Issue with fetching records when SalesForce Date Fields involved

Using the Events application of Salesforce I enter a record of data.  The record has a Start Date of Monday and an End Date of Friday for a given week.  Crystal will not fetch/display the record in the report.  If I go back and change the Start Date and the end Date to teh same day, the record will print in Crystal.
Is there some Date flag within Crystal that I need to toggle allowing a record to print based on date ranges?  I don't understand why a record would print when Start and End Date are the same but will not print when different?

Here is the code....  I have also noticed that there are three fields - Start Date, End Date and Due Date.  Only when all 3 fields are set to the same value within Salesforce will the record print in Crystal.  I have tried removing any reference to the Date fields in the crystal report but its not helping
www.salesforce.com
SELECT Name, Id
FROM   Account
EXTERNAL JOIN Account.Id={?www.salesforce.com: Event.AccountId}
www.salesforce.com
SELECT ActivityDate, CAT_Type__c, Subject, Location, PO_Number__c, CO_Number__c, Is_Closed__c, Description, Submit_For_Invoice__c, Is_Scheduled__c, Status__c, RecurrenceStartDateTime, RecurrenceEndDateOnly, OwnerId, AccountId
FROM   Event
WHERE  (CAT_Type__c='Remote Support - Non Revenue' OR CAT_Type__c='Remote Support - Revenue' OR CAT_Type__c='Travel - Non Revenue' OR CAT_Type__c='Travel - Revenue') AND (Status__c='Closed' OR Status__c='Complete - Not Closed' OR Status__c='Open')
EXTERNAL JOIN Event.AccountId={?www.salesforce.com: Account.Id} AND Event.OwnerId={?www.salesforce.com: User.Id}
www.salesforce.com
SELECT LastName, Id
FROM   User
EXTERNAL JOIN User.Id={?www.salesforce.com: Event.OwnerId}

Similar Messages

  • BAM Alerts - When a data field in a report meets specified conditions

    Hi ,
        Please find the below mentioned issue , which I am facing at the time of creating BAM alerts.
      I have created a data object, when i am creating the bam alert  [ create new alert --> create rule --> when i select an even " When a data field in a report meets specified conditions" and "When a data field in a data object meets specified conditions" then below in rule expression I am unable to edit the expression of  "this data fields has a specified condition of x".]
                          Appreciate your quick response.
    VAMSI.P

    Hi,
    I am having the same issue, and I am on IE9.  When I was on IE8 I had no problems.  Are you also on IE9
    Thanks
    Judy

  • I  have an issue with speaker/microphone. when i call or i  recive a call the person on the other side can not hear me.

    i  have an issue with speaker/microphone. when i call or i  recive a call the person on the other side can not hear me.

    Hello aalapdesai112,
    Lets see if we can get you back to taking calls normally again. Start your troubleshooting with the article below and go through checking to making sure that you are up to date with your iOS as well as a simple restart on your iPhone. 
    If your voice is too faint or sounds unclear using iPhone, or iPod touch
    http://support.apple.com/en-us/HT203792
    Regards,
    -Norm G. 

  • Issue with Emoji icons when sent from iOS6 to iOS5

    Issue with Emoji icons when sent from iOS6 to iOS5, all icons appear as a square on the iOS5 message screen.
    Both iOS are the current version and the phones are 4S 64GB
    Anybody got this problem

    Hi!
    What kind of RFC do you use? If you use synchronous RFC the caller waits for the answer/result of the called function. In normal cases this should solve your issue.
    Regards,
    Volker

  • Hi BC, I have an issue with BC. When the shopping cart is used it takes stock out of inventory and h

    Hi BC,
    I have an issue with BC. When the shopping cart is used it takes stock out of inventory and holds it, regardless of whether or not a customer proceeds to purchase. OK.
    To make matters worse, the stock is only cleared from the shopping cart when the customer closes the browser - not when they close the shopping window.
    Now lets say a customer doesn't close their browser for a month - it happens! .. when their stock is finally returned it may throw out our stock levels that have in the meanwhile been adjusted. So their stock will be added on top of an accurate stock take, putting stock in that isnt really available.
    This is causing us mayhem.
    We have not yet seen if stock is actually returned at all. In the test we did today where we filled a shopping cart then closed the browser without making a purchase, the stock was not returned immediately. So we dont even know when it will be returned - thats IF a customer actually closes their browser. Any solutions out there?
    Jo

