Issue with infopath forum

Hi
We have set up an InfoPath form with a data connection and is web enabled.
But when we come to connect it says its not web enabled.
How do I re publish with this option enabled rather than having to redo the who form?
Thanks

Hi Gopikishan,
From your description, when Approver2 click Open this task in Outlook, no Approve button displayed on the form. If I misunderstood, please point it out.
I created a simple approval workflow in SharePoint Designer and assigned it to Admin and user1, choosing serial (one at a time). As I could see in the workflow setting page, there is only one form in Forms block. And I opened it in my InfoPath form, it displayed
as I clicked Open this task in Outlook.
So I’d recommend you check if there is more than one form in workflow setting page. And also check if there is any rule which will affect on whether Approval button shows or not.
Regards,
Rebecca Tu
TechNet Community Support

Similar Messages

Permissions Issue with Infopath Data Connection

I'm not really sure how else to title this....
Issue - InfoPath Form on SharePoint 2010 gives 'You do not have permissions to access a SharePoint list that contains data required for this form to function correctly."
It gives a correlation ID
Log file shows
"Exception Message: The form cannot run the specified query. The list could not be found."
Note the look-up is to a SharePoint list on the same content database.
We have two Web-Front End servers with a load balancer. We've had a number of other permissions type issues when the 'token' gets switched from one server to another, so we have the HOSTs file on each server pointing back to itself, so that once a
server is 'grabbed' it stays on the same one.
The error we are having currently, only seems to be occurring on the first Web Front End Server.
Also we have sharepoint setup with an address of
http://sharepoint.domain.com as well as an alias. http://sharepoint.
The error we are having currently, only occurs if I use the fully qualified domain
" http://sharepoint.domain.com" on the InfoPath data connection. If I use the shortened alias, the error does not occur. That is the current/easy solution, but I would like
to fix it 'correctly' if possible.
So, it appears to me that only on one of the Web Front End servers, it isn't liking the fully qualified path when doing a data connection.

Hi ,
Is the above issue fixed . if not please check below option
Check the List / Library [Source for dataconnection ] permission setting .
If the permission is unique [ restricted from root site]. we will the above type error message
Velu K

Domain level security issue with InfoPath Form

I have followed the article “Submitting Data from InfoPath 2007 to a SharePoint List” which can be found at
http://msdn.microsoft.com/en-us/library/cc162745.aspx.
But instead I am using SharePoint and InfoPath 2010.
I get the following error after deploying and running the form with its security level set to domain.
“A query to retrieve form data cannot be completed because this action would violate cross-domain restrictions. If this form template is published to a SharePoint
document library, cross-domain access for user form templates must be enabled under InfoPath Forms Services in SharePoint Central Administration, and the data connection settings must be stored in a UDC file in a data connection library in the same site collection.
If this is an administrator-approved form template, the security level of the form must be set to full trust, or the data connection settings must be stored in a UDC file by using the Manage data connection files option under InfoPath Forms Services in SharePoint
Central Administration.”
How do I get this form working on the server and client using domain level security?
Extra Note: On an additional not the form works fine in SharePoint and InfoPath designer when the security level is set to Full Trust.

Hi, Is this possible over a SharePoint "LIST"? I'm hitting brick walls and can't set the Security level on my form at all. Everything that I'm reading refers to Document Libraries but nothing about SharePoint List. It seems that this should work over a list,
but I'm hitting brick walls all the way around. Here is a copy of the question that I posed below under Todd.Wilder's post:
Hi,
Following this forum question/comment I am attempting to set the security on my Infopath form to Full Trust. But, I don't have the Security and Trust option. I can set the Trusted Location through the Trust Center but I can't find anywhere to set security.
I am using InfoPath 2010. What am I missing? Everything that I'm reading says that this is the problem and my error message is exactly like SomeGuy's message. One more piece to this is...this is a form over an Existing SharePoint List. I've found that I can
see the Security if I start InfoPath and start a New Blank Form, but by editing the form from a SharePont list, the option to edit Security is not there. HELP!!
I am following the instructions below that come from:
http://msdn.microsoft.com/en-us/library/ee526352.aspx
The InfoPath form designer automatically selects the appropriate security level (either Restricted or Domain) based on the features that you are using in the form. The security setting is always as restrictive as possible, starting at Restricted, to help
ensure a greater level of protection for you and your data. Users can manually override this automated setting to select a level of security that is more appropriate for the form by following these steps:
Click the File tab, and then click Form Options on theInfo tab.
In the Categories list, click Security and Trust.
Uncheck the Automatically determine security level (recommended) check box.
Select the desired security level.
Thank you,
~Tina~
~Tina~

