Issue with JMS adapter

Hi All,
I am trying to produce a message into JMS queue from BPEL, for this purpose i have created a connection factory, Queue and connection pool inside console and everything is fine. When i am testing the bpel process, I am able to see that message is written into jms queue with the help of payload inside em. But, I am unable to view the same messages inside the queue that I has created, but the property 'Messages High' of the queue is showing the count of messages it received. I dont see any error in logs, Can I know what I am doing wrong here?
Thanks,

Hi,
If there's something consuming the messages you won't be able to see them...
Go to the weblogic console and pause your queue for consumption in the control tab, publish a message and you will be able to see it on Monitoring tab...
Cheers,
Vlad

Similar Messages

Issue with JMS inbound Adapter and Asynchronous BPEL

Hi Gurus,
I am facing the below issue with JMS inbound Adapter and Asynchronous BPEL .
I have 2 JMS Queues one inbound and one outbound . The Composite has multiple BPEL Components around 4 on an average and i have 4 composites similar to that .
Totally 4 Composites * 4 BPEL Components = 16 Services
Propoesd Solution :
I have used MessageSelector in the JMS Adapter for selecting the incoming message. The BPEL gets invoked if the message selector is true and proceses the Message and writes the response to the other Queue.
Initially i had no problems but intermittantly the BPEL processes are getting invoked but they are not processing the data ( Bpel process is supposed to invoke an external service and get the response in a sync call) and each BPEL processe instance is in running state for ever . This remains even if i restart the servers .
The message gets read by the JMS Adapter , BPEL instace gets created but it wont proceed futher and remains in the runnign state for ever.
If i redeploy the Composite then messages get processed but the issue creeps up again ( i tried to checl the logs but ino cluea about the issue .
Getting frustrated day by day tried the bpel.config.transaction, increased the JMS Adapter threads , inreased the worker threads but all in vein..
please let me know if any one has faced similar issue .
Anticipating a quick response from the gurus.
Lakshmi.

We are also facing this issue in 11.1.1.5.
Breifly the issue is : The BPEL process which polls an inbound JMSAdater ( consume_message) either stays in running state forever ( whatever we do) or go to the recovery queue. It doesnt recover even if i try to recover it. This happens intermittently. Redeploying the application / restarting servers sometime solve the issue but as know we cant do that on prod systems .
Can some one look into this on priority and help us giving a solution/workaround.

Correlation issue in JMS adapter - SYNC/ASYNC scenario without BPM

Hi,
I am working on a SYNC/ASYNC scenario with JMS adapter without using BPM. My scenario is SOAP<>PI>JMS. I configured the interface as below:
1. SOAP Sender channel
2. JMS Receiver Channel writing to Queue A.
     Module used:      a. RequestOneWayBean
               b. WaitResponseBean
     Correlation Settings:
               a. Set JMS Correlation ID to "XI Message ID"
               b. Store JMS CorrelationID of request (Checked)
               c. Set JMS Property to "JMS Correlation Id"
               d. Value = "XI MEssage ID"
3. JMS Sender channel reading from queue B ( I am exporting the message from queue A and importing into queue B)
     Module used:      a. NotifyResponseBean
     Correlation Settings:
               a. Set XI MEssage Id to "GUID"
               b. Set XI Conversation ID to "Stored JMS COrrelationID of Request"
I can see the cid in the message from queue A. But I observed thhat the header format of the message in Queue A is "MQSTR".
ISSUE:
1. While writing the message to queue A, below adapter log details(part b) concerned me:
     a. Message '8747a7c2-2b06-11df-8055-005056a70ed6' successfully processed by channel
     b. Could not create acknowledgements for message '8747a7c2-2b06-11df-8055-005056a70ed6'
I am not sure why I am receiving the message that " could not create acknowledgements"
2. While reading the message from the sender channel,I consistently get the error message as below:
     a. XI message ID corresponding to JMS message with ID 'ID:414d51205341504449442e514d202020c67b954b20005602'
          will be created as a new GUID with value '21bca916-424f-41f6-3347-c71090392b58'
     b. Error while processing message '21bca916-424f-41f6-3347-c71090392b58'; detailed error description:
          com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: found no correlation ID: RecoverableException:
          found no correlation ID at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java:105) ...
Below are the blogs which I have already gone through:
1. JMS Synchronous Scenario without BPM - Correlation Settings and Transactional JMS Session
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b028f6f6-7da5-2a10-19bd-cf322cf5ae7b
2. Note: 1086303
3. Sync / Async Bridge without BPM
In the note, they mentioned something about header being "MQRFH2". BUt in our case, the header is "MSSTR". Not sure whether it makes any difference.
Please help.
Edited by: GP on Mar 9, 2010 4:24 AM

