Issue with Document Properties/Security

I used adobe 8 proffesional to create a pdf form that I want digitally signed. 
When I preview, I am able to add a digital signature and Document Properties/Security it indicates signature allowed. 
When I open the document in Adobe Reader.  I cannot sign. 
Document Properties/Security state Signing:  not allowed.   We are not using Echo.  Help!

Per John T. Smith's comments, I will Move your post to the Adobe Acrobat Forum, where you will likely get directly help.
Your links, and any e-mail subscriptions will follow.
Good luck,
Hunt

Similar Messages

  • Auto adjustment of page orientation causes printing issues with documents that have a page width greater than its page height.

    Hi,
    Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
    documents that have a page width greater than its page height.
    In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
    In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
    Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
    This behaviour causes printing problems: the page prints out 90° rotated.
    I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
    Word 2010 seems to force the page orientation settings.
    Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
    This is very annoying, since we have to print official documents of a municipality (driver's licences).
    Is there a workaround for this issue?
    Regards,
    Laurent Grandgaignage
    Sysadmin Gemeentebestuur Stabroek, Belgium

    Hi
    Thank you for using
    Microsoft Office for IT Professionals Forums.
    From your description, we can follow these steps to test this issue
    Step 1: Repair Office 2010
    1.      
    Click
    Start, and then click Control Panel.
    2.      
    Click
    Programs and Features.
    3.      
    Click the
    Office 2010 program that you want to repair, and then click
    Change.
    4.      
    Click
    Repair, and then click Continue. You might need to restart your computer after the repair is complete.
    Step 2:
    Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
    Windows Vista and Windows 7
    a)      
    Exit Word 2010
    b)      
    Click
    Start.
    c)       
    In the
    Start Search box, type the following text, and then press
    ENTER:
    1.      
    %userprofile%\appdata\roaming\microsoft\templates
    d)      
    Right-click
    Normal.dotm, and then click Rename.
    e)      
    Type
    Oldword.old, and then press ENTER.
    Microsoft Windows XP
    a)      
    Exit Word 2010
    b)      
    Click
    Start, and then click Run.
    c)       
    In the
    Open box, type the following text, and then press ENTER:
    %userprofile%\Application Data\Microsoft\Templates
    d)      
    Right-click
    Normal.dotm, and then click Rename.
    e)      
    Type
    Oldword.old, and then press ENTER.
    f)       
    Close Windows Explorer.
    How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
    http://support.microsoft.com/kb/826845
    Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
    I can do for you, please feel free to let me know.
    Hope that helps.
    Sincerely
    William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Issue with Print Properties button not responding in Adobe Reader 10.1.10

    We've recently been upgrading Adobe Reader 9.4.4 to 10.1.10 and started having a few reports of the Print -> Properties box in Adobe Reader not responding.  When this happens Adobe Reader will crash if you click on the Print button.  If you go into Devices and Printers and try and access the Printer Properties you are prompted to install the driver for the device.  It does seem to be quite random, it will work fine for days and the suddenly happen.  I've done testing and have been able to get it happen by opening Outlook, Word or Excel but it is completely hit and miss.  Sometimes the issue will happen and other times no matter how many times you open and close the various applications it's fine. 
    Fortunately it only seems to be an issue when accessing Properties, if you just print there are no options which is probably why we don't have more complaints.  Unfortunately this didn't come to light until we'd rolled it out to 2000+ machines across 8 locations.
    So far I've tried the following:
    1. Upgraded to Adobe Reader 11.0.9 and same issue
    2. Created a test print queue using a different print driver (my machine has a different driver again and is using a different print server)
    3. Uninstalled a number of applications that have caused us issues with Office 2010 due to dodgy addins (Workshare and HP Filesite)
    4. Rolled back to 9.4.4 and seems OK.  Problem here is that they receive PDFs in formats not compatible with older than X.
    System is Windows 7 Enterprise SP1 32bit, Office Professional 2010, printing is to Ricoh Equitrac (Follow You)
    Anyone have a fix for this or come across this before.  I'm going to try testing with a Postscript driver to see if that helps, which is the last item on Adobe's troubleshooting list.

    Select a PDF file, CMD+I, check the Open With section, and ensure that AR is selected. If not, then select it and click on the Change All button. Alternatively, select Preview, which is my default PDF reader.

