Issue with step "Installing Operating System"

Hello,
Just wondering if anyone can help me as I've been pulling my hair out for a week over this one. I had my task sequences working fine a couple weeks back and now they fail with this error:
The execution of the group (Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
TSManager 20/03/2015 16:29:21
1276 (0x04FC)
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Incorrect function. (Error: 00000001; Source: Windows)
TSManager 20/03/2015 16:29:21
1276 (0x04FC)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,767)
TSManager 20/03/2015 16:29:21
1276 (0x04FC)
Task Sequence Engine failed! Code: enExecutionFail
TSManager 20/03/2015 16:29:21
1276 (0x04FC)
Task sequence execution failed with error code 80004005
TSManager 20/03/2015 16:29:21
1276 (0x04FC)
I've googled around and tried a lot of 'fixes' I've found from various sites but nothing seems to have remedied this issue. The only thing that changed (That I can think of) is the IP of the VM was changed to a different one. This seems to be when it started
failing. All steps leading up to this point seem to work fine. Does anyone have any sugggestions? This is on a newly built, Hyper-v, server 2012 R2, MDT 2013 setup.
Much Appreciated..!

It would be helpful to get the bdd.log files to debug the issue.
Can you upload them to a public site like onedrive and share the link here?
How to find the right MDT log files (bdd.log/smsts.log) to debug
problems.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Similar Messages

Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.

Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

After I installed 7 on my IPad none of the keyboard functions work properly. seems like microsft had something to do with this new operating system. any know what I did wrong

after I installed 7 on my IPad none of the keyboard functions work properly. seems like microsft had something to do with this new operating system. any know what I did wrong

Thanks for the quick advice!
Unfortunately, I am still unable to open my core productivity apps, namely Skype and Evernote. Twitter, as well, could not start. But interesting quick fix though, I never knew you could do that.
Here's the error log after the restart:
What else should I try?

MDT 2012 \ WinPE 3.0 Slow Install Operating System

I have an issue with a custom wim I have incorporated into my Task sequence. When I use a custom Wim, at the point where the MDT Tasksequence begins to "Install Operating System" it slows down to a crawl. What previously took 5-10 minutes on a
previous wim, is now taking 30-50. When the "Install Operating System" task begins, it starts a at a very decent rate, you can see the percentage or time increasing/changing every few seconds with out issue, but when it gets to 30% completion, it
starts to slow down dramatically. Eventually it will get to 100% Completion, where it will stay for the next 5 minutes, at which point it will apply the unattend.xml which will also take a very very long time to complete.
Once it reboots from applying the Unattend.xml everything runs normal.
My Setup:
I am using MDT 2012 - with WinPE3.0
To create my Custom Wim I did the following:
I created a brand new standard tasksequence, to deploy an OS to a machine, install updates then sysprep and capture to a wim. I set a custom variable in the tasksequence which set DoCapture=Yes. This allowed me to Capture the Operating system after the windows
updates were done without having to do any additional steps. I then imported the Image into the operating systems section of my MDT Deployment share, and incorporated it into my previous Tasksequence.
I have also noticed that the size of the wim file I created is about 1.5 gigs larger than my previous wim.
Steps I've Taken for remediation:
I've tried rebuilding my boot.wim several times.
Increased the scratch size from 32 -> 64 -> 256 -> 512MB
Removed unnecessary drivers from the boot.wim
Any ideas you guys might have with regard to getting my Install Operating System phase to speed up to normal speeds with be greatly appreciated. Is there an extra step with the install.wim that I importing into MDT that I should be doing?

