Issue with : Stateful BSP Applications: New State Management Option

Reference:weblog by Thomas Jung - /people/thomas.jung3/blog/2004/11/09/updated-stateful-bsp-applications-new-state-management-option
I see a comment by one user to send the complete code... I am not sure what else can be sent - try it out rather than getting spoon-fed. - getting offline - sorry...
I had two issues with this ITSM way of session handling.
First - if you are using an SP42 environment, check CL_BSP_RUNTIME=>ON_SESSION_CMD() to see if CANCEL is defined as an option. If not make sure that you use &sap-sessioncmd=CLOSE" instead of the &sap-sessioncmd=CANCEL" . If CANCEL is not defined , it will give you shortdumps...
Second - when I closed the window, the session was not terminated. I used onbeforeUnLoad="exitBSPApplication(); instead of onUnLoad="exitBSPApplication(); and it worked fine. Not sure if it has any other issues.
But now I am facing a new issue... all but one application is not ending... I have no clue on why this is happening.. I am still checking..
Thanks Thomas, you are the best, as always...

Thanks for checking the code in your system.
After some investigation, I found the behavior as explained below.
If the actual url has any fields passed as parameters, e.g.. /default.htm?var1=a&var2=2 ...
- if I use CANCEL as the option, a shortdump is created and the session is not closed. if I use CLOSE, Session is terminated and no shortdump happens.
If the actual url does not have any parameters, e.g.. /default.htm ...
- CANCEL does the work, but CLOSE does not exit the session.
In my applications I used request->get_form_fields to see if there are any parameters, and if there are, then I use CLOSE as the option and else, I use CANCEL. So now, the session
management works beautifully...
There is a good chance that I am doing something wrong here too.

Similar Messages

Issues with ODI connection to Hyperion Financial Management

Hi,
I am having some issues with ODI connection to Hyperion Financial Management. ODI and Financial management are setup on different machines.
The ‘Cluster(Data Server)’ name in Topology is given as ‘hfm03cl’. On reverse-engineering a model it gives the following error:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 38, in ?
com.hyperion.odi.common.ODIHAppException: Error occurred in driver while connecting to Financial Management application [HFM1] on [hfm03cl] using user-name [admin].
at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
When HFM is installed on the same machine, it works fine. How does ODI identify a cluster on a different machine? Do I have to give the machine name along with the cluster name? If so, what is the format?
Thanks,
Su

You will need to have the HFM client installed on any machine that will be running ODI (i.e. Designer or Agent) that will be executing connections to an HFM server.
Once you have the HFM client installed, see if you can actually connect to HFM from that machine using the HFM client.
Couple of other thing, in the Physical Schema, have you set the Application Catalog and Work Catalog to the same HFM application?
Also, when you are reversing, are you using the local agent or one you have installed using agentservice?
geeo

Issues with Oracle in a new location.

Hello -
I recently had to change the computer name of a Windows 2003 SP2 test server. Among other software installed was Oracle 10g r2. There were issues with Oracle in its new location where it was trying to reference the old computer name.
I assumed that all I would have to do to correct the issue was to search all of Oracle’s .ORA files and replace the old server name with the new one. (Plus, of course, changing the Windows Host file entry).
But I’m finding that Oracle on Windows apparently has many other references to the original computer name. For example, there are subdirectories in the Oracle Home directory tree structure where the directories themselves contain the old computer name. (I’ve attached a screenshot of a file search off the Oracle directory tree for “BRI2KSRV” which is the test server’s old name. “Bri2ksrv.jax.fnfis.com” was the server’s old fully qualified name. ORCL is/was the default instance name).
For example, these directories were found:
..\oracle\product\10.2.0\db_1\bri2ksrv.jax.fnfis.com_orcl
..\oracle\product\10.2.0\db_1\log\bri2ksrv
..\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_bri2ksrv.jax.fnfis.com_orcl
What are the recommended steps when changing the Windows computer name (and thus the fully qualified network references) on a Windows 2003 Server which has a functioning Oracle 10g R2 instance?
Thanks!

