Issues setting up a DDX file in Document Builder in Livecycle ES2

I am currently trying to create a DDX document in ES2's document builder, according to the tutorial at this URL:
http://help.adobe.com/en_US/livecycle/9.0/workbenchHelp/help.htm?content=003662.html#15553 09
I'm basically trying to render an XDP("myForm") by inserting fragments that I have specified("Fragment1") into the form.
Now, the example I mentioned above tells me to specify a source for my XDP content(which I assume is the folder where my fragments are kept), an insertion point for the fragment(which I again assume that it means the name of the subform of "myForm" where the fragment is to be inserted, which I have named "subForm1").
Then there is the fragment name, which I have specified as "Fragment1".
The DDX file validates fine, but when I try to preview the result, it firstly throws an 'xfa error' when I try to view it in the browser, and when I save the file and open it in designer it doesnt have the fragment inserted into it; just the base XDP form.
I am seriously struggling to find any help on this subject, so if anyone knows how to help, please do....
Regards
Ross Malan

OK, found the solution.
I was missing the insertion point on the base document. All you do is specify a subform on the document inside designer as an insertion point, under the object tab, and then give it a name. Then you use that name again when specifying the insertion point for the XDP content in the document builder in workbench.
After that, the PDF should be generated with the fragments you specify.

Similar Messages

[solved] Issues setting up a samba file share..

Hey all! I'm trying to setup a samba file share on one of my computers I have.
Here is my config:
[global]
workgroup = WORKGROUP
server string = piefile
netbios name = piefile
security = konoii
null passwords = yes
map to guest = bad user
load printers = no
printing = bsd
printcap name = /dev/null
disable spools = yes
log file = /var/log/samba/%m.log
max log size = 50
dns proxy = no
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIVE SO_RCVBUF=131072 SO_SNDBUF=131072 SO_KEEPALIVE
[piefiles]
path = /mnt/storage/
read only = no
public = yes
writable = yes
guest ok = no
When I go to try to connect to it, it says:
Failed to open "piefiles"
Permission denied."
Last edited by muffinss (2012-05-10 22:26:34)

I did add a user. I created one on the system and did pdbedit -a -u username
I did fix my problem though, I had to run smbpasswd -e username to activate the username. Now I am able to connect to it from Thunar and my windows machines

Stitching/mergigng of xdps using document builder when fragments have been used in xdps.

Hi,
I am trying to merge xdps using document builder in LiveCycle workbench. Basiclly I am using the option "Dynamic stitching" in document builder to merge more then one xdps. So I am able to do it when my xdps are not having any fragments.
But I am not able to get the merged xdp when fragments are there in my xdps.
It is throwing some error.
It says "XFA dynamic assembler failed to stitch a fragment".
So can I specify the fragment path while merging these xdps.
Please let me know the inputs on this. Or is there any other way to merge xdps which are having fragments.
Thanks in advance,
Ashish

One probable reason is that the individual XDPs have incorrect fragment references. Have you checked out
http://kb2.adobe.com/cps/521/cpsid_52158.html
Any subtle mistakes in the path like a folder name specified twice in the path (as it was programmatically generated?), or an extra forward slash, etc.?
Did you try to render these XDP forms (with fragments) individually using LiveCycle process orchestration/API?

I am setting up a new iMac and need help syncing files to Dropbox. On my old computer I had it set where when I saved a document, it was saved on my hard drive, as well as to a folder in Dropbox. I can't remember how I set this up. Any help?

I am setting up a new iMac and need help syncing files to Dropbox. On my old computer I had it set where when I saved a document, it was saved on my hard drive, as well as to a folder in Dropbox. I can't remember how I set this up. Any help?

The way that Dropbox works is that it keeps a copy of all your files in your local Dropbox folder on your hard drive (which is, by default, directly under your home folder). Adding files to that folder will sync them to the Dropbox server.
You do of course have to download the Dropbox application to enable this (download link at the top right of http://dropbox.com ).
Matt

How to add a file in Document Set using ECMA script?

