Issue with the home buton... HELP
So I just purchased my iPhone4 yesterday and here I am less than 24hrs later and there's an issue with the home button. Either the button won't work at all and I have to restart the phone, or its magically being held down and the voice control is activated and if it hears anything its automatically playing music. On top of this when I woke up it said that I needed to restore the phone and I did like four times and nothing happened. I haven't been this stressed out in forever, PLEASE help, there's a handsome reward if anyone can walk me through this issue, thanks!
Gryffindor87 wrote:
Back to an apple store or would AT&T work? Closest Apple store is an hour away >.<</div>
I would start with where you bought it and go from there.
Dave
Similar Messages
-
Can't see my computer from the Apple Tv although home sharing is on in both devices and I can choose Apple Tv as an output from my computer.
The following article(s) may help you.
Understanding Home Sharing
Setting Up Home Sharing On A Computer
General Homesharing Help 3
(75) (10) (35) (-30) (140226)
Welcome to the Apple Community.
The following article(s) may help you.
Troubleshooting Home Sharing
Security Software Issues
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful. -
I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?
What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now? -
I am still having issues with the TOC pictures. I got several chapter/section photos to show up, but can't seem to repeat this success. It is some mystery that happened during a time that I had practically given up. This should be such a simple thing. Drag and place a picture into the placeholder and it shows up in the TOC....right? Help, help help! want to get this thing done and it's taken two days of work just get some of the photos to show up. I am going to have to publish this ibook with no photos in several sections.....why can't this be simple? I have even had someone else spend hours trying to figure this out. This software is such a GREAT idea....come on...help with this little part of it.
I had the same problem myself. I got to the point where I couldn't replace the photo, of a new chapter, in the TOC. What I did was to duplicate an existing chapter that was working and was able to replace it's TOC's photo. I also found that if you try different areas of the photo you can sometimes get it to replace correctly. For example, instead of dragging the new photo to the middle of an existing photo, try dragging it to the right top corner.
-
I tried updating my iPhone3g through itunes. Now i'm stuck in recovery mode and i've EVERYTHING even websites and such but nothing worked out! I've also tried restarting and fiddling with the home button but nothing still worked. Please help! What should I do??
Well, if you've indeed tried EVERYTHING, then you'll need to bring your phone to Apple for evaluation.
-
The "From" column in my Yahoo! e-mail account is blank. I trouble-shot it with them to no avail and they determined it was probably an issue with Firefox. Please help it has been like this since Monday! Furthermore, it appears fine when I view my Yahoo! e-mail while using the Google Chrome web browser.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies" -
Since the previous computer crashed without my Adobe CS3 Design Standard for Macintosh applications being uninstalled, I'm having issues with the CS3 on my new Macintosh laptop. Please help, I've tried using the online "contact us" with no success, unable to get in contact with a tech support agent that can assist me.
CS3 is too old to run on a new Macintosh laptop, sorry. You'll have to purchase CS6 or a Creative Cloud subscription.
-
i m having issues with the phone which i made a recording but the customer care support in our place donot seem to be of much help.
i have told them nuumerous times that for better understanding i have made a video of it but no response..
really disspointed with your customer support.
i have uploaded them in google docs..links below.. t
he first one happened on 30th of april 2014 https://docs.google.com/file/d/0B6z0lUXVGPGrc0tXNnZFaDQ3WDg/edit
the second happened today. i called customer care but no satisfactory respose either. https://docs.google.com/file/d/0B6z0lUXVGPGrSldEeWQ3aGFhaDA/edit
who is going to help me out and atleast pay attention to what my problem is. apple seems to ignore my attempts to show them what is the problem... the dont even want to see the videos.. !! disgusting.
its still under warrenty. please help.Take your iPhone to an Apple Store or authorized service center in the country where you purchased the iPhone and they will look at it and replace it under warranty if applicable.
If you cannot take it person contact them to determine how to send them your phone.
You can't expect them to replace your iPhone without first examining it. -
HELP NEEDED.....Yet Another Issue With The S510P
Okay first off, when I bought this laptop....I was using a computer I had owned since 2001 and it worked but was slow. Ever since I have purchased this laptop, I have encountered one issue after another. First it was registry errors, then after that it was trying to uninstall a program which it refused to do, Windows not loading properly, and now I am having issues with the Photo section of the Library. When I go to use a photo, half of them do not load and the ones that do are partially loaded. Which of course causes the computer to freeze up and the restart the page I was on, today this has happened 5 TIMES.
I need help fixing this, and I will also state I will NEVER purchase a Lenovo product again. Leave it to this company to sell a $700 computer that is riddled with issues and then to tell your customer that its their problem.
Mind you this is coming off of the heels of waiting 1 month for a freaking power cable, and then they tell me that they want the old one back or else they will charge me for it. Good luck Lenovo, it is under warranty so as you told me, "That's your problem."Hi cgraham86!
