Issues on the Lumia 800 with "WIFI" and "Mobile ne...

I keep my Lumia 800 on 2G/E at all times usually to conserve battery life, and because i'm at work with a wifi connection all day..occasionally when i go out i like to turn on the 3G and use the map functions etc.
The problem occurs after a while that i notice the 3G draining my battery quite quickly, so i decide i want to turn off the 3G, i go to the "Mobile network" entry under "settings" and when i tap it, nothing happens at all, i also notice my WIFI is turned off, so i tap the "WIFI" entry, and again nothing happens!
So, to solve this problem i have to turn the phone off...but then it takes maybe 10 mins or so till i can turn it back on, it will not turn on straight away!! I have to either wait ten mins or keep pressing the power button and holding it down untilt he phone eventually vibrates to tell me its turning on..whats going on??
If anyone can shed some light on this matter i'd be very grateful!

This is still happening, can anyone shed some light on this?

Similar Messages

  • Where is the Lumia 800 wifi tethering?

    Hello
    About two months ago, there was a lot of buzz on the net about "lumia 800 gets wifi tethering in the next update"
    Well... Am I missing something important on my phone or is the wifi tethering still not there?  I could use it, especially since Joikuspot is not available for this phone.
    Thanks
    Dieter

    I keep asking the same question and never get an answer from Nokia, I cannot believe they do not know this. I purchased this phone after being told it was already available by the salesman. I purchased this on a higher contract so that I could get rid of my mobile dongle. I am now paying for both each month. This has really put me off Nokia, jut wish I was wasn't stuck with it for an 18 month contract.

  • It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?

    It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?
    I was using "remote" with a D-link modem, that works fine at my iPad. But now I´m using only the cell phone as modem 3G, and don´t want to intall a router to put new cables at my notebook.

    What?
    You want to control iTunes on your computer using the Remote app on your iPad?
    And you want to connect the iPad and computer through your Nokia?
    No, this will not work.
    Just create a network with your notebook.

  • Can I get an Ipad with wifi and cellular but no contract with a carrier in the US?  I want to use it overseas in Africa with a local SIM card and use the cellular signal for all my internet.

    Can I get an Ipad with wifi and cellular but no contract with a carrier in the US?  I want to use it overseas in Africa with a local SIM card and use the cellular signal for all my internet. 

    Yes you can.  All Ipad's are unlocked and can be used any where in the world. Buy the AT&T version which is GSM in other countries

  • Frustratingly, since I upgraded to Yosemite 10.10, I too am having the worst problems with WiFi dropping out. I've never had this problem before on my iMac 27-inch mid 2011 model. Turning WiFi off and then back on again sometimes works. Help please.

    Frustratingly, since I upgraded to Yosemite 10.10, I too am having the worst problems with WiFi dropping out. I've never had this problem before on my iMac 27-inch mid 2011 model. Turning WiFi off and then back on again sometimes works. Help please. I've already tried a lot of your suggested fixes, but without success. Why hasn't Apple Fixed this?

    Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
    Step 1
    Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Step 2
    Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
    Step 3
    If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
    Step 4
    Open the Energy Saver pane in System Preferences and unlock the settings, if necessary. Select the Power Adapter  tab, if there is one. Uncheck the box marked
              Wake for Wi-Fi network access
    if it's checked.
    Step 5
    Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
    Step 6
    In the Wi-Fi settings, select
              Advanced... ▹ TCP/IP ▹ Configure IPv6: Link-local
    Click OK and then Apply.
    Step 7
    Reset the System Management Controller.
    Step 8
    Reset the PRAM.
    Step 9
    Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
    Step 10
    Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

  • Face time with wifi only.  I have a 4Gs iPhone traveling to Japan.  Can I use face time with another 4Gs or IMacback in the States using just wifi and with I have my Celluar Data and Data Roaming off?

    Face time with wifi only.  I have a 4Gs iPhone traveling to Japan.  Can I use face time with another 4Gs or IMacback in the States using just wifi and with I have my Celluar Data and Data Roaming off?