Hi,
I want to upload a particular file into Document set using ECMA script.
I can do it easily through C# but unable to achieve the same using ECMA Script.
Any pointers or piece of code will be helpful.
Thanx in advance :)
"The Only Way To Get Smarter Is By Playing A Smarter Opponent"

The following blog post provides a way to create a document set using ECMA:
http://blogs.msdn.com/b/mittals/archive/2013/04/03/how-to-create-a-document-set-in-sharepoint-2013-using-javascript-client-side-object-model-jsom.aspx
The following blog post provides a way to upload files into a document set using CSOM:
http://www.c-sharpcorner.com/Blogs/12139/how-to-create-document-set-using-csom-in-sharepoint-2013.aspx
See if you can follow the logic in the CSOM example to apply it to ECMA. Let me know if you have specific problems with it.
Dimitri Ayrapetov (MCSE: SharePoint)

Indesign makes file bigger as a PDF even though set at a smaller size in Document Setup

Hi there,
When I export my file (which is set to 132mm x 198mm in Document Setup) to PDF, the PDF file is much bigger. In the information panel about the page in Indesign, it says the page is the size I specified it to be, but that the 'media' is 210 x 250 (or something like that). This is the size it comes out as as a PDF. I need the PDF to be 132 x 198 - how can I do this?
Thanks,
Lucy

Did you use the Page tool to change the page dimensions?

My pdf reezes when I click on COMMENT. I am trying to get at the tools to edit a pdf. If I use the tools from the toolbar, there is no issue, but once I click COMMENT, the document freezes and I have to open Task Manager to crash it. This started in the l

Sorry, I am new to the type of problem-solution process and I do not know how to edit my first statement. My true statement is below:
My pdf freezes when I click on COMMENT. I am trying to get at the tools to edit a pdf. If I use the tools from the toolbar, there is no issue, but once I click COMMENT, the document freezes and I have to open Task Manager to crash it. This started in the last seven days (3.31.15).

I answered your questions below, BUT while I was searching for properties, I found the REPAIR ACROBAT INSTALLATION feature, did the repair and (Voila!) the issue was resolved!
Thanks for making me search for information.
Karen
I am using Acrobat XI Pro, version 11.0.10.32.
I did not create the file I was working in during the freezes, so I tried a PDF that I created with Adobe and it also freezes when I click on COMMENT. I did discover that the COMMENTS plug-in is loaded. (see image
I have used COMMENT for years without this issue occurring. It started in the last 2 weeks.
I could not find Properties under the file menu, but found a security setting in Preferences under the Edit menu. It did not have a way to allow/disallow COMMENT.

PDF to DDX file

Anyone else having issues recently with DDX calls that seem to return corrupted text from recent PDF files. Coincidentally, Firefox 26 renders the same same document incorrectly.
AFC

[email protected] wrote:
> 1. can anyone send me an example of a simple DDX file (e.g. edding a comment) and how should i use it in order to edit an existing PDF file.
> 2. where can i find the full API\ SDK of this product?
Look in the installation directory where you installed Assembler. You should see a 'Documentation'
folder. In it are two documents that you'll need: developer_guide.pdf and ddx_reference.pdf.
Justin Klei
Cardinal Solutions Group
www.cardinalsolutions.com

OPENING .PPTX File"This document not in powerpoint format"

Hi, I am new and am hoping somebody can help me. I received a file a couple of hours ago from a friend who uses Microsoft Power Point, I have a presentation in the morning.
I have downloaded the file, it is .pptx. When I click on it to open it it in Keynote I get an error message that tells me "The document is not in Powerpoint Format." No matter what I try to get this to open it will not. I have a Mac Book Air running v:10.8.3 with the latest version of Keynote.
Would anyone be able to offer me help or suggestions? Here is a DropBox link to the PPT. https://www.dropbox.com/s/fcj1ivb9qucr5j0/Sunless%20101%20Course%20-%202013%20-% 20Hedlux%20-%20v16.pptx I have opened hundreds of .pptx files in Keynote and this is the first issue I have ever had.
Thank you in advance for any help that anyone can give me.
Riley

