g R2 RAC on RHEL 5.3
i am installing oracle 10g R2 RAC on RHEL 5.3 in a test environment. my aim was to install using ASM.
i went through the pre-requisites ok before beginning with the installation.
since RHEL 5.3 doesnt support raw devices i used
http://www.idevelopment.info/data/Unix/Linux/LINUX_ConnectingToAniSCSITargetWithOpen-iSCSIInitiatorUsingLinux.shtml#Configure%20iSCSI%20Initiator%20and%20New%20Volume
udev to configure shared storage. my storage is on openfiler as a iSCSI target.
fdisk -l on both nodes shows the shared drives.
[root@node1 ~]# fdisk -l
Disk /dev/sda: 21.4 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 2053 16386300 8e Linux LVM
/dev/sda3 2054 2372 2562367+ 82 Linux swap / Solaris
Disk /dev/sdd: 10.5 GB, 10502537216 bytes
64 heads, 32 sectors/track, 10016 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/sdd1 1 10016 10256368 83 Linux
Disk /dev/sdb: 10.5 GB, 10536091648 bytes
64 heads, 32 sectors/track, 10048 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 10048 10289136 83 Linux
Disk /dev/sdc: 10.5 GB, 10536091648 bytes
64 heads, 32 sectors/track, 10048 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 10048 10289136 83 Linux
Disk /dev/sdf: 10.5 GB, 10569646080 bytes
64 heads, 32 sectors/track, 10080 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/sdf1 1 10080 10321904 83 Linux
Disk /dev/sde: 10.5 GB, 10502537216 bytes
64 heads, 32 sectors/track, 10016 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Device Boot Start End Blocks Id System
/dev/sde1 1 10016 10256368 83 Linux
[root@node1 ~]# ls -l /dev/iscsi/arpl*
/dev/iscsi/arpl1:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sde
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sde1
/dev/iscsi/arpl2:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdd
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdd1
/dev/iscsi/arpl3:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdb
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdb1
/dev/iscsi/arpl4:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdc
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdc1
/dev/iscsi/arpl5:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdf
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdf1
[root@node1 ~]# configuring udev results in the drives being mapped to persistent drive names eg. /dev/iscsi/arpl1/part1
still when i enter the name of the raw device which i have created i get the following error. please help
Image: !http://img91.imageshack.us/img91/7448/oracle.png!did you check this
http://download-west.oracle.com/docs/cd/B19306_01/install.102/b14203/storage.htm#BABBHECD
http://download.oracle.com/docs/cd/B28359_01/install.111/b28263/storage.htm#CDEBFDEH
also before you do what is suggested on the url posted by Mufalani,
it seems that you should do the following:
Check existence of udev raw mapping rule file /etc/udev/rules.d/60-raw.rules
On RH/EL5, udev raw mapping rule file /etc/udev/rules.d/60-raw.rules should exist by default as part of the util-linux package, for example:
# ls /etc/udev/rules.d/60-raw.rules
/etc/udev/rules.d/60-raw.rulesCreate a custom udev raw mapping rule file, /etc/udev/rules.d/61-oracleraw.rules say, for example:
# touch /etc/udev/rules.d/61-oracleraw.rules3b. Add udev raw binding rules to /etc/udev/rules.d/61-oracleraw.rules file
Add the udev raw binding rules to the /etc/udev/rules.d/61-oracleraw.rules file, for example:
# cat /etc/udev/rules.d/61-oracleraw.rules
# Raw bind to Oracle Clusterware devices
ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524174", RUN+="/bin/raw /dev/raw/raw1 %N"
ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524179", RUN+="/bin/raw /dev/raw/raw2 %N"If migrating to RHEL5/OEL5 from an earlier Linux version that relied on /etc/sysconfig/rawdevices file for persistent raw device bindings, the following script can be used as a basis for generating your RHEL5/OEL5 udev rules. Note, the script does not factor device name persistency.
#!/bin/bash
grep -v "^ *#" /etc/sysconfig/rawdevices | grep -v "^$" | while read dev major minor ; do
if [ -z "$minor" ]; then
echo "ACTION==\"add\", KERNEL==\"${major##/dev/}\", RUN+=\"/bin/raw $dev %N\""
else
echo "ACTION==\"add\", ENV{MAJOR}==\"$major\", ENV{MINOR}==\"$minor\", RUN+=\"/bin/raw $dev %M %m\""
fi
done -
Can't install Oracle on SuSE Linux 9.3 Pro
Hi,
i try since three weeks to install Oracle 9.2 Release 2. My last Problem was,
that i didn't know how to log in as the created Oracle User. This Problem is solved.