    Hi there,
    The way stock is managed in this situation is desirable for many in that case otherwise shopping on a site and adding to cart would not be viable or use friendly.
    What you mention about not closing a browser though is a case that is not true. IF you go into the shop settings in the admin you can see the cart restore timer which is by default 24 hours but you can change this to as low as 1 hour if you wish.

  • Issue with BAPI_ACC_***_TRANSFER_POST (when trying to execute as per ABT1N)

    Hello experts,
    For this thread, please check the following link:
    [Issue with BAPI_ACC_***_TRANSFER_POST (when trying to execute as per ABT1N);
    Thanks and Regards,
    Daniel.

    Hi Experts,
    The question has been answered as per the following "link":
    [Issue with BAPI_ACC_***_TRANSFER_POST (when trying to execute as per ABT1N);
    Daniel

  • Issue with Safety Upper limit for CALDAY Field for Generic Data Source

    Hi,
    I have given Upper limit as 1 for Calday field of one of the Generic Data Sources.
    I have got a doubt here.If today's load got failed and I will rerun the load next day.So Will that new run captures all 2 days records.
    Can any one advise me on this.
    Regards,
    K.Krishna.

    Hi,
    A one-day upper safety interval determines that an extraction run today, only fetches records up to yesterday (if the pointer has the day before yesterday date, the extraction comprises from the day before yesterday to yesterday).  This is meant to avoid missing records that were about to be persisted in the database when the delta extraction is running but whose date was determined in memory before the delta started.
    If pointer has today date value and you want to load data from today and yesterday, you should use a lower safety interval.  Take into account that this could reload data previously extracted.  Therefore, only InfoProviders with overwritting features (DataStores or InfoObject master data) should be used as targets of this extractions.
    You can find further details at:
    http://help.sap.com/saphelp_nw04/helpdata/en/37/4f3ca8b672a34082ab3085d3c22145/content.htm
    I hope this helps you.
    Regards,
    Maximiliano

  • Issue with table ROOSPRMSF entries for data source 0FI_AP_4

    Hi Experts,
    I am facing with an issue where we found incosistencies with table ROOSPRMSF in R/3 system.
    In BW , we have done initializations based on fiscal period selections (none of the selections overlap) for data source 0FI_AP_4.
    We have done in total 7 initializations. So in BW system in table RSSDLINITSEL we have 7 initialization requests.
    But in R/3 system we have 49 records for data source 0FI_AP_4 in ROOSPRMSF table out of which 42 are invalid records.
    I suspect that these 42 invalid records are created due to the execution of program RSSM_OLTP_INIT_DELTA_UPDATE when the tables ROOSPRMSF are actually holding the 7 initialization request entries.   Due to this each and every initialization request is linked to rest of the other intialization requests and ended with 49 records in table ROOSPRMSF table.
    Now our data loads are running fine but daily a short dump is raised . In the daily loads, BW init records in RSSDLINITSEL are compared with ROOSPRMSF entries and all the other 42 records which are invalid are written into system log and a short dump is raised.
    In order to fix these inconsistencies i checked for OSS note 852443. (Point 3 in OSS note)
    But it is specified to delete the delta queue for data source 0FI_AP_4 in RSA7 and instructed to execute the program RSSM_OLTP_INIT_DELTA_UPDATE so that the ROOSPRMSF table will be reconstructed with valid records available in RSSDLINITSEL. 
    From OSS note 852443 point 3
    "3. If the RSSDLINIT table in the BW system already contains entries, check the requests listed there in the RNR column in the monitor (transaction RSRQ). Compare these entries with the entries in the ROOSPRMSF and ROOSPRMSC tables with the INITRNR field. If, in the ROOSPRMSF and ROOSPRMSC tables for your DataSource source system combination, there are more entries with different INITRNR numbers, use transaction RSA7 in an OLTP source system to delete all entries and then use the RSSM_OLTP_INIT_DELTA_UPDATE report mentioned in the next section. For a DataMart source system, delete the entries that you cannot find in the RSSDLINIT table using the procedure described above."
    My question is if we delete the delta queue in RSA7 then all the tables in R/3 (ROOSPRMSF, ROOSPRMSC, Time stamp table) and BW (RSSDLINITSEL, initialization requests will be deleted) will be cleared. Then how will the program RSSM_OLTP_INIT_DELTA_UPDATE  copy entries into ROOSPRMSF table in R/3 ?
    Could any one please clarify this ?
    Thanks
    Regards,
    Jeswanth