Your PowerPoint file runs OK on my machine. I can think of a number of issues that are causing the file not to open.
However, what I would do, as you have little time to problem solve this issue, is playback the presentation in Open Office. This application is freeware its used by many government departments and universities in every country of the world. I use it daily in place of Microsoft Office.
Download it here:
Open Office for Mac
Change the security setting for this download only as the Mac OS settings prevent all downloads except those from the App Store, once downloaded, you can change it back:

Setting up new Lion Server - Accessing documents

We are in the process of upgrading from a 10.4.11 server.
We are not migrating anything over, and are starting from scratch. I've configured users and groups but had a question regarding documents.
On our old server, we used share points to store all our working files. In Lion, I see a "Give this group a shared folder" button. Inside that are "All My Files" and "Documents".
Is there any right or wrong way to store all our working files (small ad agency with art files that are accessed internally and externally). Would I be ok to use that for our working documents? Or should it be a folder somewhere else that is accessed through a share point?
Once I configure the folder on the Lion server I will be copying the files over from the old server
Thanks in advance.

Well, you are again asking questions that don't have a clear answer. Let's first look at the physical drive.
So, yes, the mini comes with two drives. But if you are placing the OS on one drive and data on the other, you have no redundancy. The mini is lacking enough redundant features, don't trust your data to a single drive. I would recommend mirroring the two drives and storing OS and Data on the same volume or storing just OS on the internal drives and getting a raid capable device for your data. Since the mini is a closed box, having your data outside at least allows you the portability in the event the mini fails. Otherwise, when AppleCare tells you to ship them your mini that will not power on, away goes your data.
As for structure, I tend to work in this fashion. Lets assume you are sharing from the boot volume. It will look something like this:
/Applications
/Library
/System
/Shared Items
/Users
I suggest doing something like this to avoid Apple's structure:
/Applications
/Library
/System
/Shared Items
/SharedFolders
     /Share 1
     /Share 2
     /Share 3
     /Work in Progress
/Users
But doing this, you are sharing the folders called Share 1, Share 2, Share 3, Work in Progress. The parent folder, SharedFolders, is simply a container and requires no special permissions since users don't interact with it. However, it makes a convienient container to targer for backup purposes. So instead of defining a backup source for multiple folders, you simply do the one that contains all your shares.
Now the other big change that you will need to wrap you head around is that in 10.4.x you were likely using POSIX inheritance. That no longer exists. You can only set your shares to use ACLs. Now this is generally a good thing. However, if your crew is using CS4 and older, you are going to have an issue with saving to the share. Especially with Photoshop. If you are CS 5 and above you "should" be ok.
Protect your data. Mirror the drives. It is the only redundancy you have on a mini. But remember... redundancy is not backup.

Illustrator won't run: "unable to set maximum number of files to be opened"

I have an intel macbook pro (core duo with 2GB ram) and a copy of purchased adobe creative suite 2. Other applications in the suite like photoshop, acrobat, etc can run on my mac without any problem. But when I try to run illustrator, it just shows an error message "Unable to set maximum number of files to be opened" and quits. I also installed a trial version of illustrator cs3 and got the same problem. Can anyone help? Thanks.
CC

Hi, I realize this is an old thread but it was unanswered and the issue has come up again in a newer thread:
http://forums.adobe.com/message/2534652
If the original poster sees this, can you reply tin the new thread and let us know if you were ever to solve this problem?
Thanks!

Open Another Project - how do I set up the published files?

