Issues running MedRec for Patient

I am using WebLogic Server 10. I am running on Linux. I have built and deployed the MedRec application. When I try to login as a patient, I get the following error on the screen:
A problem has occurred.
System error: value 'null' unacceptable. Please contact customer service.
I see the following in the terminal window from which I started the MedRec Server:
Caused by: java.rmi.RemoteException: Error during setSessionContext; nested exception is:
javax.ejb.EJBException: nested exception is: javax.naming.LinkException: [Root exception is javax.naming.NameNotFoundException: While trying to lookup 'jms.REGISTRATION_MDB_QUEUE' didn't find subcontext 'jms'. Resolved ''; remaining name 'jms/REGISTRATION_MDB_QUEUE']; Link Remaining Name: 'jms/REGISTRATION_MDB_QUEUE'
Do you know what is wrong here and how I can fix this?
Thanks.
---Karen

I've had similar problem. What happens is that teh SMC addresses to the host name and NOT to the fully qualified name, so if you configured your system with FQN like abc.xyz.com, than if your DNS server does not have a valid entry for this host, the SMC won't apply any changes. There are two possible solutions:
1. Create an entry in the DNS server for the host
2. Edit your /etc/hosts file to add a host entry like this
127.0.0.1 localhost
192.168.1.10 abc.xyz.com
192.168.1.10 abc
where you will have both host name and FQN resolved.

Similar Messages

Timing Issue - Running sqlplus for each script in a list of scripts

I have a large number of folders with sql scripts that I need to run from windows with sqlplus. The problem is the scripts must be run in order. When I loop through the scripts and run sqlplus for each one, they sometimes fail because things in the prior script are not yet available.
So I added a jdbc client that checks a table for when the data is available from the prior sqlplus script. It says yes the data is visible in the table so the script can launch the next SQLPlus process but it fails unless I put a 2 second sleep in.
Because sqlplus doesn't have a "CD" command and there are limitations with SQL_PATH and relative imported child scripts, I'm afraid I'm stuck with running multiple sqlplus sessions.

I should clarify that I'm looking for a way to run scripts in sequence with sqlplus. There is an issue where one sqlplus session commits and exits and the next starts but the commit is not yet available to the new sqlplus session. To me this is a bug with sqlplus but maybe someone can explain how this is a "feature".

Issues running SMC for the first time on Sol 10

I just installed solaris 10, and when I launch the SMC to add a new user I get this error:
May 18 12:26:24 kahoali.dyndns.org WBEM_Logging_Service[610]: The management domain file:/kahoali/kahoali does not exist or cannot be managed on server kahoali.
I can't seem to figure out what it's talking about, I have been through quite a few of the settings and files trying to find what it is complaining about.
Any help would be appreciated.

I've had similar problem. What happens is that teh SMC addresses to the host name and NOT to the fully qualified name, so if you configured your system with FQN like abc.xyz.com, than if your DNS server does not have a valid entry for this host, the SMC won't apply any changes. There are two possible solutions:
1. Create an entry in the DNS server for the host
2. Edit your /etc/hosts file to add a host entry like this
127.0.0.1 localhost
192.168.1.10 abc.xyz.com
192.168.1.10 abc
where you will have both host name and FQN resolved.

Retropay by element run Errors for one employee

When i am running retropay for 3711 employees one of them errors out and the retropay by element process ends as Incomplete.
The following is the error for the assignment:
Error ORA-01427: single-row subquery returns more than one row has occurred in table pay_element_entries_f at location 4502
Cause: an oracle error has occurred. The failure was reported on table pay_element_entries_f at location
The log file for that it appears as follows:
Payroll: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RETROELE module: RetroPay By Element
Current system time is 15-APR-2010 16:26:51
===============================================================================
Oracle Human Resources Generic Process
Started at : 15-APR-2010 16:26:51
Chunk Size : 20
Threads : 1
Logging Category :
User Messaging : N
Interlock : N
Trace : N
RR Buffer Size : 500
RRV Buffer Size : 500
Bal Buffer Size : 500
EE Buffer Size : 500
Logging Area :
Assignment ID for Start:
Assignment ID for End o:
HR_6881_HRPROC_ORA_ERR
SQLERRMC ORA-01427: single-row subquery returns more than one row
SQL_NO 4502
TABLE_NAME pay_element_entries_f
APP-PAY-06881: Error ORA-01427: single-row subquery returns more than one row
has occurred in table pay_element_entries_f at location 4502
Cause: an oracle error has occurred. The failure was reported on table pay_element_entries_f at location 4502 with the error text ORA-01427: single-row subquery returns more than one row
Action: Please contact your support representative.
Ended processing at : 15-APR-2010 21:50:07
Total Assignment count : 3711
Total Action count : 3711
Successfully processed : 3710
Skipped : 0
Unprocessed : 0
Errored : 1
===============================================================================
PL/SQL Output
PL/SQL Output
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 595012
Number of copies : 1
Printer : noprint
APP-FND-00092: Routine PRINT_OUTPUT cannot find the file /data/oracle/PRD/inst/apps/PRD_hrmsprod/logs/appl/conc/out/o595012.out to print.
Check if the file exists. Check if the person who started the concurrent manager has read privileges on the directory and on the file. Contact your system administrator to assign read privileges.
Finished executing request completion options.
Concurrent request completed
Current system time is 15-APR-2010 21:50:08
Please can some one help me to troubleshoot so that i can rectify this error for 1 employee?
Edited by: 594647 on Apr 16, 2010 10:46 AM

