Issue with setting deletion indicator in PR

Hi ,
For a certain sales order, a dummy Purchase Requisition was created and the delivery was also created.
There was an existing logic in exit MV50AFZ1 to set the deletion indicator in PR when PGI has been done.
But when the Goods Issue was done by another user id , Purchase Requistion does not have the delivery indicator set ,as this user ID has no authorization to ME52N.
Users want to surpass this check for all users who have authorization for Goods Issue , i.e, when any user who has authorization for Goods Issue does the PGI, then the deletion indicator should be set in PR, irrespective of whether he has/has no authorization for ME52N.
How can I achieve this?
Is there any place where I can check the authorization for ME52N and then use some other id for PGI so that deletion indicator is automatically set?
Awaiting response.
Thanks,
Neethu

Thanks Chericheri
So my code now reads MODIFY <internal table> FROM <work area> INDEX <table control>-current_line transporting <deletion indicator field>.
Edited by: Brett Cunliffe on Sep 22, 2011 4:44 PM

Similar Messages

Set deletion indicator in purchase requisition account assignment

Hi Guys,
Can you please help we with the solution to set deletion indicator in purchase requisition account assignment or close purchase requisition. A purchase requisition of $3.600.000,00 was created through Project system Network-External Processing and it has 2 duplicate network activities and $2.246.577,20 was converted to purchase order then $1,353,423 became the network remaining order plan. A purchase order service entry sheet was accepted and the invoice was created. Now Iu2019m experiencing problem when Iu2019m trying to change WBS element and Network system status to TECO in order to remove the remaining order plan of $1,353,423. Iu2019m getting error message number:06411 the procedure I have follow to correct the error is to reduce quantities in the account assignment item and delete superfluous account assignment by setting deletion in each case but I cannot do that because the fields are grey
Regards
Sandile

Hi,
please check first if the report ZMO_CORRECT_EBKN from note 739004 can correct the problem.
I would like to recommend you to check also the note 796973 whether the correction is avalilable in your coding, it should solve the issue.
In case the problem still persists, please open a ticket to get help from the primary support in area MM-SRV.
Regards,
Edit

I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. What can I do?

I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Issue with Setting Application Item

Hi All,
I have an issue with setting the value of application item G_USER_ID as part of the login process.
I use customized authentication for login. I have created an application item G_USER_ID, and in my CUSTOM_AUTH procedure, I am setting its value as APEX_UTIL.SET_SESSION_STATE('G_USER_ID', l_user_id);
For some reason, the value is not set to G_USER_ID the first time I login. When I log out and login again without closing the browser, the value is set. Note that I even tested with a static value instead of l_user_id like APEX_UTIL.SET_SESSION_STATE('G_USER_ID', '5555555'); but still fails to set during the first login.
I hope someone can guide me as to what I am doing wrong here.
Thanks!
JMcG

What does this do?
:SVR_FLAG := NVL(l_mult_svr,'N');
Scott

How to set deletion indicator to SERVICE ENTRY SHEET

Dear Experts,
Please explain, is it mandatory to set Deletion indicator to Service entry sheet before Start of Archiving Service entry sheet.
Also explain Procedural steps to set deletion indicator to service entry sheet.
Thanks in Advance

Dear,
First of all Revoke Acceptacne as
Entry Sheet --> Set Status --> Revoke Acceptance .
After that you can delete....but no Invoice must be exist.