  • Windows 8 64 bit issues with Cisco AnyConnect Secure Mobility Client version 3.1.04072

    I am having an issue with the Cisco AnyConnect Secure Mobility Client version 3.1.04072 on a Windows 8 64 bit laptop.
    I am able to create the VPN connection but the connection will not allow data to be transferred.
    Stats from a manual connection:
    Cisco AnyConnect Secure Mobility Client Version 3.1.04072
    VPN Stats
        Bytes Received:  14375
        Bytes Sent:  0
        Compressed Bytes Received:  0
        Compressed Bytes Sent:  0
        Compressed Packets Received:  0
        Compressed Packets Sent:  0
        Control Bytes Received:  0
        Control Bytes Sent:  0
        Control Packets Received:  0
        Control Packets Sent:  0
        Encrypted Bytes Received:  7820
        Encrypted Bytes Sent:  1207
        Encrypted Packets Received:  9
        Encrypted Packets Sent:  3
        Inbound Bypassed Packets:  0
        Inbound Discarded Packets:  0
        Outbound Bypassed Packets:  0
        Outbound Discarded Packets:  0
        Packets Received:  4
        Packets Sent:  0
        Time Connected:  00:03:01
    Protocol Info
        Inactive Protocol
            Protocol Cipher:  RSA_3DES_168_SHA1
            Protocol Compression:  None
            Protocol State:  Disconnected
            Protocol:  DTLS
        Active Protocol
            Protocol Cipher:  RSA_3DES_168_SHA1
            Protocol Compression:  Deflate
            Protocol State:  Connected
            Protocol:  TLS
    OS Version
        Windows 8 : WinNT 6.2.9200
    Log from the data transmission software:
    24/12/2013 12:51:13 - Application version = 1.11.28.0
    24/12/2013 12:51:13 - Lodgement Library Version =  1.11.28.0
    24/12/2013 12:51:13 - Connection Method =  INTERNET
    24/12/2013 12:51:13 - DIS Connection Type = Automatic
    24/12/2013 12:51:13 - VPN Client =  ACTIVE
    24/12/2013 12:51:13 - Check Available Connections =  NOT ACTIVE
    24/12/2013 12:51:13 - Windows 8 (6.2.9200 SP )
    24/12/2013 12:51:13 - Language: English (Australia)
    24/12/2013 12:51:13 -
    24/12/2013 12:51:13 - Connected to ISP via LAN
    24/12/2013 12:51:13 - Checking for presence of VPN client.
    24/12/2013 12:51:13 - VPN client found. (C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\vpncli.exe)
    24/12/2013 12:51:13 - The Cisco AnyConnect Secure Mobility Client application is in use.
    24/12/2013 12:51:18 - Terminating Cisco AnyConnect Secure Mobility Client in progress ...
    24/12/2013 12:51:18 -
    24/12/2013 12:51:18 - Checking Cisco AnyConnect  version.
    24/12/2013 12:51:19 - Cisco AnyConnect Secure Mobility Client (version 3.1.04072) .
    24/12/2013 12:51:19 - Copyright (c) 2004 - 2013 Cisco Systems, Inc.  All Rights Reserved.
    24/12/2013 12:51:19 - Config file directory:C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\
    24/12/2013 12:51:19 -
    24/12/2013 12:51:19 - Loading profile:C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\ELS-IMelAde-TCP.xml
    24/12/2013 12:51:19 -
    24/12/2013 12:51:19 - Initializing the VPN connection.
    24/12/2013 12:51:19 - Ready to connect.
    24/12/2013 12:51:19 - Ready to connect.
    24/12/2013 12:51:19 - Contacting ELS-IMelAde-TCP.
    24/12/2013 12:51:23 - Authenticating user.
    24/12/2013 12:51:23 - Connected to VPN concentrator.
    24/12/2013 12:51:23 - Establishing VPN session...
    24/12/2013 12:51:23 - Checking for profile updates...
    24/12/2013 12:51:23 - Checking for product updates...
    24/12/2013 12:51:23 - Checking for customization updates...
    24/12/2013 12:51:23 - Performing any required updates...
    24/12/2013 12:51:23 - Establishing VPN session...
    24/12/2013 12:51:23 - Establishing VPN - Initiating connection...
    24/12/2013 12:51:24 - Establishing VPN - Examining system...
    24/12/2013 12:51:24 - Establishing VPN - Activating VPN adapter...
    24/12/2013 12:51:24 - Establishing VPN - Configuring system...
    24/12/2013 12:51:24 - Establishing VPN...
    24/12/2013 12:51:24 - Connected to VPN concentrator.
    24/12/2013 12:51:24 - Connected to ELS-IMelAde-TCP.
    24/12/2013 12:51:24 - Connected to VPN concentrator.
    24/12/2013 12:51:24 - Connection to VPN client return code = 0.
    24/12/2013 12:51:24 - Connected to VPN concentrator.
    24/12/2013 12:51:24 - Connecting : Connecting to 203.202.43.2.
    24/12/2013 12:51:45 - Error in ConnectToDIS - Socket Error # 10060
    Connection timed out.
    24/12/2013 12:51:46 -
    24/12/2013 12:51:46 - Disconnecting from the VPN concentrator.
    24/12/2013 12:51:46 - Disconnect in progress, please wait...
    24/12/2013 12:51:46 - Detaching AnyConnect, please wait...
    24/12/2013 12:51:47 - Detached.
    24/12/2013 12:51:47 - Disconnected from VPN concentrator.
    24/12/2013 12:51:47 - *****************************************************
    24/12/2013 12:51:47 -               END OF LODGEMENT PROCESS
    24/12/2013 12:51:47 - *****************************************************
    Issue history:
    - Previously running Cisco VPN client on Windows 8 64 bit laptop (VPN working and able to transmit data over VPN)
    - Upgrade to Windows 8.1 stopped the VPN client working
    - Refreshed system back to Windows 8 and reinstalled all software
    - Cisco VPN client would not install on system
    - Cisco AnyConnect Secure Mobility Client installs and is able to connect to VPN host
    - Cisco AnyConnect Secure Mobility Client downloads and installs software from VPN host
    - Data transmission software returns error code #10060
    Any assistance would be greatly appreciated.

