Automate cf mx 7 server configuration using scripts?

Hi all,
just wondering is it possible to change a ColdFusion MX 7
server configuration using scripts? For example,could I change the
password for a data source without having to go into the console
and change it manually?
Cheers.

Similar Messages

Adding Server to cluster will make server halt (weblogic) & cannot shutdown the server by using script command

          Hi,
          When I Adding a server from the server list to the cluster , and
          click 'apply' , the weblogic server will be halted. Why could it
          happen and How can I solve this problem?
          Furthermore,I try to shutdown the server by using the command script
          - java weblogic.Admin -url http://localhost:port SHUTDOWN -username
          username -password password ( e.g. java weblogic.Admin -url http://999.99.99.99:7001
          SHUTDOWN -username system -password weblogic ), there is an error
          message "Exception in thread 'main' java.land.NoclassDefFoundError:
          weblogic/Admin" . Why?
          Chris


          Your CLASSPATH must include $WL_HOME/classes to startup as:
          java weblogic.Admin t3://localhost:<port> SHUTDOWN <USERNAME> <PASSWORD>
          Note here protocol is t3. Brian
          "Joe E. Schwarz" <[email protected]> wrote:
          >
          >Chris,
          >You gave probably forgotten to set your CLASSPATH to,
          >for example
          >on NT, C:\bea\wlserver6.0\lib\weblogic.jar.
          >Joe
          >
          >"Chris" <[email protected]> wrote:
          >>
          >>Hi,
          >>When I Adding a server from the server list to the cluster
          >>, and
          >>click 'apply' , the weblogic server will be halted. Why
          >>could it
          >>happen and How can I solve this problem?
          >>Furthermore,I try to shutdown the server by using the
          >>command script
          >>- java weblogic.Admin -url http://localhost:port SHUTDOWN
          >>-username
          >>username -password password ( e.g. java weblogic.Admin
          >>-url http://999.99.99.99:7001
          >>SHUTDOWN -username system -password weblogic ), there
          >>is an error
          >>message "Exception in thread 'main' java.land.NoclassDefFoundError:
          >>weblogic/Admin" . Why?
          >>
          >>
          >>Chris
          >

Creating a new web server instance using script

Hi
We have to create 10 instances of sun one 6.1 web server again and again. Creating them from GUI and deleting them after testing is going to be a time consuming process. Is there a way to copy an existing instance with the help of some command line tool or shell script (If we know what enteries should be there in each configuration file). Any help will be appreciated.
Thanks
Anoop

6.1 unfortunately does not provide a way to create instances through command line tool. With 7.0 (soon to be released as Beta in the coming weeks) will have a full fledged command line tool for all server administration tasks
meanwhile, as a temporary work around one could do the following within a shell or perl script.
[ this approach is totally not supported by Sun. You are on your own ]
1. cd INSTALL_ROOT
2. copy https-HOSTNAME to https-test (/bin/cp -Rf https-HOSTNAME https-TEST) - assuming TEST is the new instance name that you want to create.
3. use a script to edit the following files and replace 'https-HOSTNAME' to https-TEST in all occurrences.
list of files to change:
start , stop , reconfig , restart , rotate
config/magnus.conf
config/server.xml
4. finally, you can use 'HttpServerAdmin' to change the listener port, security settings etc
./bin/https/bin/HttpServerAdmin -h
http://docs.sun.com/source/819-0130/agcmdln.html
for eg ( i would do something like this )
(to create instance https-TEST from default server instance, assuming you do not have special ACL file configured in the default instance, I would do something like )
use a perl script to copy https-HOSTNAME to https-TEST
(/bin/cp -Rf https-HOSTNAME https-TEST)
/bin/cp httpacl/generated.http-HOSTNAME.acl httpacl/generated.http-TEST.acl
cd https-TEST
replace https-HOSTNAME to https-TEST in following files (start, stop, restart, reconfig, rotate, config/magnus.conf, config/server.xml)
cd ..
now delete the listener socket id
./bin/https-TEST/bin/HttpServerAdmin delete -l -id ls1 -sinst https-TEST -d INSTALL_ROOT (where you server is installed)
followed by create a new listener socket id
./bin/https-TEST/bin/HttpServerAdmin create -l -id ls1 -ip ANY -port NEW_PORT -sname HOSTNAME -defaultvs https-TEST -sinst https-TEST -d INSTALL_ROOT
[ similarly, you can perform other server admin tasks using this command' ]