    Thanks,  After changing my settings in face time per your suggestion, (it needed to be done),  I turned off cellular data and data roaming and made a call using face time.  It worked!  Great way to stay in touch while overseas without the need for those egregious phone data plans. 

  • Hello community I have a big problem with my iphone 4s as precent problem with wifi and ios7. my phone was a champ when actualize this, eh degrade searched everything but I can not because I get the error 3194. I want a solution please

    Hello community I have a big problem with my iphone 4s as precent problem with wifi and ios7. my phone was a champ when actualize this, eh degrade searched everything but I can not because I get the error 3194. I want a solution please

    This support document http://support.apple.com/kb/ts4451 relates to the 3194 error. Generally this error has to do with trying to install an iOS that is not the most current. Maybe you tried to jailbreak the phone, or downgrade iOS? Any of this apply to you?

  • Whats the diffrence between the ipad with wifi and ipad with wifi and cellular

    whats the diffrence between the ipad with wifi and the ipad with wifi and cellular

    Johnathan Burger wrote:
    One has wifi only, the other has wifi and cellular.

  • When do I know if my iphone will switch to wifi and not that it costs some money to my phone network operator? is there a spec setting I must do. Or is it enough to have the phone set to wifi and phone connects directly when it makes contact with a wifi n

    When do I know if my iphone will switch to wifi and not that it costs somemoney to my phone network operator? is there a spec setting I must do.
    Or is it enough to have the phone set to wifi and phone connects directlywhen it makes contact with a wifi network?

    Thank you again for all of your help!! I really appreciate it!
    I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
    Thank you for letting me know about my contacts! How do I know if I have the contacts app?
    Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
    How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
    Sync Contacts:
    Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
    Sync Calendars:
    Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone

  • HT201407 Updated my iphone 3gs to ios 6.0.1. Receive message "your iphone could not be activated because the activation server is temporarily unavailable". The phone could not read my Roger iccid. I tried with wifi and itune. Could not access restore on i

    I can not activate my iphone 3gs after updating to ios 6.0.01. I tried connecting to the activating server by wifi and itune. Keep getting the same message"your iphone could not be activated because the activiation server is temporary unavailable". It could not read my Rogers iccid. I try to restore my phone on itune but it does not have the "restore" icon. Please help.

    bladetibi wrote:
    the same problem i have to......i have to go to my operator to solve my problem????and then i will be able to activate my iphone ???and have service????thx
    See your Other Post on this Topic...
    https://discussions.apple.com/message/20817908#20817908

  • To clarify: does the Lumia 800 update fix the batt...

    Hi all
    First time poster. I've been reading these boards for a week now trying to figure out, from the various posts and their many sub-pages, whether this update is
    a) available (UK)
    b) effective
    My wife and I both like the Lumia 800 but are put off by the very concerning battery and sound issues. We are happy to get one provided we can be sure the recent fix is precisely that. We were looking at O2; has anyone on O2 got the update yet, and what are your findings?
    Thanks in advance for any help 
    p.s. another option is to wait for the 900, but from what I've read the UK release date is simply stated as Q2. Is that the latest? 

    Well I'm on Vodafone UK; 12070 update appears to have significantly improved mattersfor me.. These days I ignore the 'estimated time remaining' figure, as it seems to be based on tour usage in an unspecified previous period so now merely provides mild interest. However the 'remaining battery life' definitely reduces noticeably more slowly.
    Usage-wise, I use functions as I need them.. I don't need 24/7 web connection so turn Cellular or Wifi on as and when. While I'll turn Cellular off asap, I'll often leave Wifi on if I'm not leaving the zone. The phone is almost always turned on; I've never yet used flight mode. Listen to music in the car, but often hook up to a charger while doing this, as I would with any mobile.
    I might charge every day, sometimes every couple of days.Depends how much I've been doing.
    To put it in context, my netbook (Wifi always on) battery lasts 45 MINUTES  if I'm lucky!
    I like it, anyway.. 12070 has definitely enhanced my experience :-)
    I also got the latest version of Drive, and while I still don't really 'do' satnav it seems to be improving by degrees. Satnav regulars have other threads going on that one I think.