you can delete the retro assignment action for the moment, so you can launch the run for all employees.
As such, you have some more time to debug the issue.
I would activate some payroll tracing, so you know which fast formula throws this error. And then you should dig further, so you can identify the sql retruning multiple rows.
Or you do a sql*trace. That one will also point you to the offensive sql.

Issue running a report from SAP Business One

I have an issue running a particular report from SAP Business One. I am using Crystal Reports Add-On, all of the reports are working fine except one. When accessing the last page of the report or any page from inside the report the followiong error appears in the dialog box:
Error in the File CollectionDate_Branch_wise {609BA059-89AF-41E9-9AEB-28CB16D13852}.rpt:
The request could not be submitted for background processing.
Edited by: Iqbal Faisal on Feb 22, 2010 6:03 AM

Hi,
Do you mean you have a Main report that is written based on SQL Command and there are 8 subreports linked to the main report?
If that is the case, I assume when user select 'Document Type" eg invoice, it will pass that to the subreport and retrieve information?
This is how I will approach it.
1. Make sure the connection is consistent, if you are using ODBC(RDO) then make sure that is the same for main and subreport. You can check that in Set database connection. Right click on the connection, look at the Properties. Don't assume that the name is the same, eg: SBO_DemoUS, they are all ODBC(RDO) for instannce.
In Crystal, when you are using different connection, it will just prompts you a warning message and it will still run.
2. Delete all and only keep one subreport, example AR invoice and see it will still give a problem.
Replace the parameter with a set value in Record selection in subreport and see what happen.

I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use

@I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
Ram available = 1588 MB
Range = 873 -1143 MB
Recommended Photoshop usage range = 857 however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
The Photoshop I use is registered, I have product # and order # .

Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.

Deployment issue - Login failed for user 'NT AUTHORITY\NETWORK SERVICE'

I am attempting to deploy a site from my development PC to my server. I have no issues running the site on the server using VS2010 Express Web in debug. All page queries are working within the debugger. The connection strings are identical between the PC
and Server, except the host name.
connectionString
="Data
Source=SOCIALSERVER;Initial Catalog=Intake_be;Integrated Security=True"
However, when using the site normally via IIS, the pages containing data access are failing with a permissions problem. The non-data access pages render normally.
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
Looking at the SQL2005 instance via SQL Management Studio, I see security folder with Logins under the Server. NTA\NS is listed as a user login. But, I also see similar folders under each
of 3 databases. NTA\NS is not listed as a login specific to my target dB.
My site is for internal (intranet) use only. There is no internet access into my IIS. This is my first deployment into production. I think I only need Windows Authentication but I lack the experience to make a good decision. My goal is to allow domain users
to access pages that produce read only data. But, I also need controlled access to pages that can modify data. I used the native winform template for ASP.NET 4, which includes some roles based security.
How do I grant permissions for internal users on the pages that access SQL data? How does that security model work with the native roles based security? i.e.
add
name="AspNetSqlMembershipProvider"type="System.Web.Security.SqlMembershipProvider"connectionStringName="ApplicationServices"...
etc.
Thanks for your time and patience on this Deployment 101 type issue.
Kurt

hi,
You receive either of these error messages specifically when you use integrated security.
To resolve you can use one of below.
Method 1: Programmatically change the security context of the ASP.NET worker process to a user who has the correct SQL Server permissions.
Method 2: Change the default configuration of ASP.NET so that the ASP.NET worker process starts and runs under the context of a user who has the correct permissions in SQL Server.
Method 3: Grant the correct permissions in SQL Server so that the ASPNET account (or NetworkService account, for an application that runs on IIS 6.0) has the appropriate access to the required resources.(Go to the Computer Management >> Local User and
Groups >> Groups >> Right Click and go to properties on IIS_IUSRS >> Add appropriate user.
Thanx, Mark as answered if you are ok ..