ArchiveLink with SAP HTTP Content Server configuration using SAPdb MaxDB

We have configured SAP 4.7 to use ArchiveLink to store outgoing POs. The POs are in PDF format and are to be stored on an SAP HTTP content server using MaxDB. We believe everything is setup but when we go to retrieve a stored file, using and HTTP link we do not see the document. Here is a sample HTTP link:
http://company-sap20.company200-sap.com:1090//ContentServer/ContentServer.dll?get&pVersion=0046&contRep=ZT&docId=47E9C60A28145211E10000000A0126F3
Can anybody give me a few pointers?
What table in the MaxDB shall I look at? Where is the docID being passed to?

I'm sorry to say that I don't know.
AFAIK, the report gets documents from the document store. The Contentserver itself runs embedded in the Web-Server.
Besides the trial to write a trace file with the Contentserver (see Contentserver.ini somewhere on your Web-Server) I strongly recommend to open a customer message.
Regards Thomas

Issues with an LDAP server configured using DHCP instead of static.

Can anyone tell me if there is a known issue using a DHCP address instead of a static IP address to build a 10.4 MAC server that will is a LDAP master?
I have an LDAP master that is running 10.4 that has user account issues. Random users will suddenly not be able to authenticate against the server. I have been told this is because the server was originally built using a DHCP address and then migrated to a static IP. Being a UNIX geek this does not seem to make a lot of sense to me but I am new to MAC..... So?

It absolutely could be the cause of the issue. Open Directory uses Kerberos (among other things) for authentication. Kerberos is VERY VERY VERY particular about DNS... and if your OD master changed the IP address, it could cause these problems. I wouldn't expect that it would ever work, but perhaps some days the IP is the same as it was during initial setup.
Do a 'sudo changeip -checkhostname' from the server and see if it says everything is okay. If not, you definitely have things you need to fix. Frankly, with DHCP on the server you are 100% guaranteed to have problems at some point.

How to load data into table Using Script Task

We have a directory/folder where we have a file. We need to insert the File Created Date , File Name , Extension into the database table of Sql server by using Script Task.
So could you please suggest , how to frame the connection string , fetch the file details and insert the data into the database table using Script Task of SSIS 2008

You can achieve it as follows using standard script task
1. Add a ForEachLoop container to point to your directory to iterate though the files. Add a variable of type string inside loop to get file name of each file it iterates. Choose option Filename and extension. Add a variable to just store extension part
(FileExtension), set EValuateAsExpression true for it and give expression as below
SUBSTRING(@[User::FileName],FINDSTRING(@[User::FileName],".",1)+1,LEN(@[User::FileName]))
2. Add a script task inside loop and pass filename variable as a read only variable to it. Crete a new variable to get creationdate and pass it as ReadWrite. Inside write code as below
Public Sub Main()
' Add your code here
Dim f As New System.IO.FileInfo(Dts.Variables("FileName").Value.ToString())
Dts.Variables("FileCreatedDate").Value = f.CreationTime
Dts.TaskResult = ScriptResults.Success
End Sub
3. Add a Exec SQL Task after Script task inside loop and give a query like below
INSERT INTO TableName (FileName,CreatedDate,Extension)
VALUES(?,?,?)
and in parameter tab map the parameter placeholders 0,1 and 2 to @[User::FileName],@[User::FileCreatedDate] & @[User::FileExtension] variables
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How can apply configure file in ssis by using script task ?

