Issue with a filter
I am having a really hard time applying the filter "Brush Strokes -> Angled Strokes" to a colored box, whether it's just a selection or a rectangular box.
I did this once and it worked (i.e. The box kept the same color and the correct filter was applied to it), but now I am trying to do it with a different box, whenever I access the Filter Gallery with the box selected, the color remains flat, even with the filter in question highlighted. I've tried everything I can think of, but it just seems like a weird glitch.. First time it worked, now it doesn't. Any idea what could be causing this?
Thanks a lot in advance.
New shapes on new layers don't have any layer styles for me. I don't recall running across an option for applying layer styles to new shapes.
Is it possible you're drawing pixels on the same layer? Layer styles are applied equally to whatever's on the entire layer.
As far as I know, new layer styles use whatever defaults you explicitly set for them. There are buttons such as the one shown below for setting your own default.
The [ ] Use Global Light feature is a bit special in that it uses one global angle for all layer styles (change any one and they all change) - the idea being that things look better when the shadows and highlights all imply the light is coming from the same direction.
Can you describe a specific case where the default you set isn't being used? I'll be happy to try to reproduce it.
-Noel
Similar Messages
-
Issue with parameter/filter - trying to display null rows
This is how my data looks in the database
Order_ID ----- Vendor
ID123 NULL
ID234 ABC
ID456 NULL
ID001 CDE
I want to create an SSRS report with a filter for vendors
*All Vendors should be checked off by default
*Users should be able to select multiple vendors
So I started by creating the VendorDataSet, the query looks like
SELECT VendorName
FROM Vendor
WHERE Active = 1
*This query will return all active vendors stored in my vendor table
Then, I created my parameter @prmVendor and it looks like:
-Data Type: Text
-Allow blank value("")
-Allow multiples values
Available Values:
-Dataset: Vendor
-Value field: vendor_name
-Label field: vendor_name
The main query of the report looks like
Select Order_ID, Vendor
FROM Order
LEFT JOIN Vendors
ON Order.VendorID = Vendor.ID
WHERE Vendor IN (@prmVendor)
So at this point it does what is supposed to do except - that when I run the query with all the vendors selected,
the query will only return the ones with vendors populated.
Order_ID ----- Vendor
ID234 ABC
ID001 CDE
I've tried adding the following to my VendorDataSet:
SELECT VendorName
FROM Vendor
WHERE Active = 1
UNION ALL
SELECT '' -- I've also tried SELECT NULL
But when I run the report and look at the list of vendor displayed - it won't show the empty row in the vendor drop down filter
thus, my main query will ignore the orders with no vendors.
Any ideas on how to fix this issue?
-AlanSo I changed my VendorDataSet to look like this:
;WITH cteVendors AS (
SELECT VendorName
FROM Vendor
WHERE Active = 1
UNION ALL
SELECT ''
SELECT (CASE WHEN Vendor IS NULL THEN '' ELSE Vendor END) AS VendorName
FROM cteVendors
This allowed me to show an empty box in my drop down filter see link for
image
Is there a way to make some changes to my main query so this works? so if the user was to select the blank box the query will return something like :
Order_ID ----- Vendor
ID123 NULL
ID456 NULL
-Alan -
Issues with table filter during navigation between task-flows
Hello everyone,
I'm looking for a workaround to resolve two issues about the table filter. They are:
1) If I type something in a filter and I change tha page (in a different task flow) when I return on the first page there is the previous search plus the string "%*". Here the video example: http://screencast.com/t/FbVenZGm
2) In the same scenario, if I click enter on this filter the system returns this message error: "Attempt to set a parameter name that does not occur in the SQL: vc_temp_1 ". Here the video example: http://screencast.com/t/yMs6rNDF
I have found something interesting in this thread: task-flow table filtering behaviour related to bug 8602867
Anyway, I have implemented the solution reported in this document: http://www.oracle.com/technetwork/developer-tools/adf/learnmore/april2012-otn-harvest-1609383.pdf (pp. 8-11). This solution works fine with my master table, but it doesn't with the detail table.
Have you any idea for this kind of behavior?
Thanks in advance,
BaduelSudipto,
each table has a binding on a page fragment in this way:
<af:table [...] binding="#{backingBeanScope.MyBackingBean.masterTable}">
<af:table [...] binding="#{backingBeanScope.MyBackingBean.detailTable}">
In the pageDef I have two methods, each one of the VOImpl class related to the table:
<methodAction IterBinding="MasterTableVO1Iterator"
id="clearOutstandingImplicitViewCriteriaMaster"
RequiresUpdateModel="true" Action="invokeMethod"
MethodName="clearOutstandingImplicitViewCriteria"
IsViewObjectMethod="true" DataControl="MyDataControl"
InstanceName="MyDataControl.MasterTableVO1"/>
<methodAction IterBinding="DetailTableVO2Iterator"
id="clearOutstandingImplicitViewCriteriaDetail"
RequiresUpdateModel="true" Action="invokeMethod"
MethodName="clearOutstandingImplicitViewCriteria"
IsViewObjectMethod="true" DataControl="MyDataControl"
InstanceName="MyDataControl.DetailTableVO1"/>
MyBackingBean class:
public class MyBackingBean {
private RichTable masterTable;
private RichTable detailTable;
/*getter methods here*/
public void setMasterTable(RichTable masterTable) {
this.masterTable = masterTable;
resetTableFilter(1);
public void setDetailTable(RichTable detailTable) {
this.detailTable = detailTable;
resetTableFilter(2);
/*This method returns the phase id */
private String printCurrenPhaseID() {
FacesContext fctx = FacesContext.getCurrentInstance();
Map requestMap = fctx.getExternalContext().getRequestMap();
PhaseId currentPhase=(PhaseId)requestMap.get("oracle.adfinternal.view.faces.lifecycle.CURRENT_PHASE_ID");
// System.out.println("currentPhase = "+currentPhase);
return currentPhase.toString();
public void resetTableFilter(int tab) {
String phase = printCurrenPhaseID();
FilterableQueryDescriptor queryDescriptor;
if(phase.startsWith("RENDER_RESPONSE")) { // Only in this phase the binding is ready
switch(tab) {
case 1:
queryDescriptor = (FilterableQueryDescriptor) getMasterTable().getFilterModel();
if (queryDescriptor != null && queryDescriptor.getFilterCriteria() != null) {
queryDescriptor.getFilterCriteria().clear();
// PPR refresh a jsf component
AdfFacesContext.getCurrentInstance().addPartialTarget(getMasterTable());