Issue in LSMW for material master using standard input program RMDATIND!!

Hello guys,
I have a issue in LSMW for material master.
I have a custom field in MARA table. which I want to add in my LSMW.
I added the field in BMMH1 structure. I'm passing the value to this field, But it is not populated in the table when I run it.
Is there anything else I need to do apart from addition of field in the structure BMMH1.
Thanks in advance for your help.
Regards,
Sumeet....

see oss note 44410, it gives you a step by step overview.
https://service.sap.com/sap/support/notes/44410

What's the best specifications for 27" iMac in order to run Windows for best performance?

Hey there. I'm based in the UK and in the process of saving up for my first ever iMac (the new 27" model starting from £1699) after years of owning PC's and laptops, but now I'm finally fed up with Windows-based machines, they just don't cut it when it comes to performance and workload...etc.
I wanted to pick iMac users on the community to get clear advice on what the ideal specifications I should consider configuring my iMac when I finally get round to placing my order in March/April. I aim to run Windows 7/ or 8 via Parallels as I hear it's very good and from what video tutorials of it I've seen on YouTube it appears impressive to think the iMac can handle this at the same time as running Mountain Lion.
The ram I plan on upgrading myself manually, yes - I've sussed that one that very quickly due to Apple's extensive £400 fee to simply upgrade the iMac to 32GB, Crucial here I come!
...I digress a little. I'm torn between the Quad-core i5 and i7 as I don't want to get something that won't deliver best performance when it comes to running Windows in parallel (or coherence mode as I hear it's called). Below are some specs I've configured on 2 saved iMacs in my saved baskets.
CONFIGURATION #1
3.2GHz Quad-core Intel Core i5, Turbo Boost up to 3.6GHz
8GB 1600MHz DDR3 SDRAM - 2x4GB
1TB Fusion Drive
NVIDIA GeForce GTX 680MX 2GB GDDR5
Order total: £2,019
CONFIGURATION #2
3.4GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
8GB 1600MHz DDR3 SDRAM - 2x4GB
3TB Fusion Drive
NVIDIA GeForce GTX 680MX 2GB GDDR5
Order total: £2,299
I'd appreciate anybody's time and patience on this little matter. Thank you.

You don't need to go overboard on your hardware to run windows effectively. I bootcamp win7 on a late 2008 MacBook Pro with no issues. However, for an intense windows game I boot straight into windows. If you do not plan on gaming other than an occasional instance by your brother than this should be an acceptable solution.
One caveat is ram which you have already stated your are upgrading.
A general rule of thumb I live by is get the best you can afford now and it will prolong the need to upgrade in the future. That being said... The choices you have provided are all good choices. Preference on screen size will dictate your overall decision, of course. The need for i5 vs i7 CPU is normally not a factor for the majority of users. If you need to save some money then by all means choose the lesser configuration as it will handle windows fine.
One place you should consider the upgrade is the video card. Since you cannot upgrade this after purchase it is advisable to do this now. Also, the differences between the 675mx and the 680mx are far greater than what the naming implies.
Also, as mentioned in a previous post, the 3TB fusion drive can't bootcamp windows. There is a hack for the non-fusion version, but I have not heard of anyone getting that hack to work on the fusion drive. There are other creative options you can implement to make this work, however, it will require an additional investment in some 3rd party hardware. For a novice Mac user I would recommend the smaller fusion drive and external thunderbolt/USB storage as dictated by your needs in the future.
HTH