I had two config file in ssis
1. config file as per QA
2. config file as per Production
I think apply dynamically by using script task for above file (acc to server)
How can I apply in script task for config file path in C# script
any one provide Helpful code ??
Thanks

I applied script Task with below code :
public void Main()
//User::Config,User::Config_Pd,User::Config_QA
Application App = new Application();
Package Pack = new Package();
DTSExecResult pkgResults;
string strPackageName;
string filename = "";
string configvalue;
configvalue = Dts.Variables["Config"].Value.ToString();
strPackageName = Directory.GetCurrentDirectory().ToString() + "\\Excel Reports from Remittance advice\\Child.dtsx";
try
Pack = App.LoadPackage(strPackageName, null);
if (Pack != null)
if (configvalue == "DEV")
filename = Dts.Variables["Config_QA"].Value.ToString();
else if (configvalue == "PROD")
filename = Dts.Variables["Config_Pd"].Value.ToString();
else
Dts.TaskResult = (int)ScriptResults.Failure;
System.Windows.Forms.MessageBox.Show("Unable to bind the XML Configurations");
return;
} System.Windows.Forms.MessageBox.Show("Config:"+filename);
Pack.ImportConfigurationFile(@filename);
Pack.EnableConfigurations = true;
Pack.Configurations.Add();
App.SaveToXml(strPackageName, Pack, null)
pkgResults = Pack.Execute(); //Pack.Execute();
System.Windows.Forms.MessageBox.Show("Results:" + pkgResults.ToString());
Dts.TaskResult = (int)ScriptResults.Success;
But ouput in ssis showing as
But some thing missed in code plz help me ...

Automate the Cube loading process using script

Hi,
I have created the Essbase cube using Hyperion Essbase Studio 11.1.1 and my data source is Oracle.
How can I automate the data loading process into the Essbase cubes using .bat scripts?
I am very new to Essbase. Can anyone help me on this in detail?
Regards
Karthi

You could automate the dimension building and dataloading using Esscmd/ Maxl scripts and then call them via .bat scripts.
Various threads available related to this post. Anyways, you could follow the following steps.
For any script provide the login credentials and select the database.
LOGIN server username password ;
SELECT Applic_name DB_name;
To build dimension:
BUILDDIM location rulobjName dataLoc sourceName fileType errorLog
Eg: BUILDDIM 2 rulfile 4 username password 4 err_file;
For Dataload
IMPORT numeric dataFile fileType y/n ruleLoc rulobjName y/n [ErrorFile]
Eg: IMPORT 4 username password 2 "rulfile_name" "Y";
Regards,
Cnee

General Warning: could not get server configuration in ldap, using cached c

Guys,
desperately need some help here. I have an installation consisting of 4 mtas that speak to an ldap. I'm currently in the process of adding 2 more. I've added the fifth and there has been no problem whatsoever. I'm now trying to add the sixth. I install the software. There are no error messages as the software installs. It's able to see both the configuration and the user directories. Once this is finished I immediately go and run start-msg and for each component I get the message :
"General Warning: could not get server configuration in ldap, using cached configuration information".
I've tried pinging and tracerouting my ldap server with no problem, I can telnet/ssh to it. My server configuration is almost eaxctly the same as the fifth server. I make no other changes after the installation scripts finishes, yet it can't talk to the ldap.
I running IMS5.2p1 on a Solaris 8 SPARC server.
Thanks
Ali

That error message only comes up when the server can't get to the config ldap server on startup. There's no other time when you see this.
There is either a mis-configuration of your server, or of your ldap, or you just can't get there from here.
Why are you installing 5.2p1, now? 5.2p2 has been out for over a year. ..
6.0 has been out for well over a year, and 6.2 has been out for many months, now. I hate to see you installing old software, when new is available.

Automatic Login using Script

How do i automate logging into a server using script.
i want to retrieve a specific data from a number of servers. the number of servers is too large for that to be done manually. Please find a solution for this

Trusted RSH (using .rhosts file), trusted SSH (using .shosts and known_hosts files), or SSH with the expect utility to provide passwords. Each have their benefits and drawbacks.
Information regarding each of these solutions is available en masse on the Internet. Google is a friend to all system administrators.

How to automate Sql Server Configuration Manager settings?

For example, I have just installed Sql Express 2012, and need to configure it for use over the local network. Usually I just manually open Sql Server Configuration Manager -- Sql Server Network Configuration -- <myinstance>, and enable TCP/IP on 1433.However,
I am not going to be available to do this on every customer's computer. I need to do these steps using a script or something. Is there a way to do this?