I created a Menu project that launches (via buttons) two other projects. Each of these other projects has a button to return to the Menu. I copied the published set of files to each of the Callees folders. So, Menu\Callees has Run 1 and Run 2 folders (all the published files) Run 1 and Run 2\Callees each have Menu folder with all the published files. Menu launches Run 1 and Run 2 fine but the Menu button on Run 1 and 2 works once, then I get this:
No webpage was found for the web address:file:///C:/Users/Jeff/Documents/My%20Adobe%20Captivate%20Projects/menu%20test/Menu/callees /Run_1/callees/Menu/callees/Run_1/callees/Menu/index.html
Anyone have a simple explanation for how I should be setting up the published files?
Thanks so much,
Jeff

Thanks Rob,
Would running these from a web server resolve the file location problem I asked about? I tested the SWF version on my HD and got a similar error message (this time looking in the root directory, not the callees folder.) Can you point me to a reference re: how to set up files when running another project?
Thanks,
Jeff

Some files in "DOCUMENTS" icon in dock won't open. Get msg saying You need a newer version of Pages to open this document." Have Pages 4.1 installed. Same files will open ok from Finder, Pages App. Recently sync'd with ipad2 (Pages) after iOS5 installed.

Some files in "DOCUMENTS" icon in dock won't open. Get msg saying "You need a newer version of Pages to open this document." Already have Pages 4.1 installed. Same files will open ok from Finder/Pages App./selected file. Prob not noted until recently after sync'd with ipad2 (Pages) when I installed iOS5. Anyone-- please?!

You have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed almost 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Rate/review Pages 5.2 in the App Store.
Peter

How to set print option for a Billing document using T-code VF02

Hi All,
Please suggest me the way to set print option for a Billing document for T-code VF02 and please let me know how to get print preview for any particular Billing document?
regards
Anand.

Enter the billing documents detail
Goto Goto> Header>Output.
Check the status for your output type in this screen.
If it is green then come back to the VF03 screen.Enter the billing document number.
Click on Billing document-->Issue output to.
Press (CtrlShiftF1) or click on the icon beside "Print options".
Here you can see the print preview.
If the status is red then click on the processing log.Here you will get the error messages.
If the status is in yellow colour,then click on the "Further Data" button
Set "Dispatch time" as "4 Send immediately (when saving the application)"
Before the print preview option you should make sure you have added correct output type to the relevant billing document. To do that, go to transaction VF02.
Enter the billing document no
Go to Menu option -> Go to -> Header -> Output
In that screen you have to add relevant output type. (Standard output type is RD00)
Add that & press enter key
Highlight that line & press "Further Data" button
Set "Dispatch time" as "4 Send immediately (when saving the application)"
Press "Back" Button
again select that line & go to "Communication method" button
Set "Logical destination" as LOCAL"
Don't mark "Print immediately" & "Release after output" ticks. If you mark them, sa soon as you save the billing document, you'll get a print out.
Press "Back" Button
Save
Now form the initial "Change Billing Document" screen, Go to Menu option; Billing Document -> Issue Output to
You can see that output type line appear.
select that line & press "Print Preview" button or (CTRLSHIFTF1)
You can see the print preview.
Alternatively you can use VF31 to print multiple print outs at same time.
If you want to get PDF outputs of billing documents, go to your printer settings in the your computer from Control Panel.
Set PDF Writer as "Default Printer" (Right click & select "Set as Default Printer")
Then normal way, print the billing from SAP.
It'll automatically send to your PDF writer. You can save it to the path you want,

In Adobe Acrobat Pro XI, is there a way to set defaults when combining files?

My specific problem; When I combine files, Adobe creates the bookmarks (which is desirable). These bookmarks however, always seem to default on "page width" view. I would prefer to have the bookmarks set to "fit page". It is very cumbersome to edit each bookmark to reset the view. (this is another issue which should be addressed as well).
My preferences already are set to view the files in fit page, single page, however this setting does not seem to transfer to the combined file.
Is there a way to globally set the preferences for this? Even the settings during the combining function do not give options for the page view settings.

There isn't a way to set this during the Combine process but it's easy to change all the bookmarks in one go using the following technique:
Open the bookmark navigation pane and select all the bookmarks (be sure to expand all subbookmarks).
Right-click and choose Properties from the context-sensitive menu.
Click the Actions tab and choose Execute a menu item from the dropdown.
Click the Add button and choose View > Zoom > Zoom to Page Level and click OK.

Issues setting up a DDX file in Document Builder in Livecycle ES2

Similar Messages

Maybe you are looking for