Issues with part appraiser

Hi,
I am using part appraisers during " In Planning " and "in Process" status. The process is working absolutely fine when the document is in "in process". However, when the document is in planning status it does not come into part appraiser's queue. I am unable to see the appraisal document under both ESS or MSS.
I have maintained the owner of the substatus as Part appraiser and using PAPP column for part appraisal. When the status is in process and substatus Part appraiser in process the document is available under ESS.
I have the following questions :
1. Why is the document not avaiable for part appraiser when it is in planning?
2. When document is in Process the part appraiser can view the document in ESS. Why not in MSS?
3. there is a button called setstatus in process status. But this button is not available during In planning or any other sub status. Whats the significance of this ?
Looking forward for your answers.
Regards,
Priya

Hi F S,
I am facing the same issue, Could you please let me know how you resolved it. Thanks!!!
Raj

Similar Messages

Issue with part delivery of orders containing payment card lines

We have a problem with part deliveries of orders containing payment card authorizations.
Our customers can buy items in our webshop paying with credit cards. The webshop is connected to our payment service provider who authorizes the complete amount of each order. The order data including authorization data is transferred from the webshop to our SAP ERP (ECC 5.0), where order documents are created, delivered and billed.
For example, an order was created with 3 items:
A for 5 u20AC
B for 10 u20AC
C for 20 u20AC
For now, we create 3 payment card authorization lines according to those items.
Line 1 5 u20AC
Line 2 10 u20AC
Line 3 20 u20AC
Item C is temporarily not available, item A and B can be delivered and billed. The system now takes authorization line 3 (as 5 u20AC + 10 u20AC = 15 u20AC < 20 u20AC) for the first billing. The authorized amount of this line is completely consumed.
When item C becomes available and is delivered and billed, the creation of the FI-document fails because there isn't enough authorization amount left.
The creation of 3 payment card authorization lines is not mandatory for our business, creating one line for the complete amount would be as fine. But how can we avoid the complete comsumption of the authorization line then? Or do you have any other suggestions / best practices how to deal with part deliveries of orders containing payment card authorizations?
Regards.
Hilka Kaminski-Nieswandt
Sabrina Förster

Hello fridaynights,
It would be worrisome to receive an email notification that we were unable to authorize your payment method, especially if the payment method appears to be fine on your end.
Generally speaking, when items ship separately from one order, we will authorize the full amount of the order when the order is placed. Authorizations may expire after a few business days, but as items ship individually, your card would be authorized and charged for the individual shipments.
Using the email address you registered with the forum, I was able to locate your order with the canceled amiibos. It would appear that we were unsuccessful in authorizing funds on the card on multiple occasions, and so the remaining amiibos were canceled. I apologize for any trouble or displeasure that this cancelation may cause you. I would encourage you to keep an eye on these amiibos on BestBuy.com for changes in their availability.
As it seems there was an issue with your My Best Buy MasterCard, I would encourage you to contact Citibank, the issuer of your My Best Buy MasterCard account, at 1-888-574-1301 for further inquiries into this authorization issue.
If you should need further assistance, please let me know.
Regards,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

Issue with parts of a form that repeat with a button

I have added several parts to a form that a user can click to add a new item. The parts are tables that have rows that repeat that are added by clicking a button. This addition of rows works fine. However I am having two issues that I need some assistance with....
1. I have added a table nested within a table. Rows added as a user clicks to add a row. This works fine up to eight rows. Rows beyond eight do not flow to the next page. They seem to be added at the bottom of the second page of added rows (can't see them to know if they adding).
2. The same table, when adding rows, creates rows over a separate table below it. I am not sure why the next table does not get pushed down by adding rows to the table above it.
I am a LiveCycle newbie so any help would be greatly appreciated.
Thanks.
Shane

The subform is not Flowed in the form.. Select the root node (for Example Page1) in the Heirarchy and set the Type to Flowed to address both the issues.
If your Table is wrapped in a Subform, make sure for the Subform you have checked the "Expand to Fit" for Height in the Layout tab.
Thanks
Srini

I am having issues with parts of my Facebook news page not showing and games not running.

For the last three days, I have been having issues running Facebook on Firefox. First, the side panels on the news page are not showing, which means I cannot connect to games like Farmville or Bejeweled Blitz. Those side panels were showing the previous two days, but when trying to connect, I had a message about the secure setting and I would get the message "you are no longer logged onto FB, connect to FB to play".

Try clearing cache and cookies. Next make sure your plug-ins are up to date. If both do not resolve you issue try [[Safe mode]]
If you issue is resolved by this post please click Solved it! so we can assist others.