    anyone found the fix for this?

  • Issue with document text - converting from PDF to Word

    I have used Adobe Reader in the past with no issues.  Today, I tried to convert a PDF to a word document.  It worked, but the text all changed to wingdings font (even though it says it is Calibri).  Any suggestions?

    Hi marleighp23001196,
    Are you facing this issue with a specific file or with other word files too?
    Regards,
    Rahul

  • Clasification with Document Properties

    Hi,
    I´m stock in creating a Clasification for my Documents, I have added in the System Administration -> System Configuration -> Knowledge Management -> Configuration
    -> Content Management -> User Interface -> Search -> Search Options Set > UISearch > 'Allowed Sort Properties'
    the property Departamento as mandatory and indexable..... , and when I try to modify a document (i.e the description) then it sends this error message
    "Enter values for these mandatory properties: Departamento"
    But I can not see the property.
    I´m alittle confused on how to assign new properties to a Document and then with this properties Clasificate in Catgegories de Documents.
    Can some one guide me throug this process?
    Thanx in Advanced!
    Gerardo J

    Hi Gerardo,
    have you assigned your property to a property group and a property structure? Then you have to add you property structure to 'all_groups'. After that, you will be able to maintain a value for this property. Please have a look at this: http://help.sap.com/saphelp_nw04/helpdata/en/3d/51812c9ba14f4fa104fe3971d5507b/frameset.htm.
    After that, you can create a taxonomy. Explanations can be found here: http://help.sap.com/saphelp_nw04/helpdata/en/bf/a17a3cd15211d6b2c700508b6b8a93/frameset.htm
    Hope this helps
    Karin

  • Issue with Web Service Security

    Dear Forum Members and Readers,
    I am a beginner to Web Services, and facing an issue with WS-Security.
    My issue seemingly is quite specific to my projects though, It will be great if you can provide me your views.
    Context Description:
    I am developing a Java Web Service application that is deployed on JBoss Application Server.
    This application will communicate with two other applications those are not deployed in same JBoss Application Server.
    These 2 applications are third party applications, one is C++ based web services and other is Java based web services.
    My application gives a call to Third Party Application1 and receives the response back form it. It then passes this received response to Third Party Application 2.
    Issue Description:
    I now need to enable https paradigm among these 3 applications. (I need to implement web service security model here)
    I started with looking in to JBoss specific WS-Security but found it not suitable in my case, as it requires to configure both the client and server. I have the control over my application but not on other 2 third party applications.
    To this extent, I am unable to identify a solution that can address my issue.
    Can anybody please provide me with initial thoughts or any reference material that might help me to give this a start.
    Any clue will be highly appreciated!
    Thanks in advance
    Mukul