I completed a robocopy in the full blown OS to download the 4.9g wim, it takes 1 minute and 36 seconds. It does have gigabit connection active in the full blown os.
When I am running WinPE, Task Manager is showing my local area connection is running at 1Gbps.
Another discrepancy I'm noticing is that @ 12:16:04 [Line1801] the task sequence finishes apply the wim. It takes 10 minutes for it to start the next task found on Line 1807. Any Ideas on why it taking so long to apply the bootsect.exe
command?
I did disable the "Apply Patches" task, and it did remove 20 minutes by not applying those patches. Thank you for that suggestion.
MCSA Server 2008R2 \ 2012 MCSE Server Infrastructure CCNA

"Possible precedence issue with control flow operator"

Hi guys
I have following Problem:
Yesterday I made a distribution update from debian wheezy to debian jessie.
Since then I got a problem with a plugin which I'm using for Icinga a monitoring system.
When I run it, I got the error that there is an "Undefined subroutine".
I read on google that I can fix it, with reinstalling the vsphere SDK, but the installation stuck at "CPAN is downloading and installing pre-requisite Perl module "SOAP::Lite"".
I can skip this step with Ctrl+C and at the end it says "This installer has successfully installed...".
But when I run the Plugin I get the error message "Possible precedence issue with control flow operator at /usr/share/perl/5.20/VMware/VICommon.pm line 2147." and the whole plugin stucks.
I tried the following step which I found in this forum and the error message doesn't appear, but the plugin still stucks...
Re: VMware-vSphere-Perl-SDK-5.5.0-1384587 broken with perl 5.20
I have also Perl 5.20.2...
Can you guys help me?
Vinzenz

Ok I could fix it...
I changed the line 2147 to
return (defined $user_agent->cookie_jar and
$user_agent->cookie_jar->as_string ne '');
And this time I waited for a long time and I get a error message that there is a problem with SOAP.
The solution was to downgrade Net-HTTP and libwww-perl with following commands:
perl -MCPAN -e shell
o conf urllist push http://backpan.perl.org
install GAAS/Net-HTTP-6.03.tar.gz
install GAAS/libwww-perl-6.03-tar.gz
The second Command loads older releases to the urllist.
Thx for your help and I hope I could help others with the same problem.
Vinzenz

I cannot transfer my Ical on my Imac with Mavericks 10.9.2 to my iphone 4 with the latest operating system. I get error message "403" when it attempts to upload to the cloud before transfering to the iphone. Any advice would be greatly appreciated.

I cannot transfer my Ical on my Imac with Mavericks 10.9.2 to my iphone 4 with the latest operating system. I get error message "403" when it attempts to upload to the cloud before transfering to the iphone. I've tried shutting down the computer and iphone but it has not been successful. There is plenty of data available on the icloud as I've not used it for anything else. Any advice would be greatly appreciated. Thank you.
Kevin

Hello kmcnern3,
Thank you for providing the details of the calendar issue you are experiencing with your iMac and iPhone. I recommend following the steps in the section titled "Troubleshooting on OS X" in the following article to assist with syncing your calendar events between your devices:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thank you for using Apple Support Communities.
Best,
Sheila M.

Satellite A300 - Cannot install operating system

I just bought a notebook Satellite A300.
At the begining it had no operating system, but the one at the store installed me Windows 7 ultimate (trial).
Now i have problems installing other system.
It shows me an error and one more thing. When i bought the notebook it had no cd-s, no drivers, nothing, it is ok?
Please respond me, I don't know what to do.

Hallo Alexandra
I have the same notebook model and at first I want to say that you got good choice. Satellite A300 is supported for WXP, Vista and for newest Win7 too. I have tested performance with all three operating systems and to be honest, best performance is under Win7.
So I recommend you to install Win7. I can help you with exact, step-by-step guideline.
If you want to install WXP you MUST use WXP SP2 or WXP with SP3. Your notebook has SATA HDD inside and when WXP installation starts you must load SATA driver (F6 option when WXP installation starts). This SATA driver can be loaded with floppy disc. Other way you must create WXP installations CD with integrated SATA driver. For this purposes you can use nLite software. It can be a little bit complicated.
Using Win7 you don't need this SATA driver.
Please let me know your opinion about all this.
At the end I must say that you should maybe look forward and learn to use newest operating system and newest compatible software. We all like WXP but it is time to say goodbye. Do you agree with me?

