Issues in TIME OUT for Dynamic Queues- Using IBM MQ Client

Hi
I have an issue with Dynamic queues. I am using IBM websphere as my Mesaging server and IBM MQ client. I need to send a request to a static queue and then wait for a response for a specified duration(in my case it is 100 millisecs) in the corresponding dynamic queue.But what I found out that in some cases, I got response even after 100 ms !!!! Here's my code. Is there anything wrong going on somewhere???
com.ibm.mq.jms.MQTemporaryQueue replyToQueue = com.ibm.mq.jms.MQTemporaryQueue)queueSession.createTemporaryQueue();
replyToQueue.setTargetClient(JMSC.MQJMS_CLIENT_JMS_COMPLIANT);
requestMsg.setJMSReplyTo(replyToQueue);
long t1 = System.currentTimeMillis();
queueSender.send(requestMsg);
queueReceiver = queueSession.createReceiver(replyToQueue);
queueConnection.start();
m = queueReceiver.receive(100);
long t2 = System.currentTimeMillis();
if(m != null){
System.out.println("Response Time: " + (t2 - t1) + " ms");}
I have left out the queueSession and queueSender piece of code here.
Anyways, I found 1 response in 122 ms and another in 128 ms. Can anyone throw some light as to why and how this is happening?

Don't run from the client ... run from the server
or
if running from a client use the built-in DBMS_DATAPUMP package's API.
http://www.morganslibrary.org/reference/pkgs/dbms_datapump.html

Similar Messages

Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it.
Alex D
Applications Engineer
National Instruments

Can the time out for loading a page be extended for busy sites?

(Error:)
Problem loading page
The connection has timed out
The server at xxx.xxx is taking too long to respond.
* The site could be temporarily unavailable or too busy. Try again in a few moments.
Question: Is there a way to extend the time out for sites which are known to be busy?

This issue appears under two different Mozzila "Questions". Both appear to have the same OUTDATED, INEFFECTIVE ANSWERS. A lot of us are on WIN7 now and still have erratic network speeds due to cable multiplexing -- but have been trained to leave the registry alone. Has not anyone solved this problem -- other than going notoriously unreliable FIOS ??

Transaction time out for a simple query

I have a table with 39 million records in the table. When I try to fetch data from teh table with one single where clause. it is raising Transaction timed Out.
What is the best way to fetch full data with out Time Out.
Can we use the first_rows hint to fetch data batch by batch ?
Thanks,
CD

What is the exact error code? I.e. the ORA-nnnn error code.
It is not possible to diagnose a problem if the actual problem is not known. Responders are guessing at what the problem is and offering solutions.. and these could be very far of the mark.

Set time out for single webservice in NWDS 2004s

hai,
i created webservices for session bean.created webservices are consumed by webdynpro client.
when the webdynpro client consuming it.if the response takes more than 60 sec the webservices are timed out so i want to set the time out for my webservice.
how can i set the time out (more 60 sec)for my webserive(for one service)?
thanks in advance.
Edited by: lakshman balanagu on Jun 24, 2008 11:20 AM

Hi
Try out this thing: I am not sure as I have not done this.
Go to this link: http://<server>:<j2ee port>/nwa --> System Management --> Overview --> Configuration
Application Resouce ( Select your resource from the list)
Check for "Connection Pooling".
Here you can check different options.

Is it possible to increase user exit time out for a partcular user

Dear Sir/madam,
Is it possible to increase the User Time Out for a Particular user ?
We do it through RZ10 and as per I know when it is changed, it is effected to all the users.
Pls advice.
Thanks,
Pranab

Hi Pranab,
Not possible for a single user.
Regards
Ashok Dalai

Session Time Out For UNLOGGED IN USER During Search -pls help SIR!

