Issue with hostname "localhost" and general CR connectivity issue

Hello,
we installed SAP BOE with the integrated Tomcat 6. We used a Web Tier installation on the same host, but in different paths.
Tomcat was installed under /usr/sap/tomcat/sap_bobj/tomcat and the SAP BOE package under
/usr/sap/XXX/sap-bobj/enterprise_xi40. The host has two IP addresses, a physical address (A) and a logic address (B).
We want to get a setup that uses the logical address whenever possible.
We have issues with Crystal Reports for Enterprise XI4.0.
When CR ist started from the BI launch pad, then CR ist started and tries to connect to "localhost". The hostname "localhost" is communicated from BI launch pad to CR.
For sure, no communication with "localhost" is possible.
When CR is started manually and a connection to the respective Tomcat server is initiated (port 8080, servername B, context /dswsbobje) we get the
error message. please wait, no connection possible at the moment. I already read and applied SAP KB articles 1598906 and 1601997, but the issue is not solved.
1- Where I can make changes so that BI launch pad will communicate hostname B and not "localhost" to start CR?
2- Is there any local log file on the PC to check why CR can not connect, when started manually?
Best regards Bernd

we have installed BO 4.0 and Its working perfectly. we have using webi reports,
As next step recently we have installed Crystal reports for exterprise XI4.0
But we could not connect with BO server. Please guide us on below req..
Server name:
Server Port No :
Server COntext :
System Display Name :
User Name :
Authentication Type :
Thanks
Pari

Similar Messages

Having issues with face time and messages to connect with people overseas

I seem to have issues with contacting two people who live overseas. I was recently visiting that country and while there had no problems contacting them. Also while en route in /Seoul airport was still able to contact them but when arriving back in -Australia , am no longer able to send or receive messages from them or calls on face time. Similar issues with these contact on viber and talk box. Any ideas?

I seem to have issues with contacting two people who live overseas. I was recently visiting that country and while there had no problems contacting them. Also while en route in /Seoul airport was still able to contact them but when arriving back in -Australia , am no longer able to send or receive messages from them or calls on face time. Similar issues with these contact on viber and talk box. Any ideas?

Developer 6i with patch 18 and oracle 11g connection issue

hi ,
I installed Oracle database 11g on server ,
when login to my application and open any form or report ,get oracle connection
user and password
what should i do ?
please help me

so, canot use dev 6i?I'm afraid you can't. Not certified doesn't necessarily mean it won't work, but if you have problems, you're on your own...
Of course you have two solutions : use 10g DB, or upgrade your forms to 10g. What's the problem for the latter ?

Case sensitivity issue with hostname and sessions

I'm running into a strange issue with mixed cases and my webservice.
I have a JAX-WS service running at my host http://sumac.us.oracle.com/interlace/services/AdminService. When I connect my JAX-WS client to this, using the same URL, I have no problems and the session management code seems to work.
However, if I set my JAX-WS client to connect to http://SUMAC.us.oracle.com/interlace/services/AdminService, the session management doesn't work any more. It seems that the client does not send the JSessionID cookie back to the server.
I did notice that my webservice sends the following Set-Cookie header and the host that is sent in the original request is SUMAC.us.oracle.com
Set-Cookie: JSESSIONID=vWjmMJwJXVLf2LBwYN82rxpqbwyKPP4SpD8kd7zLYVkLDJG2Bnnp!-234350174; path=/interlace; HttpOnly
I'm wondering if anyone has run into this. I'm just using the standard JAX-WS client which is generated from a WSDL file. Let me know if this is sufficient information and I'll add more if necessary.
Thanks,
Anil

I tracked this down and the issue has to do with the CookieJar class used to store the cookie information. It seems that this has already been patched in the JAX-WS 2.2.x line, but I believe that JDK 1.6 u21 uses a version of the 2.1.x branch.
The JAX-WS issue number is 834.