break;
case 2:
queryDescriptor = (FilterableQueryDescriptor) getDetailTable().getFilterModel();
if (queryDescriptor != null && queryDescriptor.getFilterCriteria() != null) {
queryDescriptor.getFilterCriteria().clear();
// PPR refresh a jsf component
AdfFacesContext.getCurrentInstance().addPartialTarget(getDetailTable());
break;
default: return;
invokeClearViewCriteria(tab);
public BindingContainer getBindings() {
return BindingContext.getCurrent().getCurrentBindingsEntry();
/* This method invokes the exposed method in my fragment */
public void invokeClearViewCriteria(int tab) {
BindingContainer bindings = getBindings();
OperationBinding operationBinding;
if(tab == 1)
operationBinding = bindings.getOperationBinding("clearOutstandingImplicitViewCriteriaMaster");
else if(tab == 2)
operationBinding = bindings.getOperationBinding("clearOutstandingImplicitViewCriteriaDetail");
else
return;
if(operationBinding != null) {
operationBinding.execute();
Finally I have two identical exposed methods in the VOImpl classes of the tables:
public void clearOutstandingImplicitViewCriteria() {
// we only want to remove the stuff that was added though the table
//filter (or a default search form)
// "__ImplicitViewCriteria__" is the magic name for this VC
ViewCriteria vcDefault = this.getViewCriteria(ViewCriteriaManager.IMPLICIT_VIEW_CRITERIA_NAME);
if (vcDefault != null) {
//Clear the stored values
vcDefault.clear();
//And refresh the collection
this.executeQuery();
Please note that this workaround works fine with my master table, but i does not with the detail table.
Thanks again.
Baduel -
Issues with limit/filter on outer join table in BQY
I'm converting a series of BQY's from Brio 6.6 to Hyperion 9.3. I have some questions about the "use ODBC outer join syntax on limits" option in the OCE. I sort of understand this option's purpose, but I don't completely understand the SQL I'm seeing. For example Brio 6.6 is generating the following SQL statement:
SELECT * FROM tblA AL1 LEFT OUTER JOIN tblB AL38 ON (AL38.ParentID=AL1.ChildID AND
AL38.Data='SomeData') WHERE ((NOT AL38.Action IS NULL))
Now, Hyperion 9.3 generated the SQL statement as follows:
SELECT * FROM tblA AL1 LEFT OUTER JOIN tblB AL38 ON (AL38.ParentID=AL1.ChildID AND
AL38.Data='SomeData') AND (NOT AL38.Response IS NULL))
My questions are:
1) Why isn't the "NOT AL38.Action IS NULL" statement included in the outer join in Brio? My limited understanding of the "use ODBC outer join syntax on limits" seems to indicate that it should end up there. I want the SQL to look like this, but I don't know why Brio generates this SQL.
2) How can I get Hyperion to generate the same SQL as Brio? And still use the OCE with "use ODBC outer join syntax on limits" selected?Setting the Cardinality of Department > Employee role to OptionalOne
gives rise to cartesian join (which is a bigger issue).
Therefore, the Cardinality of Department > Employee role should remain as
OptionalMany (default).
This means, the outer join problem still remains unsolved. I have, therefore,
unmarked the above answer by me.
The question is - why has Report Builder been designed in such a way that the primary entity is always the child entity when attributes are selected from both parent and child entities?
Most people desire that all the rows of the parent entity be fetched irrespective of whether there are corresponding rows in the child entity or not. Report Builder tool should not dictate what the user wants to get, meaning it is not right to assume
that the focus of the report is Employee when attributes are selected from both Department and Employee. Report Builder should not make the child entity (i.e., Employee) as the primary entity when the user selects attributes from the child entity after
having selected attributes from the parent entity.
I am sorry to say that clients may not accept the Report Builder tool as this does not fetch the records as desired.
I hope there is someone who can suggest how the outer join problem can be solved by just tweaking the properties of the report model (SMDL).
Besides, the end users are business users and are not tech savvy. They are not expected to modify queries. They would simply drag and drop attributes from entities to create adhoc reports. -
Issues with Search Filter Criteria Button in Search Help
Hi ,
I have applied an elementary search help to a select option and this help is having four fields. The search help works fne and all the four fields are visible when i do a F4. Now , if i want to restrict the number of entries shown (the number of entries are huge) by clicking the "Search Filter Criteria" button , i dont see any of the four fields using which i can restrict the data . Do we need to do any configuration for this ??
Regards
MayankHi,
in that search help itself you have a option called maximum number of hits, there is a impact if you restricted also.
Thanks & Regards,
Srinivasan.R -
LR2 hang in develop module with graduated filter
I was in the Develop module and had just used the graduated filter to draw up from the bottom of the image. When I let go of the pen, the hourglass appeared and LR stopped responding. Many minutes later, I finally gave up and clicked on the window's close button. I got the usual Windows "app is not responding" dialog and told Windows to kill lightroom.
While LR was in the hung state, I started Procmon to see if anything interesting was visible there. While I saw no activity in lightroom.exe, I did see an endless series of operations in csrss.exe. These two operations were repeated endlessly:
543751 10:32:26.2519678 PM csrss.exe 1372 RegOpenKey HKLM\Software\Policies\Microsoft\Windows\Control Panel\Desktop NAME NOT FOUND Desired Access: Read
543752 10:32:26.2519724 PM csrss.exe 1372 RegOpenKey HKU\.Default\Software\Policies\Microsoft\Windows\Control Panel\Desktop NAME NOT FOUND Desired Access: Read
After killing lightroom, I no longer saw that pair of operations.
I have no idea whether this could be related to the lightroom hang or not, but thought I would pass it on in case it provided a clue.
Running Windows XP SP2 with all updates (except SP3) applied, nVidia 7600 GT, E6700 Core 2 Duo, 4 GB RAM (3.2 GB available), plentiful hard drive space free. Catalog is new with LR2 by re-importing all images; catalog was not converted from 1.4.1.I'm having the same issue with graduated filter and adjustment brush and also one othe the predefined settings, I forgto which one, but it would lock up LR ervery time. My 30 day trial is now over and I think that I'm going to wait for LR2.x to be released :<(...