Issue with flipping of strings in jsff page

We are facing the following issue with strings of type A:B in Arabic language.
In the UI, all A:B strings are supposed to be shown as B:A in Arabic, where A is a TOKEN value and B is a TRANSLATABLE STRING. But this is not happening in the UI.
So a String that is shown as ORG4-V1:Segment Values in English,we expect it to be shown as Segment Values : ORG4-V1 in Arabic, but it is displayed as ORG4-V1:Segment Values in Arabic also.
Following expression is used for displaying the string :
<af:showDetailHeader text="#{bindings.ValStructureCode}#{(bindings.ValStructureCode.inputValue==null) ? null:':'{CstCoreSetupGenBundle['Header.CostingAttributes']}"
This is shown as ASSET Default: Costing Attributes in the UI while it should be Costing Attributes : Asset Default (Here 'Asset Default' is the ValStructureCode)
For further details please refer to bug#11934853

I apologize for the above and the thread has been posted here as I was unable to access the correct category due to some technical issues with Oracle forums. Also, the mentioned issue is in critical state and has a deadline so thought of posting to get it resolved as soon as possible. Specific categorization will be surely taken care in future.
Moving the thread to below location:
http://myforums.oracle.com/jive3/thread.jspa?threadID=1023776
Edited by: 931435 on Jun 6, 2012 12:25 AM

Issue With Similar Search Strings in EBS

Hi Everybody, I'm experiencing some issue regarding a Search String that I have, the config is very similar, the only difference between one and the other is that there's a specific posting rule for one particular account.
EG: Search String 1: (^)ACCOUNT TRANSFER TRSF TO( |$)
Search String 2:(^)ACCOUNT TRANSFER TRSF TO 1111111111( |$)
(Where 1111111111 is the bank account)
Same Extenral transaction, NTRF, Same house bank and account id. Same Comapny also
But when executing a Statement with the 1st one it works fine, but when runing the 2nd one it does not use any of them(it takes the Posting rule set for NTRF in the EBS configuration).
I've tested it in the SS test and it takes the right posting rule.
If you have any clue on this I'll really appreciate it.
Regards
Luciano

I apologize for the above and the thread has been posted here as I was unable to access the correct category due to some technical issues with Oracle forums. Also, the mentioned issue is in critical state and has a deadline so thought of posting to get it resolved as soon as possible. Specific categorization will be surely taken care in future.
Moving the thread to below location:
http://myforums.oracle.com/jive3/thread.jspa?threadID=1023776
Edited by: 931435 on Jun 6, 2012 12:25 AM

Font size issue with the email functionality of infopath form

Hi,
We have a SharePoint list created and customised the form to send the form via email using email functionality in infopath form.
We have made the font size of the form fields( rich text box) to 11. But it is showing as 10 in email. Also for a text box we set the font size to 14. But it is 13.5 in the email.
Could anyone please let me know how to fix this issue?

http://social.technet.microsoft.com/Forums/sharepoint/en-US/afbd9fc3-b8d3-4ef9-a8bf-9cb136d12039/formatting-problem-with-email-from-an-browser-enabled-infopath-2010-form-in-sharepoint-2010?forum=sharepointcustomizationprevious
Yes, this is normal. Forms Services has to convert the form to an aspx page, and things get lost in translation when this gets submitted via email. My workaround has always been to set static widths to columns/controls, but you said that didn't work
for you? It's always worked for me.
https://go4answers.webhost4life.com/Example/infopath-send-form-email-162481.aspx
http://www.formotus.com/15413/blog-infopath/making-the-most-of-email-submit-with-infopath-and-formotus-forms