    Hi Amarnath,
    Did you unhide the new field in RSA6 and regenerated the DataSource?
    Often SAP will populate newly added fields (belonging to the same (set) of table(s) used for extraction) automatically (e.g. SAP uses 'move-corresponding' in it's extractor-code, or, in this case, reading all fields from the DD, FM BWFIU_TRANSFORM_FIELDLIST).
    If the DataSource looks fine to you and the field is still not populated in RSA3 you can't go without a user-exit.
    Grtx,
    Marco

  • Cfgrid updating issue with multiple records

    I have a cfgrid within cfform, it fetches the records and shown in the screen properly. refer screenshot.
    have a new field "sortfield" as a editable field and updating the record as 1,2,3,4 (instead - 1,6,2,4) but after updated in the db. The datas updated differently and not clearly updating the relevant data in the relevant record in the sort field. value was shuffled sometimes.
    used the below code:
    http://help.adobe.com/en_US/ColdFusion/10.0/Developing/WSc3ff6d0ea77859461172e0811cbec22c2 4-7acf.html
    under Update the data source with the cfquery tag

    I have a cfgrid within cfform, it fetches the records and shown in the screen properly. refer screenshot.
    have a new field "sortfield" as a editable field and updating the record as 1,2,3,4 (instead - 1,6,2,4) but after updated in the db. The datas updated differently and not clearly updating the relevant data in the relevant record in the sort field. value was shuffled sometimes.
    used the below code:
    http://help.adobe.com/en_US/ColdFusion/10.0/Developing/WSc3ff6d0ea77859461172e0811cbec22c2 4-7acf.html
    under Update the data source with the cfquery tag

  • Issue With Page Break When Sorting is also applied on group

    Hi
    I am facing an issue with Page break only when I have sorting applied on the grouping that I have in the template.
    The following is the sample XML
    <ROWSET>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Accounts</ORGANIZATION>
    <FULL_NAME>test1,</FULL_NAME>
    <ELEMENT_NAME>TEST BONUS</ELEMENT_NAME>
    <CLASSIFICATION>Supplemental Earnings</CLASSIFICATION>
    <RUN_VALUE>250</RUN_VALUE>
    <MONTH_VALUE>500</MONTH_VALUE>
    <QUARTER_VALUE>500</QUARTER_VALUE>
    <YEAR_VALUE>500</YEAR_VALUE>
    </ROW>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Finance</ORGANIZATION>
    <FULL_NAME>test2</FULL_NAME>
    <ELEMENT_NAME>VOLUNTARY AD AND D</ELEMENT_NAME>
    <CLASSIFICATION>Voluntary Deductions</CLASSIFICATION>
    <RUN_VALUE>5.19</RUN_VALUE>
    <MONTH_VALUE>10.38</MONTH_VALUE>
    <QUARTER_VALUE>10.38</QUARTER_VALUE>
    <YEAR_VALUE>10.38</YEAR_VALUE>
    </ROW>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Finance</ORGANIZATION>
    <FULL_NAME>test3</FULL_NAME>
    <ELEMENT_NAME>HMO MEDICAL</ELEMENT_NAME>
    <CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
    <RUN_VALUE>19.67</RUN_VALUE>
    <MONTH_VALUE>39.34</MONTH_VALUE>
    <QUARTER_VALUE>39.34</QUARTER_VALUE>
    <YEAR_VALUE>39.34</YEAR_VALUE>
    </ROW>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Finance</ORGANIZATION>
    <FULL_NAME>test4</FULL_NAME>
    <ELEMENT_NAME>PENSION NR DC</ELEMENT_NAME>
    <CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
    <RUN_VALUE>0</RUN_VALUE>
    <MONTH_VALUE>360</MONTH_VALUE>
    <QUARTER_VALUE>360</QUARTER_VALUE>
    <YEAR_VALUE>360</YEAR_VALUE>
    </ROW>
    </ROWSET>
    In the template I group the data based on CLASSIFICATION and then sort on the same column CLASSIFICATION. I have a page-break applied for every group.
    When I generate the PDF, I am not getting the page-breaks for every group. Instead some of them are displayed in the same page.
    But when I remove the sorting that I had in the template on the column CLASSIFICATION, I am getting the output in the desired way but not in a sorted order.
    kumar