Hi,
The problem lies in searchresultscontroller.java/searchcontroller.java file under search/web/handler of an application that supports educational note sharing.
The problem is that -
When I search with query strings in different fields(as you will find in the above mentioned java files)..the keywords in resourcedto and get some files as search results.
Then I click on one of the file from within the search result and visit the file.
Here if I m logged in as an user, and the session time out is set to 1 minute in the web.xml file of the web folder not the admin folder then when I hit the BACK TO SEARCH button it easily goes back to the previous search result page along with the queries string that I had input previously.
The problem is that when I m NOT LOGGED in as an user, and I've performed a search with queries and other dropdowns in the search panel, I get the search result page, I visit the file by clicking on one of them but when I hit the BACK TO SEARCH button I don't see the previous search result page from where I had navigated to view the file.
Please suggest on what changes shall I make in the code so that even if I m not logged in as an user, I get back to the search result page on hitting the BACK TO SEARCH button from the file view page.Sir I m herein pasting the code of the searchresultscontroller.java file, but please feel free to ask for anyother file whose code you might want to see.SEARCHRESULTSCONTROLLER.JAVA FILE CONTENT-
package com.mgh.sps.search.web.handler;
import java.util.Map;
import java.util.regex.Pattern;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.log4j.Logger;
import org.springframework.validation.BindException;
import org.springframework.validation.Errors;
import org.springframework.web.servlet.ModelAndView;
import org.springframework.web.servlet.mvc.SimpleFormController;
import com.mgh.sps.search.business.facade.Search;
import com.mgh.sps.common.dto.ResourceDTO;
import com.mgh.sps.common.util.SessionAttributeKey;
import com.mgh.sps.common.util.SessionManager;
import com.mgh.sps.fileusage.web.constants.FileUsageWebConstants;
public class SearchResultsController extends SimpleFormController {
* SearchResults Controller
* @author Muralikrishna.s
* @Codedondate DD-MM-YY=26-07-07
* @Usecase/s associated =UC504
private static final Logger logger = Logger
.getLogger(SearchResultsController.class.getName());
private final static String REG_EXP = "^[A-Za-z0-9]*$";
private final static Pattern EMAIL_PATTERN_REG = Pattern.compile(REG_EXP);
* Spring framework method used to hold reference data
* @param request
* HttpServletRequest
* @param command
* Object
* @param arg2
* Errors
* @return Map
* @throws Exception
@Override
protected Map referenceData(HttpServletRequest request, Object command,
Errors errors) throws Exception {
logger.debug("SearchResultsController.referenceData() method entered:"
+ request + "," + command + "," + errors);
SessionManager.setSessionAttribute(SessionAttributeKey.tabIndex,
FileUsageWebConstants.TAB_SEARCH, request);
Search search = (Search) super.getWebApplicationContext().getBean(
"searchfacade");
ResourceDTO resourceDto = (ResourceDTO) command;
String[] allValues = new String[7];
if (null != (String[]) SessionManager.getSessionAttribute(
SessionAttributeKey.allValues, request)) {
allValues = (String[]) SessionManager.getSessionAttribute(
SessionAttributeKey.allValues, request);
resourceDto.setKeywords(allValues[0]);
resourceDto.setCountry(allValues[1]);
resourceDto.setUniversityName(allValues[2]);
resourceDto.setSubjectArea(allValues[3]);
resourceDto.setQualification(allValues[4]);
resourceDto.setYearLevel(allValues[5]);
resourceDto.setSpecificType(allValues[6]);
logger.debug("%%%%%%%%%%%%%%%%%qualification%%%%%%%%%%%%%%%"
+ resourceDto.getQualification());
String flag = (String) request.getParameter("id");
resourceDto.setFlag(flag);