Just wondering what Apple's stand is on the issue with a flickering and a dark area appearing on imac 27"screen - forums seem to indicate this is not uncommon - and happens through normal use - so should be subject to repair (Sale of Goods Act - 6 years)

Just wondering what Apple's stand is on the issue with a flickering and a dark area appearing on imac 27"screen - forums seem to indicate this is not uncommon - and happens through normal use - so should be subject to repair (Sale of Goods Act - ie 6 year warranty)

We are just users like yourself. If Apple has stated publicly about the problems you mentioned, it will be listed on their website and/or in one of their Knowledge Base Articles.
I have a 27" & do not suffer from such a problem. You should keep in mind that these are technical support forums. Generally, the only people posting here are those with problems. The thousands/millions without problems don't ever come here.
Think of these forums as a hospital emergency room.

Where is the forum for Windows Update issues with Windows 10 TP 9926

Trying to find a fix to the Windows Update issue with Windows 10 TP 9926 build and can't find the correct forum to post this question?
This will impact receiving the new build upgrades and will impact test strategy for the new supported OS in our desktop application.

Might try them over here.
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1427037339534
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Is my iPhone 4 greyed out wifi and non working bluetooth software or hardware... seems that the forums are full of this issue with no consistent or official answer. is it all coincidence that so many are having the problem? Please help...

Is my iPhone 4 greyed out wifi and non working bluetooth software or hardware... seems that the forums are full of this issue with no consistent or official answer. is it all coincidence that so many are having the problem? Please help... I have scoured the net trying everything the last few days.

Please correct your porfile: iPhone 4 do not have IOS 6.1.4.
The usual troubleshooting steps are, also remember to test it after every step:
1. Restart
2. Reset
3. Restore from backup
4. Restore as new.
If no joy, make an Appointment with the Apple genius and have them evaluate

Ok so I am having issues with charging my iPad as well. So I took advice from this forum and yes, if you turn the brightness down my iPad charges. Thanks Apple I just went and spent money on a new charger I didn't need. Really you need to fix this issue.

Ok so I am having issues with charging my iPad as well. So I took advice from this forum and yes, if you turn the brightness down my iPad charges. Thanks Apple I just went and spent money on a new charger I didn't need. Really you need to fix this issue.

Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help.

I had an issue when trying to register with the forums, but I am having problems speaking someone because I am not a "registered" member?

Dear forum member(s), I was excited at the possibilities that Firefox offered. I have been looking forward to researching on the forums, but I made a blunder when registering.
I changed my email password some time ago and forgot that I had done so. I also have a second email which is similar to my address I was registering and I think I was actually using my the second email information until I caught the mistake.
Shortly thereafter I received an email with my user ID but no password. I had been assuming that I would receive a onetime computer generated password, but I wasn’t sure how things were supposed to go. After closely studying the language of the email, I was led to the conclusion that I would login with my original information I had provided.
My final attempt to register failed and I can’t explain why. I am positive that I had the right user id and password and now I am in limbo. I registered with the "Add-ons" section in 15 minutes. I was never told I was banned, but I was never told I am now a member. Thanks for reading.
Sincerely,
reel4