Issue with setting ratings and labels

Greetings all. I am having an issue with setting ratings AND labels on image files at the same time. If the script sets the label first then the rating, the label doesn't show in Bridge. If the script sets the rating first then the label, the rating doesn't show in Bridge.
Is there a workaround for this? Here is my script function for doing this. file=filename minus extension. Rating is a number for the desired rating. lab is a number for the level of Label I wish to set. Everything works great except that I can't set both Rating and Label with the script as shown. In this instance, only the Ratings will show up in Bridge after running the script. If I move the x.label=Label line under the x.rating=Rating line, then the ratings only show for those images with no label (lab=0). Any image that gets a label receives no rating.
If you're going to test this, you may want to comment out the Collections part. That's the part within the "switch(Number(Rating))" block.
function setRating(file,Rating,lab) {
    try{
        cr=File(file+"CR2");
        psd=File(file+"psd");
        jpg=File(file+"jpg");
        tif=File(file+"tif");
        switch(lab) {
            case 0: Label = ""; break;
            case 1: Label = "Select"; break;
            case 2: Label = "Second"; break;
            case 3: Label = "Approved"; break;
        if (cr.created) {
            var c=new Thumbnail(cr);
            c.label=Label;
            c.rating=Rating;
            if (psd.created) {
                p=new Thumbnail(psd);
                p.label=Label;
                p.rating=Rating;
                if (jpg.created) {
                    var j=new Thumbnail(jpg);
                    j.label=Label;
                    j.rating=Rating;
                    Rating=0;
                else addFile=psd;
            else addFile=cr;
        switch(Number(Rating)){
            case 0 : break; /* No Rating */
            case 1 : if(!app.isCollectionMember(OneStar,new Thumbnail(addFile))) app.addCollectionMember(OneStar,new Thumbnail(addFile)); break;
            case 2 : if(!app.isCollectionMember(TwoStars,new Thumbnail(addFile))) app.addCollectionMember(TwoStars,new Thumbnail(addFile)); break;
            case 3 : if(!app.isCollectionMember(ThreeStars,new Thumbnail(addFile))) app.addCollectionMember(ThreeStars,new Thumbnail(addFile)); break;
            case 4 : if(!app.isCollectionMember(FourStars,new Thumbnail(addFile))) app.addCollectionMember(FourStars,new Thumbnail(addFile)); break;
            case 5 : if(!app.isCollectionMember(FiveStars,new Thumbnail(addFile))) app.addCollectionMember(FiveStars,new Thumbnail(addFile)); break;
            default : break;
    }catch(e){
          alert(e);
          return -1;

Afew errors to start with, you were not creating a proper file as there wasn't a fullstop in the filename.
If a CR2 file didn't exist no other file was looked for, you were using "created" and should have been "exists"
This now labels and rates....
setRating("/C/Test Area/NEF/z",2,1);
function setRating(file,Rating,lab) {
    try{
        cr=File(file+".CR2");
        psd=File(file+".psd");
        jpg=File(file+".jpg");
        tif=File(file+".tif");
        switch(Number(lab)) {
            case 0: Label = ""; break;
            case 1: Label = "Select"; break;
            case 2: Label = "Second"; break;
            case 3: Label = "Approved"; break;
        if (cr.exists) {
            var c=new Thumbnail(cr);
            c.label=Label;
            c.rating=Rating;
            if (psd.exists) {
                p=new Thumbnail(psd);
                p.label=Label;
                p.rating=Rating;
                if (jpg.exists) {
                    var j=new Thumbnail(jpg);
                    j.label=Label;
                    j.rating=Rating;
                    Rating=0;
        switch(Number(Rating)){
            case 0 : break;
            case 1 : if(!app.isCollectionMember(OneStar,new Thumbnail(addFile))) app.addCollectionMember(OneStar,new Thumbnail(addFile)); break;
            case 2 : if(!app.isCollectionMember(TwoStars,new Thumbnail(addFile))) app.addCollectionMember(TwoStars,new Thumbnail(addFile)); break;
            case 3 : if(!app.isCollectionMember(ThreeStars,new Thumbnail(addFile))) app.addCollectionMember(ThreeStars,new Thumbnail(addFile)); break;
            case 4 : if(!app.isCollectionMember(FourStars,new Thumbnail(addFile))) app.addCollectionMember(FourStars,new Thumbnail(addFile)); break;
            case 5 : if(!app.isCollectionMember(FiveStars,new Thumbnail(addFile))) app.addCollectionMember(FiveStars,new Thumbnail(addFile)); break;
            default : break;
    }catch(e){
          alert(e);
          return -1;