logger.debug("SearchResultsController.referenceData() method exited:");
return search.retrieveReferenceData(resourceDto);
* Spring framework method used to hold OnSubmit
* @param request
* HttpServletRequest
* @param response
* HttpServletResponse
* @param command
* Object
* @param arg3
* BindException
* @return ModelAndView
* @throws Exception
@Override
protected ModelAndView onSubmit(HttpServletRequest request,
HttpServletResponse response, Object command, BindException errors)
throws Exception {
SessionManager.cleanup(request);
logger.debug("SearchResultsController.onSubmit() method entered:"
+ request + "," + command + "," + response + "," + errors);
Search search = (Search) super.getWebApplicationContext().getBean(
"searchfacade");
Map dynamic = (Map) getServletContext().getAttribute("config");
ResourceDTO resourceDto = (ResourceDTO) command;
SessionManager.removeSessionAttribute(SessionAttributeKey.allValues,
request);
//changed by sreelatha on sep21
//resourceDto.setKeywords(request.getParameter("keywords"));
//String key = request.getParameter("keywords");
//logger.debug("&&&&&&&&&&&&& key &&&&&&&&&&&&" + key);
String keywords = (request.getParameter("keywords"));
if(null!=keywords) {
keywords = keywords.trim();
resourceDto.setKeywords(keywords);
// changes end
resourceDto.setUniversityName(request.getParameter("universityName"));
resourceDto.setSubjectArea(request.getParameter("subjectArea"));
resourceDto.setCountry(request.getParameter("country"));
resourceDto.setQualification(request.getParameter("qualification"));
resourceDto.setYearLevel(request.getParameter("yearLevel"));
resourceDto.setSpecificType(request.getParameter("specificType"));
String[] allValues = new String[7];
//changed by sreelatha on sep21
//allValues[0] = request.getParameter("keywords");
allValues[0] = resourceDto.getKeywords();
//changes end
allValues[1] = request.getParameter("country");
allValues[2] = request.getParameter("universityName");
allValues[3] = request.getParameter("subjectArea");
allValues[4] = request.getParameter("qualification");
allValues[5] = request.getParameter("yearLevel");
allValues[6] = request.getParameter("specificType");
SessionManager.setSessionAttribute(SessionAttributeKey.allValues,
allValues, request);
if(null!=keywords) {
keywords = keywords.trim();
String words="";
for(int i=0;i<keywords.length();i++) {
String key=String.valueOf(keywords.charAt(i));
if(key.contains("*")) {
key = key.replace("*"," ");
} else if(key.contains("?")) {
key = key.replace("?"," ");
} else if(key.contains("[")) {
key = key.replace("["," ");
} else if(key.contains("{")) {
key = key.replace("{"," ");
} else if(key.contains("(")) {
key = key.replace("("," ");
} else if(key.contains(")")) {
key = key.replace(")"," ");
} else if(key.contains("+")) {
key = key.replace("+"," ");
} else if(key.contains("
key = key.replace("
} else if(key.contains(" ")) {
key = key.replace(" "," ");
} else if(key.contains("_")) {
key = key.replace("","");
} else if(!EMAIL_PATTERN_REG.matcher(key).matches()) {
key = key.replaceAll(key," ");
words = words + key;
keywords = words;
resourceDto.setKeywords(keywords);
SessionManager.setSessionAttribute(SessionAttributeKey.test, search.setInputValues(resourceDto, dynamic), request);
String name = (String) SessionManager.getSessionAttribute(SessionAttributeKey.tempName, request);
String flag1 = request.getParameter("id");
String status="";
if (flag1 !=null && flag1.equals("loggedInUser"))
if(name==null)
return new ModelAndView();
if (flag1 !=null && flag1.equals("loggedInUser")){
status = "redirect:SearchResults.htm?id=loggedInUser";
}else if(flag1 !=null && flag1.equals("nonLoggedInUser"))
status = "redirect:SearchResultsnlu.htm?id=nonLoggedInUser";
super.setSuccessView(status);
ModelAndView mav = new ModelAndView(super.getSuccessView());
logger.debug("SearchResultsController.onSubmit() method exited:");
return mav;
}