  • Windows 7-8.1 Can not change the MAC Address on wifi and cannot load login page in public HotSpot.

    Windows 7-8.1 Can not change the MAC Address on wifi and cannot load login page in public HotSpot.
    Adapter: Ralink RT3070 Chipset wifi adapter
    Tested: os Windows 8.1 Professional
    Hot Spot: 802.11b
    The first problem windows 7-8.1 got IP adress and connect he public HotSpot  but  cannot load login page or any other page. It does not work with it.
    The second problem Wifi canrd/configure/Advandes (No network adress change function).Tested with the default windows driver and the ralink rt 3070 driver the same problem.On windows XP the same function the same driver works perfectly.
    multiple users to have expressed interest in the problem But Microsoft not corrected the problem window7-8.1 10?
    lizardsystems.com/wiki/change_mac_address/faq/change_mac_address_in_windows_7
    blog.technitium.com/2011/05/tmac-issue-with-wireless-network.html
    superuser.com/questions/519189/how-to-change-the-mac-address-in-win-8-to-spoof-a-roku-player-through-a-wifi-spl
    social.technet.microsoft.com/Forums/windows/en-US/59e07df3-471c-499e-ad5f-e7cb507595df/cannot-change-mac-address-in-windows-7-driver-has-option-doesnt-work-neither-does-regedit-ms?forum=w7itpronetworking
    networksteve.com/windows/topic.php/CANNOT_CHANGE_WIRELESS_%28SPOOF%29_MAC_ADDRESS_ON_WINDOWS_7/?TopicId=16810&Posts=1
    On windows XP or linux have a MAC adress Change function  allow 00 mac adress and another normal mac adress range.On windows 8.1 all Mac changer program dont work.This 2,6,A,E on second adress are not vaild Mac adress. You simply can not use normal MAC
    addresses on windows 8.1.When i connect the usb the Pc windows 8.1 recognizes the adapter but the default  driver and the downloaded ralink driver the same problem.On windows xp the current driver works perfectly have (Local Mac Network Adress) funktion
    and works with the 802.11b hot spot.I got the internet my PC and laptop too public HotSpots and another wifi HotSpots if wont work correctly i can not use neither the windows 7,8,8.1 or 10. Many users have expressed interest in the problem more forums.
    The 3. problem im tested in virtualbox the windows 7 and 8.1 on 8.1 (on the blue wifi platform) not show correctly the signal strengh. On windows 7 show this correctly.The windows 7-8.1 Configure/advanced the advanced options on Ralink 3070 the default (windows
    driver) somehow downgraded function is less than for Xp. Configure/advanced the advanced options (needs to be upgraded in the future) because it does not advance but rather regressed.
    Today it is very common these wi-fi technology increasingly used (hotels,Public Hots Spots,Internet coffe,) growing free bublic wifi projects. The wifi funktions on windows  need debugging and modernize.The quality of Wi-Fi is now the operating system
    is now a thing order which is not good then the operating system is unusable.

    Hi,
    For changing the MAC address for Windows 7 is designed with some limitation, we cannot get over it. Thanks for your understanding.
    Under Windows 7, the possible range of spoofed addresses for wireless adapters that can be set is limited.  To be used by Windows 7, a spoofed MAC address should have 0 as a least significant bit (unicast) and 1 as a second least significant
    bit (locally administered) in the second nibble.  Thus possible values for the second nibble are limited to 2, 6, A and E.
    In other words 
    MAC address:  “XY-XX-XX-XX-XX-XX” “X” can be anything hexadecimal.  The hexadecimal “Y”, written in binary format, is  Y:  “kmnp”,  where “p” is the least significant bit; 
    p=0 --> unicast;
    p=1 --> multicast;
    n=0 --> globally assigned MAC;
    n=1 --> locally administered;
    So, actually MAC can be changed  to any combination in which p=0 and n=1;
    “Y” can be 2, 6, A or E.
    So the possible MAC addresses in Windows 7 for wireless adapters:
    X2-XX-XX-XX-XX-XX
    X6-XX-XX-XX-XX-XX
    XA-XX-XX-XX-XX-XX
    XE-XX-XX-XX-XX-XX
    For the wifi hotspot issue, please check this blog to see if it can be helpful.
    Windows 7 Connectivity Problems in Public Hotspots
    http://blogs.technet.com/b/patrickr/archive/2010/07/28/windows-7-connectivity-problems-in-public-hotspots.aspx
    Kate Li
    TechNet Community Support

  • My new Nokia Lumia 800 changes date and time after...