    Hi All,
    I am using MS-WORD 2007 and BI Publisher desktop 10.1.3.3.3.
    When I use split-by-page-break, splitting is performed for every line .. but not for group of lines.
    Can anybody throw some light on this?
    FYI...
    I am using this code:
    ?if: position() mod 6= 0?
    ?split-by-page-break:?
    ?end if?
    (Of course with in tags)
    in G_LINES loop.
    Can anybody help me out :-(
    --Saritha                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Issue with Apex and IE , losing data for items on submit

    Hi All,
    I am facing one problem in APEX when i run my page on IE 8. When i submit the page i lose the data for all my items while the same does not happen on Firefox mozila and Google chorme.
    Actually i have one select list which has one dynamic action associated with it when i select the options from this list other object become enable and disable with that action and page get submit.
    but when i select this list in IE page get submit and my value which i selected also get lost.
    Please let me know if this is some issue with IE or Apex as soon as possible.
    This is bit urgent.
    Thanks

    Modify your code as below and run the page in debug mode and note the value shown for p610_x DECLARE
    l_vc_arr2 APEX_APPLICATION_GLOBAL.VC_ARR2;
    BEGIN
    wwv_flow.debug('value for p610_x is ' || :p610_x);
    l_vc_arr2 := APEX_UTIL.STRING_TO_TABLE(:P610_X,'~');
    FOR z IN 1..l_vc_arr2.count LOOP
    htp.p(l_vc_arr2(z) || '
    END LOOP;
    END;varad