Cross-posted in many forums. Don't answer this one.

Session Time Out For UNLOGGED USER During Search -pls help

Hi,
The problem lies in searchresultscontroller.java/searchcontroller.java file under search/web/handler of an application that supports educational note sharing.
The problem is that -
When I search with query strings in different fields(as you will find in the above mentioned java files)..the keywords in resourcedto and get some files as search results.
Then I click on one of the file from within the search result and visit the file.
Here if I m logged in as an user, and the session time out is set to 1 minute in the web.xml file of the web folder not the admin folder then when I hit the BACK TO SEARCH button it easily goes back to the previous search result page along with the queries string that I had input previously.
The problem is that when I m NOT LOGGED in as an user, and I've performed a search with queries and other dropdowns in the search panel, I get the search result page, I visit the file by clicking on one of them but when I hit the BACK TO SEARCH button I don't see the previous search result page from where I had navigated to view the file.
Please suggest on what changes shall I make in the code so that even if I m not logged in as an user, I get back to the search result page on hitting the BACK TO SEARCH button from the file view page.Sir I m herein pasting the code of the searchresultscontroller.java file, but please feel free to ask for anyother file whose code you might want to see.
SEARCHRESULTSCONTROLLER.JAVA FILE CONTENT-
package com.mgh.sps.search.web.handler;
import java.util.Map;
import java.util.regex.Pattern;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.log4j.Logger;
import org.springframework.validation.BindException;
import org.springframework.validation.Errors;
import org.springframework.web.servlet.ModelAndView;
import org.springframework.web.servlet.mvc.SimpleFormController;
import com.mgh.sps.search.business.facade.Search;
import com.mgh.sps.common.dto.ResourceDTO;
import com.mgh.sps.common.util.SessionAttributeKey;
import com.mgh.sps.common.util.SessionManager;
import com.mgh.sps.fileusage.web.constants.FileUsageWebConstants;
public class SearchResultsController extends SimpleFormController {
     * SearchResults Controller
     * @author Muralikrishna.s
     * @Codedondate DD-MM-YY=26-07-07
     * @Usecase/s associated =UC504
     private static final Logger logger = Logger
               .getLogger(SearchResultsController.class.getName());
     private final static String REG_EXP = "^[A-Za-z0-9]*$";
     private final static Pattern EMAIL_PATTERN_REG = Pattern.compile(REG_EXP);
     * Spring framework method used to hold reference data
     * @param request
     * HttpServletRequest
     * @param command
     * Object
     * @param arg2
     * Errors
     * @return Map
     * @throws Exception
     @Override
     protected Map referenceData(HttpServletRequest request, Object command,
               Errors errors) throws Exception {
          logger.debug("SearchResultsController.referenceData() method entered:"
                    + request + "," + command + "," + errors);
          SessionManager.setSessionAttribute(SessionAttributeKey.tabIndex,
                    FileUsageWebConstants.TAB_SEARCH, request);
          Search search = (Search) super.getWebApplicationContext().getBean(
                    "searchfacade");
          ResourceDTO resourceDto = (ResourceDTO) command;
          String[] allValues = new String[7];
          if (null != (String[]) SessionManager.getSessionAttribute(
                    SessionAttributeKey.allValues, request)) {
               allValues = (String[]) SessionManager.getSessionAttribute(
                         SessionAttributeKey.allValues, request);
               resourceDto.setKeywords(allValues[0]);
               resourceDto.setCountry(allValues[1]);
               resourceDto.setUniversityName(allValues[2]);
               resourceDto.setSubjectArea(allValues[3]);
               resourceDto.setQualification(allValues[4]);
               resourceDto.setYearLevel(allValues[5]);
               resourceDto.setSpecificType(allValues[6]);
          logger.debug("%%%%%%%%%%%%%%%%%qualification%%%%%%%%%%%%%%%"
                    + resourceDto.getQualification());
          String flag = (String) request.getParameter("id");
          resourceDto.setFlag(flag);
          logger.debug("SearchResultsController.referenceData() method exited:");
          return search.retrieveReferenceData(resourceDto);
     * Spring framework method used to hold OnSubmit
     * @param request
     * HttpServletRequest
     * @param response
     * HttpServletResponse
     * @param command
     * Object
     * @param arg3
     * BindException
     * @return ModelAndView
     * @throws Exception
     @Override
     protected ModelAndView onSubmit(HttpServletRequest request,