Hi,
detailed error description:
com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: found no correlation ID: RecoverableException:
found no correlation ID at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java:105) ...
This error would generally arose when there are multiple messages, got stuck in the outbound queue. Try to stop both the sender and receiver JMS comunication channels and clear both the inbound and outbound queues.
Once all the messages in the queue are cleraed, try posting the message again.
Regards,
Swetha.

Reconnect issue with JMS sender Communicatio channel

Hi All,
We need help for JMS sender channel.from last two days we are getting issue with JMS channels.they are looking green but not picking data from Mq ssue to this lot of messages got stuck in MQ queue and its stop writting messsages .
Problem from PI side is JMS communication channels are not showing any issue.even they do not pick data or lost connection with MQ server they are looking green. so its very difficult for PI team to find out correct Comunication channels which stop picking up the data.when we start/stop that CC its start picking data.
Do anybody face this issue.please do let us know permenent solution instead of doing start/stop when user report issue.
Thanks in advance
Best Regards
Monica Bhosale
Edited by: monica bhosale on Mar 8, 2012 8:56 AM

we are using PI 7.11 and this issue was fixed in SP06
until then one of the work around we were using was to schedule the adapter to stop and start every 3 hour or so

Issue with Apps adapter for Create_Cust_Account API

Hi ,
I need to invoke this package from apps adapter in BPEL(10.1.3.5).
Create Customer: HZ_CUST_ACCOUNT_V2PUB. create_cust_account. This is a Over loaded procedure. Look for the Procedure with these Parameters.
PROCEDURE create_cust_account (
p_init_msg_list IN VARCHAR2:= FND_API.G_FALSE,
p_cust_account_rec IN CUST_ACCOUNT_REC_TYPE,
p_organization_rec IN HZ_PARTY_V2PUB.ORGANIZATION_REC_TY
PE,
p_customer_profile_rec IN HZ_CUSTOMER_PROFILE_V2PUB.CUSTOMER
PROFILEREC_TYPE,
p_create_profile_amt IN VARCHAR2:= FND_API.G_TRUE,
x_cust_account_id OUT NUMBER,
x_account_number OUT VARCHAR2,
x_party_id OUT NUMBER,
x_party_number OUT VARCHAR2,
x_profile_id OUT NUMBER,
x_return_status OUT VARCHAR2,
x_msg_count OUT NUMBER,
x_msg_data OUT VARCHAR2
But I’m getting the following error,
An error occurred while running Jpublisher.missing method
· I’ve tried with Database adapter. But in the runtime I’m not able to pass oracle apps initialization parameter in spite of using transaction and idempotent property in partnerlink.
· Then I’ve tried to invoke fnd_global.apps_initialize first then call the package from database adapter, but it fails again, apparently its not able to execute both DBadapter in same database session although they are in same BPEL transaction.
When I’m passing the initialization parameters in adapter created wrapper procedure then its working fine and customer got created.
Please let me know where I’m going wrong or issue with apps adapter.
It’s urgent …
Thanks in Advance,
Shreekanta

Thanks for the reply.
I'm able to execute the BPEL flows using DB adapter in same session and customer got created.
But I'm wondering why I cant invoke the API using Apps adapter though its standard one.
wsdl file is not getting generated as the adapter wizard not get completed.
Do u have any idea why its giving ' error occurred while running Jpublisher.missing method' error?should I conclude that apps adapter does not support overloaded procedure.