Issues with Exchange Account and Q10

Well, I hate to be writing this, but I'm hoping that there might be someone out there that can help get past some first day issues I am experiencing.
The background: I have a long history with legacy BlackBerry devices, and almost as much history with iOS devices. My most recent phone was an iPhone 4S, and I make extensive use of iCloud to keep my iMacs, iPhone, and iPad connected in real-time. The setup worked. It wasn't perfect, but it worked. However, because I used to have a BlackBerry device (most recent the 9930) and because I don't use the iPhone for more than e-mail, iMessage, and phone calls (generally speaking), I decided to give the newest BlackBerry device a shot. So I bought a Q10.
At this point I feel compelled to say that the hardware is everything I had hoped it to be. It's solid, has a good weight, and appears to be made very well. I have no complaints with the hardware, including the keyboard (a big selling factor for me), so I won't really get into the hardware as the issues I am experiencing all have to do with the OS. Let me also say that I am very familiar with the iCloud integration issues (missing Contact photos and disabled Calendar sync), so I'm not voicing a complaint over those issues in this thread.
I have connected my Exchange account. I used to have everything in Exchange before I moved my entire computing world over to Apple, and now I keep Exchange around for e-mail. Therefore, I have no contacts, no tasks, no notes, very limited calendar entries, and a massive amount of e-mail on the Exchange server. However, to test everything out, I have added a single contact record so I can see it show up on the phone and be able to test two-way sync between the Q10 and Exchange. And here is where the first issues crop up. It looks like Exchange connects and then disconnects at random. For example, if I open my Contacts on the phone, I see the one contact (called John Doe). Then, as the phone is sitting there with the screen on, the contact will disappear and I will see a "Start adding contact to your contact list" notice on the screen. Then, after a short period of time, the single contact will return. It is important to note that the entire time this is happening, the All Contacts option is selected in the list so that all available contacts are shown. Additionally, I have SIM card contacts turned off, but if I alter the selection in the view list (All Contacts, Favorites, etc.), the SIM contacts will re-appear when I return to the All Contacts view. At the same time, even though I have turned off SIM Contacts in the settings, the setting has reverted to show SIM Contacts. If I turn off the setting again, SIM Contacts still show up. Possibly related: I can't delete contacts on the SIM card, no matter how many times I try, and it now it seems that I can't get SIM Contacts to go away in the Contacts app.
Likewise, Exchange seems to connect and disconnect from Calendar. I go to the calendar and move day by day to June 15th. I see an entry that I know is from Exchange (I have no other connected calendars at this time), and it is in blue. I change the calendar color to green and the entry changes color, as expected. However, if I jump back to today and then scroll day by day to get to June 15th again, the calendar entry is missing. After a few seconds, the entry re-appears, but it is, once again, in blue. The setting has reverted itself, and it seems like Exchange is completely disconnecting and automatically reconnecting to the phone like I am setting it up again for the first time. Very odd. As I'm typing this, I just saw something odd. I swiped to wake up the phone, and the active frames screen was the visible screen. The calendar app is still running (since I left it running, minimized, when the phone went to sleep) and the date shown in the active card was Jan 1, not Jun 8. Why? The date (and time) on the phone is correct and is set automatically by the cellular system.
Nevertheless, looking at BlackBerry Hub, I see only two e-mails in my Inbox from Exchange, even though I have roughly a dozen in my Inbox. The rest are filed in sub-folders. And bam! Just like that... I get the "Add Accounts" screen while looking at the Hub. In other words, as I was typing this, I first saw two Exchange e-mails and then, out of nowhere, the e-mails disappear and I see the "Add Accounts" screen as if no account has been connected.
So... first question: Is anyone else experiencing this issue? This is very strange, and very frustrating. Second: could this be related to the large amount of e-mails I have stored on Exchange, some of which have large attachments? I selected "Forever" as the sync history length. I have my concerns, however, if this is related to loading historical e-mails onto the phone (in other words, the first sync with Exchange) because there is no reason that I can understand that the phone would blank out as if no account was connected at all. I can understand lag and stuttering while the history is syncing, but not a complete disconnect and reconnect. Considering all of the issues with the one and only contact record disappearing, the calendar entry for Jun 15th disappearing and then reappearing with the wrong calendar color, and e-mail in my Inbox incomplete (two of a dozen e-mails) and ultimately disappearing, I feel like this OS just has some real, significant issues.
Full disclosure: I do want iCloud to work and am a fan of Apple products, but the lack of full iCloud sync support is not a big enough issue for me to want to send back this phone and/or see it fail so miserably. I will happily move my info from iCloud into Exchange, Google, and/or set up a new Exchange account for personal use (Office 365) because I am not wedded to iCloud per se. But, I won't go through that trouble if I can't even get my first account to work properly. It should also be noted that I do have a basic Google account (non-paid) and I had previously attempted to connect to it. However, I was experiencing the exact same issues with contacts disappearing, e-mail disappearing, etc. So I deleted that account. Truth be told, I deleted the Exchange account as well, and then re-connected to Exchange only to test one account at a time. Unfortunately, even with Exchange only, I am seeing very strange and frustrating behavior as described above.
Help... please. I want this to work but the frustration I am feeling is growing worse by the hour.
Model: SQN100-2
OS Release: 10.1.0.2011
OS Version: 10.1.0.2038
Build ID: 525050
Ian