Welcome to Apple Discussions!
Unresponsive keys or key mapping issues are certainly not "normal" or how iPhone is designed to function. While it's impossible to know exactly what the issue is, your phone is covered for at least one-year by Apple against issues like this. That is of course, assuming there's no physical or water damage done to the phone. +General disclaimer, as I don't have your phone in front of me.+
As for the next step, it's obvious that someone within AppleCare needs to have a look at the phone and determine the issue (replicate, etc.). It is then that they can issue a more suitable solution and/or judgement on the issue. In the case of a visit to an Apple Store that would be a Mac Genius (via an appointment).
I'd say make an appointment, with your iPhone, explain the issue and get them to replicate it. While I certainly can't promise they'll swap the phone for you, it'd seem as though an unresponsive device feature is grounds for covered by the limited one-year hardware warranty. -
Problems with the home button and generally freezing and shutting down often.
I have had this iPad 2 for around 3 months. After about a month I noticed that I was having to press the home button multiple times in order to get it to respond. It is now at a stage where I have to press it as many as 12-13 times. It's won't do this every time but all day for maybe 3 out of 5 days the other times it works fine.
As well as this I have also had issues with the Internet shutting down, Skype going crazy, picture albums popping up and then vanishing and so on. I'm not a computer wiz but I would describe it as going crazy two or three times a day.
While I was in a shopping centre about a week ago I asked about the problems in an apple store. The man was very helpful and asked if I had it on me so he could look at it. Unfortunately I didn't be he said I could bring it back whenever I like and it would take around 30 mins for someone to check it out. He said most Likley they would just give me a new one and that would be that. So of course happy that it could be sorted I went home. Today I decided to drive the nearly two hours down to Brisbane after having a nightmare time trying to Skype my friend this morrning. I hot to the store and asked if it could be looked at only to be told I need an appointment. I showed the card that I had been given and explained what I had being told. To cut a long story short he agreed that I had been told that but said the assistant clearly didn't know what he was on about and that I should come back. I offered to wait but dispute the shop being more full of staff watching movies and downloading songs then actual customers I was basically denied any sort of help and told to call the office to arrange an appointment.
Sorry to rant! I just thought that apple were renowned for good service? 5 hours later I'm home with the same issues.
If anyone has had similar problem with the device or even customer service I would be intrested.
Regards,Me too! I had many bugs and returned my phone for a brand new one that did this the first time it was turned on at the Apple store. I was told it is a "software issue" and to "reboot the phone" if it continued to happen. It happens almost every time I try to use my phone. I've rebooted three times in a row some days. Nothing really seems to help. I keep waiting for an update.
-
ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second page of icons, black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?
I had this problem as well. This is what I found by searching online. I tried the fix on my nano 7th gen and it worked. I hope this helps you. Make sure to use two fingers for sliding and double-click the icons to get into settings. Good luck.
It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
iPod nano (6th generation and later): How to use VoiceOver
http://support.apple.com/kb/HT4317
To turn off VoiceOver on iPod nano using VoiceOver gestures
From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
Slide one finger around the screen until you hear Settings.
Double-tap to open Settings.
Slide your finger up or down the screen until you see or hear General, then double- tap.
Slide your finger up or down the screen until you see or hear Accessibility, then double-tap.
Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap.
Double-tap when you hear "VoiceOver switch button on."
You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
Note: You can also turn off VoiceOver by resetting your iPod. -
recently purchased the iphone5 (2 of them) and are having problems with the earpods. no sound when plugged in to the iphone. both phones. works with the ipad. help please
Hi P5052,
Welcome to the Support Communities ... and congratulations on the purchase of your iPhone 5's!
It is very unusual that neither phone is working with the new earpods.
Have you tried a different headphone just to see if the issue is with the earpods or the iPhones?
The article below will give you the basic troubleshooting steps for this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
iPhone: Can't hear through the receiver or speakers
Symptoms
When someone calls, I can't hear them through the receiver or speaker phone, and I can't hear music through the speaker. I also can't be heard by someone who is calling me.
Note: iPhone has one speaker, which is adjacent to the dock connector. On iPhone 4 or later models, the speaker is to the right of the dock connector. On earlier iPhone models, the speaker is to the left of the dock connector.
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
Hope this helps!
- Judy
<Edited by Host> -
Me and my brother have been messing with Assistive Touch on and off since iOS 5 canme out. We been noticing that when we actually move to use the home button, sometimes it doesnt respond. Though I'm all for thinking my home button my be on the fritz, it wouldnt explain how mine and my brother suddenly have issues with our home buttons at the same time. Both of us had a time where the home button didnt respond at all. and its been intermittent ever since. Anybody that has an answer or another case like this I' d like some information
Reset Home button steps:
(1) Tap Settings App, when it is open:
(2) Hold Power button until "slide to power off" bar appears.