               HttpServletResponse response, Object command, BindException errors)
               throws Exception {
          SessionManager.cleanup(request);
          logger.debug("SearchResultsController.onSubmit() method entered:"
                    + request + "," + command + "," + response + "," + errors);
          Search search = (Search) super.getWebApplicationContext().getBean(
                    "searchfacade");
          Map dynamic = (Map) getServletContext().getAttribute("config");
          ResourceDTO resourceDto = (ResourceDTO) command;
          SessionManager.removeSessionAttribute(SessionAttributeKey.allValues,
                    request);
          //changed by sreelatha on sep21
          //resourceDto.setKeywords(request.getParameter("keywords"));
          //String key = request.getParameter("keywords");
          //logger.debug("&&&&&&&&&&&&& key &&&&&&&&&&&&" + key);
          String keywords = (request.getParameter("keywords"));
          if(null!=keywords) {
               keywords = keywords.trim();
          resourceDto.setKeywords(keywords);
//          changes end
          resourceDto.setUniversityName(request.getParameter("universityName"));
          resourceDto.setSubjectArea(request.getParameter("subjectArea"));
          resourceDto.setCountry(request.getParameter("country"));
          resourceDto.setQualification(request.getParameter("qualification"));
          resourceDto.setYearLevel(request.getParameter("yearLevel"));
          resourceDto.setSpecificType(request.getParameter("specificType"));
          String[] allValues = new String[7];
          //changed by sreelatha on sep21
          //allValues[0] = request.getParameter("keywords");
          allValues[0] = resourceDto.getKeywords();
          //changes end
          allValues[1] = request.getParameter("country");
          allValues[2] = request.getParameter("universityName");
          allValues[3] = request.getParameter("subjectArea");
          allValues[4] = request.getParameter("qualification");
          allValues[5] = request.getParameter("yearLevel");
          allValues[6] = request.getParameter("specificType");
          SessionManager.setSessionAttribute(SessionAttributeKey.allValues,
                    allValues, request);
               if(null!=keywords) {
               keywords = keywords.trim();
               String words="";
               for(int i=0;i<keywords.length();i++) {
                    String key=String.valueOf(keywords.charAt(i));
                    if(key.contains("*")) {
                              key = key.replace("*"," ");
                         } else if(key.contains("?")) {
                              key = key.replace("?"," ");
                         } else if(key.contains("[")) {
                              key = key.replace("["," ");
                         } else if(key.contains("{")) {
                              key = key.replace("{"," ");
                         } else if(key.contains("(")) {
                              key = key.replace("("," ");
                         } else if(key.contains(")")) {
                              key = key.replace(")"," ");
                         } else if(key.contains("+")) {
                              key = key.replace("+"," ");
                         } else if(key.contains("\\")) {
                              key = key.replace("\\"," ");
                         } else if(key.contains(" ")) {
                              key = key.replace(" "," ");
                         } else if(key.contains("_")) {
                              key = key.replace("_","_");
                         } else if(!EMAIL_PATTERN_REG.matcher(key).matches()) {
                              key = key.replaceAll(key," ");
                    words = words + key;
               keywords = words;
               resourceDto.setKeywords(keywords);
          SessionManager.setSessionAttribute(SessionAttributeKey.test, search.setInputValues(resourceDto, dynamic), request);
          String name = (String) SessionManager.getSessionAttribute(SessionAttributeKey.tempName, request);
          String flag1 = request.getParameter("id");
          String status="";
          if (flag1 !=null && flag1.equals("loggedInUser"))
          if(name==null)
                    return new ModelAndView();
          if (flag1 !=null && flag1.equals("loggedInUser")){
               status = "redirect:SearchResults.htm?id=loggedInUser";
          }else if(flag1 !=null && flag1.equals("nonLoggedInUser"))
               status = "redirect:SearchResultsnlu.htm?id=nonLoggedInUser";
          super.setSuccessView(status);
          ModelAndView mav = new ModelAndView(super.getSuccessView());
          logger.debug("SearchResultsController.onSubmit() method exited:");
          return mav;
}

Cross-posted in many forums. Don't answer this one.