Not at all. I have never posted to the forums. The only thing I have written is what you see in this thread. I registered at add-ons section and things were fine. I wanted to use the forums, because I like to learn what I can. The problems began when I tried to register at the forms. At first, I thought my login from add-ons would work at the forums. It didn't. I honestly don't know if there is separate login and validation for each firefox/mozilla section.
When I attempted to register with the forums, I messed up when trying to login because I made too many attempts. I was either using another password from a second email or I misread those weird words they use to make sure you are not a bot.
I don't know what exactly was written but they basically wanted to take a look at things. I felt that was reasonable. After all - I felt like a moron for not being able to read those contorted word tests.
Then they sent me my user id but with no new password so I assumed my current password was the same as the one I originally gave. Long story short, I tried to login again- all three times I failed. They never banned me or told me anything. I have not heard from anyone or thing. To It's like they have just walked away. I just don't understand what has happened and why no one will tell me anything. So... no - I am not banned. When I do bet blocked after I logoff, it has the same effect as a ban. I guess I have been ousted. I just wish this I could get this matter resolved. I changed my password and email so maybe that will keep around.
It's a strange situation and I am at loss for words. I even wrote the forum people an apology letter describing the facts above in details and apologizing for the inconvenience. I actually apologized for being an idiot.
One last thing - at the outset of the post - I told you they gave me one last opportunity to login and it failed. I know for a fact I had the information correct. I had even written my password somewhere else on the screen to where I could see each character to verify the pass word was correct and then cut and paste.
James - who knows what the future holds but I must thank you my friend. At the very least, I could tell my story. It is all so strange.

Multiple Issues with Adobe Creative Cloud app.

I'm having multiple issues with the Adobe Creative Cloud app.
1. Neither Photoshop CC nor Prelude CC get past the 47% mark when installing. They constantly give me "Installation Failed" messages. When I click on "Learn More", I'm told that:
"Installation Failed
Errors during Installation.(7)
More Information"
So naturally, I click on More Information to get the following thrown at me (none of which I understand):
Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s) ERROR: 12/01/13 13:16:06:425 | [INFO] | | OOBE | DE | | | | 6076 | ---------- CustomHook_Helperx64 ---- Start ---------- 12/01/13 13:16:06:426 | [ERROR] | | OOBE | DE | | | | 6076 | Cannot load function name 'CSInstallerCustomHookProc' from library C:\Program Files (x86)\Common Files\Adobe\Installers\uninstall\{5F816B76-62F3-41C9-B651-27F49F25F50B}.data. Error 0 ERROR: System check returned with error : -4 -------------------------------------------------------------------------------------
2. I installed Lightroom 5, then uninstalled it. When I went back to re-install it, the Adobe Creative Cloud app wouldn't let me. It states that my Lightroom 5 is "Up to date" and is in my "Your Apps" section, not in the "Find New Apps" section. I've double checked my Programs and Features in Control Panel, and it's not there. I cleaned my registry, and it's still there. I deleted the "opm.db" file in my OOBE folder, and restarted CC - still nothing.
I've got to say, guys. I'm not very happy with the amount of time I've spent just trying to install programs on my PC. While the plan is for this to be intuitive at some point, it's not very functional at the moment. Any help you can provide me would be amazing - if you can provide it sooner than later, I'd be over the moon.
Thanks.

I fixed it. I fixed it on my own. My journey took over a week (forty hours of back and forths, trial and error, and service!!) and included multiple calls, multiple online chats, unanswered forum posts, Twitter conversations with the Adobe Customer Service team, remote access sessions with Adobe technical teams, and finally this series of emails. In the end, I had to figure it out myself. I'm not happy - not with the time it took, and not with the level service I received based on the urgency that I made clear.
For anyone else that had this issue (or similar), here is what I did to fix it. This may seem excessive, but that's because I didn't know what else to do. Some of these steps may be redundant, or not required... but I wouldn't know because once I saw that it was working, I just kept going.
Anyway, here is the solution I came upon (I'm running Windows 7 64-bit):
1) I uninstalled every single Adobe product (including Flash Player, Acrobat Player, Air, and Digital Editions).
2) I ran the Cleaner Tool (which is not very good) and came across errors in trying to delete certain folders.
3) I restarted my computer in Safe Mode, and logged into Windows 7 under my Administrator account.
4) I manually went into every folder that contained the words "Adobe" and deleted everything. This includes my Program Data folder, my Program Files folders (both x86 and 64-bit), my AppData folders, my Roaming folders, my Temp folders - ANYTHING and EVERYTHING that contained any trace of Adobe, I deleted.
5) I ran Microsoft Disk Cleanup and Piriform CCleaner to clean my registry and temp files.
6) I restarted my computer using the normal boot process and logged into Windows as Administrator.
7) I downloaded the Adobe Creative Cloud installer.
8) I restarted my computer again, and logged into Windows as Administrator.
9) I ran the Creative Cloud installer, and installed Premiere Pro.
10) I restarted my computer again, and logged into Windows as Administrator.
11) I ran the Creative Cloud installer, and installed Photoshop.
12) I restarted my computer again, and logged into Windows as Administrator.
13, 14, 15...) I ran the Creative Cloud installer and installed whatever programs I needed, then I IMMEDIATELY restarted my computer before installing anything else.
Hope this helps. Good luck!

