Issue with the Sub Query

Hi there,
I have written a stored procedure but It was throwing an error like this
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
update FMM.DEF_BID_STATUS
set FILENAME =(select FILENAME
from FMM.DEF_BID_STATUS BS2
where SITE_ID in(select min(SITE_ID) from FMM.SITES)
and BS1.BID_STATUS_ID = BS2.BID_STATUS_ID)
FROM FMM.DEF_BID_STATUS BS1 where SITE_ID = 1
Can anyone please check what is wrong in this.
Thanks for your help

Try the below:
update FMM.DEF_BID_STATUS
set FILENAME =(selectFILENAME
from FMM.DEF_BID_STATUS BS2
where SITE_ID in(select min(SITE_ID) from FMM.SITES)
and BS1.BID_STATUS_ID = BS2.BID_STATUS_ID and BS2.SITE_ID = BS1.SITE_ID)
FROM FMM.DEF_BID_STATUS BS1 where SITE_ID = 1

Similar Messages

Performance issue with the Select query

Hi,
I have an issue with the performance with a seclet query.
In table AFRU - AUFNR is not a key field.
So i had selected the low and high values into s_reuck and used it in Where condition.
Still i have an issue with the Performance.
SELECT SINGLE RUECK
RMZHL
IEDD
AUFNR
STOKZ
STZHL
FROM AFRU INTO table t_AFRU
FOR ALL ENTRIES IN T_ZSCPRT100
WHERE RUECK IN S_RUECK AND
AUFNR = T_ZSCPRT100-AUFNR AND
STOKZ = SPACE AND
STZHL = 0.
I had also cheked by createing an index for AUFNR in the table AFRU...it does not help.
Is there anyway that we can declare Key field while declaring the Internal table....?
ANy suggestions to fix the performance issue is apprecaited!
Regards,
Kittu

Hi,
Thank you for your quick response!
Rui dantas, i have lill confusion...this is my code below :
data : t_zscprt type standard table of ty_zscprt,
 wa_zscprt type ty_zscprt.
types : BEGIN OF ty_zscprt100,
 aufnr type zscprt100-aufnr,
 posnr type zscprt100-posnr,
 ezclose type zscprt100-ezclose,
 serialnr type zscprt100-serialnr,
 lgort type zscprt100-lgort,
 END OF ty_zscprt100.
data : t_zscprt100 type standard table of ty_zscprt100,
 wa_zscprt100 type ty_zscprt100.
Types: begin of ty_afru,
 rueck type CO_RUECK,
 rmzhl type CO_RMZHL,
 iedd type RU_IEDD,
 aufnr type AUFNR,
 stokz type CO_STOKZ,
 stzhl type CO_STZHL,
 end of ty_afru.
data : t_afru type STANDARD TABLE OF ty_afru,
 WA_AFRU TYPE TY_AFRU.
SELECT AUFNR
 POSNR
 EZCLOSE
 SERIALNR
 LGORT
 FROM ZSCPRT100 INTO TABLE T_ZSCPRT100
 FOR ALL ENTRIES IN T_ZSCPRT
 WHERE AUFNR = T_ZSCPRT-PRTNUM
 AND SERIALNR IN S_SERIAL
 AND LGORT IN S_LGORT.
 IF sy-subrc <> 0.
 MESSAGE ID 'Z2' TYPE 'I' NUMBER '41'. "BDCG87
 stop."BDCG87
 ENDIF.
ENDIF.
SELECT RUECK
 RMZHL
 IEDD
 AUFNR
 STOKZ
 STZHL
 FROM AFRU INTO TABLE T_AFRU
 FOR ALL ENTRIES IN T_ZSCPRT100
 WHERE RUECK IN S_RUECK AND
 AUFNR = T_ZSCPRT100-AUFNR AND
 STOKZ = SPACE AND
 STZHL = 0.
Using AUFNR, get AUFPL from AFKO
Using AUFPL, get RUECK from AFVC
Using RUEKC, read AFRU
In other words, one select joining AFKO <-> AFVC <-> AFRU should get what you want.
This is my select query, would you want me to write another select query to meet this criteria..
From AUFNR> I will get AUFPL from AFKO> BAsed on AUFPL I will get RUECK, based on RUEKC i need to read AFRU..but i need to select few field from AFRu based on AUFNR....
ANy suggestions wil be appreciated!
Regards
Kittu