Setting deletion indicator/Flag for an operation in production order

Dear All, Hi
How to set deletion indicator/flag for an operation in a production order. I don't want to delete the operation as such. Please help & suggest.
Ragards,
Shaiz

Hi Shaiz,
I hope the requirement is just like you posted earlier as in case of component deletion.
Here in this case also the behaviour of the order remains the same.
So you can go for release the order as soon as the order gets created, your both the requirements can be fullfilled.
Also you havn't provided the exact feedback on the solutions offered by all of us, on your last query.
Request you to give detailed input on the same.
Hope thish helps you.
SmanS

Issue with setting Planning Data Source

I keep getting error when I try to set up the data source
the Oracle database = orcl
The data base schema EPMAPLAN
Password = EPMAPLAN
when i log on i to Oracle Database
Sys as SYSDBA
Password = Password01
so what what should be the Database Source Name = ORCL Correct ????
Server = win-392h1l307n1 or localhost
Databse = ORCL
User Name = ????????????
Password = ?????????
I try all the combinations
Please advise

Duplicate post - Issue with setting up planning data source
Cheers
John
http://john-goodwin.blogspot.com/

Set deletion indicator on unsuccessful RFQs

Dear Everyone,
Essentially, the criteria for marking the deletion indicator in unsuccessful RFQs are:
1/ quotations are not maintained for these RFQs; net price is zero.
2/ deadline for the submission of the quotation had expired. The fields EKPO-MAHN1, EKPO-MAHN2 & EKPO-MAHN3 are also verified to see if reminders are required to be sent after the quotation deadline. If required, then the RFQs are not appropriate candidates for now.
3/ if the above criteria is met, a further verification check is made amongst the RFQs with the same collective number to see if any of the RFQs are having quotations maintained, that is, the net price is not zero. One of the quotations (having the same collective number and accepted by the business) will have a quotation comment of AB1 or AB2 and this will be used as a basis for rejecting (updating the rejection indicator) the rest.
4/ a report program is preferred. It should have key selection criteria like Quotation deadline [select-options], RFQ # [selection-options], quotation deadline [parameter], collective number [parameter * wildcard acceptable],
Could anybody please provide solution for this will be appreciated?
Thanks in advance
Ravi

Dear,
The system sets this status when you release the order, provided that the Order record required indicator is set in the order type-dependent parameters (see Customizing for Process Order)....
This setting is there in SPRO....
Production Planning for Process Industries - Process Order-Master Data-Order-Define Order type Dependent parameters...
In this you set the option Order record Required....
Requirements are that the process orders are settled, associated PI sheets, inspection lots and any linked purchase orders are complete.
Following are prerequisites for closing a process order
1 The order must have the status Released (REL) or Technically completed (TECO)
2 The order balance must be 0
3 There can be no open purchase requisitions, purchase orders.
4 There can be no future change records from confirmation processes.
.Now Calculate Overheads using Tcode : KGI2 - Individual Processing
CO43 - Collective Processing
Step to be follow,
1.Calculate WIP using Tcode : KKAX - Individual Processing
KKAO - Collective Processing
2.Calculate Variance by using Tcode : KKS2 - Individual Processing
KKS1 - Collective Processing
3.Finally do the settlement of Order in Tcode : KO88 - Individual Processing
CO88 - Collective Processing
Please refer this thread also,
https://forums.sdn.sap.com/click.jspa?searchID=17422319&messageID=5934846
The transaction COA5 (Archive Administration Preprocessing).
This will allow you to set the deletion flag
Hope this helps.
Regards,
R.Brahmankar

Tcode KKF6N Setting Deletion Indicator

Hi ,
When we try to set the deletion indicator for a material in Tcode KKF6N we get an error : "The balance on object ORDER NO.... is not zero.That is there is still costs on the object."
I have tried variance calculation but returns saying no variances.
Any suggestions ?
Thanks
Kartik