These directory you mentioned are EM control directory. You need to reconfigure your EM with new server name.
If you are using server name instead of IP address in listener.ora and tnsnames.ora you need to change these as well.

NTDLL.DLL issue with HRBLOCK.EXE application

I am on Windows 7 64-bit and everything works fine. I recently downloaded the 2014 H&R Block Tax program on my new computer and ran the installation. Installed fine. Go to use it and it starts up but fails with a reference to NTDLL.DLL
and H&R Block is stating it is not their problem but a Microsoft issue. Can find any fixes and this is stressing me out.
The information from the event log is listed below. Any assistance would be appreciated. Note I have processed SFC /scannow with no issues.
Log Name:      Application
Source:        Application Error
Date:          1/18/2015 12:16:16 PM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      B21NL12.corp.pcconstruction.com
Description:
Faulting application name: HRBlock2014.exe, version: 2014.2.0.5501, time stamp: 0x549461f3
Faulting module name: ntdll.dll, version: 6.1.7601.22436, time stamp: 0x521eaa80
Exception code: 0xc015000f
Fault offset: 0x000845f9
Faulting process id: 0xbc0
Faulting application start time: 0x01d0334276d057a5
Faulting application path: C:\Program Files (x86)\HRBlock2014\Program\HRBlock2014.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: b5a8cfe7-9f35-11e4-88cf-f8165496897a
Event Xml:
<Event xmlns=>
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-18T17:16:16.000000000Z" />
    <EventRecordID>27735</EventRecordID>
    <Channel>Application</Channel>
    <Computer>B21NL12.corp.pcconstruction.com</Computer>
    <Security />
</System>
<EventData>
    <Data>HRBlock2014.exe</Data>
    <Data>2014.2.0.5501</Data>
    <Data>549461f3</Data>
    <Data>ntdll.dll</Data>
    <Data>6.1.7601.22436</Data>
    <Data>521eaa80</Data>
    <Data>c015000f</Data>
    <Data>000845f9</Data>
    <Data>bc0</Data>
    <Data>01d0334276d057a5</Data>
    <Data>C:\Program Files (x86)\HRBlock2014\Program\HRBlock2014.exe</Data>
    <Data>C:\Windows\SysWOW64\ntdll.dll</Data>
    <Data>b5a8cfe7-9f35-11e4-88cf-f8165496897a</Data>
</EventData>
</Event>

Hi Randy ,
Ntdll.dll file is a file created by Microsoft that has a description of "NT Layer DLL" and the file contains NT kernel functions.
Considering you have performed a system health scan and there is no problem found .There is still a possibility that the installation of this program has suffered a corruption though there is no error found during installation .
Have you tried to uninstall and reinstall it to have a check ? Please ensure you have got the latest version of this program .
Meanwhile I found a similar symptom and the OP has resolved it ,it may be helpful to you .
2014 HR Block Premium Fed+State - Program crashed(Pay attention to steveu1`s answer )
http://community.hrblock.com/t5/DIY-Products/2014-HR-Block-Premium-Fed-State-Program-crashed/td-p/57634#.VL4ANHkfrwo
NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Best regards