WinXP SP2, 3.0GHz Xeon 5260, 4GB, +30GB HD space -
MovieClip Filter Causing issues with EventListeners (mouseEvent.ROLL_OVER)
Hello,
I have been working on a flash photo gallery for the web. It loads thumbnails from an xml file into a loader which is then made the child of a movieclip.
The thumbnails are animated and triggered with mouse events of ROLL_OVER and ROLL_OFF. I have this working, or appearing to, when the movieclip containing the loaded thumbnail has no filters applied to it.
I want add a drop shadow on the ROLL_OVER event and remove the drop shadow on the ROLL_OFF event. I also have this working, however my problem arises when I mouse over the very edge of the movieclip. This cauese the ROLL_OVER and ROLL_OFF function to fire in rapid succession, creating a flashing dropshadow. This looks aweful and I really have no idea what would be causing this issue.
Thanks in advance for any advice!
Regards.Thanks for the reply.
I also found it difficult to believe that the filter was causing issues with the roll over/out events. I will expand on the example code you provided so you get an idea of what I am trying to accomplish and where my issues arise.
EDIT: I should add that the issue is only present when I tween AND add a filter. If I only add a filter or if I only tween I have no issues but the combination or adding a filter and tweening causes the OVER/OUT events to fire rapidly.
//This code does not result in a flashing animation
myClip.addEventListener(MouseEvent.ROLL_OVER, overClip);
myClip.addEventListener(MouseEvent.ROLL_OUT, outClip);
function overClip(e:MouseEvent):void
myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1.5 , 3, true);
myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1.5 , 3, true);
function outClip(e:MouseEvent):void
myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1 , 3, true);
myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1 , 3, true);
//However if i add these lines of code to add and remove a filter I can observe the flashing effect when the mouse is near the edge of the moveclip
myClip.addEventListener(MouseEvent.ROLL_OVER, overClip);
myClip.addEventListener(MouseEvent.ROLL_OUT, outClip);
function overClip(e:MouseEvent):void
myClip.filters = [myDropShadowFilter];
myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1.5 , 3, true);
myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1.5 , 3, true);
function outClip(e:MouseEvent):void
myClip.filters = [];
myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1 , 3, true);
myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1 , 3, true);
Is there something obviously wrong with this approach to adding a filter/tweening? I am fairly new to flash.
Thanks again!
Message was edited by: Dafunkz -
Hello,
I have an issue with my adaptive noise cancellation program. Essentially I want to input a custom wav add noise to it and then filter the noise away in order to gain the custom wav again.
While doing so I want to read the learning curve and read the adaptive coefficients. Unfortunately I have an issue when it comes to the filtering of the custom wav+noise. It won't filter the signal at all.
It would be helpful if someone could have a look at it and possibly help me out.
Thanks!
Attachments:
Testing.vi 59 KBHey Jan,
Thanks for the reply. I am currently using the Adaptive Filter Toolkit in order to obtain those VIs. The VIs which are in use are the LMS Adaptive Filter ones.
I figured there might be an error with the input of the array. This VI requires a DBL Array but it seems like it can not process it.
The "Get Wavefirn Components" works better now but I still have an issue with a time. I put a 9s wav file in but it only computes it in a very short time and I can not play the file while it is computing.
I added the modified program to the attachments.
This program is ought to read a waveform file add noise to it and then use an adaptive filter in order to get the orginal waveform back again and if possible either store or play the final waveform.
Thanks for your help.
Attachments:
Testing.vi 62 KB -
Issue with recursive join and filter records
I am having an issue with recursive join and filtering records for the following rules. The table, sample records, test script and rules are as below
drop table PC_COVKEY_PD;
create table PC_COVKEY_PD (
PC_COVKEY varchar(50),
COVERAGE_NUMBER varchar(3),
SEQUENCE_ALPHA varchar(3),
TRANSACTION_TYPE varchar(3),
COV_CHG_EFF_DATE date,
TIMESTAMP_ENTERED timestamp
delete from PC_COVKEY_PD;
commit;
Insert into PC_COVKEY_PD values ('10020335P8017MT0010012','001','001','02',to_date('01/FEB/2010','DD/MON/RRRR'),to_timestamp('02/JAN/2010 01:55:59.990216 AM','DD/MON/RRRR HH12:MI:SS.FF6 AM'));
Insert into PC_COVKEY_PD values ('10020335P8017MT0050012','005','001','02',to_date('01/FEB/2010','DD/MON/RRRR'),to_timestamp('02/JAN/2010 01:56:00.268099 AM','DD/MON/RRRR HH12:MI:SS.FF6 AM'));
Insert into PC_COVKEY_PD values ('10020335P8017MT0010032','001','003','03',to_date('14/JAN/2011','DD/MON/RRRR'),to_timestamp('14/JAN/2011 04:25:19.018217 PM','DD/MON/RRRR HH12:MI:SS.FF6 AM'));
Insert into PC_COVKEY_PD values ('10020335P8017MT0010042','001','004','03',to_date('21/JAN/2011','DD/MON/RRRR'),to_timestamp('21/JAN/2011 04:00:31.719444 PM','DD/MON/RRRR HH12:MI:SS.FF6 AM'));
Insert into PC_COVKEY_PD values ('10020335P8017MT0050022','005','002','03',to_date('21/JAN/2011','DD/MON/RRRR'),to_timestamp('21/JAN/2011 04:02:48.953594 PM','DD/MON/RRRR HH12:MI:SS.FF6 AM'));
commit;
--select * from PC_COVKEY_PD order by COV_CHG_EFF_DATE,TIMESTAMP_ENTERED;
PC_COVKEY COVERAGE_NUMBER SEQUENCE_ALPHA TRANSACTION_TYPE COV_CHG_EFF_DATE TIMESTAMP_ENTERED
10020335P8017MT0010012 001 001 02 01/FEB/2010 02/JAN/2010 01:55:59.990216 AM
10020335P8017MT0050012 005 001 02 01/FEB/2010 02/JAN/2010 01:56:00.268099 AM
10020335P8017MT0010032 001 003 03 14/JAN/2011 14/JAN/2011 04:25:19.018217 PM
10020335P8017MT0010042 001 004 03 21/JAN/2011 21/JAN/2011 04:00:31.719444 PM
10020335P8017MT0050022 005 002 03 21/JAN/2011 21/JAN/2011 04:02:48.953594 PM
*/Rule;
Every PC_COVKEY, query should recursively join and generate set of records depending on latest SEQUENCE_ALPHA for the coverage number at that point of time. For ex,
for 10020335P8017MT0010042 (4 row) should generate 2 records
1. 10020335P8017MT0010042001004 (PC_COVKEY || COVERAGE_NUMBER || latest SEQUENCE_ALPHA--004 for cover 001), SEQUENCE_ALPHA 001 for cover 001 is not the latest for 10020335P8017MT0010042.