Issue with the select query

Hi,
DATA: BEGIN OF IT_MATERIAL OCCURS 0,
 IDNRK LIKE STPO-IDNRK,
 MATNR LIKE MAST-MATNR,
 END OF IT_MATERIAL.
FORM CHECK_SALESDATA_EXISTENCE .
IF NOT IT_MATERIAL[] IS INITIAL.
 LOOP AT IT_MATERIAL.
 CLEAR VBAP.
 SELECT SINGLE * FROM VBAP WHERE MATNR EQ IT_MATERIAL-MATNR.
 IF SY-SUBRC NE 0.
 DELETE IT_MATERIAL WHERE IDNRK EQ IT_MATERIAL-IDNRK
 AND MATNR EQ IT_MATERIAL-MATNR.
 ENDIF.
 CLEAR IT_MATERIAL.
 ENDLOOP.
ENDIF.
ENDFORM. " CHECK_SALESDATA_EXISTENCE
The above is the subroutine in the program which check whether sales data exists for a material or not. But the problem is the select statement which is written in the loop is taking so much of time because of this the program is going into short dump "Time Exceed Limit".
Please suggest how can i modifiy the above statemnt so that the performance of the program increases.
<REMOVED BY MODERATOR>
Thanks.
Edited by: Alvaro Tejada Galindo on Mar 4, 2008 10:37 AM

The program deletes multiple records inside a loop. This isn't good practice. The following should work:
REPORT ztest LINE-SIZE 80 MESSAGE-ID 00.
TABLES: vapma.
DATA: BEGIN OF it_material OCCURS 0,
matnr LIKE mast-matnr,
idnrk LIKE stpo-idnrk,
END OF it_material.
PERFORM check_salesdata_existence.
*& Form CHECK_SALESDATA_EXISTENCE
* text
FORM check_salesdata_existence .
DATA: delete.
SORT it_material BY matnr.
LOOP AT it_material.
 AT NEW matnr.
 SELECT SINGLE * FROM vapma
 WHERE matnr EQ it_material-matnr.
 IF sy-subrc <> 0.
 delete = 'X'.
 ELSE.
 CLEAR delete.
 ENDIF.
 ENDAT.
 IF delete = 'X'.
 DELETE it_material.
 ENDIF.
ENDLOOP.
ENDFORM. " CHECK_SALESDATA_EXISTENCE
Note that I have changed the filed order in it_material so that AT NEW will work correctly.
Rob

Re : Issue with the column display in Bex reports

Hello Gurus,
I have an issue with the reports in Bex, this is a bit confusing scenario I would try to explain in more details. A query was already built for monthly Report in Sales and Billing for which the variable were Calender month/year range 1 (mandatory), range 2 range 3 range 4. These 4 variable were created and moved to column rows in query.
Later the user wanted the copy of same report but he wanted the variables to be Calender date range 1 (mandatory), range 2, range 3 , range 4. I have created them with 0calenderday as reference and moved to the columns.
for the monthly report text variables were already existing for the Calender month/ year, but for the daily report text variable were not existing for Dates. I have created a text variable for the date in the following way processing by
" replacement path" and reference characteristic as 0calday and in the replacement path tab.. in replace variable the selection is info object, the next option Replace with " External charactersitic value key " .
By creating this text variable the dates were being displayed in the colum header like 11/01/2013 - 11/30/2013 which satisfies the requirement.
But the user wanted to see the report same like monthly report when the mandatory variable Calender year/ month is selected, the rest of the columns range 2, range 3, range 4 are displayed as unassigned in the report. but coming back to the daily report when the user is giving the Calender date rage 1, he is finding that Calender date range 2, range 3, range 4 are also being displayed with values. He want to see the Calender date range 2,3,4 as unassigned in the report just like monthly. Please find the images attached.
As Calender month/ year is predefined, if the calender range values are not given it would show up as not assigned default. I have created a separate text variable for Calender day, I believe that could be the reason rest of the columns are not showing up as unassigned. The user want to see them as unassigned like monthly report columns.
I tried different ways changing the text variables but I could not change the display of the columns in Calender date report by the option - replace with ----> External characteristic value key, key, label. when I chose the option external characteristic value then the date was showing up in the text of the column when report is run ( Please find the image for the reference in the attachment ). . I request you to help me out in this. Please find the images of the variables and output below.