BUG? Application Module State Management

I have 2 read-only view objects VO1 & VO2 with a View Link that links them by a primary key field. VO1 (master) is on the first .jspx page and VO2 (detail) is on the 2nd .jspx page. VO1 has a SQL query, but is populated programmatically in an App Module Service method that sets the where clause parameters. VO2 is on a separate .jspx page. VO2 has one bind variable in its SQL query that is populated when the user clicks a commandLink on a row within VO1 - this takes the user to the 2nd .jspx page to view VO2 table results.
The issue is that when the user navigates back to the first .jspx page containing VO1, a duplicate row is added to the end the data table (or as the first record on the second page of results if there are multiple pages.) If I re-query VO1, re-sort the data using the column headings, or passivate the data (see below), the duplicate row goes away. Note I have tried using the same iterator on both pages and this same issue occurs.
Ok - after 5 days of troubleshooting, here is the potential bug. If Application Pooling is enabled on the Application Module, I experience the issue above. If I don't enale Application Pooling, and Passivate state for the App Module, this issue does not occur (see below):
Application Module Settings - Error Occurs if Pooling is enabled
(unchecked) Failover Transaction State Upon Managed Release
(unchecked) Disconnect Application Module Upon Release
(checked) Support Dynamic JDBC Credentials
(checked) Reset Non-Transcational State Upon Unmanaged Release
(checked) Enable Application Module Pooing
If I un-check Enable Application Module Pooling the error does NOT occur. Note I've experimented with many combinations, and its only the Application Module Pooling that affects the behavior.
Note both view objects are set to Passivate state (but not for transient values, though tested passivating those as well and there was no difference.)
Can someone please advise? This is a showstopper for implementing our application to production. See the threads below for more information. Finally note that I have not yet been able to replicate this in a simple test case, but there is some specific characteristics about my current application causing this behavior (and it appears others have experienced as well.)
Duplicate rows displayed in list
Need help - Duplicate Rows being added to View Object?
Thanks.
Here is the code on the AM service method to populate the rows for VO1 (no insert or create rows - only executing the query):
ViewObject vo1 = findViewObject("VO1");
vo1.setMaxFetchSize(250); // set max fetch size 250
vo1.setWhereClauseParam(0, x0);
vo1.setWhereClauseParam(1, x1);
vo1.setWhereClauseParam(2, x2);
vo1.setWhereClauseParam(3, x3);
vo1.setWhereClauseParam(4, x4);
vo1.setWhereClauseParam(5, x5);
vo1.setWhereClauseParam(6, x6);
vo1.setWhereClauseParam(7, x7);
vo1.setWhereClauseParam(8, x8);
vo1.setWhereClauseParam(9, x9);
vo1.setWhereClauseParam(10, x10);
vo1.executeQuery();
Message was edited by:
javaX

More information on this issue:
After further testing, I discovered that the 'Disconnect Application Module Upon Release' also plays a factor with this issue.
If 'Enable Application Module Pooling' is unchecked the issue does not occur because the view object is passivated.
If 'Enable Application Module Pooling' is checked (jbo.ampool.doampooling=true), then the issue occurs UNLESS I also set 'Disconnect Application Module Upon Release' (jbo.doconnnectionpooling=true). If I set the latter to true, then I do not experience the duplicate row issue. I would rather not have to enable jbo.doconnectionpooling=true because of the performance impacts as recommended in the dev guide. Any Suggestions?
-- updated on 10/1/06 ----
Setting jbo.doconnectionpooling=true only fixes this issue when I use a ViewLink as the mechanism to pass the row Id from VO1 (master on .jspx page #1) to VO2 (detail on page #2.) If I use an actionListener to pass the value from page #1 to page #2, setting jbo.doconnectionpooling=true does not fix the issue.
<af:commandLink actionListener="#{bindings.setCurrentRowWithKey.execute}"
action="page2" text="#{row.Name}">
<af:setActionListener from="#{row.Id}" to="#{backing_bean_page2.rowid}"/>
</af:commandLink>
Message was edited by:
javaX

Issue with Surveys/Checklist in SAP Sservice Manager 4.0 for PPC Platform

Hi All,
I am working with SAP Service Manager 4.0 application . I was checking the Surveys functionality in the standard application and came to know that the surveys functionality is not available in PPC platform.
However it is present for Iphone/Ipad platforms.
After a detailed check I found that the button which initiates the survey List screens are available in iphone/ipad but not in PPC . where as the Surveys List screens is available for all the 3 platforms iphone/ ipad / PPC .
Is this a issue in the standard application or the Surveys is not included for PPC platform.
Please clarify
Thanks and Regards
Neha Mahanty