How to Increase Time-out for Agent Manager in OLT?

Hello All,
When using the Oracle Load Testing Agent Manager for a load test of multiple scripts, I often get time-outs at the start of a test from OLT:
"Error communicating with.... : timed out after 60 seconds".
When I check the agentmanager.log file on the remote PC (Win XP SP2) I can see that the communcation started with the last line saying
"connected to server=......yaddayadda.... queue=queue/AgentPoolNotificationQueue"
which I assume means there was communication. And there were 2 attempts to start. After the first attempt, the entry:
05:31:09,513 WARN [AgentProcess] Forcibly terminating process 8041484 for agent agId1530_rndd49ae6b9-a8ec-4a0d-920d-16ee6c7021f4
The agentmanager_auth.log file show 2 lines near the start time of the test:
2010-05-12 05:30:18,606 INFO [URL:t3://..........au:8088;Requestor Username: oats;Requestor Key:f6272e33-9428-425b-b52d-c0363f863e43;Requestor Queue:queue/AgentPoolNotificationQueue;Request ID:36;Request:startagent;] - authentication successful
2010-05-12 05:31:09,513 INFO [URL:t3://..........au:8088;Requestor Username: oats;Requestor Key:f6272e33-9428-425b-b52d-c0363f863e43;Requestor Queue:queue/AgentPoolNotificationQueue;Request ID:42;Request:stopagent;] - authentication successful
Why was there a 'stopagent'?
The log from a successful agent show lines after the "Connected to server...." line ( "startAgent( pathTo.....a.. Launching agent.... Launched process 8792944 for agaent agId.....") so something appears to have not happened on the failed agents.
When starting a test immediately (rather than scheduling it as I want to for off-peak times) and the agents time out, I can stop it & restart test. Usually then they all start successfully.
Does anyone have any suggestions on failure reasons & possible solutions?
If there's nothing else that I might have missed, I'd like to trying increasing the time-out to say 120 or 500 seconds.
How can I do this?
Is there a way to get the agents to try starting again, or add a new vUser/script instance one the test is running?
Many thanks,
Neil
Edited by: Neil S on May 12, 2010 9:16 AM

Hi Ramesh,
I guess you need to increase the parameter "icm/keep_alive_timeout" value, it's default value is 60. please gothrough the link
http://help.sap.com/saphelp_webas630/helpdata/en/0b/1c7e7abbc311d5993a00508b6b8b11/content.htm
To increase this go to RZ10 and add this parameter in Instance profile and modify the value then restart the server to make the changes effective.
Regards,
Hari
PS: Point's are welcome

Changing time-out for scheduled data refresh

Using a Power Query connection, is it possible to extend the time-out time for scheduled data refreshes? The amount of data to be retrieved is rather limited, but there's thousands of rows (NAV server).
If not, any suggestions to how to reduce latency?
Thanks.