Also check your settlement profile.
In our discrete orders, the settlement profile is set to "must be setttled" meaning the balance MUST be zero. On some order that are simply "wrong" or very old and we don't want the numbers from previos FY to settle in current year, we change the indicator to "CAN BE settled" set the DLFL and thne change the indicator back.
Some issue are just too old or too wrong to fight through the correction - a journal entry is written to correct the GL and the order is set to DLFL
Hope this is helpful.
Althea

Issues with setting "Album Artist" in iTunes 9.2.5.1 on Windows 7

I googled this for a while but haven't been able to find this issues mentioned anywhere else yet. Here's what's happening: I am importing CDs to iTunes 9.2.1.5 on Windows 7 Pro (64 Bit) using MP3 Encoder > Higher Quality. All is well except for a few CDs where I'd like to set an overall Album Artist. Example: Tony Bennett's Duets: An American Classic. When importing the CD it shows up under "Various Artists" since "Artist" is always Tony Bennett plus whoever he sings with. To make sure the album shows up under Tony Bennett in the library I click on the album and set "Album Artist" to Tony Bennett. That, however results in changing the "Artist" field as well now so all fields say Tony Bennett, which shouldn't happen, "artists" should stay unchanged. I tried this with several albums and the behavior is always the same.
I also tried the back door by going into the actual folder of the album in Windows then change the MP3 details and populate "Album Artist" there for all tracks within the album. Once I re=open iTunes it registers the change only for the first track but not the rest. So I re-import the folder into iTunes and then it does take "Album Artist" and also leaves "Artist" unchanged but for some reason has now lots of numbers under "Comments". There seems to be a mismatch of the field attributes between iTunes and Windows for MP3 files (possibly other formats as well). Wondering if anyone else has observed this or if I am just missing some setting.

FYI iTunes handling of ID3v2.4 tags seems to have some issues as well... Translating genres into their numeric codes for one thing. I'd recommend sticking with v2.3.
I'm not exactly sure from your posts what you were seeing. Was the artist being changed in Get Info. after you'd set Album Artist, or was it changing elsewhere on screeen? iTunes 9(.1 I think) added an option *View > Column Browser > Use Album Artists*. Unfortunately this doesn't change the heading of the column so that you "see" it is now only listing album artists but that's what it does.
There is also an occasional issue with the current build in that sometimes changes to Album Artist or Sort Album Artist fail to be reflected properly in the column browser until iTunes is closed and reopened.
tt2

Issue with the presence indicator in list/library web part.

When viewing a user field (Created By, Modified By or a custom People column) through the list web part (either through the default page /Forms/AllItems.aspx or a custom web part page using a list/library) the presence indicator always says presence unknown.
However if I go to the Site Permissions on the same site, or My Site or a custom page using a modified core search results web part I wrote the presence indicator works fine. I can't find any errors being reported on the server.
Looking at the rendered code the list web part generates:
<IMG name=imnmark width=12 height=12 title="" class=ms-imnImg id=imn_48683,type=smtp alt="No presence information" src="/_layouts/images/blank.gif" border=0 sip="[email protected]">
Locations where the presence indicator works the code is:
<IMG name=imnmark width=12 height=12 title="" class=ms-imnImg id=imn{20140822-1752-098D-8C11-188AD0B8B8B6},type=sip alt=Available src="http://portal.mydomain.com/_layouts/images/imnon.png" border=0 sip="[email protected]" valign="middle">
It appears that the List web part is not detecting that the users have a sip address and they appear to be rendered using smtp instead. It's also odd that the list web part is pulling the correct sip address while the one that works is pulling the
email address, not the sip address stored in the user profile. I spent considerable time going through the xslt to try and figure how the tag is rendered but I haven't been able to figure it out.
We are using Cisco Jabber 9.2.3 for IM, I don't know if that should make a difference or not. It's working fine in other parts of SharePoint and in Outlook. Running SharePoint Dec 2011 CU (14.0.6114.5000) with MS Office 2010 SP2 installed on the client. Tested
in IE 9.0/10/11.
Any ideas?