Issues with logging in to CC and missing features

My team is using CC on corporate environment PCs, Win 7 64bit. Some of the problems we have seen are:
When we buy a new adobe license for a new user our IT department has to install the Creative Cloud desktop manager and software on their PC. They do this by using an admin windows account and the new adobe login. Everything works fine for them, they are able to log in to CC and install the software, When the user logs in with their windows account and try to log in to CC with the same adobe id then they get the common issue with the sync button just turning and never logs them in. In some cases this is fixed by deleting the OOBE folder from the admin local profile allowing the other user to log in to CC but most times the IT has to resolve to rebuilding the PC and starting again.
We also hotdesk in my team.I found that when i work on my laptop or another desktop pc in the team everything is fine but if i have to use a different PC for the day i log in but don't have all the features (I can get the home feed, fonts, etc, but not the app installers)
Another member of my team works fine on that same PC but on a different PC she doesn't have all features. She gets the app installers, but not some of the other features.
It all seems to be a bit random as to who can access what.
Our corporate firewall is open to most Adobe servers, unless there is something we have missed. PCs have Adobe Air 3.1.0.4880.
These issues have been happening for months now and IT have spend hours to resolve.
Anyone else has issues using Creative Cloud in a corporate environment and are there any suggestions we can use please?

There isn't any capability for the OpenBootProm prompt
(the OK prompt you might see on your screen)
to ask you for a username or a password.
The OBP is a firmware level of the SPARC platform, not an OS nor a mini-OS.
If you have consoled in through the SF280R's RSC card, it might have its own password prompt, but the OBP itself can't do that. Additionally, the RSC doesn't show you the OK prompt either (certainly not to the extent that the more sophisticated LOM, ALOM, ILOM or System Controllers of other system designs might have.).
You made mention that you eventually see a cursor that is sitting at a prompt that shows:
Happy@solaris11 $If that is what you see, then I think you're already logged into the OS. That would seem to be a C-shell prompt, with you logged into a fully booted system named "solaris11" as username "Happy".
Consequently, I'll be asking that your post be moved out of the Servers'General hardware forum, and into the General Solaris 11 forum. You don't seem to have a hardware issue, but perhaps just an issue with being unfamiliar with Solaris. (You didn't describe your experience level in the initial post.)

SSO logout issue with APEX

I am trying to resolve the logout URL issue with our APEX application configured as a partner application with SSO. The partner application name is SSO_APEX and the logout URL is defined in partner application as
http://OID_Server:7777/pls/orasso/orasso.wwsso_app_admin.ls_logout where OID_Server is our OID server name.
In the APEX application page, I tried to open the application that was imported from another apex server.
Home>Application Builder>Application 107>Shared Components>Authentication Schemes
SSO_Auth - current is
&INFRA_NAME./pls/orasso/ORASSO.wwsso_app_admin.ls_logout?p_done_url=&SERVER_NAME./pls/htmldb/f?p=&APP_ID.
The logout link is http://INFRA_NAME:7777/pls/orasso/ORASSO.wwsso_app_admin.ls_logout?p_done_url=http://SERVER_NAME/pls/cms/f?p=107 , The application is retrieving the INFRA_NAME and SERVER_NAME values from a database table and they correspond to the OID and 10g application servers respectively.
The logout link should take it to the login page where the user will be prompted to enter login credentials again however it is currently taking to the above logout link page from APEX. It is not changing even though I specified a different logout link in partner application page. Moreover the check box beside SSO_APEX in the logout page is unchecked.
The authentication scheme of application is overriding the partner application configuration. How can I make sure the logout is actually happening? Thanks in advance for any suggestions.
Pavan.