PowerBook G4 Install Issue - Still waiting for root device

Hello Everyone and thank you for reading this post.
I have a last generation PowerBook G4 which I wanted to give to a family member since I've upgraded to a newer MacBook Pro.
I started by wiping the hard drive on the PB (in Target Disk Mode) using the Disk Utility application on the MBP using a FireWire 400 <-> FireWire 800 cable.
I verified and repaired the PB HD, no issues found... but that's when things started going bad. I'm unable to boot from the Tiger Install DVD when I restart the PB (holding down C). I get as far as selecting the language, at which point the mouse/trackpad work for a second before freezing up. I'm not able to select a language and that's as far as it goes.
I've also reset the ram and pram (ald+cmd+r+p) with no luck
My latest attempt has been to use the MBP's Disk Utility to partition the HD on the PB (over FireWire) and I also created a Image of the Tiger Install DVD on my MBP. I used the Disk Utility option "scan image for restore" and it checked out ok.
After successfully creating 2 partitions on the PB HD and using Disk Utility to Restore the Tiger Install DVD image to the smaller partition (10GB), I booted the PB holding the Alt key. As expected it found the Tiger Install DVD image on the HD, I clicked the arrow to continue.
At that point the grey screen with the apple logo appears and after a while it changes to a "forbidden" sign. Not getting much information from that I rebooted in Verbose mode (Cmd+V) to see what was going on. The attached image is what I see, unfortunately I don't know much about what it is telling me.
Lastly, I thought the RAM might have gone bad and so I removed one of the 2 ram sticks with no luck. I haven't tried the other RAM stick on it's own yet.
I know this community is full of smart people that might have some suggestion as to what is going on. Here is hoping someone has an idea to help me along.
Cheers

Hello Dalstott;
Thanks for your suggestion and apologies for my late reply. You're right, I hadn't been paying attention to the partition scheme.
I repartitoned the hard drive (this time watching out for the partition scheme) and tried again, however I'm not out of the woods yet.
With both partitions properly formatted, I restored to the Tiger install DVD image on the smaller one and booted from it.
I booted in Cmd+V mode to see what was going on and it seemed to be doing ok, then the screen switched from the verbose output over to the language selection (beginning of the operating system install). However it will get stuck there within a few seconds. The mouse is initially responsive, but after 3-5 seconds the cursor (and keyboard inputs) freeze.
I've tried now a couple of times to click through as many menus as possible before the keyboard/mouse inputs freeze. Sometimes, I get as far as selecting the hardrive to install the operating system on before the clock runs out.
Any idea whould could be going on? Could this be a RAM issue?
Thanks for your advice.

Issues with nested for loops - saving images from a camera

Hi all,
I've written a vi. to capture a specific number of images ('Image No') and save these images, outputted to a folder of my choice. Each image is identified sequentially. However, I wish to do a number of iterations ('Run') of this capture sequence, such that the filename of each image would be 'Filename (Run)_(Image No).png', e.g. run 5, image 10 would be 'Filename 5_10.png'. I have tried a nested for loop for this but I receive an error 'Asynchronous I/O operation in progress' (I've attached a printscreen).
Can anyone assist me in solving this problem? I preiously posted this in machine Vision but got no response (http://forums.ni.com/t5/Machine-Vision/Capturing-image-sequences-issues-with-nested-for-loops/m-p/19...). Please find attached my vi.
Kindest regards and thanks,
Miika
Solved!
Go to Solution.
Attachments:
Labview problem.jpg ‏3841 KB
Image sequence save to file.vi ‏48 KB

Miika,
the problem is not the filenam, but the name of the folder (AHHHHH!). You try to create the same folder in the outer for loop over and over again.... (it is the error message above the '======', not below )
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

AEBS "Ghost" Router Issue - The Challenge for 2012 (and it's only January)