Have a look at this stackexchange thread:
http://stackoverflow.com/questions/9138172/enable-tcp-ip-remote-connections-to-sql-server-express-already-installed-databas
There are two good options outlined there
1. install it with the /TCPENABLED=1 switch (in the original post)
2. Execute a wmi script post-install (in the answer)
Note: if you decide to use WMI the root path will be \root\Microsoft\SqlServer\ComputerManagement11 for 2012
I will have to support install time, and post install. Does TCPENABLED=1 also setup the 1433 port value in TCP/IP Properties - IP Addresses tab?

Configuring Oracle Application Server to use a user friendly url

Hi All,
I am having trouble configuring the apache httpd.conf file within an applicaton server to be able to use user-friendly urls for the infrastructure identity management tools server. I also need this for security reasons as well as hardware reasons - loadbalancing.
At the moment I have a standard setup, whereby the sso application server is using port 7777. I would like the user not to enter the port, but to enter just a standard url, like http://login.<company>.com.au, so that if the user needs to modify oid using the oiddas web application, they can enter something like http://login.<company>.com.au/oiddas/ rather than http://<machine host name>:7777/oiddas/. This would also be used by portal for sso logins.
From the standard installation, Apache was configured as follows:
Port 7777
Listen 7777
ServerName <machine host name>
DocumentRoot <root document folder>
Now reading the documentation from the Oracle Application Server Installation notes for the Http Server, they document how to do this (in the loadbalancer section - this will eventually be used in the hardware setup):
Port 80
Listen 7777
Listen 80
# Virtual Hosts
# This section is mandatory for URLs that are generated by
# the PL/SQL packages of the Oracle Portal and various other components
# These entries dictate that the server should listen on port
# 7777, but will assert that it is using port 80, so that
# self-referential URLs generated specify www.oracle.com:80
# This will create URLs that are valid for the browser since
# the browser does not directly see the host server.oracle.com.
NameVirtualHost <machine ip>:7777
<VirtualHost <nameofmachine>:7777>
ServerName login.<company>.com.au
Port 80
</VirtualHost>
# Since the previous virtual host entry will cause all links
# generated by the Oracle Portal to use port 80, the server.company.com
# server needs to listen on 80 as well since the Parallel Page
# Engine will make connection requests to Port 80 to request the
# portlets.
NameVirtualHost <machine ip>:80
<VirtualHost <nameofmachine>:80>
ServerName login.<company>.com.au
Port 80
<VirtualHost>
Note that I used slightly different names for the url's rather than the oracle names www.oracle.com and server.oracle.com
Now after applying this, I noticed not only could I not go to the oiddas from the original machine name, but also couldnt go there from the new machine name.
Also I was not even able to go to the standard index page whereby you can go to the enterprise manager for the application server, from either names.
The following urls provide me with "The Page Cannot Be Displayed" error message:
http://login.<company>.com.au:7777/
http://<nameofmachine>:7777/
The following urls provide me with "Page Under Construction" error message:
http://login.<company>.com.au/
http://<nameofmachine>/
Could someone please tell me why this is the case, considering I am using the installation procedures Oracle has published within the Oracle Http Server Admistrators Guide (http://download-west.oracle.com/docs/cd/B14099_19/web.1012/b14007/netconf.htm#sthref379).
Cheers
Rodney

Hi Rondey,
Ik think that I can see your probleem.
Just change the following line at your httpd.conf, then restart the component.
First of all if the port is installed with nr. 7777. then the listen process will be on port 7778
the second thing is just try to do the following steps
((Port 80 to Port 7777)))
Listen 7778
%%%% In loadbalancer section %%%%%%
just add the following lines
Listen 80
Listen 8103
Listen 8102
NameVirtualHost *
NameVirtualHost *:8103 or 80
If you want to use this ports (8103 or 8102) for other site (url), then
<VirtualHost *:80>
ServerName <machine ip> or (host name)
Hear from U,
Regards,
Hamdy

Trying to configure a Win 2003 Server to use TLS server authentication . . .