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

I have an issue with the tabs and windows disappearing....?

I have a constant problem with Firefox now. I notice that with Firefox 4 and 5 there has been a reoccurring problem with the tabs and windows closing on their own. If I have more than one window open, one of them will suddenly disappear and I wont see the tab at the bottom anymore until I click out of the one I am currently on. It is very annoying and only when I get out of Firefox completely will it sometimes reappear. Even more frightening is the fact that when I move the mouse downward to the bottom of the page the page shuts out as if I clicked out of it.
I am wondering if this is a security issue meaning some type of malware or virus that is manipulating my browser or is this a common issue that has some unknown cause? I would like to know what the cause is and how it can be fixed because it annoys me all the time. Please help!!

No Issue with the voltage in general. iPad is being charged via USB.
1. If you connect it directly to the computer - no problem.
2. If you want to charge it directly from the power socket you will need this:
http://store.apple.com/uk/product/MB706B/B/apple-usb-power-adapter
TZ

Issues with flvplayback component and domain names

I have fms running on linux with an apache webserver on the same machine and I'm have some issues regarding domain-names.
I have done the Walkthrough 2. Simple FLVPlayback 2.5 component which works nicely on my local machine using linux (and also on virtualized Windows). Locally it doesn't matter if I use my IP-adress or my domain-name, it all works fine. However, when I host the swf (on my local machine) and access it from another computer the video does not play. The player doesn't seem to load the flv. However looking at the fms-access-log it looks like a succesfull atempt, it connects, starts playing and transfers some data. I have a crossdomain-file in my apache root. I have tried using both domain names and IP-adresses accessing the swf and the flv. Also copying the swf to the other computer doesn't seem to help.
Another issue that might be the same problem(?) is that when I try loading an flv with another player (also hosted on my local machine) I can get it to work from that other computer (and locally), but only when giving the IP-adress. When using the domain-name it will not work and there is no activity in the access-log.
I have searched quite a bit without finding anything that solves this.
Any help is appreciated.
/Erik

I should add that the two computers are on the same local network. In the swf I access the app: rtmp://computer1.domain/vod/ or give the IP and then state the streams as in the tutorial.
Also, has anybody had any issues with hostnames vs IPs in rtmp-urls?
Feeling a bit lost tbh.
/Erik

Issues with iCloud synchronisation and contacts over two or more devices. iTouch and iPad2 sync with different results from iMac. Thoughts?