    mukul.object wrote:
    Actually, my SOAP messages contains some critical information that needs to be encrypted.You think that its critical information however your third party doesn't. If they would have had same thought they would have enabled the security. As I said earlier, you will have to discuss this with them.
    Another solution (however I don't know the viability in your case) could be to deploy one component before each third party service. Your web service will call this new component (Which is installed in their environment i.e. local to third party web service) and new component will forward the request to third party service. Now you can apply security/encryption/decryption between your web service and your component.
    I have had a look in to XMLEncrytion using that I can encrypt my SOAP messages but I wonder how would other tools decrypt that.My above comments answers this.
    Is there anyway I can encrypt my SOAP messages (without having to customize third party tools) in this scenario ??My above comments answers this.

  • Withholding Tax on Advance paid having issues with Document splitting

    Dear Experts
    Our client deducts TDS on the Advance amount paid and on posting of Invoices from the Vendors. The documents are posted with withholding Tax types configured for these purpose in F-48 and FB60 respectively. Document splitting has been activated in the system with all required configuration.
    The problem arises when we try to clear the advance amount against the Invoice along with the balance payment in F-53 if the invoice has more than one expense line posted to different Cost Centers in FB60. The system gives an error message " Balancing field "Profit Center" in line item 004 not filled ". Please follow the example given below for better understanding.
    Advance posting:
    vendor a/c....dr   (Profit center 3)
    To bank Clearing (Profit center 3)
    To TDS on payment
    Invoice:
    Expense ....dr  (Cost Center1 / profit Center 1)
    Expense ....dr (Cost Center 2 / Profit Center 2)
    To vendor a/c
    To TDS on Invoice
    Up to here the document splitting works fine with Profit Centers and segments getting displayed in all line items in GL view. The issue comes when we select both the documents in F-53 and try to pay out the balance amount.
    Please note the issue does not crop up if we do not populate the withholding tax code while posting the advance entry. The system automatically posts to the relevant profit centers and segments in F-53. But this is not the business scenario.
    Please let me know if somebody can throw some light on the above issue.
    Edited by: sid_das on Dec 12, 2011 5:32 PM

    Resolved at our end by tweaking the splitting rule to match the Business requirement.

  • Custom Master Page issue with Document Set Libraries

    Details: Publishing site using SharePoint 2013.  The SharePoint is on my company's servers.
    Have a custom Master page that has a navigation banner (built with HTML/CSS/javascript).  The site has it applied successfully to the "Site Master Page" but when I also apply it to the "System Master Page", the libraries that have
    Document Set type content do not show the files within.   We'd like to be successful in applying to the "System Master Page" as that allows the banner to show when an actual library is accessed.    Any suggestions, please?

    Thanks. I've been experimenting with this for a few days now, and there's lots I don't understand about why and such, but your process above works. That's a big load off me right now and I really appreciate it. I'm going to be able to survive the initial
    roll-out and implementation of the new site. Going forward, I've got lots to learn and find out, I've already heard that there's a desire to really redesign the master page for the site and subsites, way beyond the little CSS customization I did. Fun.
    If you've got a little time though, perhaps you can provide some explanation. If not, no problem.
    On step 6, when I do as you detail, click the System Master Page and reset all the subsites, it seems to work fine with my custom master page. If I do that with the Site Master Page settings, my custom page causes the redirect issue in the subsites again.
    This is whether I do the Site Master Page by itself, or in conjunction with the System Master Page settings. If I revert back to the Seattle master page in the Site Master Page settings and my custom pate in the System Master Page, the issue goes away again.
    It is completely messing with my head, trying to figure out why that would be, and this is all beside trying to figure out why adding the one little CSS reference to the Seattle master to create my master page breaks things (sometimes!).
    Just fyi, what I've ended up with for now is pulling my custom master page out of the system and using the Alternate CSS URL to add my custom CSS to the Seattle master page on the sites. As I thought about all this, I decided I didn't want to leave the breakable
    custom page out there for some unsuspecting site manager to accidentally pick and get everyone screaming about the broken sites.
    Thanks again,
    Steven