We don't have a Lync server and I don't have the software available. Are you saying just having Lync installed even though it won't work might help?
I did some more digging and believe that this is an issue with the XsltListViewWebPart. If I go to the UserInformationList the web part used to render the list is the ListViewWebPart and the presence indicator works there. Also our environment
was migrated from 2007 and there are a number of pages that are using the old ListViewWebPart and the presence indicator works fine in this part. If edit the page and add the same list library to it, it's added as a XsltListViewWebPart and the presence
indicator does not work.
The presence control is not rendered by the xsl files used by the webpart. I modified the xsl to display the raw xml and the html code for the presence is part of the xml. I'm guessing this can't be changed and is part of how SharePoint is rendering
the data for the XsltListViewWebPart. You can see the Editor and CheckoutUser lines have the html code embedded in the data.
<Row
ID="60"
PermMask="0x7fffffffffffffff"
HTML_x0020_File_x0020_Type=""
File_x0020_Type="xlsx"
HTML_x0020_File_x0020_Type.File_x0020_Type.mapall="icxlsx.png|Microsoft Excel|SharePoint.OpenDocuments"
HTML_x0020_File_x0020_Type.File_x0020_Type.mapcon="SharePoint.OpenDocuments"
HTML_x0020_File_x0020_Type.File_x0020_Type.mapico="icxlsx.png"
serverurl.progid="1http://myparkersdev.domain.com/sites/BPIT/_layouts/xlviewer.aspx?id=/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx"
ile_x0020_Type.progid="SharePoint.OpenDocuments.3"
File_x0020_Type.url="FALSE"
FSObjType="0"
FileRef="/sites/BPIT/Shared Documents/Database Sizes.xlsx"
FileRef.urlencode="%2Fsites%2FBPIT%2FShared%20Documents%2FDatabase%20Sizes%2Exlsx"
FileRef.urlencodeasurl="/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx"
FileLeafRef="Database Sizes.xlsx"
FileLeafRef.Name="Database Sizes"
FileLeafRef.Suffix="xlsx"
CheckoutUser="<a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'><img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_77,type=smtp'/></a><a onclick="GoToLink(this);return false;" href="/sites/BPIT/_layouts/userdisp.aspx?ID=526">Ian Howe</a>"
CheckoutUser.id="526"
CheckoutUser.title="Ian Howe"
CheckoutUser.span="<a onclick="GoToLink(this);return false;" href="/sites/BPIT/_layouts/userdisp.aspx?ID=526">Ian Howe</a><img border="0" height="1" width="3" src="/_layouts/images/blank.gif"/><a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'><img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_78,type=smtp'/></a>"
CheckedOutUserId="526"
IsCheckedoutToLocal="0"
Created_x0020_Date="0;#2014-08-22 09:47:01"
Created_x0020_Date.ifnew=""
ContentTypeId="0x0101000AE0EC76CD0DB743B42D2FE022EAA6DC"
Modified="8/22/2014 10:51 AM"
Editor="<a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'><img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_79,type=smtp'/></a><a onclick="GoToLink(this);return false;" href="/sites/BPIT/_layouts/userdisp.aspx?ID=526">Ian Howe</a>"
Editor.id="526"
Editor.title="Ian Howe"
Editor.span="<a onclick="GoToLink(this);return false;" href="/sites/BPIT/_layouts/userdisp.aspx?ID=526">Ian Howe</a><img border="0" height="1" width="3" src="/_layouts/images/blank.gif"/><a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'><img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_80,type=smtp'/></a>"
ecb.dispex="return DispEx(this,event,'TRUE','FALSE','FALSE','SharePoint.OpenDocuments.3','0','SharePoint.OpenDocuments','','1http://myparkersdev.domain.com/sites/BPIT/_layouts/xlviewer.aspx?id=/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx','526','526','1','0','0x7fffffffffffffff','','')" />
I just find it strange that the old ListViewWebPart works. Our SP environment has not been patched to the latest version, I'll try that next and see if it makes a difference.