Anshu,
Thank you very much for above code I made minor changes to the code that finally worked. I created 4 different text variables needed for Calender date range 1, 2 ,3 ,4. Please find the code below for the text variable that worked in the system
WHEN 'ZTEXT_CAL1'.
   READ TABLE I_T_VAR_RANGE INTO loc_var_range
   WITH KEY VNAM = 'ZCALDATE1'.
    IF loc_var_range-LOW = '#'.
      dt_low = 'Not Assigned'.
      dt_high = 'Not Assigned'.
      CONCATENATE dt_low '-' dt_high INTO l_s_range-low.
    ELSE.
      CONCATENATE loc_var_range-low+4(2) '/' loc_var_range-low+6(2) '/' loc_var_range-low+0(4) into dt_low.
      CONCATENATE loc_var_range-high+4(2) '/' loc_var_range-high+6(2) '/' loc_var_range-high+0(4) into dt_high.
      CONCATENATE dt_low '-' dt_high INTO l_s_range-low.
    ENDIF.
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.

Need some help with the Select query.

Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
        VKORG TYPE VBAK-VKORG,
        ABGRU TYPE VBAP-ABGRU,
       END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
Developer

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

Issue with condition in Query

Hi,
I have report on a cube which when execute vit all main characteristics(highest level char[plant] to lowest level[material] chars) like plant, external-material grp, material type, project-plant and material the report vil come vit correct values , wen v remove the lowest level ie., material the overall result is changing.
     There is a condition for Godown Quantity(godown qty notequalto 0)
    Because of the condition on godown qty the overall result is changing.
like:
qty 61-120amt 61-120qty >120----amt >120
10936.06-766957.91-1955762.54--725613332.2(overall-results)
when we drill down are remove drill down any characteristic then some value(6422) of amt61-120 days is shifting to amt>120days,this happening also for qty.
like:
10934.66760535.291955763.94---725619755(overall-results)
    so i removed the condition and executed the report, here wat ever char v remove and wat ever char v drill down no effect to over all result means it vil remain unchange.
   But asking for no zero values for Godown quantity.
Help me in this....
Thanks in Advance,
Chaitu.
Edited by: chaithu218 on Jun 6, 2011 5:09 PM

Hi,
user555994 wrote:
Hello Lee,
thanks for your reply.
But what is B?I think Lee meant to name the in-line view "B", like this:
SELECT b.app_req_id
FROM (SELECT   a.app_req_id,
                COUNT(*) cnt       -- or maybe COUNT (DISTINCT a.class_symbol)
       FROM     app_req a
       WHERE    a.class_symbol IN ('MBA', 'BTECH', 'BBA', 'SENIOR SECONDARY', 'SECONDARY')
       GROUP BY a.app_req_id) b     -- Alias added here
WHERE b.cnt = 5
;You don't really need either alias. In fact, you don't need the sub-query: the query below is equivalent to the one above:
SELECT    app_req_id
FROM      app_req
WHERE     class_symbol     IN ('MBA', 'BTECH', 'BBA', 'SENIOR SECONDARY', 'SECONDARY')
GROUP BY app_req_id
HAVING    COUNT (*)           -- or maybe COUNT (DISTINCT class_symbol)
                 = 5
;If the combination (app_req_id, class_symbol) is not unique, then use "COUNT (DISTINT class_symbol)" instead of "COUNT (*)".
There is only 1 table i am reffering to and need to get the ID where values matches in other column. Other column can have the values as that of MBA,BTECH,BBA,SENIOR SECONDARY and SECONDARY.
I don't want to use query as -
Select APP_REQ_ID FROM app_req where class_symbol in ('MBA', 'BTECH', 'BBA', 'SENIOR SECONDARY', 'SECONDARY')
As this will be with either of the match found. I want where all of the match found.That's what the condition "WHERE b.cnt = 5" in the main query is for.
>
Kindly help.If the query above is not doing what you want, then post a little sample data (CREATE TABLE and INSERT statements), and the results you want from that data. Point out where the query above is getting the wrong results, and explain, with spoecific examples, how to get the right results in those places.