2. 10020335P8017MT0010042005001 (coverage number 005, and latest sequence alpha-001 for cover 005).
SEQUENCE_ALPHA 002 for cover 005 is not the latest for 10020335P8017MT0010042 as it happened later stage.
for 10020335P8017MT0050022 (5 row) should generate 2 records as
1. 10020335P8017MT0050022001004 (PC_COVKEY || COVERAGE_NUMBER || latest SEQUENCE_ALPHA--004 for cover 001),
2. 10020335P8017MT0010042005002 (coverage number 005, and latest sequence alpha-002 for cover 005)
WITH SNAPSHOT_CVR_CTP as (
SELECT pcd1.PC_COVKEY,
pcd1.PC_COVKEY||pcd2.COVERAGE_NUMBER||pcd2.SEQUENCE_ALPHA as cov_key,
pcd2.COVERAGE_NUMBER,
pcd2.SEQUENCE_ALPHA,
pcd2.COVERAGE_NUMBER||pcd2.SEQUENCE_ALPHA as CVRSEQ,
max(pcd2.COVERAGE_NUMBER||pcd2.SEQUENCE_ALPHA) over (partition by pcd1.PC_COVKEY, pcd1.COVERAGE_NUMBER
order by pcd2.COV_CHG_EFF_DATE, pcd2.TIMESTAMP_ENTERED) as MaxSeq,
pcd2.COV_CHG_EFF_DATE,
pcd2.TIMESTAMP_ENTERED
FROM
PC_COVKEY_PD pcd1,
PC_COVKEY_PD pcd2
select * from SNAPSHOT_CVR_CTP SC
WHERE sc.PC_COVKEY = '10020335P8017MT0010042' -- 4 row
--AND COVERAGE_NUMBER||SC.MAXSEQ = COVERAGE_NUMBER||SEQUENCE_ALPHA
ORDER BY TIMESTAMP_ENTERED
PC_COVKEY COV_KEY COVERAGE_NUMBER SEQUENCE_ALPHA CVRSEQ MAXSEQ COV_CHG_EFF_DATE TIMESTAMP_ENTERED
10020335P8017MT0010042 10020335P8017MT0010042001001 001 001 001001 001001 01/FEB/2010 02/JAN/2010 01:55:59.990216 AM
10020335P8017MT0010042 10020335P8017MT0010042005001 005 001 005001 005001 01/FEB/2010 02/JAN/2010 01:56:00.268099 AM
10020335P8017MT0010042 10020335P8017MT0010042001003 001 003 001003 005001 14/JAN/2011 14/JAN/2011 04:25:19.018217 PM
10020335P8017MT0010042 10020335P8017MT0010042001004 001 004 001004 005001 21/JAN/2011 21/JAN/2011 04:00:31.719444 PM
10020335P8017MT0010042 10020335P8017MT0010042005002 005 002 005002 005002 21/JAN/2011 21/JAN/2011 04:02:48.953594 PM
I am trying to filter row using MAXSEQ but at the moment MAXSEQ values are not coming as expected. I expect following value for COV_KEY combination
COV_KEY MAXSEQ
10020335P8017MT0010042001001 001004
10020335P8017MT0010042005001 005001 -- match
10020335P8017MT0010042001003 001004
10020335P8017MT0010042001004 001004 -- match
10020335P8017MT0010042005002 005001Would appreciate if anyone can get MAxSEQ as expected.Something like..
with dist_cov_numbers as
select distinct coverage_number cov_number
from PC_COVKEY_PD
all_data as
select pcd.*,d.cov_number new_coverage_number,
max(decode(coverage_number,d.cov_number,sequence_alpha))
over( partition by d.cov_number
order by COV_CHG_EFF_DATE,TIMESTAMP_ENTERED
) max_seq
from PC_COVKEY_PD pcd,dist_cov_numbers d
select pc_covkey,pc_covkey||new_coverage_number||max_seq new_key,
pc_covkey||coverage_number||sequence_alpha actual_key
from all_data
order by COV_CHG_EFF_DATE, TIMESTAMP_ENTERED;
PC_COVKEY NEW_KEY ACTUAL_KEY
10020335P8017MT0010012 10020335P8017MT0010012001001 10020335P8017MT0010012001001
10020335P8017MT0010012 10020335P8017MT0010012005 10020335P8017MT0010012001001
10020335P8017MT0050012 10020335P8017MT0050012001001 10020335P8017MT0050012005001
10020335P8017MT0050012 10020335P8017MT0050012005001 10020335P8017MT0050012005001
10020335P8017MT0010032 10020335P8017MT0010032001003 10020335P8017MT0010032001003
10020335P8017MT0010032 10020335P8017MT0010032005001 10020335P8017MT0010032001003
10020335P8017MT0010042 10020335P8017MT0010042005001 10020335P8017MT0010042001004
10020335P8017MT0010042 10020335P8017MT0010042001004 10020335P8017MT0010042001004
10020335P8017MT0050022 10020335P8017MT0050022005002 10020335P8017MT0050022005002
10020335P8017MT0050022 10020335P8017MT0050022001004 10020335P8017MT0050022005002
10 rows selected Edited by: jeneesh on Nov 22, 2012 10:54 AM -
Issue with Hierarchy selection in Filter area
Hi experts,
We have an issue with BEx query selection.
Structure of Quey
1. Filter Area
=> Characteristic Relations : Restriction condition with hierarchy
2. Rows
=> Display characteristic with hierarchy active
3.Columns
=> Formula with keyfigure using sign reverse of hierarchy (formula variance).
