Issue with Flex field context value

Hello all,
I have changed the seeded flexfield context segments to customize based on our requirement for the "Additional Period of service" DFF. It looks good but the segments still point to the old value sets validation. Please advice how to fix it.
thank you
KK

Hi Kalyan,
Just check out if some kind of conversions are possible. You haven't specified the type of the parameters - both the search help parameter and the screen field parameter. Specify that too.
Regards
Anil Madhavan

Similar Messages

  • Issue with flex lifecycle

    I am trying to address an issue with flex lifecycle
    There is a ui component ( say CompA) comprising of multiple tabs with individual components used in each of them.
    CompA uses a data object that is used to populate the fields.
    On click of a button in another panel, I am setting the current state of the application to this view component and after CompA is completely rendered I would like to load the data object and populate the fields.
    The issue here is I cannot use the creationComplete event of CompA to load this data object because at this time not all components are  completely created. (creationComplete of each of those components is not completed yet),.
    When exactly can I load this data object into the UI fields. I am not able to figure out where even callLater() can be used .
    applicationComplete 
    Event doesn’t seem to be an option, in this case.

    You can load the data when the state changes.  There are events for that.
    You could also look into updateComjplete which may work for you.

  • Issue with printing of Currency Value.

    Hi,
    I have an issue with printing of Currency Value.
    ( Pleae let me know if any thread available already  I searched it before posting but not found).
    The Problem is as follows:
    I have a field  s_value TYPE  MARM-SALK3.  (which is of currency type).
    The value of field is actually 1664.1450.   Currency USD
    But when I print this variable in ALV report it prints as  166414.50  though I used the same data type. (SALK3).
    Pleaes help me to fix this.
    Regards,
    Venkat

    Hi,
    If you use ALV to display currency value, you must sure that currency amount links with currency unit. You can archive this by using ALV fieldcat:
    wa_fieldcat-fieldname = 'SALK3'.
    wa_fieldcat-tabname = 'ITAB'.
    wa_fieldcat-cfieldname = 'WAERS'.
    wa_fieldcat-ctabname = 'ITAB'.
    append wa_fieldcat to gt_fieldcat.
    Please check,
    Regards,

  • How to create Rules with Flex Field mapping in the bpm worklist

    I Have created a flex field label and was able to map to the flex field attributes .
    But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
    Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
    Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
    Any pointers or suggestion is highly appreciated .

    Hi,
    SE38 -> Enter program
    Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
    Now the selection screen will display with a button "Variant Attributes" at the top.
    Click on that button.
    In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
    In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
    Now whenever you run the prgrm with this variant, date will be displayed by default.
    Regards,
    Subramanian

  • Issue with Varchar2 field conversion for report output generated in EXCEL

    Hello All,
    I have an unique problem with one of my new reports for the User. The user wants the report output generated in excel data only(delimited data) format *(reports builder 10g)* .
    Everything was fine until i encountered this problem, there was this field which has unique ID's(alphanumeric and numeric), when i tried to run the report and generate output in Excel the numeric ID's say for example *(41593497999679354429)* is converted in excel and displayed like *(2.5881E+19)* and after format cells in excel it displays *(41593497999679300000).*
    The issue is only with 20 digits numeric ID's , if i append any special character to the end say '#' or '..' it shows the exact value along with the appended character. But the user insist they need only the value that is in the table. I am finding it hard to figure out, if any one of you have encountered the same issue or if any of you have any suggestions to overcome this excel conversion thing please do advice me.
    Thanks in advance :)

    Thanks for you response, but i already tried what you suggested, instead of appending single quote in front of ID, i did at the end prior with '#', it preserves the value if i add any character to the id but the appended value shows up too :(.
    Well, i just got the solution and it did work, thanks to [Brian Hill|https://forums.oracle.com/forums/thread.jspa?threadID=651632] for the post, i did what exactly he said and it worked. I was so very happy and wanted to share with everyone.