Thorm,
Is this still an issue?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Dequeue element times out even when queue element has new data

Hi,
I am using a producer/consumer set up and I am only getting one-iteration from my consumer loop. I have probed the cluster wire that feeds the enqueue element of the producer and there is a continuous data stream there. I have a timeout wired to the dequeue element in the consumer loop and have tried different times from 1ms to 1000ms. It is currently at 25ms. There has to be something else that is causing this issue, but I am overlooking it.
I also tried adding an event handler that would detect a value change in the data. That didn't do anything. I have tried to restart my machine to no avail. I am about to shut down and take the battery out of my laptop and reboot (the act of a man out of options).
If anyone could help, I would be indebted.
P Gnu
If you want to increase your success rate, double your failure rate.
Solved!
Go to Solution.
Attachments:
Dequeue Waiting.vi ‏139 KB

Thanks Javed_H
I thought that I tried that, but either I didn't or I did it while there was another bug. At any rate, the time-out on the event handler did fix it. I appreciate your help.
The reason I am using an event handler rather than a local variable is because I have been told many, many times that the local variable is somewhat of a hack. They gave me other reasons, although they escape me now. I do recognize and agree, however, that the local variable would work. I'm letting the design asthetics of others dictate my code.
Thank you for your input,
P Gnu
If you want to increase your success rate, double your failure rate.

OpenScript- assertAttribute method never times out for DOMObject (web test)

Hi all,
Whenever I have an assertAttribute test on a web.button, web.link, web.textBox, any specific object type, the test works as expected, and fails as expected when the object isn't available...
However, when I'm trying to do a similar test on a div element, I have tried both DOMObject and DOMElement (web.element and web.object), and in either case, if the object doesn't exist when the test gets there, the assertAttribute call will just hang FOREVER, even though the global timeout value is set to 5 seconds. :-\ Two examples:
For a button, this will time out in 5 seconds and fail the test if the button isn't available:
web.button("{{obj.Navigation.btnSearch}}").assertAttribute("Button text", "value", "Search", TestOperator.StringExact);
But for a div, this will just wait forever:
web.object("{{obj.Navigation.lblWelcome}}").assertAttribute("Welcome message", "innerText", "Welcome {{username}}", TestOperator.StringExact);
Any ideas? I can work-around by testing if it's existing first, then calling assertAttribute next, but to me, it feels like a minor bug in OpenScript on these object types...
-Troy

I commented out the export line (I don't have CS3, only an old version of CS) and it seems to work fine. the problem, then, is with the export line, and (at a guess) the issue might be the odd way you've specified the document. instead of using the export command in a document tell block, try 'export current document in live_folder as...' and see if that helps.

Exchange 2013 issue / OWA time-out and WiFi/Cell problem.

Hi everybody,
I'm having some issues with an Exchange 2013 server.
When some users try to logon to the OWA page it keeps loading the page and ends with a time-out.
This only applies to 6 or 7 users, other users can login and open the page.
I tried to replace the signed certificate to solve this problem, and did a online analyzer check, most tests come out good.
I can't seem to find the source of this problem.
There are also multiple users that are having trouble to receive e-mail through the wifi on phones and tablets at home but when they switch to 3g it works fine.
You might need more information, just ask.. i don't know where to search anymore.
I tried inheritance on the AD, disabled SSL in the IIS, restarted the server, replaced the signed cert. etc.
Update:
I set the selfsigned cert in the IIS default web page,, to check if it responds to the certificate and it does, so the issue doesn't come from the certificate.
This issue probably came up after CU1, and i've read something about healthboxes..
I'm going to install CU6 and hope for good result.
Kind regards,
Tim