<symptom >
When I use context menu, "Keep filter value", with the displayed hierarchy node,
and drilldown with other characteristics, the result became wrong. Filter value I kept became inactive.
Workaround I found was like belows.
1. Remove sign reverse calculation in Formula.
2. Keep sign reverse calculation and move restriction condition with hierarchy in filter area TO default values.
I wonder this symptom was right technically or bug ocurred after version upgrade or something.
Thanks in advance.
BEx BI Addon 7.X(based on 710)/SP11 Revision 634Hi
This depends on the logical database that the report is based on. Secondly I have experienced that the report variant overwrites the date selections and therefore it looks like that the dates are not parsed (which I think is your problem).
For e.g. logical PHP and PHPCE both the period and data dates are filled with the data selection from the portal. (check on the report attributes in SE38 which logical DB used) For e.g. PTRVP (travel) no date are passed at all in the call of the report!!
To make sure that the report variant isnu2019t overwriting I normally set the variant for the report to u201CSave field without valuesu201D for the date selection periods and then it isnu2019t filled by the variant.
Data selection period
Data selection period: Start
Data selection period: End
Employee selection period
Employee selection period: Start
Employee selection period: End
Regards,
Lars -
Issue with presentation variables, dashboard prompt and filter
Dear Guru's,
I have a question about constraining a request with presentation variable set by a dashboard prompt. I have a dashboard prompt, that stores its value in a presentation variable . The prompt is about region. When the dashboard opens, the default of the prompt is all choices and it needs to show my reports with "All Choices". I've created the following filter on my two reports on the dashboard:
"Dim Student"."Region" = '@{variables.GILLES}'
or '@{variables.GILLES}' IS NULL
One report is just the column "Dim Student"."Region" (to see if it works) and with this report the above filter works just fine. When nothing is prompted it shows "All Choices" when a choice is made the report responds accordingly.
BUT
The second report on my dash with the same region column, but extended with some time dimension columns and a measure gives an error which I'm not able to solve.
+State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14023] None of the fact sources for ToDate(# Feitelijke Instroom:[DAggr(Feit Instroom en Uitstroom Opleidingen.# Feitelijke Instroom by [ Dim Tijd.Maand Omschrijving, Dim Tijd.Maand Nummer, Dim Tijd.Jaar, Dim Kwalificatie.Kwalificatie Niveau, Dim Leerling.RCBREGIO Regio] )], [Level JAAR]) are compatible with the detail filter [Dim Tijd.Maand Nummer = 3, Dim Tijd.Jaar = 2010].+
+(HY000)SQL Issued: SELECT "Dim Tijd".Jaar saw_0, "Dim Tijd"."Maand Nummer" saw_1, "Dim Tijd"."Maand Omschrijving" saw_2, "Dim Kwalificatie"."Kwalificatie Niveau" saw_3, "Dim Leerling"."RCBREGIO Regio" saw_4, "Feit Instroom en Uitstroom Opleidingen"."# Feitelijke Instroom Cumulatief" saw_5, REPORT_SUM(saw_5 BY saw_0, saw_1, saw_2) FROM repos_x WHERE ("Dim Tijd".Jaar = 2010) AND ("Dim Tijd"."Maand Nummer" = 3) AND (("Dim Leerling"."RCBREGIO Regio" = 'Noord-Oost') OR ('Noord-Oost' IS NULL)) ORDER BY saw_0, saw_1, saw_2, saw_3, saw_4+
While the exact same report but without the "or '@{variables.GILLES}' IS NULL" doesn't throw any errors but doesn't show the "all choices" by default.
The ultimate goal to achieve is to build a dashboard with several reports from several subject areas with one single prompt that opens default with "all choices" and constrains the reports accordingly.
Any help is highly appreciated.
Kind Regards,
GillesPhani,
I know "All Choices" is a special value and that it doesn't represent NULL. My filter construction seems to work fine.
My filter condition:
"Dim Student"."Region" = '@{variables.GILLES}'
or '@{variables.GILLES}' IS NULL
When it's set by the prompt it filters the request accordingly (first condition evaluates to true), when it's not set the second condition evaluates to true and shows all the results (or it's not filtered).
The problem is that it doesn't work when time dimensions are combined with this filter. Then it throws the error mentioned in the first post.
By the way: your suggested solution doesn't work. -
Issue with LPCOR on CME 10.5
Dear All,
I am facing issues with LPCOR configuration on CME 10.5. For International calls the Authentication Prompts triggers some times and some times doen not.
Also when a local call is dialed the Authentication Prompt is triggered some times.Below is the config and debug logs. Need your help to resolve this.
voice lpcor enable
voice lpcor custom
group 10 endusers
group 11 pstn
voice lpcor policy endusers
service fac
accept endusers fac
accept pstn fac
voice lpcor policy pstn
service fac
accept endusers fac
accept pstn fac
application
package auth
param passwd-prompt flash:enter_pin.au
param max-retries 0
param abort-digit *
param term-digit #
param user-prompt flash:enter_account.au
param passwd 12345
param max-digits 32
interface GigabitEthernet0/1.1
encapsulation dot1Q 1 native
ip address 10.25.76.1 255.255.255.0
interface GigabitEthernet0/1.201
encapsulation dot1Q 201
ip address 10.25.77.1 255.255.255.0
voice-port 0/0/0
lpcor outgoing pstn
trunk-group ALL_FXO 1
supervisory disconnect dualtone mid-call
supervisory custom-cptone 2n-gsm
no battery-reversal
input gain -6
output attenuation -3
cptone SA
timeouts call-disconnect 1
timeouts wait-release 1
timing sup-disconnect 50
connection plar 5040
caller-id enable
cable-detect
dial-peer cor custom
name local
name longdistance
name 911
name Internal
name fac-int
name user-fac
dial-peer cor list local
member local
dial-peer cor list call-local
member local
dial-peer cor list call-longdistance
member longdistance
dial-peer cor list user1
member local
member 911
dial-peer cor list user2
member local
member longdistance
member 911
member user-fac
dial-peer cor list user3
member 911
dial-peer cor list call-911
member 911
dial-peer cor list call-internal
member Internal
dial-peer cor list fac-int
member local
member 911
member fac-int
dial-peer cor list user-fac
member user-fac
dial-peer voice 96 pots
trunkgroup ALL_FXO
corlist outgoing call-911
destination-pattern 9[2-6]......