Issue with DB Adapter involving multiple tables

Hi,
Am facing an issue with DB Adapter with multiple tables. Here are the details.
I have 4 tables. Header, Details,Products and Devices. The relationship is defined as follows:
Header has 1:M relationship with Details.
Details has 1:M relationship with Products.
Products has 1:M relationship with Devices.
I want to select the details from all the tables for a particular header_id and detail_id. Defined 2 parameters and query is created with parameters.
SELECT DISTINCT t0.FILE_NAME, t0.UNIQUE_SEQUENCE_NUMBER, t0.HEADER_COUNT, t0.TOTAL_DEVICE_COUNT, t0.FILE_DATE, t0.FILE_SEQ_NUMBER, t0.DEVICE_COUNT, t0.PHONE_TYPE, t0.PHONE_OWNERSHIP, t0.TRANSACTION_TYPE, t0.PURCHASE_ORDER_NUMBER, t0.CUSTOMER_ID, t0.CUSTOMER_DEST_SUFFIX, t0.LOCATION_DESTINATION, t0.MASTER_FACTORY_ORDER, t0.MASTER_FACTORY_ORDER_LINE_NUM, t0.ENT_ORDER_NUMBER, t0.DELIVERY_IDENTIFICATION_NUM, t0.UEDF_REVISION_NUM, t0.STATUS, t0.INBOUND_BPEL_INSTANCE_ID, t0.ERROR_DESCRIPTION, t0.INBOUND_FILE_VERSION, t0.CREATED_BY, t0.CREATION_DATE, t0.UPDATED_BY, t0.UPDATE_DATE FROM EDF_HEADER_STG_INT t0, EDF_DETAILS_STG_INT t1 WHERE (((t0.FILE_NAME = #file_name) AND (t1.EDF_SERIAL_TYPE = #prod_type)) AND (t1.UNIQUE_SEQUENCE_NUMBER = t0.UNIQUE_SEQUENCE_NUMBER))
I expect the DB Adapter to retrieve the records for the parameters passed. i.e only those records from details table which matches with the parameter I passes in (t1.EDF_SERIAL_TYPE = #prod_type) . But I see that the DB Adapter retrieves all records from the details table for a particular unique_sequence_number(unique_sequence_number is primary key for headers table and foreign key for details table). Could you pls tell me how can I retrieve only selected records from the details table?
Regards,
Meenu

Yes. When I run this query in DB, I get one record . While defining DB Adapter, I have imported 4 tables and also defined the relationship between the tables. In my case, column unique sequence number is primary key of headers table and foreign key of details table.The above select query is generated by the DB Adapter for the parameters I have passed in.
My data is as follows:
Headers table:
file_name uniq_seq_num
file_1.xml 220
Details table
product_id unique seq num edf_prod_type
111 220 A
112 220 B
113 220
Now, I call DB Adapter with parameters 'file_1.xml' (file_name)and 'A'(prod_type). I expect the DB adapter to retrieve only one record with product_id 111 in the detailscollection. But I see that the adapter retrieves all records from the details table without considering the value of prod_type.
Edited by: user13276819 on Mar 19, 2012 6:32 AM

Issues with JMS Server migration

Hi All,
I have issue with JMS server migration.
I have configured clustred environment with 2 Managed server (MS1 & MS2) and with one JMS Server which is running on MS1 and configured for auto migration, when I start both my managed server once and access the application very functionality works fine and when I stop the MS1 the JMS server successfully geting migrated to MS2 and in this scenarion also my application works as expected and when I restart the MS1 and access the application all the functionalities related to MDBs are executed twice.
However once we restart the MS1 we observe that in the monitor tab of MDB the connection status for both managed servers it show as connected.
As a result there is a redundancy when the MDB is executed
I am using Weblogic Server 10.3.0 & normal topics in the MDBs.
Please let me know is this a bug or am I missing any configuration.

Hi Suresh,
There is a "Bug-10007947" in WLS 10.3.0 version which dose not displays the values properly on admin-console once the migration has taken place, however I am assuming that bug may fix your issue so try that out in your test environment. If that dose not work try out the below suggestions.
Suggestion:
- Try the same test on different versions of WLS lower as well as on higher versions compared to WLS 10.3.0 (i.e WLS 9.2.X and WLS 10.3.x) and check what are the result.
- If in any other version your test runes properly, then you can create a simple test case and open a service request with Oracle asking for creating a BUG and let them do their job.
Hope above information helped you.
Regards,
Ravish Mody

Error with JMS adapter

We are using a JMS adapter with XML input files and we are getting the following error:
:#1.#00144F80C55600310000001A00001BC700DD9B18A4E85181#1288983973313#com.sap.engine.messaging.impl.core.queue.consumer.SendConsumer##com.sap.engine.messaging.impl.core.queue.consumer.SendConsumer.handleRetriesOnException(MessagingException, QueueMessage, MessageController)#J2EE_GUEST#223963##<applicationserver_hostname>_<SID>_623765##8bfba530dea111dfbf9b00144f80c556#MS Queue Worker [JMS_http://sap.com/xi/XI/SystemSend]##0#0#Error##Java###Transmitting the message to endpoint using connection failed, due to: .#3#JMS_http://sap.com/xi/XI/System#com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.io.IOException: Error writing to server#http://<hostname>:50000/sap/xi/engine?type=entry#
One that is interesting is that these errors are occurring on application servers only. Could it be that the Integration Server URL is not fully qualified. In the SLD it's just <hostname>, not <hostname>.test.com (as an example).
Any help is greatly appreciated.