  • Issue with instant ringback when using sip trunk to SP

    Hi all,
    We use CUCM 8.0.2.
    We have a SIP trunk to a SP connected via one of our Cisco 2911 routers configured as a CUBE.
    Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M3, RELEASE SOFTWARE (fc2)
    c2900-universalk9-mz.SPA.150-1.M3.bin
    Cisco CISCO2911/K9 (revision 1.0)
    Technology Package License Information for Module:'c2900'
    Technology Technology-package
                      Current       Type
    ipbase        ipbasek9      Permanent
    security      securityk9    Permanent
    uc              uck9            Permanent
    data           None            None
    We also have several ISDN lines that run out via various Cisco routers configured as H323 gateways.
    We use 7945 and CIPC for our phones.
    We're having an issue with calls going via the SIP trunk where we hear ringing instantly after dialling - but before the actual device at the other end starts ringing (considerable difference).
    Using the SIP trunk: If I make a call to my mobile phone - I hear ringing instantly - about 3 rings before my mobile phone actually starts ringing - undesireable.
    Using H323 gateway: If I make a call to my mobile phone - I hear silence for a bit - then ringing when the mobile starts ringing - desired.
    Using SIP trunk: If I make a call to a landline that is ready - it rings instantly for at least 1 ring - before the actual phone I'm calling starts ringing - undesireable.
    Using H323 gateway: There is a momentary pause before hearing ringing on my phone and the phone I dialled - desired.
    Using SIP trunk: If I make a call to a landline that is off-hook (with no call-waiting/etc.) - it rings once and then returns the busy signal (the worst issue) - undesireable.
    Using H323 gateway: There is a momentary pause before hearing busy signal - desired.
    Phone to phone internally (same network): Operates as expected (instantly rings locally and on the phone I'm calling). Between phones that utilise the SIP trunk and phones that utilise the H323 gateways within the same network - communication is instant and as expected.
    Any ideas why this happens and how to stop it?
    I want it to not ring until the situation is known and that it can provide the appropriate feedback (ringing/busy/etc.).
    Some possibly relevant config (note that there is a known bug with this IOS that meant I had to declare the codec in each dial-peer as the voice class would not work):
    voice service voip
    address-hiding
    mode border-element
    allow-connections sip to sip
    sip
      bind control source-interface GigabitEthernet0/0
      bind media source-interface GigabitEthernet0/0
      header-passing error-passthru
      early-offer forced
      midcall-signaling passthru
    interface GigabitEthernet0/0
    ip address x.x.x.x 255.255.255.252
    ip access-group acl.SIP-IN in
    no ip redirects
    no ip unreachables
    ip verify unicast reverse-path
    ip virtual-reassembly
    duplex full
    speed 100
    no cdp enable
    gateway
    timer receive-rtp 1200
    sip-ua
    connection-reuse
    gatekeeper
    shutdown
    dial-peer voice 1 voip
    description *** INBOUND CALLS FROM CARRIER ***
    translation-profile incoming SIPTRUNK-INCOMING
    session protocol sipv2
    incoming called-number #blah blah#
    dtmf-relay rtp-nte
    codec g711alaw
    ip qos dscp cs5 media
    no vad
    dial-peer voice 61 voip
    description **** WA, SA AND NT NUMBERS ****
    destination-pattern 0[8]........
    session protocol sipv2
    session target ipv4:<MY SP's SIP SERVER>
    incoming called-number 0[8]........
    dtmf-relay rtp-nte
    codec g711alaw
    ip qos dscp cs5 media
    no vad
    dial-peer voice 81 voip
    description **** MOBILE NUMBERS ****
    destination-pattern 0[4]........
    session protocol sipv2
    session target ipv4:<MY SP's SIP SERVER>
    incoming called-number 0[4]........
    dtmf-relay rtp-nte
    codec g711alaw
    ip qos dscp cs5 media
    no vad
    dial-peer voice 500 voip
    description *** INBOUND SIP TRUNK TO CUCM PUB ***
    translation-profile outgoing SIPTRUNK-CALLING-ADD-0
    preference 1
    destination-pattern 5[12]..
    session protocol sipv2
    session target ipv4:<OUR CUCM PUBLISHER IP>
    dtmf-relay rtp-nte
    codec g711alaw
    ip qos dscp cs5 media
    no vad
    Any help or a point in the right direction would be greatly appreciated.
    Cheers,
    Brett

    I ended up resolving this issue as follows:
    In CUCM, under Device > Device Settings > SIP Profile.
    I modifed the profile relevant to my SIP trunk, under the "Trunk Specific Configuration", I set "SIP Rel1XX Options" from "Disabled" to "Send PRACK if 1xx Contains SDP".
    Now, I get the expected delay before hearing ringback.
    Solved!

  • Issue with PO Currency when currency changed after the approval.

    Hi All,
    we have  get an issue with PO currency which is as follows
    Step1:Created a Limit PO with value  3.701,00  CHF and sent it for approval,,and PO is approved and transfered to backed (We are using  "Extended classical scenario'  .
    Step2:but we got to know that the PO value should be  in USD ,so will go to PO and changed the currency value to USD ,it coveted value to 3421 but ,since i need the  3701 USD  i changed the value  to 3701 at item level and orderd  the PO.
    but after approval  , when it transfered to backed it is showing the value  3.701,00 USD at header level  ,but 3.402,84 USD at item level.
    so when we are trying to create GR it is populating 3.402,84  USD but we need 3701 USD.
    is any one know the what is the problem with this.
    please help
    Regards
    cb