How to install operating system on T61 from recovery folder.

Hi,
I bought T61 lenovo laptop on October 2007. It's almost more than one year. I didn't upgrade my warranty due to some reasons.
Now my system infected with virus. I would like to install operating system (i.e windows XP).
When I bought this, I didn't receive any operating system Recovery CD. I came to know that...... they provide recovery folder in the system itself. with that recovery we can install operating system.
Could you pls let me know the path for recovery folder and let me know the installation procedure step by step.
Thanks in advance
Raghu

Restart the computer, When you see the IBM/Lenovo splash screen press the blue Thinkvantage button. From there you can select recover my computer or restore to factory condition (depends on software version). Follow steps to restore.When completed make a set of recovery discs. If possible do this before restoring. The discs will be necessary if something goes wrong.
To make the discs click Start/Thinkvantage/Create recovery set. (the names vary with XP or Vista)
T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
T400 2765-T7U Windows 7
Registered Linux User #160145
FYI: I am not employed by Lenovo

Why can't I upload Adobe CS3 on another Mac with the same operating system 10.5.8?

I purchased a MacBook Pro in 2008 and had it installed with Adobe CS3 at the Apple Store. I don't believe I was given any CDs or serial numbers to take home. I still have all the documentation for my other programs I installed myself, like Logic, Final Cut, etc. and those installed fine on my new Mac desktop computer, with the same operating system (10.5.8) as my MacBook. For whatever reason, I don't have the documenation for CS3, but I was able to download a serial number finder and locate the serial number for my version of CS3. But when I enter that serial number into the new computer, Adobe says the serial number is invalid. I thought standard licenses allowed for 2 computers (home/work) per serial number. This is the first computer I've tried to install CS3 on so it seems I should have no problem. Any help here? I'm on a ticking clock because my MacBook could crash any day and I need to get the programs switched over to my new computer. I appreciate any help.
Thanks,
Gerald

Contact serial number support by phone or web chat.
Mylenium

I'm using mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts- I didn't have any problems with it before the upgrade and in safari I don't have this problem.

Hello, I'm using Mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts… I didn't have any problems with it before the upgrade and in safari I have no problem with it. please help me- I don't like to use safari a my browser...

elly903 wrote:
Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly...
Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) for $15:
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
It will input your Quicken PPC data file directly if it was Quicken 2005 through 2007. If older you need Quicken 2006 or 2007 PPC first to convert your data file; and this update must be done BEFORE you upgrade to Mavericks:
http://quicken.intuit.com/support/help/patching/quicken-2006-manual-updates--mac -/GEN82200.html
Filemaker Pro PPC (in this case 7) running in Snow Leopard Server installed into Parallels for use in Lion, Mt. Lion and Mavericks:
[click on image to enlarge]
Snow Leopard Server: 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)
This solution allows you to run your Photoshop Elements in Mavericks concurrently with Filemaker Pro PPC. Mavericks is a free download.

Sapinstallation error in second step Install common system File.

Hi,
I am installing the SOLMAN on Linux RHEL5 and i am facing the error in second step Install common system File .
sapinst.log ERROR Logs ;
Output of /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh is written to the logfile installsapinit.sh.log.
WARNING 2011-08-15 09:56:21.770
Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found
ERROR 2011-08-15 09:56:21.774
MUT-03011 Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found
ERROR 2011-08-15 09:56:21.913
FCO-00011 The step installSAPInit with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_System|ind|ind|ind|ind|system|0|installSAPInit was executed with status ERROR ( Last error reported by the step: Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found).
Can any one please help me on this...