The surveys functionality was not included for PPC platform in the Service Manager 4.0 release. There was I beleive a technical issue that prevented it from being included. It may be included in a future release.
--Bill

Issue with GP getting into Erroneous State

Hi Experts
I have an issue with GP Process getting into Erroneous State. We have a series of steps in the Guided Procedure Process. The process instance passes a few of the initial steps in the procedure and getting struck at a particular step and leading the process to erroneous state.
I am just trying to find out what would be the possible reasons for a process to get into erroneous state.
Kindly get us all possible suggestions to find the root cause for this issue.
Appreciate your help in advance.
Kind Regards
Ramamoorthy D

Hi Louis Hunag
Thanks a ton for responding to my query.
It is a User Interface Callable Object. Can you please elaborate on this in detailed manner. I have assigned the right user account to manage the execution role. Below is what I have done.
In the GP Process, there are 4 default roles 1. Owner, 2. Default Processor, 3. Overseer 4. Administrator. All these were mapped with one ID from UME. What is the problem in this? Kindly let me know.
Tx.
Best Regards
Ramamoorthy D

Full craw issue with specific web application

We are using SharePoint 2013 Enterprise (15.0.4569.1000). We have public facing (publishing site) with anonymous access enabled on it. While crawling this site we are using default Content Source called "Local SharePoint sites" where we have following
settings.
Start Addresses - http://SP2013APPSRV
Crawl Settings - Crawl everything under the hostname for each start address
Crawl Schedules - Enable Incremental Crawls
With this configuration we try to perform Full Crawl of this content source. the status of this content source goes to "Starting" then to "Crawling Full" and after some time then to "Idle" state. The overall crawl duration never
goes beyond 3-4 minutes. With this if we check the "Crawl Log" screen then except for "Successes" = 1 every other column shows 0 even the "Errors" or "Top Level Errors" column shows no record. Getting into the Success
items we found that the crawling was only done for the single item which is nothing but the start address that was specified into the content source settings (http://sp2013appsrv). Because of this it seems the crawling is not working correctly to pull all
the sub contents of the given host URl, instead it only pulls the top level link. There is nothing helpful in Verbose - ULS logs or event viewer either.
With further analysis of this we found that this issue only exists with single web application only. Because adding another web application URL into the same Content Source does crawls all the contents properly of that web application but still shows single
index item for problematic web application.
Could someone please help us with this issue ?

Hi Ajay,
Based on your description, you have some problems in doing full crawl of a specify web application.
1. Check if the crawl account has 'full read' access to affected web application.
2. Check if allow this site to appear in search results in the search and offline availability in the site setting.
3. Check if you have
opened the urlMappings in SharePoint that will hinder the search function crawls. If you add the code as below into the web.config to open the
urlMappings, it will not crawl the web application.
<urlMappings
enabled="true">
<clear
/>
<add
url="~/Home.aspx"
mappedUrl="~/Default.aspx?tab=home"
/>
<remove
url="~/Home2.aspx"
/>
</urlMappings>
4. Try to reset your search index and then do a full crawl.
The article gives you the details about how to reset your search index.
Best regards,
Victoria
Victoria Xia
TechNet Community Support

Issue with User web page into Call Manager

Hello
I have an issue where all my users can log into their User page on UCM but when they make a change to speed dial or anything else, the change does not reflect on the phone in UCM. Doing a reset from their web page doesn't reset the phone. This is UCM 7.1.5 and the standard ccm end user group is enable for all end users.
thanks