    When i switch off and on my Nokia Lumia 800, date and time changes: from 2 september 2012 8.00 to 2 march 2013 14.00. I need help to understand this strange problem and find a solution.

    chrysale wrote:
    I had the same problem with my Lumia 800. The Lumia 800 kept changing time and date as soon as I switched it off and turned it back on. In my case, doing a HARD RESET helped to fix this. BEWARE! You will lose all your data!
    Switch off your phone, hold Volume Down, Power, Camera buttons down. Switch phone on. As soon as it vibrates, release Power button, keep Volume Down and Camera button pressed for a few seconds.
    I have the same problem and after going through all the various support sites- Nokia, O2, and endless forums I was told the same thing "Make sure your auto-update for date and time is switched to automatic" But after telling them I don't know how many times that my Lumia 800 didn't have this option, only a 24 hours switch I was told there was nothing that could be done. However I appear to have sorted it out myself. The problem appears to be (or on my phone at least) is wi-fi connection, before I turn my phone off I have to disconnect from wi-fi and when I turn the phone back on the date and time stays corrected.
      When I set the date and time manually (for the 3000th time!!) I held in the power button until the slide down close screen disappeared then released it and the phone restarts, then I done it again- same proceedure just to be sure and ever since the date and time has stayed correct. BUT BE SURE TO TURN OFF WI-FI BEFORE SWITCHING PHONE OFF. Hope this helps

  • Hebrew on the Lumia 800

    Hi,
    I live in Israel and considering to purchase the Lumia 800.
    I know it does not have support for writing it Hebrew, but my question is wether or not it can display hebrew in incoming SMS and Emails.
    I am looking for someone with the Lumio 800 who will be willing to help me out --  I would want to send you an SMS and Email and Hebrew and see if it works.
    If you are willing to help please reply this threat or message me privately.
    MANY THANKS!
    Thomas

    I send phones to israel have 1 in jerusleam. Im sure it suports recieving hebrew im on [email protected]

  • I've been having trouble with in getting iMessage to send messages. I decided to connect to my VPN (along with wifi) and it worked. Why won't it work via my wifi connection alone?

    I've been having trouble with in getting iMessage to send messages. I decided to connect to my VPN (along with wifi) and it worked. Why won't it work via my wifi connection alone?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

Maybe you are looking for

  • How do i print from internet in black ink only with my mac osx 10.5 using hp 6510 all in one

    i can not get my IMAC OS X 10.5 to print only black ink from the internet, using my new HP 6510 all in one printer.  HELP This question was solved. View Solution.

  • No HDMI output after driver updates

    I have for almost a year succesfully been using my micro HDMI port on my Lenovo Yoga 2 Pro for watching movies via my projector. Today, Driver Booster suggested I update 10 drivers that were outdated. So I did. It included some Intel(R) Dynamic Platf

  • Report conversion from 8.5 to 11

    <p>Is there a procedure to convert reports written in 8.5 to 11?</p><p>Please let me know</p><p>P.S. We are on SQL Server 2000 and all the reports are based on the stored procedures.</p><p>Alex</p>

  • Same Artist Name Displayed Twice In iPod Menu.

    Lately if I put 1 or 2 songs in my itunes by the same artist but it's not bought off itunes the artist name will show up twice on my ipod. I have the latest itunes and everything is spelled correctly. PLEASE HELP!

  • Itunes crashes as soon as I attempt to purchase a song.

    Hello, Eversince the day before yesterday, every time I go into iTunes, enter the store, search a song, try to play the demo of the song or purchase it, iTunes crashes suddenly. It doesn't show one of those error numbers, just that a problem has caus