Dear George,
Concerning the issue, in the Integration Engine please try increasing the value of the parameter :
   - icm/HTTP/max_request_size_KB
from the default size of 100MB to e.g., 2GB.
Kindly go through the following link :
- http://help.sap.com/saphelp_nwpi71/helpdata/en/58/108b02102344069e4a31758bc2c810/frameset.htm
for details.
Additionally, it is recommended to setup a large message queue,
i.e.,
add an entry and appropriate value (e.g., 20480 KB) for the TUNING parameter : 'EO_MSG_SIZE_LIMIT'
using
TCODE
   sxmb_adm
    Integration Engine Configuration
      Select Edit mode and Add the TUNING parameter
I Hope this helps.
Best Regards
Nishwanth

Satellite P300-1AN - Touchpad issue with AC adapter

I've a Satellite P300-1AN notebook and since the beginning (two weeks)
I have a touchpad issue: it is not immediately responsive and the pointer trembles when touching the pad. Very often it freezes for just one or two seconds.
This is VERY annoying. A USB mouse works perfectly.
I tried reinstalling ALPS drivers, tried Synaptics ones, tried just Windows Vista drivers: no way.
Now I have found the reason: this issue is present only when the notebook is powered by AC adapter.
With battery the touchpad is perfect.
I contacted Toshiba Service and thay said that they won't change the AC adapter if I don't try before a complete system restore!
Isn't it simpler just try with a new adapter and only then, if the problem persists, try more drastic procedures?
Has anyone had this same issue?

> I contacted Toshiba Service and thay said that they won't change the AC adapter if I don't try before a complete system restore! Isn't it simpler just try with a new adapter and only then, if the problem persists, try more drastic procedures?
The point is that your notebook should be always checked using the Toshiba factory configuration.
Why? Because the ASP wants to be sure that this issue is not related to a software problem (compatibility issue with 3rd party applications). The software issues are not covered by warranty.
Furthermore the ASP will always recover the notebook before checking any hardware parts for a malfunction. Therefore you should always backup your data from the HDD before you will send the notebook for checking.
I would recommend to reinstall the OS using the Toshiba recover disk and then check if the issue would appears.
If yes then you can contact the ASP again and could provide all details which are necessary for an technician.
Bye

XI 3.0: Preserve trailer spaces with JMS Adapter

Hi everybody
Does anybody knows how it is possible to preserve the trailing spaces in a message coming from JMS adapter?
I have a fixed-length field that is filled with a left space trailer, but the space is removed by (i think) the adapter.
Does exists something similar to "whitespace=preserve" for the datatypes???
Thanks in advance.

If somebody is interested, just add the
xml.<structname>.fieldContentFormatting = nothing to the module configuration params.
I derived this one from the configuration guide of the File Adapter

Issue with JMS sender Communication Channel

Hi All,
We are tying to connect to IBM WebSphere MQ system from SAP PI and pickup messages thru sender JMS adapter.
This is WebSphere MQ -> PI -> Proxy Async scenario. We deployed the required sda file in SDM. We could connect to MQ system message queue, and pick messages from PI development system.
But, when we are trying to do it from PI test system, we get the following error in Comm Channel monitoring:
Error while processing message 'b000f150-15cf-4484-24ec-d8ad10acb685'; detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Exception in method process.: BaseEJBException: Exception in method process. at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java:105) ...
The patch levels (ABAP & Java) are the same for both the PI systems.
sda file is also deployed successfully for both systems. Comm Channel config is exactly the same for both the systems.
But, still we get the above error.
We did full cache refresh, CPA cache refresh, stopped/started comm channel, restarted the adapter, java stack, and whole PI system after deployment. But, still we get the same error.
Can you please tell me if i am missing something here?
Thanks,
Chandra

Hi,
>>>MessageFilterException
my exp with this error on JMS
a) delete the channel in ID
b) recreate it and active and it works ....
at least with activemq jms
Regards,
Michal Krawczyk