Issue with the date format

Hi,
I have a query which uses other schema data using dblinks. I am facing performance issues with the query. I have the following condition in where clause
c.src_data_dt BETWEEN TO_DATE('01-MAR-2009 00:00:00','dd-mon-yyyy hh24:mi:ss')
AND TO_DATE('31-JUL-2009 23:59:59','dd-mon-yyyy hh24:mi:ss')
TO avoid this performance issue, I have been asked to replace that with the following..
c.src_data_dt BETWEEN '01-MAR-2009 00:00:00' AND '31-JUL-2009 23:59:59'
But if I used like this, I Am getting the following error.
ORA-01830: date format picture ends before converting entire input string.
How can I resolve this error?
Thanks
Kaliappan

kaliappan wrote:
DATEThen your original approach is the correct one.
You should ask the individual who told you to modify it for performance reasons 'why', as there will be no performance benefit from converting the DATE column into a string (which is what would have to happen if you queried the way you were told).

163; There seems to be an issue with the template that the site is using as there is a code to replace the pricing.

163;
There seems to be an issue with the template that the site is using as there is a code to replace the pricing.
<script>
// Script to extract the currency and decimals from the price
var price = "{tag_saleprice}";
var priceWithoutCurrency = price.replace( /^\D+/g, '')
var decimals = priceWithoutCurrency.substring(priceWithoutCurrency.length - 2, priceWithoutCurrency.length);
var roundedPrice = priceWithoutCurrency.substring(0, priceWithoutCurrency.length - 3);
$('.image-with-price.big span').html(roundedPrice+''+decimals+'');

Here are the screenshots for what it's worth.
Not sure why I can't post them in the original post. 
Mod edit: See [https://bugzilla.mozilla.org/show_bug.cgi?id=718813 bug 718813]
'''Again, when I set my DNS server to automatically detect the servers both problems disappear and I have no issues at all.'''
IMO opendns is either doing this on purpose (unlikely) or they're under some sort of attack/being used to attack the specific torrent sites although I'm open to other explanations. I believe using the automatic setting for DNS is using my own ISP's DNS servers (which again, work fine... but still...)
I'd rather not use Google's public DNS servers as Google is to commercial these days and I think there's potential privacy issues.
'''Again I have changed the setting for DNS servers back and forth several times to duplicate/verify the issue(s)... and the issues only happen with the opendns servers.'''

Hp Envy X2 issues with the touchpad gestures

I am experiencing some issues with the touchpad gestures after every time it wakes up. I am already update the drives posted in the hp web site, is anybody out there with the same issues?

I couldn't find any graphic drivers for that notebook, but here is an updated chipset that is available for your notebook: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-114872-1&cc=us&dlc=en&lc=en...
It was released 6 days ago, so it might enable that option for you. It can't hurt to try it out. If not, you might just have to hold out a little bit until they update the driver.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Anybody else having issues with the new 1.1??

For some reason, I have encountered two issues already.. Whenever I'm exporting my galleries as web pages, nothing happens! It creates a null folder that I specify but then doesn't export any photos or html pages.. If I delete the folder and do it again, the exact same way, for some miracle it then begins to export.. There is no logical explanation and its clear that its a bug..
Also, when exporting multiple images into CS2, that also fails for me.. It only opens up one picture and even though the others are selected, it doesn't seem to do the trick.. Its not my computer because i have a brand new quad w/ 4 gigs of memory.. I didn't encounter either of these issues with the older version..
Anybody else??

I tried both, and was successfull both times.
External Edit:
1. I selected 2 images (D200 RAW images).
2. Right clicked to get the contextual menu and selected Open with External Editor (I have my prefs set up for Photoshop).
3. Both images opened in Photoshop.
I can't image it being system specific. What camera and file type are you using?

Issues with the Surface Pro 3's pen in Photoshop CS6

I used photoshop CS6 with no problems on my old computer that was connected to a graphics tablet.
However, I recently bought a new windows computer called the Surface Pro 3. Everything works perfectly with the trackpad and touch, but I've had some issues with the Surface pen.
The pen can draw on the canvas, but whenever I click something on any of the windows with the pen, the entire application freezes and I would have to click the computer's taskbar at the bottom to unfreeze the application.
It's impossible to work like this. Is there any solution to fix this problem? It says that the version of photoshop I have is Adobe Photoshop Version: 13.1.2