    You can re-output a message that has already been outputted (printed or transmitted).
    "Repeat message" function
    You use this function if you wish to print out or transmit again a complete purchasing document that has already been outputted. Note that the system takes account in the message of any changes made to the purchasing document since it was last outputted - i.e. the system always outputs the current status of the document. If you wish to have old statuses available, you must optically archive the purchasing document.
    Activities
    You invoke the Messages screen as follows:
    Via the purchasing document itself (Header  Messages) or
    Via <Purchasing document> Messages  Print/transmit.
    Enter the processing status 1 (successfully processed) and display the messages.
    Select the desired message and choose Goto-> Message details.
    Choose Edit-> Repeat message or Change message.
    The system inserts the new message. If a change message is involved, the system sets the Change indicator.
    Save your data.
    Hope you find this useful.
    Edited by: Reetesh on Dec 3, 2011 7:36 PM

  • Issue with corrupted file when dragging to timeline

    Has anyone ever had an issue with a files audio becoming corrupted when moving the file from the editing window to the timeline.  I am also seeing the my camtasia mp4 becomes blurry on the timeline but plays fine in the editing screen.
    I had not problem with camtasia Mp4s previously and today I have had so many issues with premier pro

    Hi,
    Even i faced this issue before...the problem with file adapter is the attribute nxsd:quotedBy takes &quot; as default even if u dont mention it takes the same and now after the quotes it immediately expects | wch is not there in the data and it throws the error...now the fix for the problem is put some symbol for nxsd:quotedBy wch u never expect in the data some thing like less than or greater than symbol ....some thing like below
    <element name="FieldTwo" type="string" nxsd:style="terminated"
    nxsd:terminatedBy="|" nxsd:quotedBy="<"/>

  • Issue with Saving the Query output data in Excel format

    Hi,
    Recnetly we had upgraded from 4.6c to ECC 6.0.
    In ECc 6.0 environment, when user try to export the query output , we are getting only XML option to save the data.
    But user want to save the data in EXcel format, he was able to do that in 4.6C.
    pleas eprovide some inputs, on this issue.
    Thanks,
    Sanketh.

    I cannot for the life of me imagine, why a link to a post in the 'Business One Forum' where one uses ODBC to transfer query-data to MicroSoft Excel is of relevance to the OPs question, even if the same is not a security issue.
    Never mind. [note 40155|https://service.sap.com/sap/support/notes/402155] deals with various symptoms in the ALV-Excel combination as as of release 4.6C. There are various others, mostly in components BC-SRV-ALV and BC-ABA-LI - also: I remember that when we upgraded from 4.5B to 4.7C there was an issue with Excel-templates -> the solution was in the release notes somewhere. So, in addition to SMP you might want to check the release notes and/or upgrade guide for solutions.
    And yes, moderators ... this is not a security issue, this should go to ECC-Applications/Upgrade.

Maybe you are looking for

  • Ipod not showing any music or video files!

    I just spent hours loading about 2 gb worth of songs and videos onto my new 5G ipod last night. When i turned the ipod on this morning, there were no files (no songs, playlists, video, etc.) However, when i check "settings-->about", the info is showi

  • Text field properties-Using the 'required' option in the text field properties.

    Using the required' option in the text field properties. The 'help' manual describes the 'required' function as this: Required Forces the user to fill in the selected form field. If the user attempts to submit the form while a required field is blank

  • Change of a database link in OWB

    I have a good suggestion to change a a database link when a server is moved to another location (in that case the database link of the source module has to be changed) In OWB 9.0.2 it's not impossible to delete a database link in OWB, so you have to

  • Killing all sessions at once who are locking the objects

    Hello all, i am working in 9i Oracle RDBMS on AIX IBM OS most of the time we face locking issue and there comes more then different 50 sessions which locking different tables. here is my script to find out what sessions are locking what tables. set l

  • Missing class file for extended controller

    Any response/advice is greatly appreciated. I've searched the forums, and I saw some had this error, but the post wasn't resolved. We are on 12.1.3. I've done this plenty of times when we were on 11.5.10 with great success. I've personalize a page to