forward-digits 7
dial-peer voice 901 pots
trunkgroup ALL_FXO
corlist outgoing call-911
destination-pattern 901[2-4,6-8].......
forward-digits 10
dial-peer voice 800 pots
trunkgroup ALL_FXO
destination-pattern 9800T
prefix 800
dial-peer voice 900 pots
destination-pattern 9T
port 0/0/3
prefix 9
dial-peer voice 11 pots
destination-pattern 901........
port 0/0/3
forward-digits 10
dial-peer voice 9051 pots
trunkgroup ALL_FXO
corlist outgoing call-local
destination-pattern 905........
forward-digits 10
dial-peer voice 19 pots
trunkgroup ALL_FXO
corlist outgoing fac-int
destination-pattern 900T
translate-outgoing called 1
forward-digits all
dial-peer voice 20 voip
description International calling
service clid_authen_collect
destination-pattern 900T
lpcor outgoing pstn
session target ipv4:10.25.76.1
incoming called-number 9T
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
ephone-dn 1
number 4121
name John
corlist incoming fac-int
ephone 1
lpcor type local
lpcor incoming endusers
mac-address E0D1.730A.21DE
ephone-template 2
type 7942
button 1:1
voice register dn 33
number 4163
call-forward b2bua busy 5000
call-forward b2bua noan 5000 timeout 20
call-forward b2bua unregistered 5000
allow watch
name Joseph
mwi
voice register pool 33
busy-trigger-per-button 4
id mac BC67.1C31.C8AA
type 7821
number 1 dn 33
cor incoming fac-int 1 4163
dtmf-relay rtp-nte
codec g711ulaw
transfer max-length 4
Debug Logs
DAMAC-CME-ANOUD#DEBUg VOIce lpcor all
voip lpcor all debugging is on
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#term
DAMAC-CME-ANOUD#terminal i
DAMAC-CME-ANOUD#terminal i
Apr 12 16:22:39.825: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId F692C420E06611E4BB0CE7FDC5486EA5, SetupTime 16:22:35.615 UTC Sun Apr 12 2015, PeerAddress 4130, PeerSubAddress , DisconnectCause 10 , DisconnectText normal call clearing (16), ConnectTime 16:22:39.825 UTC Sun Apr 12 2015, DisconnectTime 16:22:39.825 UTC Sun Apr 12 2015, CallOrigin 2, ChargedUnits 0, InfoType 2, TransmitPackets 0, TransmitBytes 0, ReceivePackets 0, ReceiveBytes 0
Apr 12 16:22:39.825: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:TWC,ft:04/12/2015 16:22:35.609,cgn:4130,cdn:,frs:0,fid:2599,fcid:F692C420E06611E4BB0CE7FDC5486EA5,legID:284C,bguid:F692C420E06611E4BB0CE7FDC5486EA5mon
DAMAC-CME-ANOUD#terminal imon
^
% Invalid input detected at '^' marker.
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
Apr 12 16:22:44.089: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_name:
lpcor endusers
Apr 12 16:22:44.089: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_name:
lpcor endusers index 10
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#show debug
VOIP LPCOR:
debug voip lpcor error call is ON (filter is OFF)
debug voip lpcor error call informational is ON (filter is OFF)
debug voip lpcor error software is ON
debug voip lpcor error software informational is ON
debug voip lpcor detail is ON (filter is OFF)
debug voip lpcor function is ON (filter is OFF)
debug voip lpcor inout is ON (filter is OFF)
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
Apr 12 16:23:22.889: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId FBA1532AE06611E4BB10E7FDC5486EA5, SetupTime 16:22:44.089 UTC Sun Apr 12 2015, PeerAddress 4130, PeerSubAddress , DisconnectCause 10 , DisconnectText normal call clearing (16), ConnectTime 16:23:02.009 UTC Sun Apr 12 2015, DisconnectTime 16:23:22.889 UTC Sun Apr 12 2015, CallOrigin 2, ChargedUnits 0, InfoType 2, TransmitPackets 0, TransmitBytes 0, ReceivePackets 1038, ReceiveBytes 166080
Apr 12 16:23:22.889: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:TWC,ft:04/12/2015 16:22:44.093,cgn:4130,cdn:,frs:0,fid:2600,fcid:FBA1532AE06611E4BB10E7FDC5486EA5,legID:284D,bguid:FBA1532AE06611E4BB10E7FDC5486EA5
Apr 12 16:23:22.905: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId FBA1532AE06611E4BB10E7FDC5486EA5, SetupTime 16:22:57.795 UTC Sun Apr 12 2015, PeerAddress 0097150107659, PeerSubAddress , DisconnectCause 10 , DisconnectText normal call clearing (16), ConnectTime 16:23:02.015 UTC Sun Apr 12 2015, DisconnectTime 16:23:22.905 UTC Sun Apr 12 2015, CallOrigin 1, ChargedUnits 0, InfoType 2, TransmitPackets 1038, TransmitBytes 174384, ReceivePackets 1043, ReceiveBytes 166880
Apr 12 16:23:22.905: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:TWC,ft:04/12/2015 16:22:57.785,cgn:4130,cdn:0097150107659,frs:0,fid:2601,fcid:FBA1532AE06611E4BB10E7FDC5486EA5,legID:284E,bguid:FBA1532AE06611E4BB10E7FDC5486EA5
Apr 12 16:23:25.317: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_name:
lpcor endusers
Apr 12 16:23:25.317: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_name:
lpcor endusers index 10
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#un all
All possible debugging has been turned off
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#!ok just send me these logs
DAMAC-CME-ANOUD#!i have to move from here
Apr 12 16:24:02.153: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId 14343755E06711E4BB16E7FDC5486EA5, SetupTime 16:23:25.323 UTC Sun Apr 12 2015, PeerAddress 4130, PeerSubAddress , DisconnectCause 10 , DisconnectText normal call clearing (16), ConnectTime 16:23:43.393 UTC Sun Apr 12 2015, DisconnectTime 16:24:02.153 UTC Sun Apr 12 2015, CallOrigin 2, ChargedUnits 0, InfoType 2, TransmitPackets 0, TransmitBytes 0, ReceivePackets 930, ReceiveBytes 148800
Apr 12 16:24:02.153: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:Tnow
DAMAC-CME-ANOUD#\WC,ft:04/12/2015 16:23:25.321,cgn:4130,cdn:,frs:0,fid:2602,fcid:14343755E06711E4BB16E7FDC5486EA5,legID:2850,bguid:14343755E06711E4BB16E7FDC5486EA5
Apr 12 16:24:02.169: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId 14343755E06711E4BB16E7FDC5486EA5, SetupTime 16:23:39.169 UTC Sun Apr 12 2015, PeerAddress 0097150107659, PeerSubAddress , DisconnectCause 10 , DisconnectText normal call clearing (16), ConnectTime 16:23:43.389 UTC Sun Apr 12 2015, DisconnectTime 16:24:02.169 UTC Sun Apr 12 2015, CallOrigin 1, ChargedUnits 0, InfoType 2, TransmitPackets 930, TransmitBytes 156240, ReceivePackets 937, ReceiveBytes 149920
Apr 12 16:24:02.169: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:TWC,ft:04/12/2015 16:23:39.169,cgn:4130,cdn:0097150107659,frs:0,fid:2603,fcid:14343755E06711E4BB16E7FDC5486EA5,legID:2851,bguid:14343755E06711E4BB16E7FDC5486EA5We have come across this issue today in 10.9.5 (so affects 10.9.4 as well) but it was occurring in Sydney as well with a client and for me in Melbourne.
