Issue with PO Currency when currency changed after the approval.

Hi All,
we have get an issue with PO currency which is as follows
Step1:Created a Limit PO with value 3.701,00 CHF and sent it for approval,,and PO is approved and transfered to backed (We are using "Extended classical scenario' .
Step2:but we got to know that the PO value should be in USD ,so will go to PO and changed the currency value to USD ,it coveted value to 3421 but ,since i need the 3701 USD i changed the value to 3701 at item level and orderd the PO.
but after approval , when it transfered to backed it is showing the value 3.701,00 USD at header level ,but 3.402,84 USD at item level.
so when we are trying to create GR it is populating 3.402,84 USD but we need 3701 USD.
is any one know the what is the problem with this.
please help
Regards
cb

You can re-output a message that has already been outputted (printed or transmitted).
"Repeat message" function
You use this function if you wish to print out or transmit again a complete purchasing document that has already been outputted. Note that the system takes account in the message of any changes made to the purchasing document since it was last outputted - i.e. the system always outputs the current status of the document. If you wish to have old statuses available, you must optically archive the purchasing document.
Activities
You invoke the Messages screen as follows:
Via the purchasing document itself (Header Messages) or
Via <Purchasing document> Messages Print/transmit.
Enter the processing status 1 (successfully processed) and display the messages.
Select the desired message and choose Goto-> Message details.
Choose Edit-> Repeat message or Change message.
The system inserts the new message. If a change message is involved, the system sets the Change indicator.
Save your data.
Hope you find this useful.
Edited by: Reetesh on Dec 3, 2011 7:36 PM

Similar Messages

Is anyone else having issues with pages not opening many files after the update

I have just updated my pages app and now many of my documents cannot be opened. Any ideas ?

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

Issue with bringing up Weblogic 10.3 after changing username passcode

I am facing Issue with bringing up Weblogic 10.3 after changing username passcode in security realm Madhok, basically i have removed the default weblogic user and defined m,y own custome user and provide the credentials in the server start tab. When i try and bring up the admin server it comes up fine but the managed servers fail to start from admin console and i can see security credentials authentication error in logs? Why would that be considering the admin server is able to come up with the same credentials.
-Priya Madhok
Systems Architect
InterAlliance Group Services
http://www.interalliancegroup.com

We had similar problem in the past, our problem was:
Problem:
We deleted weblogic default user from security realm and create new user when node manager and the managed servers were down. When we tries to bring up the managed servers after starting node manager we kept getting authentication denied errors.
Solution:
Recreate weblogic user and now try and bring up managed servers from command line using weblogic user. Once they are up shut them down and bring them up again with the new user you have created and it will work
Reason:
The managed servers in 10.3 seems to be storing the authentication details in there local managed servers ldap or cache. When you start the managed servers the don't know the new credentials and are authenticating against older values of stored credentials, hence they fail. Once they are started with the old credentials they communicate with admin servers to sync there cache with admin servers and the new credentials gets updated and from then on you can restart the managed servers with new credentials.
Note: Sometimes after restart you may face the problem as the sync process with admin server is asynchornous, weblogic prints a line saying something like Performing async operation with server address null. If the line gets printed sync has happened and you are good. In case you don't see the line restart again and you will see the line after which you can restart with new credentials.

Hi BC, I have an issue with BC. When the shopping cart is used it takes stock out of inventory and h

Hi BC,
I have an issue with BC. When the shopping cart is used it takes stock out of inventory and holds it, regardless of whether or not a customer proceeds to purchase. OK.
To make matters worse, the stock is only cleared from the shopping cart when the customer closes the browser - not when they close the shopping window.
Now lets say a customer doesn't close their browser for a month - it happens! .. when their stock is finally returned it may throw out our stock levels that have in the meanwhile been adjusted. So their stock will be added on top of an accurate stock take, putting stock in that isnt really available.
This is causing us mayhem.
We have not yet seen if stock is actually returned at all. In the test we did today where we filled a shopping cart then closed the browser without making a purchase, the stock was not returned immediately. So we dont even know when it will be returned - thats IF a customer actually closes their browser. Any solutions out there?
Jo

Hi there,
The way stock is managed in this situation is desirable for many in that case otherwise shopping on a site and adding to cart would not be viable or use friendly.
What you mention about not closing a browser though is a case that is not true. IF you go into the shop settings in the admin you can see the cart restore timer which is by default 24 hours but you can change this to as low as 1 hour if you wish.