But when i install Oracle as the Oracle User and try to configure the Administrator
Group, i get the error, that i don't have the specific permission to change that,
so i gave the Oracle User all Rights about every directory (chown oracle:dba / ).
After that the Installation proceed without any problem, but after the Installation,
the Database Configuration Assistant failed to install and two other Assistants, too.
So, i don't know where there problem is. I fulfilled every pre-installation Task, but
it still isn't possible for me, to install Oracle 9.2 on a SuSE Linux 9.3 Professional
System.
If anyone could help me along this Installation, i would be very thankful.
Thanks a lot
DanielBut when i don't give the oracle user all rights, it isn't possible to proceed with theinstallation
But if you give that rights then it's a security hole. According to your words I guess you have similar enviroment settings:
ORACLE_BASE=/
ORACLE_HOME=/<directory_name>
Why you not installing on deeper directory such as /opt or some your own directory? For example
ORACLE_BASE=/myoracledir
ORACLE_HOME=$ORACLE_BASE/<directory_name>
Then chown -R oracle:dba /myoracledir.
Then oracle will be owner just for /myoracle directory and all its subdirectories.
i just could look at the error details, but they didn't described the erroranyway.
That's not so true. Error log you could find in /tmp/OraInstallYYYY-MM-DD_HH_MI_SS.. -
Domain issue while installing oracle forms 11g
Hi . Trying to install oracle Forms 11g ,while installing it is getting error while creating domain .. Any clue.
Below are log after performing the suggested steps..
Successfully launched the Node Manager.
The Node Manager process is running independent of the WLST process.
Exiting WLST will not stop the Node Manager process. Please refer
to the Node Manager logs for more information.
The Node Manager logs will be under D:\Oracle\weblogic64\wlserver_10.3\common\nodemanager
Node Manager starting in the background
java.lang.Exception: The node manager failed to start
at oracle.as.provisioning.weblogic.ASDomain._startNodeManager(ASDomain.java:3709)
at oracle.as.provisioning.weblogic.ASDomain.startNodeManager(ASDomain.java:3517)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:637)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
java.lang.Exception: The node manager failed to start
at oracle.as.provisioning.weblogic.ASDomain._startNodeManager(ASDomain.java:3709)
at oracle.as.provisioning.weblogic.ASDomain.startNodeManager(ASDomain.java:3517)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:637)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(Confi -
Issue while installing oracle Databse 10g express edition
Hi,
when i am trying to install Oracle database 10g express edition, it is hanging again and again on one step.
Step is
"Creating and starting Serivices for ORacle database 10g express edition".
Could any one can help me out in this regard.
ThanksYour answer might be here:
Creating and starting services for Oracle Database 10g express edition
Is this the first or second installation attempt?
Edited by: Markus Waldorf on Sep 20, 2010 1:59 PM
A better link with a solution:
Oracle XE installation wizard stop at "creating and starting services ..." -
Issue while installing Oracle Revenue Management and Billing for Financial
I'm trying to install RMB and getting the below error. I have installed MicroFocus Server 5.1 with the WrapPack 3 but still getting the Winsock error. Please advise.
- 2012-01-17 16:29:59,278 [main] ERROR (host.sockets.WindowsPipeSocket) Cannot instantiate com.splwg.base.support.cobol.host.sockets.WindowsPipeSocket because of problem loading a library com_splwg_base_support_cobol_host_sockets_WindowsPipeSocket during static initialization.