Error in setting deletion indicator to PR's

Hello all,
As i was trying to set the Deletion indicator for the selected PR , the error msg was displayed saying * "This item only changeable via the associated production order" *
How to proceed further??????
please let me know the TCode of Prod Order and the Steps to be followed
Regards,
Preeti.P.G

you need to select relkated order type...
if you are getting networks then that means you have selected network type... over there...
selct respective production order type...
or tell me what is account assignment catagory in PR check account assignment tab tell me what is account assignment over there.. network , order, WBSE.....
Venkatesh

Issues with setting up Exchange Server 2013

Hi All
Not sure what im doing wrong yet i am having issues with exchange server 2013.
Currently I have got general SMTP Mail flow working. as long as i log onto the local servers OWA (https://10.x.x.x/owa) i can log into a users mailbox. i have tested sending and recieving mail using this and it works.
My main issue now is with accessing the OWA externally via our website. (owa.xx.xx.au/owa) or connecting ANY Outlook to the server.
When i connect to the exchange server via outlook it asks for the password again multiple times never authenticating it then time's out and says:
" the action cannot be completed. the connection to microsoft exchange is unavailable, outlook must be online or
connected to complete this action "
then when i click on OK it goes to the General Tab and under microsoft exchange server: the name for it appears as
[email protected]
with mailbox set as:
=SMTP:[email protected]
Currantly on our DNS i have
mx= 10 mail.xx.xx.au
CNAME= autodiscover = mail.xx.xx.au
CNAME= OWA = mail.xx.xx.au
A = mail = 12.34.56.78
On our modem/router i have set one-to-one nat to our firewall IP
On our firewall i have
SMTP SAT and NAT to Exchange server
HTTPS Sat and NAT to exchange Server
HTTP Sat and Nat to exchange Server
Port 587 SAT and Nat to exchange server
pop SAT and NAt to exchange server
Im willing to bet its something stupid i have overlooked but i was wondering if anyone would be able to help me out
Regards
Sibsy

Hello,
Firstly, please follow the Shadab's suggestion to check related virtual directory settings.
Please make sure you use certificate that's created by a CA that's trusted by the client computer's operating system.
Please use get-outlookanywhere | fl cmdlet to check ExternalClientAuthenticationMethod. By default, the authentication is Negotiate.
Cara Chen
TechNet Community Support

N82: issue with sett. wizard

Hi All,
I'm using a black N82 with the latest FW (V20.0.062) and whenever I try to open the Sett. wizard the phone is freezing (only the wallpaper is displayed). Only a restart (by removing the battery) recovers the phone. I tried also a reset to the factory settings but the problem remains...
Anyone knows a solution to this problem?

Thanks again for your prompt response.
I've never installed additional applications on my phone.
The following 'items' have gone 'into' the phone since purchase:
1. Mp3 songs.
2. Contacts via the sim directory.
3. a Powerpoint presentation via data transfer mode (nearly a month ago, but my issues with the phone surfaced a week ago....so no problem with the ppt i guess)
4. camera pics, MS outlook calender, to-do and Text messages routinely syncd between my phone and laptop.
5. Bluetooth transfer out of my phone to another phone for a transfer of pics taken.
Again many weeks ago not followed by adverse effects...
Thanks, it'll take me a while to understand SYNCML. Ill read and try to understand soon.
But then wont PC suite take care of contacts backup n restore,etc?
If so, where can i find the contacts stored in my computer and in what format?
For instance, the photos and text msgs - synced - are stored in Lifeblog folder under my documents folder and can be easily accessed via the LifeBlo application both on the phone and the computer/laptop.
PS: I also managed to update the software today, with the help of Nokia Software updater app on my laptop.
Keeping this all in mind:
I reckon, the m-card and perhaps phone memory are affected. Maybe the camera application as well.
If this is proved, i think, then i m-card format and hard reset is the way forward.
Thanks again.

Issue with setting deletion indicator in PR

Similar Messages

Maybe you are looking for