Issue with Emoji icons when sent from iOS6 to iOS5

Issue with Emoji icons when sent from iOS6 to iOS5, all icons appear as a square on the iOS5 message screen.
Both iOS are the current version and the phones are 4S 64GB
Anybody got this problem

Hi!
What kind of RFC do you use? If you use synchronous RFC the caller waits for the answer/result of the called function. In normal cases this should solve your issue.
Regards,
Volker

Hi, I have iphone 4s and is up to date with ios7 but when I change my ring tone again ring the default ring tone

Hi, I have iphone 4s and is up to date with ios7 but when I change my ring tone again ring the default ring tone
in the setting shows the ring tone i,ve chosen

I have been on chat and a telephone conversation with my internet provider SHAW.CA and they cannot seem to assit.
I do appreciate your replies. When you talk about Exchange Server, do you mean"Microsoft Exchange" because that is what I used to set up mail on iPhone? I also tried iCloud, but i did not like the way you have to choose sending "from" each time you send an email. I currently use 2 accounts,one for business, one personal.
In response to your above reply; I went to "mailbox" - sycronise account", but nothing happened.
Am I missing some other setting perhaps. I did "enable mobile" on internet provider webmail.

Issue with BAPI_ACC_***_TRANSFER_POST (when trying to execute as per ABT1N)

Hello experts,
For this thread, please check the following link:
[Issue with BAPI_ACC_***_TRANSFER_POST (when trying to execute as per ABT1N);
Thanks and Regards,
Daniel.

Hi Experts,
The question has been answered as per the following "link":
[Issue with BAPI_ACC_***_TRANSFER_POST (when trying to execute as per ABT1N);
Daniel

I have an issue with speaker/microphone. when i call or i recive a call the person on the other side can not hear me.

i have an issue with speaker/microphone. when i call or i recive a call the person on the other side can not hear me.

Hello aalapdesai112,
Lets see if we can get you back to taking calls normally again. Start your troubleshooting with the article below and go through checking to making sure that you are up to date with your iOS as well as a simple restart on your iPhone.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
http://support.apple.com/en-us/HT203792
Regards,
-Norm G.

Problem with"Evaluate User Policies"sch task after the upgrade OIM R1 to R2

Problem with "Evaluate User Policies" scheduled task after the upgrade from OIMg R1 to OIM 11g R2
After the upgrade process is completed we are having issue with Access policy not triggering if rule is set to custom attribute
- We had a Rule with custom attribute (Policy='Full-Time') the value gets populated by event handler which triggers the access policy in OIM 11g R1.. which worked fine in OIM R1
After the upgrade the value is getting populated but even after running "Evaluate User Policy" the Access Policy is not getting triggered.
We tested creating a rule with other custom attribute,policy does not trigger even after running Evaluate User Policy schedule Task in this case too
but if we try creating rule with OOTB attributes(Country='US') it works fine the access policy got triggered after running Evalute User Policy
One more issue we observed is
- Evaluate User Policy value usr_policy_update is not updated still set to '1' even after the Access policy got triggered (as it worked when rule is set to OOTB attribute)
I believe after the evaluate user policy gets triggered for a user it should update the value from '1' to '0')
Please let me know if you have any idea..Thanks!

well, I overcame the issue by 'fooling' the installer: on second node, change the scan ip address to point to something else (ie, different ip address to the scan in the first node, cleanup then rerun root.sh, it went past the trouble stage, then I still have problem later at the time database creation. I think scan ip address has to be setup correctly (round robin thingy)
This is how i did the cleanup before rerun root.sh
/u01/app/11.2.0/grid/crs/install/rootcrs.pl -verbose -deconfig -force

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!

Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped

Screen doesnt get blacked out when on call after the new update

Since the time i Have updated the firmware screen doesnt gets blacked out, when on call after the new update. Because of this option automatically get selected by getting touched cheecks.
any solution?

Please try to update your plugins [http://www.mozilla.org/en-US/plugincheck/] Flash is out of date.
Also the Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
'''For Firefox versions previous to 29.0:'''
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox"[[Image:Button reset]] button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
'''For Firefox 29.0 and above:'''
#Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
Now, a new tab containing your troubleshooting information should open.
#At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Why does a VRRP master with preemption disabled regain master state after the reboot ?

Q: Why does a VRRP master with preemption disabled regain master state after the reboot?
A: This issue is found in the following scenarios:
1. When spanning tree is disabled on either of the VRRP controllers but enabled on upstream switch(es).
2. When the controller(any one VRRP controller) and upstream device(s) run different versions of STP.
3. STP convergence time is different across the VRRP controllers.
In these scenarios, rebooted vrrp master is expected to come back as vrrp MASTER as the link takes some time to converge and fail to receive VRRP advertisement packets from its peer and may roll back to MASTER.
Trigger for this is, since STP is enabled on intermediate switch and disabled on controller, switch is taking some time ~30 secs to converge the link while port on the controller has become UP and fail-over to Master due to
not receiving VRRP advertisement packets
In all these cases, it is advised to enable holdtime to mitigate issue. Holdtime has been introduced to tackle this issue in the "preemption disabled scenario".
Configuration via CLI:
(controller) (config) #vrrp <id>
(controller) (config-vrrp)#holdtime
Description:
The VRRP virtual router does not begin listening to advertisements until the holdtime expires. If your deployment includes a VRRP master with preemption disabled and an uplink switch is running RSTP, a higher value will prevent the VRRP master from regaining the master state after it reboots.
Range: 30 - 120 seconds
Default: 45 seconds

Hey Jim,
Thanks for the follow-up. Here are some more details:
OS - 10.8.2
FCP X - 10.0.7
I can't update either of these because of my Avid installation.
Something else I didn't mention – this happens in a 4K project. Notice how a default Zoom title looks:
Lines 1 and 2 are almost stacked on top of each other.
Here's my title style:
Here's what the title looks after I apply the title style, modify Line 1, and remove the contents of Line 2:
And here's how it looks in the exported master file MOV:
Notice how it's pushed down?
Then I decided to make a 720p project. No more title problems.
So if you have some 4K footage, Jim, give it a go. Or if there's another 4K-er out there, try this and let me know.
Thanks!

Updated my iphone with iOS7.0.3, still dont have the option to reject the call or reject the call with a message when someone call and the phone is in the lock screen?

Updated my iphone with iOS7.0.3, still dont have the option to reject the call or reject the call with a message when someone call and the phone is in the lock screen? I was of the impression that this issue will be fixed with updates. Please see the screenshot.

Hello Beardsell,
This is when the phone is unlocked mode. My snapshot is when the phone is locked.
Remember when you get a call when the phone is locked and you used to have slide to answer in iOS 6 and if you slide up you would have options to reject, reject with a message and reject with a reminder. We dont have that in iOS 7. iOS 7 *****, I cannot get back to iOS6, apple needs to be user friendly. Screen shot 1 when the phone is locked, screenshot 2 when the phone is unlocked.

I receive and e-mail with attachments but when I forward them, the attachments are smaller. how to fix this?

I receive e-mails with attachments, but when I forward them the attachments are reduced in size. What do I need to do to have them forwarded the same size as I received them?

If the attachments are photos, when you forward them, look on the bottom right of your compose window, change to "actual size". It's probably set to small as displayed here:
Regards,
Captfred

When making changes to the I/O buffer size( motu-pci 424) it takes an abnormal length of time for the changes to take affect any ideas?

when making changes to the I/O buffer size( motu-pci 424) it takes an abnormal length of time for the changes to take affect any ideas?

A fully loaded one( keep in mind I have had fully loaded projects in the past, and it did not take this long) this was noticed after installing LP8, also major latencey even at 64 buffer size

Issue with PO Currency when currency changed after the approval.

Similar Messages

Maybe you are looking for