Hello,
the "uname" command is part of the coreutils package on RHEL. Please check if the coreutils package is installed:
rpm -qa | grep -i coreutils
If the coreutils package is not installed you can install it with
yum install coreutils
Regards,
Frank

MDT 2012 - Failed to Run Action: Install Operating System Access is Denied (Error: 0000005; Source: Windows)

Unable to deploy any image with WIM file. Vanilla or Custom Image gives the following error:
ZTI Error – Unhandled error returned by LTIApply: invalid procedure call or argument (5)
Litetouch deployment failed, Return code = -2147467259 0x80004005
Failed to run action: Install Operating System.
Access is denied (Error: 00000005; Source: Windows)
Tried Giving Everyone Full rights to the deployment share
Rebooted Server
Updated Deployment Share
Any ideas would be great!
Thanks
Rick
Richard Ray

https://skydrive.live.com/redir?resid=57E5397C8C507949!129&authkey=!AJDCfz7nGblrdQE&ithint=folder%2c.log
Please try this link.
Kris Da San Martino
The SMSTS.log shows
Expand a string: WinPEandFullOS TSManager 2/18/2014 1:35:48 PM 1508 (0x05E4)
Executing command line: cscript.exe "%SCRIPTROOT%\LTIApply.wsf" TSManager 2/18/2014 1:35:48 PM 1508 (0x05E4)
Process completed with exit code 5 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
!--------------------------------------------------------------------------------------------! TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Failed to run the action: Install Operating System.
Access is denied. (Error: 00000005; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Sending status message . . . TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Set a global environment variable _SMSTSLastActionRetCode=5 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Clear local default environment TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Let the parent group (Install) decides whether to continue execution TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
The execution of the group (Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Access is denied. (Error: 00000005; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Sending status message . . . TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,767) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Task Sequence Engine failed! Code: enExecutionFail TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
**************************************************************************** TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Task sequence execution failed with error code 80004005 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)

Is Elements 6 for Mac compatible with new Lion operating system?

I'm planning to buy a new iMac with OS X Lion. Will the Photoshop Elements 6 for Mac program that I am currently using be compatible with the Lion operating system?

Adobe's official response about any software and any major operating system update is that since the software wasn't tested on the new OS, they don't consider it compatible. Just as they never update the system requirements to show updated versions of the compatible OS. They just don't go there at all. If you called them they would say no, but not based on experience or experiment, merely on policy.
I don't think there's anything especially complicated--based on what I hear in real life, people who don't have Open in Rosetta turned on when they upgrade to lion are mostly okay, while there's no way to make it go if you did have it set for Rosetta. I would guess a new install would be fine, but I haven't had a chance to try it out myself yet. Scanning and such are likely to have problems, and of course older ppc plug-ins won't work anymore.

Query Regarding Compatibility of OBPM 11g Suite with Windows 8 Operating System

Dear Members,
I want to know if Oracle BPM 11g suite is compatible with Windows 8 Operating System or shall I go for a Windows 7 OS?
Will I be able to install JDeveloper on a Windows 8 system and other components related with OBPM 11g Suite .
If anyone is using OBPM 11g in Windows 8 PC please share your experience.
Thanks,
Binay

So far the official certification matrix does not include Windows 8. Have a look under http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls.
Regards, Danilo

Captivate 7.1 not working with latest Android operating system

Courses created with Captivate 7.0.1.237 are not working on tablets with Android's latest operating system - KitKat. The play arrow in the middle of the screen remains onscreen throughout the course. In some cases, it stops the course and buttons become inactive. In other cases, the course plays, but the arrow is still there and the sound is gone. The courses work with an older operating system. We are using the latest Chrome browser. Is there a fix? (Other than publishing with Captivate 8 - courses are on the client's LMS and we do not want to have to replace them.)
Thanks

Chrome version 36 has some issues with captivate html5 output. Please find the following workaround if you are using Chrome.
http://blogs.adobe.com/captivate/2014/07/update-on-captivate-html-5-content-playback-issue -in-google-chrome-browser.html

Issue with step "Installing Operating System"

Similar Messages

Maybe you are looking for