(3) Don't slide it, release power button.
(4) Gently, continuously press Home button for few seconds until home screen appears.
(5) Done.
If this does not help, further points to Hardware Problem. -
Does anyone have issues with the instrument library?
I've installed iLife 08 and then added all the jam packs. Now when I open GB the default track is an accordion (not a piano) and when adding loops to the timeline they take on a different instrument sound (e.g. drum loop sounds like raindrops, etc.)
I've searched high and low for similar problems and have found nothing that resembles this, I've cleared my preferences and repaired permissions and still nothing helps, I've contemplated reinstalling but I have no guarentee that that will help and I'm reluctant to invent the 3 hours it will take to do all that if it is all for nothing...
Bottom line is...is this really an issue with the instrument library and is there any way for me to fix this without reinstalling?Just loaded the 6.0.2 update a few days ago. I was hoping it would fix the dropping of wifi where the 4g and 3g always kept. I have restored the router and I have even switched towers through AT&T's help, but to no avail. I still am dropped and sometimes it spins and spins looking to connect and then says, Cannot connect at this time. Sometimes it connects, and when the phone goes to sleep, it disconnects and then it is heck connecting again. I am very upset for I do not have unlimited data and my data has soared over 270 mg which I usually always kept way below 200 as being in my home most of the time. I am planning to take into AT& T store for a new one, just not happy with the wifi situation. It is sad that this cannot be fixed with an update. I saw earlier that some Iphone 5 made in China were the cuprits, and maybe I got one of those. I hope At&T and Apple are reading these dialogs. Please let me know if fixes are on the way!
-
Design issue with the multiprovider
Design issue with the multiprovider :
I have the following problem when using my multiprovider.
The data flow is like this. I have the info-objects IobjectA, IobjectB, IobjectCin my Cube.(Source for this data is s-systemA)
And from another s-system I am also loading the masterdata for IobjectA
Now I have created the multiprovider based on the cube and IobjectA.
However, surprisingly join in not workign in multiprovider correctly.
Scenario :
Record from the Cube.
IObjectA= 1AAA
IObjectB = 2BBB
IObjectC = 3CCC
Records from IobjectA =1AAA.
I expect the record should be like this :
IObjectA : IObjectB: IObjectC
1AAA :2BBB :3CCC
However, I am getting the record like this:
IObjectA : IObjectB: IObjectC
1AAA :2BBB :3CCC
1AAA : # :#
In the Identification section I have selected both the entries for IobjectA still I am getting this error.
My BW Version is 3.0B and the SP is 31.
Thanks in advance for your suggestion.May be I was not clear enough in my first explanation, Let me try again to explain my scenario:
My Expectation from Multi Provider is :
IObjectA
1AAA
(From InfoObject)
Union
IObjectA IObjectB IObjectC
1AAA 2BBB 3CCC
(From Cube)
The record in the multiprovider should be :
IObjectA IObjectB IObjectC
1AAA 2BBB 3CCC
Because, this is what the Union says .. and the Definition of the multiprovider also says the same thing :
http://help.sap.com/saphelp_bw30b/helpdata/EN/ad/6b023b6069d22ee10000000a11402f/frameset.htm
Do you still think this is how the behaviour of the multiprovider.. if that is the case what would be the purpose of having an infoobject in the multiprovider.
Thank you very much in advance for your responses.
Best Regards.,
Praveen.
Maybe you are looking for
-
Matrialized view not refreshing all records from source.
My materialized view is not refreshing a fixed number of rows i.e 198 every time from source to target.What are the reasons for such behavior. Also what should i do to resolve this discrepancy. My mv is a FAST REFRESH ON DEMAND based on ROWID. It has
-
Frame 10 won't open, and I can't uninstall
Suddenly, FrameMaker 10 will not open. When I try to open it, it generates a log file which says there's a stack trace error. I decided to uninstall and then reinstall. When I start the uninstaller, a message says that I must close javaw.exe to conti
-
Change 'report parameters' of scheduled report
How can I change the report parameters (not schedule parameters) programmatically and then schedule the 'modified' report immediately? Scheduling works off - Binding off InfoObjects model Modifying Parameters are based off - Binding off RAS model Sho
-
Error in OPEN_FORM for document 6000000078
Hi Guys, I'm experiencing an error : Error in OPEN_FORM for document 6000000078. This form is an enhanced form for RFQ and an enhanced print program ZSAPFM06P. What would be the possible cause of this error and how could I avoid this error? Please gu
-
When a document gets hidden behind the menu bar and you can't move it
Whe, say, a Word document opens up so it's own header is behind the Apple Finder menu bar at the very top of the screen, you can't click on the header to move it anywhere on the screen. Like it's stuck there. How Can I access documents like that? I t