I am trying to
configure a Win 2003 Server to use TLS server authentication following Method 2 in KB 895443 - see below:-
Method 2: By using the Certificate Request Wizard
The following steps describe how to obtain a certificate from a Windows Server 2003 Certification Authority. You can also request a certificate from a Windows 2000
Certification Authority. Additionally, you must have Read permissions and Enroll permissions on the certificate template file to successfully request a certificate. Use this method if one or more of the following conditions are true:
You want to request a certificate from an Enterprise Certification Authority.
You want to request a certificate that is based on a template where the subject name is generated by Windows.
You want to obtain a certificate that does not require administrator approval before the certificate is issued.
To obtain a certificate, follow these steps:
Click Start, click Run, type mmc, and then click OK.
On the File menu, click Add/Remove Snap-in.
Click Add, click Certificates, and then click Add.
Click Computer account, and then click Next.
If you want to add a certificate to the local computer, click Local computer. If you want to add a certificate to a remote computer, click Another
computer, and then type the name of that remote computer in the Another computer box.
Click Finish.
In the Add Standalone Snap-in dialog box, click Close, and then click OK in the Add/Remove
Snap-in dialog box.
Under Console Root, click Certificates (Local Computer).
Note If you configured the Certificates MMC snap-in to manage a remote computer, click Certificates (servername)instead of Certificates (Local Computer).
On the View menu, click Options.
In the View Options dialog box, click Certificate purpose, and then click OK.
In the right pane, right-click Server Authentication, point to All Tasks, and then click Request New Certificate.
In the Certificate Request Wizard that starts, click Next.
In the Certificate types list, click Server Authentication, click to select the Advanced check box,
and then click Next.
In the Cryptographic Service Providers list, click Microsoft RSA SChannel Cryptographic Provider.
I get as far as step 11 and I get the error message:-
The wizard cannot be started because of one or more of the following conditions:
- There are no trusted certification authorities (CAs) available.
- You do not have the permissions to request certificates from the available CAs.
- The available CAs issue certificates for which you do not have permissions.
This is covered in KB 927066 – see below:-
To resolve the problem, follow these steps:
Verify that the CERTSVC_DCOM_ACCESS group exists in the domain that hosts the certification authority. This group is in the CN=Users container.
To do this, follow these steps:
Click Start, click Run,
type Dsa.msc, and then click OK.
In the left pane, click the Users container.
Verify that the CERTSVC_DCOM_ACCESS group is in the right
pane. If the CERTSVC_DCOM_ACCESS group is not in the right pane, go to step 4.
Verify that the CERTSVC_DCOM_ACCESS group includes the following member groups:
Domain Users
Domain Computers
If these member groups do not exist in the CERTSVC_DCOM_ACCESS group, go to step 4.
Note If users or computers in other domains need to enroll against the certification authority, you must also add those users and computers to the CERTSVC_DCOM_ACCESS group. If the current problem occurs on a domain
controller, you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group. By default, domain controllers are not members of the Domain Computers global group. Therefore, domain controllers
do not have sufficient DCOM permissions.
Verify that the CERTSVC_DCOM_ACCESS group has the appropriate DCOM Access permissions and DCOM Launch and Activation permissions on the computer that hosts the certification
authority.
Click Start, point to Program,
point to Administrative Tools, and then click Component Services.
Expand the Component Services node.
Expand the Computers node.
Right-click the My Computer node, and
then click Properties.
Click the COM Security tab.
Under Access Permission, click Edit
Limits.
Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Access and Allow
Remote Access permissions, and then click Cancel.
Under Launch and Activation Permissions, click Edit
Limits.
Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Activation and Allow
Remote Activationpermissions, and then click Cancel.
Click Cancel, and then close the Component
Services console.
Settings may be incorrect if any one of the following conditions is true:
The CERTSVC_DCOM_ACCESS group does not exist.
The default membership of the CERTSVC_DCOM_ACCESS group is incorrect.
The CERTSVC_DCOM_ACCESS group does not have the correct permissions.
If any one setting is incorrect, run the following commands at a command prompt. Press ENTER after each command.
certutil -setreg SetupStatus -SETUP_DCOM_SECURITY_UPDATED_FLAG
net stop certsvc
net start certsvc
Repeat steps 1 through 3 to verify that all the settings are correct.
Note If the changes affect the group membership of the certification authority server, you must restart the server for the changes to take effect.
The only part of the above instructions which I have not been able to complete is:-
“you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group”.
When I click on the CERTSVC_DCOM_ACCESS user then click the Members tab & go to add Enterprise Domain Controllers the option is not there.