-
Issue with heat maps refresh process in EID 3.1?
Issue with Heat Maps in EID 3.1? Heats maps don't refresh unless you go back to home page and then again go back to the Endeca app.
In Oracle Sample app if we open the Map tab we will see that Milwaukee is really hot in the heat map. now if we filter the data to just show data from 100 miles within Orlando, FL then the map will get refreshed to show that area but the colors on heat maps do not change.
Now if we keep the refinements same and go back to home page and again go back to sample app and maps tabs then it will still show area of 100 miles within Orlando, FL which is good but now heat map would have updated and it would show us correct color.
Now if we remove the refinement then it would show complete US map as hot which is again wrong.
I have observed this issue in chrome browser as well as firefox.
Is there anyway to overcome this issue?This issue was resolved after applying latest patch from Oracle.
-
Performance issues with dynamic action (PL/SQL)
Hi!
I'm having perfomance issues with a dynamic action that is triggered on a button click.
I have 5 drop down lists to select columns which the users want to filter, 5 drop down lists to select an operation and 5 boxes to input values.
After that, there is a filter button that just submits the page based on the selected filters.
This part works fine, the data is filtered almost instantaneously.
After this, I have 3 column selectors and 3 boxes where users put values they wish to update the filtered rows to,
There is an update button that calls the dynamic action (procedure that is written below).
It should be straight out, the only performance issue could be the decode section, because I need to cover cases when user wants to set a value to null (@) and when he doesn't want update 3 columns, but less (he leaves '').
Hence P99_X_UC1 || ' = decode(' || P99_X_UV1 ||','''','|| P99_X_UC1 ||',''@'',null,'|| P99_X_UV1 ||')
However when I finally click the update button, my browser freezes and nothing happens on the table.
Can anyone help me solve this and improve the speed of the update?
Regards,
Ivan
P.S. The code for the procedure is below:
create or replace
PROCEDURE DWP.PROC_UPD
(P99_X_UC1 in VARCHAR2,
P99_X_UV1 in VARCHAR2,
P99_X_UC2 in VARCHAR2,
P99_X_UV2 in VARCHAR2,
P99_X_UC3 in VARCHAR2,
P99_X_UV3 in VARCHAR2,
P99_X_COL in VARCHAR2,
P99_X_O in VARCHAR2,
P99_X_V in VARCHAR2,
P99_X_COL2 in VARCHAR2,
P99_X_O2 in VARCHAR2,
P99_X_V2 in VARCHAR2,
P99_X_COL3 in VARCHAR2,
P99_X_O3 in VARCHAR2,
P99_X_V3 in VARCHAR2,
P99_X_COL4 in VARCHAR2,
P99_X_O4 in VARCHAR2,
P99_X_V4 in VARCHAR2,
P99_X_COL5 in VARCHAR2,
P99_X_O5 in VARCHAR2,
P99_X_V5 in VARCHAR2,
P99_X_CD in VARCHAR2,
P99_X_VD in VARCHAR2
) IS
l_sql_stmt varchar2(32600);
p_table_name varchar2(30) := 'DWP.IZV_SLOG_DET';
BEGIN
l_sql_stmt := 'update ' || p_table_name || ' set '
|| P99_X_UC1 || ' = decode(' || P99_X_UV1 ||','''','|| P99_X_UC1 ||',''@'',null,'|| P99_X_UV1 ||'),'
|| P99_X_UC2 || ' = decode(' || P99_X_UV2 ||','''','|| P99_X_UC2 ||',''@'',null,'|| P99_X_UV2 ||'),'
|| P99_X_UC3 || ' = decode(' || P99_X_UV3 ||','''','|| P99_X_UC3 ||',''@'',null,'|| P99_X_UV3 ||') where '||
P99_X_COL ||' '|| P99_X_O ||' ' || P99_X_V || ' and ' ||
P99_X_COL2 ||' '|| P99_X_O2 ||' ' || P99_X_V2 || ' and ' ||
P99_X_COL3 ||' '|| P99_X_O3 ||' ' || P99_X_V3 || ' and ' ||
P99_X_COL4 ||' '|| P99_X_O4 ||' ' || P99_X_V4 || ' and ' ||
P99_X_COL5 ||' '|| P99_X_O5 ||' ' || P99_X_V5 || ' and ' ||
P99_X_CD || ' = ' || P99_X_VD ;
--dbms_output.put_line(l_sql_stmt);
EXECUTE IMMEDIATE l_sql_stmt;
END;Hi Ivan,
I do not think that the decode is performance relevant. Maybe the update hangs because some other transaction has uncommitted changes to one of the affected rows or the where clause is not selective enough and needs to update a huge amount of records.