Has any one experienced issues with iCloud synchronisation and contacts over two or more devices? The primary machine is an iMac running Lion. Address Book was created from vcf file (backup of address book prior to moving to iCloud). iTouch replicates Contacts just fine and matches the Address Book on the iMac. The iPad 2 does not showing only 123 contacts where there should be 200. I have turned off iCloud on both devices thus erasing the iCloud content of both devices and staring from scratch with both devices with identical results. Even turned off iCloud on the iMac and erased the Address Book and rebuilt with the same results. Anyone have any ideas or suggestions? I am going nuts.....

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

Just wondering what Apple's stand is on the issue with a flickering and a dark area appearing on imac 27"screen - forums seem to indicate this is not uncommon - and happens through normal use - so should be subject to repair (Sale of Goods Act - 6 years)

Just wondering what Apple's stand is on the issue with a flickering and a dark area appearing on imac 27"screen - forums seem to indicate this is not uncommon - and happens through normal use - so should be subject to repair (Sale of Goods Act - ie 6 year warranty)

We are just users like yourself. If Apple has stated publicly about the problems you mentioned, it will be listed on their website and/or in one of their Knowledge Base Articles.
I have a 27" & do not suffer from such a problem. You should keep in mind that these are technical support forums. Generally, the only people posting here are those with problems. The thousands/millions without problems don't ever come here.
Think of these forums as a hospital emergency room.

I cant connect to my computer with my ipod and itunes wont connect to it either. also i have forgotten my ipod passcode

i cant connect to my computer with my ipod and itunes wont connect to it either. also i have forgotten my ipod passcode

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
And if necessary
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Hi, I have an issue with Photoshop CC and Lightroom

Hi, I have an issue with Photoshop CC and Lightroom. I purchased a subscription the other day, they told me to install the CC app to install these. I installed the app, logged on and it still says trial version. How can I solve this? Could I be that the subscription is not activated yet?

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Issues with Car Bluetooth and the 9630

Hey guys,
Over at the crackberry forums there are many people reporting issues with the tour and car bluetooth. Basically, for people that are syncing the tour with the bluetooth in their cars, people can barely hear them. We can hear everyone just fine, but when talking the person on the other end reports that our voice is very low. This is happening on VZW, Sprint, Bell and Telus, which leads me to belive this is an issue with the OS itself. The link to the discussion at crackberry is http://forums.crackberry.com/f141/car-bluetooth-tour-issue-they-can-t-hear-me-well-267206/ I'm hoping someone from RIM cam comment on this or provide some help. This is a VERY frustrating issue to Tour owners especially with so many places having "hands free" laws.
Thanks!

Greetings from Charleston!
I was using a Verizon 8830 World Edition until I upgraded to the Verizon Blackberry Tour on launch day July 12. I never had any Bluetooth issues before and I'm not having any now. As a matter of fact, I would say the quality is a tad better. My volume is controlled by my car when the Blackberry is connected via Bluetooth and I've actually had to turn it down sometimes because it has been so loud. I drive a 2007 Toyota Landcruiser. I suspect it has less to do with the Blackberry than it does with the car. Perhaps there's a Bluetooth software/firmware update necessary for some of your vehicles?
All in all, I love this new Blackberry!!
Cheers!