Yes, it's a bold statement to claim that I have the biggest issue so far for 2012. Why may you ask? Because I've stumped RCN (ISP), Access Media 3 (ISP), Apple Tech Support, and Cisco Tech Support. Here's the challenge for you to see if you can figure it out:
***Also, sorry for the long-winded post. I've spend over 20 hours on this issue and racked up a lot of info to share with you. So please bear with me***
I used to own a Linksys E4200 router (early 2011), which I set up using the wireless network name (for example) "wifi-box". Due to performance issues, I returned the router back to Linksys in April 2011. Shortly thereafter, I purchased a used AESB. I performed a factory reset (not a hard reset, as I know the difference between the two) before setting up my network. Things worked great from April to Dec. 2011.
On Jan. 1st, 2012, the building that I live in switched ISPs. I used to have RCN, and now have Access Media 3 (AM3). Both provide the same type of connection - cable - and both provided me with a modem (not sure the model of the one that RCN provided to me, but AM3 gave me a Surfboard 5101N...shudder). Once the transition from RCN to AM3 took place, I performed another factory reset on the AESB before setting up my my network from scratch.
Now, here's where things get start to get weird. I "Created a wireless network" on my AESB, entered in the name "wifi-box" (to keep it the same as before) as the wireless network name, and followed the rest of the steps until I updated the router. Shortly after the AESB restarted, I received a "Dual (or double) NAT" error right off the bat. Looking into the issue futher, there were now 2 wireless network names called "wifi-box"?!? Huh?!? The actual name isn't "wifi-box", but was something quite unique. So it was easy to tell that it was (once) my wireless name.
The next 5 hours were a blur of reconfiguing, resetting, unplugging, etc. anything that is connected to my network. Nothing worked. During all of this, I also switched the name of the AESB to (for example) "apple-wifi".
As a last resort, I unplugged everything - the Surfboard, the AESB, wiped all Airport Util profiles off my 2 Macs, wiped my profile off my 1 PC, shut them down, did the same for my iPhone 3G, shut off the power strip that the modem and AESB were connected to, and unscrewed the coax cable from the wall. I had a friend come over with his laptop, which he never brought over before, and had him search for a wifi signal. As you would guess, "apple-wifi" didn't appear...BUT "WIFI-BOX" WAS AVAILABLE TO CONNECT TO!!! Arrrgggg!!
At this point it seems that the profile is somewhere outside of my condo. But where???
Moving along, I used a tool called WiFi Stumbler to see if that could help shed some light on my issue. What I found was unheard of. The wirless name "wifi-box" was linked to a Linksys router. Once I discovered this, I logged into my Linksys profile (192.168.1.1) to see if it still worked. IT DID!!! However, that was short lived, because as soon as I clicked on a tab, I was booted out. On top of that, I couldn't log back in. Not sure if this is because it was looking for the Linksys router or not. Whatever the reason...it's just flat out weird.
Because the password to log into my old Linksys profile was the same, it somewhat leads me to believe that someone doesn't have the same wireless name that I do.
Over the past two days, I talked to RCN, Linksys, Apple Tech, AM3, had an AM3 tech out to look at it...no one knew what the issue was. When I talked to Apple, and they thought it might be the Surfboard. The tech said that the Surfboard is also a router, which is why the "dual NAT" error is taking place. However, I then spoke to AM3 and they told me the Surfboard was only a modem. I looked it up online, and it's just modem. Also, I was able to get rid of the "dual NAT" error, but yet I still cannot connect.
My current error msg is: "Airport has the self-assigned IP address 169.XXX.XXX.XXX and will not be able to connect to the Internet". The AirPort indicator light in my Network Preferences is orange, but the AESB indicator light is green (and is reporting no issues).
To end this, (if you're still reading), any help that you may have is greatly appreciated. Everyone I spoke to is stumped. I'm not sure where to go next from here. If you know anything, please let my know . As a quick recap, here are my current settings:
Devices:
     1) MacBook Pro (2011), OSX Lion;
     2) MacBook (2009), OSX Snow Leopard;
     3) IBM Lenovo PC, Win XP SP2
     4) iPhone 3G (iOS 4.2)
Modem:
     Former modem: unknown
     Current router: Surfboard SB5101N
Router:
     Former router: Linksys E4200 (wireless network name "wifi-box")
     Current router: AESB - Apple AirPort Extreme Base Station - Simultaneous Dual-Band MC340LL/A (wireless network name "apple-wifi")
     # of Router in my condo: 1
ISP:
     Former ISP: RCN
     Current ISP: Access Media 3
Thanks and good luck (to you and me)