Besides that - and I might be wrong, because I only know some part of your app - the code here looks like you have a huge sql injection vulnerability here. Maybe you should consider re-writing your logic in static sql. If that is not possible, you should make sure that the user input only contains allowed values, e.g. by white-listing P99_X_On (i.e. make sure they only contain known values like '=', '<', ...), and by using dbms_assert.enquote_name/enquote_literal on the other P99_X_nnn parameters.
Regards,
Christian -
Performance Issues with Photoshop CS6 64-Bit
Hello -
Issue at hand: over the course of the last few weeks, I have noticed significant issues with performance since the last update to PS CS6 via the Adobe Application Manager, ranging from unexpected shut downs to bringing my workstation to a crawl (literally, my cursor seems to crawl across my displays). I'm curious as to if anyone else is experiencing these issues, or if there is a solution I have not yet tried. Here is a list of actions that result in these performance issues - there are likely more that I have either not experienced due to my frustration, or have not documented as occuring multiple times:
Opening files - results in hanging process, takes 3-10 seconds to resolve
Pasting from clipboard - results in hanging process, takes 3-10 seconds to resolve
Saving files - takes 3-10 seconds to open the dialog, another 3-10 seconds to return to normal window (saving a compressed PNG)
Eyedropper tool - will either crash Photoshop to desktop, or take 5-15 seconds to load
Attempting to navigate any menu - will either crash Photoshop to desktop, or take 5-15 seconds to load
Attempts I've taken to resolve this matter, which have failed:
Uninstalled all fonts that I have added since the last update (this was a pain in the ***, thank you Windows explorer for being glitchy)
Uninstall application and reinstall application
Use 32-bit edition
Changing process priority to Above Normal
Confirm process affinity to all available CPU cores
Change configuration of Photoshop performance options
61% of memory is available to Photoshop to use (8969 MB)
History states: 20; Cache levels: 6; Cache tile size: 1024K
Scratch disks: active on production SSD, ~10GB space available
Dedicated graphics processor is selected (2x nVidia cards in SLI)
System Information:
Intel i7 2600K @ 3.40GHz
16GB DDR3, Dual Channel RAM
2x nVidia GeForce GTS 450 cards, 1GB each
Windows 7 Professional 64-bit
Adobe Creative Cloud
This issue is costing me time I could be working every day, and I'm about ready to begin searching for alternatives and cancel my membership if I can't get this resolved.Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3392 MHz
Built-in memory: 16350 MB
Free memory: 12070 MB
Memory available to Photoshop: 14688 MB
Memory used by Photoshop: 61 %
Image tile size: 1024K
Image cache levels: 6
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.1 CUDA 4.2.1
OpenGL Version: 3.0
Video Rect Texture Size: 16384
OpenGL Memory: 1024 MB
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTS 450/PCIe/SSE2
Display: 2
Display Bounds: top=0, left=1920, bottom=1080, right=3840
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Video Card Number: 3
Video Card: NVIDIA GeForce GTS 450
Driver Version: 9.18.13.1106
Driver Date: 20130118000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode:
Video Card Caption: NVIDIA GeForce GTS 450
Video Card Memory: 1024 MB
Video Card Number: 2
Video Card: LogMeIn Mirror Driver
Driver Version: 7.1.542.0
Driver Date: 20060522000000.000000-000
Video Card Driver:
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: LogMeIn Mirror Driver
Video Card Memory: 0 MB
Video Card Number: 1
Video Card: NVIDIA GeForce GTS 450
Driver Version: 9.18.13.1106
Driver Date: 20130118000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTS 450
Video Card Memory: 1024 MB
Serial number: 90970233273769828003
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\ANDREW~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 111.8G, 7.68G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
ACE.dll ACE 2012/06/05-15:16:32 66.507768 66.507768
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/09/10-12:31:21 5.0.4 79.517869
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 7.0.0.1686
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/06/05-15:16:32 66.507768 66.507768
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/06/05-15:16:32 66.507768 66.507768
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/06/05-15:16:32 66.507768 66.507768
BIBUtils.dll BIBUtils 2012/06/05-15:16:32 66.507768 66.507768
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.1.0.20577 2.1.0.20577
CoolType.dll CoolType 2012/06/05-15:16:32 66.507768 66.507768
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 2.1.2.1681
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
Required plug-ins:
3D Studio 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
Angled Strokes 13.0
Average 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 8.1
Camera Raw Filter 8.1
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Collada 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Embed Watermark 4.0
Entropy 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Extrude 13.0
FastCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Maximum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Mean 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Measurement Core 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Median 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Mezzotint 13.0
Minimum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
MMXCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Picture Package Filter 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Pinch 13.0
Pixar 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Range 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.1.2
Shear 13.0
Skewness 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
STL 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Sumi-e 13.0
Summation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
Underpainting 13.0
Vanishing Point 13.0
Variance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Variations 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
WIA Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
Wind 13.0
Wireless Bitmap 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONE
Maybe you are looking for
-
I want to add a new language for peoplesoft. For example: I want to add the simple Chinese to the HRCS system. It stops at somewhere, and then I want to do it again, so I kill the old process and then use data mover to add the language. It will tell
-
I can't activate face time & iMessages on my iPad mini ?
I've bought a new iPad mini . And when I try to activate face time & iMessages , with my apple id I get this message " the Username or password was incorrect Try again " knowing I'm sure that e-mail and password are correct , I use them every day t
-
How do you turn off a single display when running two by software?
so, i just bought a vizio 47" 1080p lcd tv and am very impressed with how good it looks connected to my imac with a dvi to hdmi cable. the problem is that sometimes i want to turn off the imac's screen because it can get distracting. any ideas?? than
-
Deployment fails with "The system cannot find the path specified" message
So, here's my sob story. I'm running Sun App Server 7 on Windows 2000. Occasionally, when I used asadmin.bat to deploy an ear I get an error message saying "The system cannot find the path specified" . Stopping and restarting the server and running t
-
10.6.2 upgrade killed software RAID 0 for my Mac Pro - can it be recovered?
I have 4 internal SATA drives in my Mac Pro, one is the boot device, one is the time machine device, the remaining two drives are set up as striped disks (RAID0). When upgrading from 10.6.1 to 10.6.2, my RAID set was killed by the upgrade process. I