Contribute 3 and Dreamweaver 8 Connection Issues

Hello,
I'm having issues finalizing my site definition at the
"Contribute" stage in Dreamweaver.
When I test the connection from Dreamweaver's "Remote Info"
stage, Dreamweaver successfully connects to the main directory: "
http://domain.edu" (domain.edu), where
I upload files to the main site (not connected to Contribute), but
I want to connect contribute to a mini site in a subdirectory of
the main site - "
http://domain.edu/folder/folder".
I'm stuck at the point where I click "Administer Site in
Contribute" in the "Site Definition" dialog box. This is the first
time I've set up a site in Dreamweaver with Contribute
compatibility and a remote connection, so I have not run into this
before.
Everything was going fine until the "Contribute" panel.
The Site root URL in the dialog box originally pointed to the
index file of the existing mini site sitting on the server: "
http://domain.edu/folder/folder/index.htm".
When I click the "Test" button, I keep getting the error
message:
"Dreamweaver could not connect to the remote server... Please
fix the remote connection before continuing"
So, I changed the Site root URL to point to the root folder
of the mini site:"
http://domain.edu/folder/folder/index.htm"
Then I got this error message:
"Dreamweaver could not find a page at the specified site root
URL"
I changed it back to the original URL and went back to the
"Remote Info" dialog. I thought that maybe the problem was that I
was supposed to change the host directory to "domain/folder/folder"
(from "domain") to reflect the exact folder that the mini site was
stored in, but when I did, I got an access denied error.
I am at a complete loss, please help...
I am using:
Dreamweaver 8
Contribute 3
Windows XP
Has anyone gotten an answer to this problem? I have seen many
threads in both the Dreamweaver and Contribute forums, but nothing
looked like a solution or explanation of why this occurs. Please
Help. I would like to use this tool throughout our college
campuses, but I am loosing faith in this product. I know that If
I'm having trouble, novice users will completely reject this
technology...
-Ena

OK, Now I'm REALLY confused
I gave up on trying to connect Contribute to my website
through Dreamweaver. I figured I'd go back to Contribute and see if
I could get the connection directly from Contribute. Somehow, It
worked. I think I went to Edit > My Connections > Create...
> and entered my FTP information and it worked! I still cannot
connect through DW however.
So far, this has allowed me to continue with setting up this
site with Contribute. I'm still really confused as to what the
problem is with Dreamweaver and Contribute working together.
I'm going to go back and make sure that I can repeat whatever
I did to get it working. The only thing worse than not being able
to get something to work is stumbling upon the solution and not
knowing how you did it
-Ena

Apple Support admitted an Issue with WEP authentication and some Routers

After reading many posts here and other places I logged a service call to Apple support. With the particulars: AT&T U-verse 2 Wire router would not connect with WEP would connect with Security disabled. I wanted a call logged before I went past the return time
I got a call back immediately after a few basic questions I was passed to a product manager for ipads, it seems connectivity issues are taken seriously.
The upper level support said there were known issues with some routers and WEP security we steeped through changing the security and it works fine now.
Bottom Line:
Apple knows there is an issue with some routers
They were very helpful and acknowledged the issue.
He even stayed on the line while I reconfigured one of my Windows PC to make sure it connected to the new settings
I suggest to all to log a call and get a tech support involved before taking the iPad to the local store
They certainly new their are some connectivity issues. If that does not work you can always return it.
He did not admit it was a Apple issue and did not commit that Apple was working on it but it is something they are aware of.
So skip the Apple store got right to tech support.
Just my 2 cents.

"But folks need to go straight to tech support. I live in oz, so it will be interesting to see if they help me.. or not.. but if support gets inundated they will fix it or have a massive recall (not likely on the latter)."
Can't agree more. I used to manage a tech support department and it is all about the numbers. No matter how many forum entries the issues that get addressed are dictated by the reports.
So for those that are buying new routers contact Tech Support first even if you end up getting a new router the call is logged that will get Apple's attention.
People that are not familiar with post launch processes have no idea how things that need to get corrected and enhanced are dictated by support requests

Is the Time Capsule wi-fi router compatible with the Nest thermostat? I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?

I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?
If so, i already have a wi-fi router, so can the Time Capsule simply be used for wireless backup instead of as a router if there is conflict?

A TC is fundamentally a AE with a sata chip included to drive the hard disk. Some slightly different bios to include disk functions, although most of those are also on the AE. So as a router it is 99.999% identical.
And yes, if you have another router you can easily bridge the TC and use wireless for backups and internet connection. Once you no longer route through the TC the issues with most NAT problems including port forwarding should disappear.. mostly this is due to all apple routers using NAT-PMP instead of upnp which is the near universal standard for opening ports.. without upnp apple keep their routers more exclusive.

Issue with hostname "localhost" and general CR connectivity issue

Similar Messages

Maybe you are looking for