I've installed CU6, only one of the six users have gained access to OWA or ECP.
Al the other users won't get a logon screen, just a blank page.
So there is no option to insert a username or password to login, the page keeps loading and ends with "the page cannot be displayed"
But on my working spot i can open owa or ecp without any issues.
I've recreated the virtual directory for ECP and OWA with powershell, and checked the certificate.
I checked if the same certificate was connected to the back-end port 444, and this is set correct.
I even reconnected the cert on 444 with the following.
Open the Command Prompt
Run-
netsh http show sslcert
This will show the certs, copy and paste this information into notepad. Under IP:port : 127.0.0.1:443, note the certificate hash and application ID.
Run this command- (Yes, I know there is no :444 listed in the output from the earlier command.)
netsh http delete sslcert ipport=0.0.0.0:444
Run this command. Replace certhas with the certificate hash and appid with the application ID you saved in notepad.
netsh http add sslcert ipport=0.0.0.0:444 certhash=123123123123123 appid="{123123123123-1231231235}"
I used powershell to set the login authentication,
et-Owavirtualdirectory -identity "YourMailBoxServerName\owa (Exchange Back End)" -WindowsAuthentication $True -Basicauthentication $false -Formsauthentication $false
set-Owavirtualdirectory -identity "YourCASserverName\owa (Default Web Site)" -WindowsAuthentication $True -Basicauthentication $false -Formsauthentication $false
and iisreset /noforce
I unchecked the "require SSL" on the default website and left it enabled on the owa and ecp etc.
Checked if HTTP over Proxy is installed, but this one is need to install exchange 2013.
I've checked all ECP/OWA directories in in the IIS, the directories point to the Exchange V15 folders, this should be correct.
Something is really broken, i really can use the help..
I'm going to try to install Exchange 2013 SP1, but i don't know if this one is needed when CU6 has been installed.
The strange thing is, it seem to be location based, not user based.
I can login perfectly, but when i try this at one of the employees, it ends up blank.
When i try to connect on a location dat does not work, at the exact time i press the enter-key to open the page, the eventviewer logs the following:
Event 4634 - An account was logged off.
For the issue on the smartphones and tablets, everything worked fine a few months ago, and happens to users on different ISP connections.
I already checked the inheritance settings on the users in the AD.
Kind regards,
Tim

ISupplier Time out for larger PO's

Hi ,
Isupplier page is getting timed for larger PO's.
We the user clicks the print PO button,it submits a program which takes more than 10Mins of time to complete but the isuuplier page times out after 5 Mins of time.
We also tried increasing the timeout values in httpd.conf and httpds.conf files but still the issue persists.
Kindly provide your inputs to resolve the issue.
Regards
Shankar

Please post the details of the application release, database version and OS.
ANS:ARM PO Print Archive Report which takes 1 min for smaller PO's and for larger
Is this a custom report or seeded one? What is the short name of this CP?
ANS : This error we are getting before the program completes (ie After 5 Mins)
Proxy Error:
Proxy server received an invalid response from the upstream server.
could not find the file in $APPLCUST_TOP/poarm/xxfilename.out.
What is the type of the report?
If this is a custom report, do you use/generate xxfilename.out file?
Can you find any errors in Apache log files?
Ans: No Error message is reported in the alert log.
What about Apache log files?
Will post the same shortly.
OK.
No error in the request log file
How do you get the error (Proxy Error) then?
Thanks,
Hussein

Time Out for a syncronus BPEL process

Hi All,
Need your help with regards to the following:
From a parent BPEL process we need to invoke a synchronous BPEL Process .This(child) could take anything between 20-30 seconds for processing a request.
Now the requirement is to time out the parent BPEL process if the BPEL process it is calling takes more than 25 seconds for processing a request.
If( time taken to get from partner process >25 sec)
time out
Else
Move along with the rest of the process.
Approaches considered:
1) Pick activity :
Fallout: the pick activity would work only when you are calling a asynchronous BPEL process.
2) Having the invoke activity in a scope and adding an on Alarm branch for the scope.
Fallout: The BPEL process manager executes all the other activities even after exceeding the maximum time the process is set for timing out.
That is if we consider the below scenario
If( time taken to get from partner process >25 sec)
time out
Else
move along with the rest of the process.
Instead of executing the if block( onAlarm) it is executing the else block.
Request you to suggests approaches to suffice this requirement.

Hi Sai Madalli,
An approach to it, would be use the syncMaxWaitTime with time that you need, its a configuration per domain.
http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/events.htm#BABGGADB
http://download-east.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/app_trblshoot.htm
Regards

Issues in TIME OUT for Dynamic Queues- Using IBM MQ Client

Similar Messages

Maybe you are looking for