If you have Photoshop CS6 version 13.1.2 which is the Subscription version of Photoshop, You shoule Isstall Photoshop CC 2014 on your surface Pro 3. It will work without problems on the surface Pro 3 and you will also have the option have the option to use Photoshop CC 2014 preference 2x UI to scale Photoshop's UI up in size on your Surface Pro 3.
If you do not have a subscription the Perpetual version of windows CS6 should be version 13.0.1.3. In that case the only way to scale Photoshop UI is to have windows do it. You would need to to update your windows 8.1 registry and add an external Photoshop manifest file in your Photoshop CS6 folder. To get the Surface Pro 3 pen to work with Photoshop you would need to install NTig pen device drivers the support the wintab APIs.
You will not be able to use Photoshop without a keyboard popping up the windows onscreen keyboard is too cumbersome. You can use a utility like Touchkey to create Overlay touch keys on Photoshop and use Photoshop without a keyboard.
The differece betweek Adobe 2XUI scaling an windows scaling ise windows scaling scalet the image areas as well as the Photoshops UI
A couple of touchkey overlat keyboards could look something like this

Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

Thanks Kelly,
The answers would be the following:
1200 cells per custom section (NEW COUNT), and up to 30 custom sections per spec.
Assuming all will be populated, and this would apply to all final material specs in the system which could be ~25% of all material specs.
The cells will be numeric, free text, drop downs, and some calculated numeric.
Are we reaching the limits for UI performance?
Thanks

Design issue with the multiprovider

Design issue with the multiprovider :
I have the following problem when using my multiprovider.
The data flow is like this. I have the info-objects IobjectA, IobjectB, IobjectCin my Cube.(Source for this data is s-systemA)
And from another s-system I am also loading the masterdata for IobjectA
Now I have created the multiprovider based on the cube and IobjectA.
However, surprisingly join in not workign in multiprovider correctly.
Scenario :
Record from the Cube.
IObjectA= 1AAA
IObjectB = 2BBB
IObjectC = 3CCC
Records from IobjectA =1AAA.
I expect the record should be like this :
IObjectA : IObjectB: IObjectC
1AAA       :2BBB       :3CCC
However, I am getting the record like this:
IObjectA : IObjectB: IObjectC
1AAA       :2BBB       :3CCC
1AAA         : #             :#
In the Identification section I have selected both the entries for IobjectA still I am getting this error.
My BW Version is 3.0B and the SP is 31.
Thanks in advance for your suggestion.

May be I was not clear enough in my first explanation, Let me try again to explain my scenario:
My Expectation from Multi Provider is :
IObjectA
1AAA
(From InfoObject)
Union
IObjectA     IObjectB     IObjectC
1AAA     2BBB     3CCC
(From Cube)
The record in the multiprovider should be :
IObjectA     IObjectB     IObjectC
1AAA     2BBB     3CCC
Because, this is what the Union says .. and the Definition of the multiprovider also says the same thing :
http://help.sap.com/saphelp_bw30b/helpdata/EN/ad/6b023b6069d22ee10000000a11402f/frameset.htm
Do you still think this is how the behaviour of the multiprovider.. if that is the case what would be the purpose of having an infoobject in the multiprovider.
Thank you very much in advance for your responses.
Best Regards.,
Praveen.

Issue with the App Store showing up blank.

Issue with the App Store, it will not let me search for new apps. The screen is blank. The update section and features section works, but it will not let me search for new apps. I have restarted my phone and no changes. The newest update to the iphones when the iphone 5 came out, i think, messed up this app. When i am looking at how to fix it, it tells me to delete it and try again, but the App store is not a deletable app. Any ideas why my App store, specifically the search section of this app doesn't work?

I suspect it is on Apple's side of things. Mine was blank too, but now it works again. Fixed itself one morning.
https://discussions.apple.com/message/19659161#19659161

Performance issues with the Vouchers index build in SES

Hi All,
We are currently performing an upgrade for: PS FSCM 9.1 to PS FSCM 9.2.
As a part of the upgrade, Client wants Oracle SES to be deployed for some modules including, Purchasing, Payables (Vouchers)
We are facing severe performance issues with the Vouchers index build. (Volume of data = approx. 8.5 million rows of data)
The index creation process runs for over 5 days.
Can you please share any information or issues that you may have faced on your project and how they were addressed?

Check the following logs for errors:
1. The message log from the process scheduler
2. search_server1-diagnostic.log in /search_server1/logs directory
If the build is getting stuck while crawling then we typically have to increase the Java Heap size for the Weblogic instance for SES>

Issue with the Sub Query

Similar Messages

Maybe you are looking for