Scott,
I am having the same issue, and have posted on another thread about this same thing. I know that's inappropriate to post the same thing in multiple threads, but I was searching the forum again today, and Pavan described exactly what I'm experiencing.
We have been using SSO for about 4 years or so now, and haven't had logout issues. Our DBA at the time had written his own logout function for SSO where he invalidated the cookie with owa_cookie calls. It's worked until now. We have upgraded our database servers and all URLs referencing those servers are now in a different domain than our OAS server. Now the logic in the logout function is no longer invalidating the cookie for SSO (because it's in a different domain). SSO login and authentication still work, it's just the logout that does not.
I'd like to just alter the logout URL to redirect to the OAS server for logout as you described. But here's what's happening. I press logout link, and it takes me to the OAS Single Sign-Off page where it shows the services it's logging you out of, but it doesn't automatically redirect (just sits there until I press the Return button).
Is that expected (no automatic redirect)?
And as Pavan mentioned, the Partner application name (APEX_SERVERNAME_SSO) doesn't show a checkmark next to it. If I go back to my application, I get right back in without being prompted for SSO (ie, not logging out successfully then).
I know there are a lot of question marks here, but I'm not sure if there's something obvious I am missing or if there's something else I need to fix that I don't know about.
Can you offer any guidance?
Thank you for your time,
Chris

HP Envy 15-j075nr - Issues with gaming performance (slow-motion gaming)

SPECS:
Display: 15.6" diagonal HD BrightView LED-backlit display (1366 x 768)
Memory: 8GB installed memory
Hard drive: 750GB 5400RPM hard drive with HP ProtectSmart Hard Drive Protection
Processor: AMD Elite Quad-Core A10-5750M Accelerated Processor
Operating system:Windows 8
Graphics card: AMD Radeon HD 8650G graphics with up to 4204MB total graphics memory
Running on the exact specs above, I'm playing games via Steam (Tomb Raider, Saints Row IV, Dishonored, etc) and have had to compromise video/display quality settings just to get the games to play correctly. Most games have an auto-detect feature for display and audio settings and in each instance the games are set to Ultra or High settings. But when I begin to the play the games with the default settings that games are extremely slow, though the graphics look great.
Given the specs above and the fact that the games auto detect at the highest or near to the highest settings, might I have an issue with my current system settings that I could tweak in order to get a higher quality gaming experience? I feel like these settings are definitely good enough to get at least HIGH display quality, but that has yet to work.

Hi @trickster878
I understand you are having performance issues with games on your notebook computer, but really notebook computers for the most part are not intended to be gaming machines. Their design focus is more to be light weight and portable while also providing the ability to run for two hours or more without a power connection when fully charged.
Many of the things that make for a good gaming machine are sacrificed in a notebook. All that being said, it is possible to play many games on notebooks, but rarely as well as it would work on a desktop computer.
It is likely that you can tweak the settings to get a compromise that is more playable, but it is often a robbing Peter to pay Paul situation. Something may have to be sacrificed.
You can take a look at these pages and see if anything helps.
Computer Locks Up or Freezes When Playing a Game
HP PCs - Improving System Performance without Adding Memory (Windows 8)
Otherwise, you would probably need to look at the video settings in each of the games you are trying to play. The settings will need to be customized for each of them, and you may have to look at the pages/forums for the individual game to see which setting may have to be changed internal to that game.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Issue with infopath forum

Similar Messages

Maybe you are looking for