Issue with minidisplay adapter and wifi

I'm not sure if anyone else is having this issue, but my gf is having an issue when she connects her 13" macbook pro to her monitor via the minidisplay dvi adapter. When she connects it her wifi disconnects and has no internet access at all, but when she disconnects it the internet comes right back on. She's using a generic adapter but what would that have to with the wifi? She uses a linksys G router and is using 10.6.1

This thread caught my attention - because since switching last week from a late '06 Macbook to the Macbook Pro 13", my Wifi performance at home has gotten slow and unreliable.
I'm using the Apple MiniDP-DVI adapter, connected to a 24" Dell monitor, which has worked great for a few years on my white Macbook. My base station is a Linksys WRTSL54GS, located about 20 feet away from my desk.
So, I tried some speed tests with and without the DVI. Performance with the adapter connected is terrible, disconnected it's perfect. Further testing shows that positioning matters.
When the adapter is turned back 90 degrees, leading the monitor cable towards the back of my desk, Wifi performance is bad. When I turn the adapter so it sticks straight out the left side of the Macbook Pro, performance is normal.
This is a little weird, but an acceptable workaround for me.

Issue With Apps Adapter JDev 11.1.1.3

Hi ,
We are facing some issue with Oracle Apps Adapter with Jdev 11.1.1.3. The wrappers for PLSql APIs were not properly generated.
If anyone having such issue/solution pls share the same.
Thanks In Adv
Venkata Madhu

Hi Anuj,
I sent email to ur official id with the issue details. 1 query i have here, Can i generate wrapper using 10g Adapter and consume in OSB 11.1.1.3?.
Also some funny issues we are facing with API's. If the API create/modified, immediately we couldn't able to generte the wrapper if generate also, the response is not in xsd defined format.
But if we re-generate the wrapper after sometime, it work with no issues. Don't why.
Regards
Venkata Madhu

Issues with FTP adapter

Hello,
I m facing issues using the FTP adapter. I am using 10.1.3.1 standalone installed in my desktop.
1) The FTP adapter doesnt poll continuously for the files. It dies off as soon the folder is empty. If there are incoming files after sometime, the BPEL process fails to pick them. I created an empty BPEL process that has a recieve activity from an FTP adapter as partner link
2) The files are fetched and deleted but are never archived, despite setting the archive files. Can we not archive those files in another folder of same FTP server ?
3) Sometimes, the files are deleted, but there is no activity or process shown in the BPEL console.
Can you please help me with these issues
Thanks
Harinath Gandhi

Are you able to upgrade to 10.1.3.3. A lot of issues with adapters are solved in this release.
Marc
http://orasoa.blogspot.com

Esb parallel processing problems with jms adapter and bpel

Hi,
I have esb project which dequeues from a jms adapter and then the esb router calls a bpel process. This bpel process takes about 10 seconds. The first step this bpel does is to return true ( to the client) to the esb router so the ESB thinks he is ready. This does not work.
Now if I use in the esb router asyn routing rule to the bpel ws then the esb dequeus all the messages from the queue. All the esb entries are green. But the esb starts one for one the bpel process and then updates the esb entry with a new start time ( very strange) .
If I use a sync routing rule then it dequeues and call the bpel process one for one.
How I can parallel proces the jms messages ,because I have 2 quad cores cpu's . Async routing rules looks like the solution.
How can the esb detects the bpel is still running even with the first action in bpel is to return true. I expected when the esb retrieves true from the bpel ws it ends the current esb entry and goes on with the next. So the total esb time takes a few seconds and not so long as the last the bpel proces finishes.
And why is he updating the starting time.
Thanks Edwin
Message was edited by:
biemond

I have esb project which dequeues from a jms adapter
and then the esb router calls a bpel process. This
bpel process takes about 10 seconds. The first step
this bpel does is to return true ( to the client) to
the esb router so the ESB thinks he is ready. This
does not work. I am not sure if it can ever work, if you reply and then still proceed with your BPEL process.
Here is something I would like to suggest:
Can you try ESB -- (sync) --> BPEL, where BPEL process itself is Async. In that case, esb will consume all the messages very fast and BPEL will get that message and put in Delivery Queue and reply back to ESB. Now BPEL will process them simultaniously based Receiver/Worker threads defined in your env.
HTH,
Chintan

Issue with JMS adapter

Similar Messages

Maybe you are looking for