  • Issue with input field in table control

    Hi,
    I have an issue with field acgl_item-rstgr in the table control.
    I have created a screen program with a table control.
    In the control i have added a dictionary field as acgl_item-rstgr.
    When i execute, do f4 on the input field, select a value and press enter, then it is showing me
    error as 'Entry 'val' does not exist in T053R (check entry). Its really weird to understand this. I have selected the value
    from f4 and even then it says this. Its working for all other columns, but not working only for RSTGR.
    Plz help me on this regard.
    Code is like this.
    TYPES : BEGIN OF ty_rstgr,
              rstgr TYPE RSTGR,
             END OF ty_rstgr.
    TABLES : ACGL_ITEM.
    DATA : it_rstgr TYPE TABLE OF ty_rstgr.
    DATA : wa_rstgr TYPE  ty_rstgr.
    CONTROLS : table TYPE TABLEVIEW USING SCREEN 100.
    PROCESS BEFORE OUTPUT.
    MODULE STATUS_0100.
    LOOP AT it_rstgr INTO wa_rstgr WITH CONTROL TABLE.
    ENDLOOP.
    PROCESS AFTER INPUT.
    MODULE USER_COMMAND_0100.
      LOOP AT it_rstgr.
      ENDLOOP.
    Thanks,

    Hi Navitha,
    Its Check Table concepts for the error u stated. Please check wht the Search help ur using...Because for this field there is no search help at value table level...Use search help that hold all master data or create a custom search field in SE11 level or in program level.
    Cheers,
    Naveen

  • Issue with Region field in BW report

    Hi experts,
    I am facing an issue with BW Report ,the data for REGION for some billing doc no are showing as # and its description is not assigned.Also there is no data for region in its data target as well and also no data in VBRK table for those billing doc no in R3 side.
    Can you please suggest some solution.
    Thanks for help in advance.
    Regards
    NP

    Hello -
    If there is no data for charecteristic values,. #  and not assigned will be dispalyed in the report.
    Its BW funcnality,.
    If you would like to remove the # values  in BEX you have to go for a Macro,.
    If in WAD you have to eliminate the first values in the repactive web item.
    Regards,
    Vishwa.

  • Issue with custom fields mapping from CRM to ECC.

    Hi all,
    I have issues with replicating custom fields in a Service order. I have created new fields with EEWB and EEWC. Now the structure has been changed in ECC and CRM. But i have to map this fields to correct structures. Also i need some logic to apply.
    But i have addressed in couple of threads about the custom function module as in user exit for FI generation.
    But i didnt understand the concept of this custom function module. why is this been used?
    Could anyone let me know with an good example on how this has to be acheived.
    Points are highly awarded.
    Kindly reply me.
    Thanks,
    Kiran...

    Hi,
    Here you go,
    After you create custom characteristics.
    1. Do Assign category.
    2. Map contents.
    3. Double check your master catalog has the mapped content.
    4. Publish master catalog.
    As per your message, you are not having any error message during import, which tells me that you are one step to close.
    Cheers, Renga

  • Tricky issue with $FLEX$

    Hi All,
    I have a concurrent program with three parameters(say A, B,C)
    My requirement is to
    a) derive B using parameter A (I guess it can be done using $FLEX$)
    b) dervice C using both parameters A, B
    Is it possible to use $FLEX$ to fetch values of both A,B parameters.
    Could someone please assist.
    Regards
    Kiran

    Kiran
    I think you can do that. As when you flex you give value set name along with it. So you should be able to write in the query with $FLEX$.VALUE_SET1 and $FLEX$.VALUE_SET2
    I think it should work

  • Sharepoint 2010 Content Deployemnt Job issue with duplicate fields in User information List

    Hi friends,
    I am facing below issue with the content deployment job.
    It was working earlier. But now since from couple of days all the content deployment jobs in production environment are failing with below error.
    Field name already exists. The name used for this field is already used by another field in the list. Select another name and try again.
    ObjectName="User Information List".
    When I check the fields in User information list in targeted site, I found couple of columns are dupicate like "ask me about",first name","Last name" etc.
    Do i Need to drop target site collection or recreate with fresh content deployment job.
    Please suggest.
    Please help .
    Regards
    Subrat

    Hi,
    According to your post, my understanding is that you got duplicate field error.
    Based on the error message, you can try to use the following code sample to remove duplicate records, and check whether it works:
    http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneralprevious/thread/41ee04bd-91fb-4bf9-932a-bac42c56c357
    Here is a similar issue, you can also use the ‘RemoveDuplicateColumn64’ provided:
    http://sharepointsurfer.wordpress.com/2012/04/27/how-to-fix-publishing-site-content-deployment-error-duplicate-first-name-column/
    What’s more, as you had said, you can recreate a site with a fresh deployment job.
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Issue with dropdown fields