Hi Bill -
Have you verified your User Management Roles and effective permissions? Go to User Management - Roles - select Standard CCMUSER Administration and for the permissions you want, ensure both Read and Update are selected.
Role Information
Application
Cisco Call Manager End User
Name
Description
Resource Access Information
">Resource Description Privilege
read                                               update
CCMUser: Access List
read                       update
CCMUser: Device
read                       update
CCMUser: Directory
read                       update
CCMUser: Fast Dials
read                       update
CCMUser: IP Phone Services
read                       update
CCMUser: Line Settings
read                       update
CCMUser: Personal Address Book
read                       update
CCMUser: Plugins
read                       update
CCMUser: RemoteDestination
read                       update
CCMUser: Service URL
read                       update
CCMUser: Speed Dial User
read                       update
CCMUser: User Settings
read                       update
You can also check an individual's effective permissions by using these procedures:
Viewing a User's Roles, User Groups, and Permissions
This section describes how to view the roles, user groups, and permissions that are assigned to a user that belongs to a specified user group. Use the next procedure to view the roles, user groups, and permissions that are assigned to a user in a user group.
Note: You can also view user roles by using User Management > Application User (for application users) or User Management >End User (for end users) to view a particular user and then display the user roles.
Choose User Management > User Group.
The Find and List User Groups window displays.
Find the user group that has the users for which you want to display assigned roles.
Click the name of the user group for which you want to view the roles that are assigned to the users.
The User Group Configuration window displays for the user group that you chose. The Users in Group pane shows the users that belong to the user group.
For a particular user, click the i icon in the Permission column for the user.
The User Privilege window displays. For the user that you chose, this information displays:
User groups to which the user belongs
Roles that are assigned to the user
Resources to which the user has access. For each resource, this information displays:
Application
Resource
Permission (read and/or update)
Now if both items above look OK, you might check your DB replication status. I assume you have a Publisher and one or more Subscribers? User phones registered to Subscriber? You can check replication several ways:
CLI
RTMT
Unified Reporting on CUCM administrator web page - select "Unified CM Database Replication Debug" report. This is the easiest.
The desired Replication State is 2.
Here is some further information:
Check the DB replication status on all the Cisco Unified Communications Manager nodes in the cluster to ensure that all servers are replicating database changes successfully. You can check by using either RTMT or a CLI command.
• To check by using RTMT, access the Database Summary and inspect the replication status.
• To check by using the CLI, enter the command that is shown in the following example: admin: show perf query class "Number of Replicates Created and State of Replication"
==>query class :
- Perf class (Number of Replicates Created and State of Replication) has instances and values:
ReplicateCount -> Number of Replicates Created = 344 ReplicateCount -> Replicate_State = 2
Be aware that the Replicate_State object shows a value of 2 in this case. The following list shows the possible values for Replicate_State:
0—Replication Not Started. Either no subscribers exist, or the Database Layer Monitor service is not running and has not been running since the subscriber was installed.
1—Replicates have been created, but their count is incorrect.
2—Replication is good.
3—Replication is bad in the cluster.
4—Replication setup did not succeed.
I'm thinking it's more your Roles/permissions and not replication, but I included just in case. Hope this helps!
Ginger

How to use Portal SSO with existing BSP application

Hi all,
we run SAP EP 6.0 here and have a single start BSP page of
an application integrated with the SAP appintegrator for BSP. The rest of the existing BSP application still uses
the login functionality based on CL_BSP_LOGIN_APPLICATION
and is not integrated in the portal.
Problem: If a user directly accesses one of the "old" BSP pages, he should be redirected to the portal to auth. him via SSO and afterwards the original BSP page with all its parameters should be processed.
How to deal with that? Is there a similar mechanism like with the BSP_LOGIN_APP in between for the SAP EP?
Thanks for your help!
-RAINER-

I think that doesnt solve the problem.
I have 2 systems: SAP ECC with all BSPs and the portal on another system. So I have to entry points: Via portal using the appIntegrator BSP or directly to the ECC.
As-is: If the auth. for the BSP appl. fails, the user is re-directed via the error page given in the service (SICF)
to a BSP login app. and from there to the requested page.
No portal in this concept.
Must-be: A user is still able to directly access a BSP on the SAP ECC by entering the URL in the browser. It's not a must entering via the portal first.
So when the login failed on the ECC (no SSO ticket), he should be redirected to the portal for getting his SSO.
After he signed in successfully the user will be forwarded to the BSP page he entered in the browser the first place.
I can't see a way to use the URL iView. I am thinking of simply changing the login mechanism of the BSP using the portal login functionality.
The link you gave me offers an implementation of CL_ICF_SYSTEM_LOGIN. Any ideas?
Regards,
-RAINER-