Hi Nick,
Have you successfully set up an enterprise CA?
If yes, is the enterprise CA’s certificate located under the Trusted Root Certification Authorities store?
Best Regards,
Amy

Using script to automatically arrange timeline and sceneline workspaces.

This is a simple demonstration of using VB Script to adjust panels in PE3.
In PE3, when you adjust the height of the timeline, the height of the sceneline is also adjusted the same amount, and vice versa. You could use script to automatically adjust the height of the sceneline or the timeline whenever you switch respective modes. The script below does that.
This is for those who are familiar with script writing and the Windows Script Host. The vb script below includes properties and methods from the AutoItX library (free download).
Option Explicit
Dim oAutoit, strWinText, strLastTime, lngX, lngY
Set oAutoIt = WScript.CreateObject("AutoItX3.Control")
oAutoit.WinWaitActive "Adobe Premiere Elements -"
strLastTime = "start"
Do
' Quit the script if mousepointer put in upper left corner (0,0).
lngX = oAutoIt.MouseGetPosX
lngY = oAutoIt.MouseGetPosY
if lngX = 0 and lngY = 0 then
set oAutoIt = nothing
Wscript.Echo "Your script has ended."
Wscript.Quit
end if
' Read the text of the window so we can determine the workspace setup.
strWinText = oAutoIt.WinGetText("Adobe Premiere Elements -")
' If DVD Menu tab selected, then don't do anything, otherwise
' check if in Sceneline or Timeline mode.
if instr(strWinText, "DVD Menu") = 0 then
if instr(strWinText,"EditTimeControl") <> 0 then
if strLastTime <> "timeline" then
' Reset the Edit Workspace and then adjust the timeline panel height
oAutoit.Send "{alt}wke"
oAutoit.Sleep 250
oAutoit.MouseMove 1078, 646
oAutoit.MouseDown "left"
oAutoit.MouseMove 1078,400
oAutoit.MouseUp "left"
strLastTime = "timeline"
end if
else
if strLastTime <> "sceneline" then
' Reset the Edit Workspace and then adjust the sceneline panel height.
oAutoit.Send "{alt}wke"
oAutoit.Sleep 250
oAutoit.MouseMove 1078, 646
oAutoit.MouseDown "left"
oAutoit.MouseMove 1078,762
oAutoit.MouseUp "left"
strLastTime = "sceneline"
end if
end if
end if
WScript.Sleep 2000
loop
The script might work as-is if your screen is set for 1280 x 1024 and the Premiere Elements 3 window is maximized. Save the script in a text file with a .VBS extension, and then run it. Afterwards click on the Sceneline or Timeline buttons in PE3. It may take up to 2 seconds before the mouse starts moving on it's own. The screen coordinates were ascertained using the AutoIt Info tool.

You shouldn't make assumptions about what the names of the volumes are - both the Finder and System Events have terminology to determine if a disk is the startup volume (or a local volume, for that matter), for example:
tell application "System Events"
repeat with someDisk in (get disks whose startup is false and local volume is true)
set someDisk to POSIX path of someDisk
do shell script "diskutil umount " & quoted form of someDisk & " &> /dev/null &"
end repeat
end tell
Note that if you are unmounting a disk from a standard account you will be prompted for administrator authentication.

Using Scripts in Oracle Weblogic Server

Hello friends,
I have a query in which I need to use scripts:
setWLSEnv.sh? or setDomainEnv.sh?
Thanks

It depends what you want to do with WebLogic - they can serve different purposes.
If you want to run WLST scripts against a domain, use setDomainEnv.sh/cmd
If you want to run scripts against the ORACLE_HOME of WebLogic, use setWLSEnv.sh/cmd.
Thank you,
Gavin

Automate cf mx 7 server configuration using scripts?

Similar Messages

Maybe you are looking for