    Hello All,
    I have following issue with Complaints application.
    Issue - We have done some enhancement using EEWB and added some fields on 'Products' tab under complaints. After that we have made some of those fields as dropdown fields in the corresponding 'Field Group'.
    My problem is now I can see those dropdowns in line display under 'Products' tab but when I switch to Form view I don't see those dropdown for the corresponding fields, instead those fields appear as input text fields.
    One more thing is some of the fields I can't see in the line view (Item, Product ..) which I see in form view.
    Any help would be highly appriciated.
    Thanks.
    Amit Kade

    Hi Fausto,
    According to your description, my understanding is that the drop-down list boxes of the lookup column became wide when using IE 9 or 10.
    Did you customize the list form in InfoPath?
    Per my test, the width of the drop-down list boxes can be customized in InfoPath.
    I tested in my environment, and the lookup column worked fine in IE 9 or 10.
    I recommend to add the SharePoint site to Compatibility View in IE to see if the issue still occurs.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Issue with function module updated values

    Hi Experts,
    We have an issue with customized program. In this program function module 'BBP_PD_SC_GETDETAIL' not picking
    the updated values when the UI was opened. But when we were executing the same function module directly by providing the values manually it is picking up the correct data.
    We thought it was a problem with session killing or buffer refresh ? We dont know how to handle this issue.
    If you have any suggestions that would be great help full for me . Please reply asap.
    Regards,
    Chandu

    Hi,
    Thanks for your quick reply.
    I have passed the values to the function module in the program and also used the same values for manually testing of the function module. Getting the correct values when I was testing manually.
    We thought it was a session killing problem as we developed the customized code. So any idea how to refresh the session even
    though the UI(User Interface) was opened.
    This issue was solved when the UI was closed and opened again.
    Any other ideas on this issue ?
    Regards,
    Chandu

  • Issue with setting a default value to a Tabular Form field

    Hi -
    I'm running into an issue setting the default value of a tabular form column. I'm trying to set the default value to the row number (#rownum#). This used to work in previous versions, but now it's returning 0. Is there a was to set this value in the default value attribute of the field with a substitution string?
    Thank you in advance for help!

    Share with us what worked in previous versions.
    Jeff

  • Issues with syndication of multi-valued tuple fields

    I'm trying to create a syndication map (using a schema) for a main table in MDM which includes a multi-multivalued tuple.  The map generates an internal error on execution when I have the tuple fields mapped but executes correctly when I leave them unmapped.  Has anybody else experienced this issue?

    Hi Lori,
    The Tuple syndication in MDM 7.1 works slightly differently than a normal lookup or Qualified mapping.
    While syndicating tuple fields we cannot map the lookup Tuple field  which acts as the linking field in the main table.
    However you can map the tuple member fields and MDM syndicator allows you to map and syndicate them.
    I have tried mapping and viewing the same and it works fine with me.
    Hope It Helped
    Thanks & Regards
    Simona Pinto

  • Issue with the field (Trading Partner) in the BW report

    The Info Object 0PCOMPANY (Trading Partner) is having a reference char 0COMPANY in the BW system so the data for the field Trading partner text will be pulled from 0COMPANY_TEXT data source.
    I have checked in the info object 0PCOMPANY in the tab master data / Text under text table properties it has checked in the medium length text exists.
    Even i have checked with R/3 consultants and found the data for all of trading partners but i am not clear where i have to investigate on this issue.
    Now the values for the field Trading Partner were not displayed in the report i have checked the properties of the field and found display as Standard: key and text.
    Any help will be appreciated in advance.
    Thanks
    Ganni

    Hi,
    set the propety "display" to medium text for this charateristic either in the BEx report itself either in the query definition.
    Ensure that the text are well loaded (run tran RSDMD with this IObj in norder to display master data)
    Only having meduim texts will prevent you to display "key and texts" in reports.
    You could enhance your IObj and enable short/long texts as well; in the transfer rules just load the medium text in short (truncate its length to 20) as well as in the long text.
    hope this helps...
    Olivier.

Maybe you are looking for