java.lang.UnsatisfiedLinkError: no com_splwg_base_support_cobol_host_sockets_WindowsPipeSocket in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1738)
at java.lang.Runtime.loadLibrary0(Runtime.java:823)
at java.lang.System.loadLibrary(System.java:1028)
at com.splwg.base.support.cobol.host.sockets.WindowsPipeSocket.<clinit>(WindowsPipeSocket.java:25)
at com.splwg.base.support.cobol.host.sockets.WindowsPipeSocketStrategy.clearServerPortResources(WindowsPipeSocketStrategy.java:51)
at com.splwg.base.support.cobol.host.SocketStrategy.bindServerPort(SocketStrategy.java:144)
at com.splwg.base.support.cobol.host.OptimizedRemoteExecuterSkel.<init>(OptimizedRemoteExecuterSkel.java:43)
at com.splwg.base.support.cobol.host.OptimizedInvocationStrategy.startOnParentJvm(OptimizedInvocationStrategy.java:25)
at com.splwg.base.support.cobol.host.RemoteJVMFactoryImpl.<init>(RemoteJVMFactoryImpl.java:64)
at com.splwg.base.support.cobol.host.CobolHostStartup.startup(CobolHostStartup.java:41)
at com.splwg.base.support.context.ApplicationContext.initializeCobolRuntime(ApplicationContext.java:231)
at com.splwg.base.support.context.ApplicationContext.initialize(ApplicationContext.java:212)
at com.splwg.base.support.context.ContextFactory.buildContext(ContextFactory.java:115)
at com.splwg.base.support.context.ContextFactory.buildContext(ContextFactory.java:91)
at com.splwg.base.support.context.ContextFactory.createDefaultContext(ContextFactory.java:512)
at com.splwg.base.web.startup.SPLWebStartup.initializeApplicationContext(SPLWebStartup.java:181)
at com.splwg.base.web.startup.SPLWebStartup.contextInitialized(SPLWebStartup.java:63)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3827)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4334)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:719)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
at org.apache.catalina.core.StandardService.start(StandardService.java:516)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
at org.apache.catalina.startup.Catalina.start(Catalina.java:566)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
- 2012-01-17 16:29:59,278 [main] FATAL (support.context.ApplicationContext) Error initializing ApplicationContext
- 2012-01-17 16:29:59,278 [main] INFO (web.startup.SPLWebStartup) Shutting Down the JMX Connectors...
- 2012-01-17 16:29:59,294 [main] INFO (web.startup.SPLWebStartup) JMX Connectors shutdown successfully
- 2012-01-17 16:29:59,294 [main] INFO (web.startup.SPLWebStartup) Shutting Down the Application Context...
- 2012-01-17 16:29:59,294 [main] ERROR (web.startup.SPLWebStartup) Exception shutting down SPL Application Context
Edited by: 906696 on Jan 17, 2012 3:13 AMHi Jeff,
Appreciate your suggestion. My intention was also to post it in the right forum but i could not find any forum for Oracle Revenue Management and Billing, since its a new product.
Its for such new products that we need help and support. Let me know if you are aware of any such forum. That would be great help indeed. -
Problem while installing oracle 10g on linux fedora 9 (suphur)
fallied to check sistem operating
is not found in the log of this session in / tmp/orainstall2008-8-21_03-34-55pm/installactions2008-08-21_03-34-55PM.log
some can help me about this please.
thanksActually that Linux version is not supported for 10g. You may try starting the installer as
$ ./runInstaller -ignoreSysPrereqs
BTW, not sure you won't have any problems afterwards, but it should work. -
Issue in installing oracle apps 11.5.5
Hello all,
i have an issue while installing oracle apps single node(vis demo).
if some one can help to sort out my issue or suggest some link where i can get the solution, i will be very thankful to him.
problem
1. i installed the j2sdk-1_4_2_06-windows-i586-p. also set the path
C:\j2sdk1.4.2_06\bin (this is the folder created while installing jdk).
also there is C:\Program Files\Java\j2re1.4.2_06\bin in window pragram folder.
i am sure which path has to set.
2. then install ms tool kit.
3. when i started apps installation then following erro is shown:
i/o exception in execprog:java.io.ioexception:createprocess: e:\dump\11.5.5\11istart001\rapidwiz\oui\nt\install\wiz32\setup.exe -responcefile c:\document~1\dhiren~1\locals~1\temp\rapidinstall\epd\vis8i.rsp error=2
"i know it is not apps forum but i get help then it will be great"
thanks n Regards
Yashalso there is C:\Program Files\Java\j2re1.4.2_06\bin in window pragram folder.
i am sure which path has to set.Do not use directories with space it the name (i.e. Program Files), so make sure you have it installed in another directory (i.e. C:\Java).