Thanks Tessarax,
Thanks for the reply, and no worries about the long form answer. Yesterday, I went through your process twice (for good measure). I also unplugged/shut down everything overnight and tried it once again today. Unfortunately, the results are the same.
Me network is currently up and running, albeit a limited connection. It's still producing the "Double NAT" error. My Internet is set up as follows:
These are the settings for "apple-wifi" in the AirPort Util.:
Connect Using: Ethernet
Ethernet WAN: Automatic
Connection Sharing: Share a public IP address. ("Bridge Mode" and Distribute a range of IP addresses" cause additional errors which brings down the network. These errors include setting a DHCP beginning/ending address and no Internet connection. I tried setting the DHCP beginning/ending address several times, but the AEBS never accepts my entries.)
IP: 10.XXX.XXX.XXX
DHCP: Beginning/Ending Address: 172.XXX.XXX.XXX
DNS: 8.8.8.8, 8.8.4.4
These are the settings for "wifi-box" in the Network Preferences:
IP: 192.XXX.XXX.XXX
DNS Servers: 8.8.8.8, 8.8.4.4
Search Domains: 221am3.com
802.1X: No profiles (I deleted them)
Bypass proxy settings for these Hosts & Domains: *.local, 169.XXX/XX
Use Passive FTP Mode (PASV): checked
MAC Address: same as "apple-wifi"
These are the settings for "apple-wifi" in the Network Preferences:
IP: 172.XXX.XXX.XXX
DNS Servers: 172.XXX.XXX.XXX
Search Domains: 221am3.com
802.1X: No profiles (no profiles were avaible for "apple-wifi")
Bypass proxy settings for these Hosts & Domains: *.local, 169.XXX/XX
Use Passive FTP Mode (PASV): checked
MAC Address: same as "wifi-box"
Two new discoveries that I uncovered yesterday are as follows:
1. 802.1X (under Network Preferences): There were 3 profiles that I deleted from this tab last week. After resetting the network, they came back. Whether they were present or deleted, it didn't affect the connectivity of my network. Just mentioning that these profiles came back after deletion (I deleted them again).
2. Yesterday, the network in my building went down for a few hours. I noticed that neither "wifi-box" nor "apple-wifi" were available to connect to. This is an obvious insight, but it seems that when "wifi-box" is unavailable, "apple-wifi" is unavailable as well. However, 'wifi-box' has always been available even when "apple-wifi" is down. Sounds like my Internet signal follows this path:
AM3 > Condo building > "wifi-box" > my condo > Surfboard modem > AEBS "apple-wifi" > my devices (laptops, iPhone, Xbox, etc.)
Two new questions:
1. What is DHCP Client ID and is this something that I need to provide?
2. Could the cables that I'm using cause any problems? Here's the cable that I'm using and the connections between the devices:
CAT5: Router > AEBS
CAT5e: AEBS > MacBook Pro
CAT6: AEBS > Xbox
If there's other questions or infer that you need, please ask

Using MD50 to run MRP for Sale Order

Dear all,
I have some problem when using MD50 with Mill Product Industry.
When SAP system not activate Mill Product yet. I used transaction code MD50 to run MRP for Sale Order, the system have generated planned order for multilevel. But when SAP system have activated Mill Product, I used transaction code MD50 to run MRP for Sale Order, the system only generate planned order for single level. I think that we have to configure something based on Mill Product Industry. So can you help me for this
Thanks, Regards

Hi,
Check with following links which may help you resolve your issue :
http://www.sap.com/sme/whysap/industries/millproducts/index.epx
http://help.sap.com/saphelp_di471/helpdata/en/4e/1796374b088e5ce10000009b38f8cf/frameset.htm
http://help.sap.com/content/documentation/industry/docu_is_mill.htm
Regards,
Tejas

How run app for customers and how to send dunning notice to vendors

Hi experts.
Can any one help on following issue with example scenarios.
how run app for customers and how to send dunning notice to vendors

Hi,dear
you should enter customer account numbers in f110 for payment receiving from customer, and assign dunning procedure to vendor master record and process the dunning to vendor by using f150.
regards,
nagesh.

Run MRP for production order/maintenance order has been release

Hi all,
please tell me how to configure for running mrp for production order/maintenance order has been release. as you know, i want production order has not release will not appear in MD04. I think that is the way for running mrp will not take care about this production order has not release
Thanks all

Hi Hoai,
It is impossible to exclude production order from net requirement calculation in MRP run. You may take a look at the online documentation under the PP-MRP area.
Material Requirements Planning (PP-MRP)
   Planning Process
     Net Requirements Calculation
       Net Requirements Calculation for MRP
But there is a way to temporarily exclude production order from MRP. That is you can set the 'delivery completed' indicator in 'Goods receipt' Tab in in production order. Please note that this order will not appear in MD04. Actually to some degree, this order could be considered as completed because ticking the indicator could set status 'DLV' for the order. But you still can execute confirmation, goods issue and goods receipt activities. This way is just a workaround. You may
consider it.
Or maybe you can consider the useage of BADI: MD_CHANGE_MRP_DATA to change the MRP run data to see if this could fulfill your requirement.
Regards,
Rachel

Issues running MedRec for Patient

Similar Messages

Maybe you are looking for