Issue with reinstalling a brand new mac pro

I was recomended to reinstall the leopard since I had some issues with my new 27"
cinema display.( there is an update for the cinema display and my mac did not allow me to updat it so apple care person told me to reinstall the leopard.
After 15 minutes in gto the reinstalling the mac pro has stopped responding and i have a white background with apple logo in the center of the screen fro the last 2 hours.
Any recomindations until the apple care is back on the line.

Make sure you have the display usb cable connected as some of the functionalities
are addressed through the usb cable.

Issues with Apple's Application Loader

I have been having some issues delivering my ePub to iBooks through Apple's Application Loader device. I've contacted Adobe, who says my file is fine. Then Apple, who says there is an issue with my file. Then back to Adobe, who says their help ends with inDesign. Then back to Apple, who says I have to talk to Adobe.
Ever since kicking us publishers off Adobe DPS, I have been having unanswered issues with producing iBooks, which is the way that we have to produce inDesign files now. Namely, I get an issue saying an image, that isn't in my inDesign file, is too big to upload to Application Loader.
Has anyone had similar issues? Please help?

Hello suecheat
Check out the article below to continue troubleshooting your issues with sending mail. You will use Connection Doctor to find out the specific issue.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
Regards,
-Norm G.

Hi people, I've a problem with my BSP application (updating IE6 to IE7)

Hi,
Right, I had a BSP application runs with IE6(internet Explorer 6), but now I updated my explorer to 7 version.
Now, when I go to my BSP application, when loads, makes an Error, like 'An Error was ocurred in the sript on this page'.
Someone Can help me?
Thanks,
Sergio.

Ok!, with design2003, Runs Ok!, but... my question is, Only runs ok with "design2003"?
Thanks.

Facing issue with adding systems in SMSY - solution manager

Hi all,
    We are facing an issue with the solution manager in tcode smsy. When i create a system in the corresponding component say ECC with product version ECC6.0.The next screen shows that the <SID> has been added successfully. But when i navigate to the path and i unable to see the system SID which i have created.
   Again i have tried to create the same system with same SID, but it shows that " SID already exists "
   Also i need another suggestion, we have planned to add 60 systems in the same solution manager. Kindly suggest me , how many systems we can add in single solution manager in maximum and for configuring EWA ?
Thanks
Raj

Hi Raj,
You can delete the old system entry and then try creating the saem again..
Also while creating mention correct product and version and the installation number.
You can also use the assistant for this.
Have you added all your servers and DB?
regards,
Raja. G
Edited by: Raja Gunasekaran on Aug 28, 2009 1:26 PM

F4 help issue with Webdynpro ABAP application

Hi,
I am facing a strange issue with the F4 help in my webdynpro abap application.
I have few fields for Purchase Order and Line item on the screen and they have corresponding F4 helps associated with them.
When i select for F4 help, sometimes the screen simply blanks out and a white screen is displayed. When i refresh the screen and try the same scenario again, i can see the value list correctly.
This issue occurs very randomly with no specific pattern. If anyone else has faced this issue earlier, kindly let me know how to get rid of this issue.
Any pointers to resolve this issue will be helpful.
Note: I am using SAP version 702 SP09.
Thanks,
Ramanath

Hi,
we cannot help you from offline, you need to check the standard procedures like
SICF->is your application node is active.
FQDN->check fully qualified name is configured
You can also try to execute standard SAP application, if sap application also has problem running then you may have to get the help of BASiS people to look into that and raise a support ticket.
If sap applications are running and your custom developed applications are not running then look into this application if there is any URL parameters need to supply etc.

Issue with : Stateful BSP Applications: New State Management Option

Similar Messages

Maybe you are looking for