3. when i started apps installation then following erro is shown:
i/o exception in execprog:java.io.ioexception:createprocess: e:\dump\11.5.5\11istart001\rapidwiz\oui\nt\install\wiz32\setup.exe -responcefile c:\document~1\dhiren~1\locals~1\temp\rapidinstall\epd\vis8i.rsp error=2This is a generic error so please check the installation log file for details about the error.
Thanks,
Hussein -
This problem appears while installing oracle 10g on enterprise linux
Hi All,
While installing oracle 10g on enterprise linux 5 this message apear:
http://img134.imageshack.us/my.php?image=problemqy2.png
More Info:
Oracle 10g supports redhat 4 and Enterprise Linux is redhat 5 so I changed the redhat-release to 4 to countinue setup but the above error appears, also I tried this configuration on SuSE 10 I changed the SuSE-release to 9 and went good.The packeges are already installedIf you execute runInstaller again is the error message the same as before?
If yes can you post output for this command?
rpm -qa --qf '%{name}-%{version}-%{release}.%{arch}\n'|grep -i 'libxp' -
Error while installing developer 10g on linux suse 10.0
Hi All,
This error appears while installing developer 10g on linux suse 10.0
http://img179.imageshack.us/my.php?image=errorso9.pngTry locate (using find command for example) the libjvm.so file (I assume that is located somewhere under $ORACLE_HOME (probably jdk or jre directory)). If you locate the path where this library resides, try to add that path to $LD_LIBRARY_PATH enviroment variable.
Use copy&paste method (for error message) rather than link to image.
It is much quicker operation and it may help to other people because they be able to find this thread via search engine. -
Error while installing oracle 9i(9.2.0.1.0) on Red Hat Linux 8
hi
friends,
i'm getting error while installing Oracle 9i(9.2.0.1.0). this eror was came when linking process was going on. Error is as follow.
"Error in invoking target install of make file"
/home/oracle/product/9.2.0/plsql/lib/ins_plsql.mk"
/home/oracle/product/9.2.0/precomp/lib/ins_precomp.mk"
/home/oracle/product/9.2.0/sqlplus/lib/ins_sqlplus.mk"
/home/oracle/product/9.2.0/network/lib/ins_oemagent.mk"
pls. help me what to do?
DharmeshSee this :
I saw this error only in connection with Oracle 9i (9.0.1) installation.
Edit the file $ORACLE_HOME/bin/genclntsh and change the following line (people have sent me emails pointing out that this also works for Mandrake 8.1 and Mandrake 8.2):
LD_SELF_CONTAINED="-z defs"
to read:
LD_SELF_CONTAINED=""
Then run the script $ORACLE_HOME/bin/genclntsh as the user "oracle" and not as the user "root". Also make sure you have all the Oracle environments set! (I got so many emails because people were not doing this)
$ su - oracle
$ $ORACLE_HOME/bin/genclntsh
Created /opt/oracle/product/9.0.1/lib/libclntst9.a
$
After that hit retry in the error popup. This always worked for me.
(I was told that this also works for SuSE 8.0.)
Here is Oracle's official solution for Oracle 9iR1 or 9iR1 iAS on RedHat 2.1 Advanced Server:
http://otn.oracle.com/software/products/oracle9i/files/binutils_readme.html
from: http://www.puschitz.com/OracleOnLinux.shtml
Hope it help you
Basem
Maybe you are looking for
-
can anyone help me, the answer posted is for windows 7
-
How can I cancel an email..cancel button doesn't work
I have a blank email open and cannot close it..cancel button doesn't work. How can I get rid of it
-
Newly Installed HP desk jet 2510 all in one printer will not print web pages
Hello; I have just now installed my new 2510 desk jet printer and installed all software. It prints saved docs fins, but when I try and print web docs from the "print view " screen, it does not print. I have tried this a few times now. Any suggestion
-
EVALUATE_AGENT_VIA_EXPRESSION
Hi All. We're in ECC 5.0 We have custom workflow where one of its task is synchronous dialog task. Our dialog task is using ABAP Class and basically just pop up approval screen to user. The way we determine responsible agent is from ABAP Class and ou
-
URGENT: vertical lines length in the Mainwindow in smartforms
hI, In main window 4 vertical lines are there like.. below item | material no.er | mat.desc | quantity | total price | | | | Now the problem is: these vertical lines entered into the