  • Issue with document library and explorer view

    Hello,
    I have couple of issues on which I need some assistance.
    We recently backup and restore the SharePoint portal based on 2007 to SharePoint 2010 server.We're facing some issues on it now 
    When we try to open any office document from a document library it gives a prompt  stating below message in image. I check the document, it is nowhere checked out and also I have full control on the site , in fact I am site collection admin.
    Open with explorer view is not working. When we click on open with explorer it just refreshes the page and show the same page again.
    Need help on this couple of issues.
    Regards,
    Mandar

    In addition to Margriet her solution this article written by Amol Ghuge can help in troubleshooting problems with Explorer view:
    http://sharepointknowledgebase.blogspot.nl/2013/09/open-with-explorer-is-disabled.html
    - Dennis | Netherlands | Blog |
    Twitter

  • Issues with document loading

    I am currently loading a project that I created yesterday.
    There were some problems, which I'll explain. At the moment, the RH
    status bar says "Ready," and I am typing in a browser. If I switch
    focus to RH, nothing happens until I move the mouse. As soon as I
    move the mouse, an hourglass cursor appears, the RH status bar says
    "updating bookmarks," and a progress indicator appears. Needless to
    say, this is annoying.
    The problems I had yesterday seem to concern autonumbering.
    As part of my evaluation, I'm attemping to use "Convert
    Autonumbering to HTML List." We use multilevel autonumbering, and
    on the first go, RH did not pick it up. To simplify the tests, I
    set Ignore Autonumbering for all tags except one, "step," and in
    Frame I altered the autonumbering for "step" to <n+>\t. RH
    then picked up the autonumbering and used <ol> (I presume),
    but in topics with more than one sequence of steps, the
    autonumbering did not reset. (I shpuld have checked the HTML, but I
    didn't.)
    To reset the autonumbering, I cleared Ignore Autonumbering
    for the Frame tag that resets the counter. The autonumbering for
    this tag (call it "step head") is simply < =0>. Then in RH I
    selected Update. After a while, RH crashed with one of those "send
    report to Microsoft?" messages. It was the end of the day, so I
    left it there.
    This morning I tried to reload the project (hoping to re-use
    the Content Settings for another project). RH showed the following
    message repeatedly, where "whatever.htm" represents the names of
    different topics.
    "File whatever.htm is generated from FrameMaker document. On
    next update of the rameMaker document all the modifications to
    whatever.htm will be lost."
    The message had two check boxes, "Preserve modfifications to
    this file" and "Don't show me this message again." With some
    trepidation I clicked "Don't show me this message again" (does it
    apply to this project only, or to all projects from now on?)
    It was after all this that I began having problems with the
    "Ready" status.

    This is a long sequence of events. Not sure what's the
    problem. Please try if this helps.
    You can right click on FrameMaker document in RoboHelp (icon
    along with filename in Project Explorer in RoboHelp) and select
    properties. In "FrameMaker Document Settings" dialog which opens
    up, go to tab "File Update Settings" and you can chose which HTML
    topics you want to preserve.

  • Issue with generating a security role in program CRMD_UI_ROLE_PREPARE

    Hello -
      We have recently upgrade from CRM 2007 from CRM 4.0. We are working with the Business Roles and generating the security role from the business role using CRMD_UI_ROLE_PREPARE. We first create a simple test Business Role, a Z* copying from TPM_ROLE. Then we generated the security using CRMD_UI_ROLE_PREPARE. This was fine. Now was have copied a Business Role from TPM_ROLE that is one we want to use. We have created our own Z* Nav Bar and Role Config Key. This is working fine, but now when we try to generate using CRMD_UI_ROLE_PREPARE, the txt file is not generated, though there are no errors in the log. We can still generate the security role from our simple test. We have looked on line, and read the article in CRM Expert in June on Business Roles, but have not found the solution yet. Has anyone run into this?
    thanks
       George

    This is how I used this program:
    A. Generate required authorization objects
    1.     T-Code: SA38
    2.     Enter report CRMD_UI_ROLE_PREPARE and choose Execute.
    3.     Select your Business Role.
    4.     Choose language EN.
    5.     Choose Execute.
    Result: A file is created for each Business Role and saved on your computer in the SAP working directory. If you are working with Microsoft Windows XP, this file is saved in C:\Documents and Settings\<User ID>\SapWorkDir\.
    B. Assign authorization objects
    1.     T-Code: PFCG
    2.     Enter your Role and choose Change.
    3.     On the Menu tab choose Import from file and upload the file previously created.
    4.     Choose Save.
    Then adapt the authorizations if needed and choose Generate.
    Stephanie.

  • 10.4.6 Issues with screen saver security and Finder Inspector dialog

    Now that I've updated my system to 10.4.6, I no longer have password protection on my screen saver. I also can no longer right-click, select Inspector, and lock multiple files at once.
    I can open Inspector and lock multiple files using the key command with no problem. It's just when I try to right-click that doesn't work. Inspector comes up, but it's available only for the entire disk -- it does not show multiple files. And a lock box to check doesn't exist anywhere in the dialogue box. Note that this is only a problem with files on my slave partition. My master drive is OK.
    Anyone else have these issues?

    Welcome to Apple Discussions!
    Sometimes if preference files are corrupt an update will simply reinforce their being corrupt. Try resetting them from the program that activates them. The password screen saver is in Apple menu -> System Preferences -> Security mentioned in:
    http://docs.info.apple.com/article.html?artnum=303548
    As for the inspector, I don't know where that is controlled, but maybe someone else here will know.

  • Issue with Apple id security

    Sorry if this isn't the correct community for this question, none of the others seemed to fit either.
    So here is my issue, and I'm hoping someone has advice because so far calling/emailing apple support hasn't helped.
    Since July I have been receiving CONSTANT email requests from someone trying to change the password on my Apple Id. I’m not talking about 1-2 emails a month, I’m talking about 15 in August, around 24 in September and an impressive 32 last month and, 13 emails since the 14th. I have reformatted my laptop, changed passwords on everything, virus scans, and spyware scans. At the request of Apple support I started to report the phishing emails, I’ve removed my alternate email. Again at the request of Apple support, I created a NEW email just to use as my new Apple Id and primary email. The guy assured me that the next time the person tried to submit a password reset on my old primary email/Apple Id that it would come back with an error telling the person no account is associated with that email address. Well that guy was pretty much dead wrong, not more than 2 minutes after hanging up with him I received yet another request for my password.
    Does anyone have any suggestions ? I’m willing to try anything accept create a whole new Apple Id, because I refuse to purchase my songs/paid apps again !!

    oh man, I know exactly what you're talking about. i have a relatively easy to guess apple id email and everybody in the world thinks it's theirs... but once I turned on two-step authentication, the emails stopped completely.  here's a faq about it:
    http://support.apple.com/kb/HT5570
    once i turned that on, whenever they'd want to reset my password, they would get asked for my recovery key, which they don't have, haha!  victory is mine.

  • Issue with Document Splitting

    HI All,
    After I activated Document Splitting, I have posted an Invoice(F-43). It has splitted correctly.
    31 Vendor      PC1  20,000 Dr
    31 Vendor      PC2  10,000 Dr
    40  Exp A/c1  PC1   20,000
    40  Exp A/c2  PC2   10,000
    When I'm making payment through F-53, Its not splitting correctly. Below is the enry I am getting.
    Its not splitting the amount made from Bank. In F-53, In Profit Center field, I gave PC2.
    Pls let me know what mistake I made in Configuration.
    and why Its showing Zero Balance Clearing A/c in this entry.
    50 Bank A/c                             30,000
    25 Vendor A/c                         20,000
    25 Vendor A/c                         10,000
    50 Zero Balance clearing A/c  10,000
    40Zero Balance clearing A/c   10,000
    Niranjan Yandamuri

    Hi Niranjan,
    Split Processor basically does two things: splitting a document line item or adding balancing entries for selected dimentions (profit center, etc). Split Processor determines whether a line needs to be split based on Split Rule. A Sprilt Rule is assigned to Business Transactions, A Business Transaction with a Variant defines which Item Categories are avalable for Split Rule to split or not split.
    Here is the documentation for Item Category:
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/ee/79c5c00ca249b783bc74fff0e484aa/frameset.htm
    Here is the concept of document splitting:
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/87/3da04028f40160e10000000a1550b0/frameset.htm
    Here is how to configure document split process:
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/49/121407cbff280ee10000000a42189c/frameset.htm
    Hope this is helpful.
    Regards,
    Ming

Maybe you are looking for