Part Appraisal - can not show 'note' box

Good evening experts,
That may be a very simple question but i didn't manage to figure out why i couldn't find the solution.
I'm developing an appraisal template with part-appraisal and final-appraisal. Some criteria group and/or criteria need a 'note' box (eventually with draft) for both part appraisers and final appraisers. The note text box appears fine for the final appraiser but it doesn't for the part appraisers, whatever the config i do on the column access, element access, etc....seems pretty simple though :o(
Anyone who has done this ? We're running ECC 6.00 with Enhancement Package 2005.1.
Thanks in advance !
Sylvain.

Hi Sylvain ,
This is not to answer your query but another question.
I am too trying to implement Part Appraisers in Appraisal Process but not getting it done.
When Part Appraiser try to change document from his user id the Document doesn't open up in change mode and also the relevant push Button is mising .
Can you tell me when are the Part Appraisers added and if I am missing some basic thing for this.
It will be of great help .
Thanks
Sudarshan

Issue with the presence indicator in list/library web part.

When viewing a user field (Created By, Modified By or a custom People column) through the list web part (either through the default page /Forms/AllItems.aspx or a custom web part page using a list/library) the presence indicator always says presence unknown.
However if I go to the Site Permissions on the same site, or My Site or a custom page using a modified core search results web part I wrote the presence indicator works fine. I can't find any errors being reported on the server.
Looking at the rendered code the list web part generates:
<IMG name=imnmark width=12 height=12 title="" class=ms-imnImg id=imn_48683,type=smtp alt="No presence information" src="/_layouts/images/blank.gif" border=0 sip="[email protected]">
Locations where the presence indicator works the code is:
<IMG name=imnmark width=12 height=12 title="" class=ms-imnImg id=imn{20140822-1752-098D-8C11-188AD0B8B8B6},type=sip alt=Available src="http://portal.mydomain.com/_layouts/images/imnon.png" border=0 sip="[email protected]" valign="middle">
It appears that the List web part is not detecting that the users have a sip address and they appear to be rendered using smtp instead. It's also odd that the list web part is pulling the correct sip address while the one that works is pulling the
email address, not the sip address stored in the user profile. I spent considerable time going through the xslt to try and figure how the tag is rendered but I haven't been able to figure it out.
We are using Cisco Jabber 9.2.3 for IM, I don't know if that should make a difference or not. It's working fine in other parts of SharePoint and in Outlook. Running SharePoint Dec 2011 CU (14.0.6114.5000) with MS Office 2010 SP2 installed on the client. Tested
in IE 9.0/10/11.
Any ideas?

We don't have a Lync server and I don't have the software available. Are you saying just having Lync installed even though it won't work might help?
I did some more digging and believe that this is an issue with the XsltListViewWebPart. If I go to the UserInformationList the web part used to render the list is the ListViewWebPart and the presence indicator works there. Also our environment
was migrated from 2007 and there are a number of pages that are using the old ListViewWebPart and the presence indicator works fine in this part. If edit the page and add the same list library to it, it's added as a XsltListViewWebPart and the presence
indicator does not work.
The presence control is not rendered by the xsl files used by the webpart. I modified the xsl to display the raw xml and the html code for the presence is part of the xml. I'm guessing this can't be changed and is part of how SharePoint is rendering
the data for the XsltListViewWebPart. You can see the Editor and CheckoutUser lines have the html code embedded in the data.
<Row
ID="60"
PermMask="0x7fffffffffffffff"
HTML_x0020_File_x0020_Type=""
File_x0020_Type="xlsx"
HTML_x0020_File_x0020_Type.File_x0020_Type.mapall="icxlsx.png|Microsoft Excel|SharePoint.OpenDocuments"
HTML_x0020_File_x0020_Type.File_x0020_Type.mapcon="SharePoint.OpenDocuments"
HTML_x0020_File_x0020_Type.File_x0020_Type.mapico="icxlsx.png"
serverurl.progid="1http://myparkersdev.domain.com/sites/BPIT/_layouts/xlviewer.aspx?id=/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx"
ile_x0020_Type.progid="SharePoint.OpenDocuments.3"
File_x0020_Type.url="FALSE"
FSObjType="0"
FileRef="/sites/BPIT/Shared Documents/Database Sizes.xlsx"
FileRef.urlencode="%2Fsites%2FBPIT%2FShared%20Documents%2FDatabase%20Sizes%2Exlsx"
FileRef.urlencodeasurl="/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx"
FileLeafRef="Database Sizes.xlsx"
FileLeafRef.Name="Database Sizes"
FileLeafRef.Suffix="xlsx"
CheckoutUser="<a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'><img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_77,type=smtp'/></a><a onclick="GoToLink(this);return false;" href="/sites/BPIT/_layouts/userdisp.aspx?ID=526">Ian Howe</a>"
CheckoutUser.id="526"
CheckoutUser.title="Ian Howe"
CheckoutUser.span="<a onclick="GoToLink(this);return false;" href="/sites/BPIT/_layouts/userdisp.aspx?ID=526">Ian Howe</a><img border="0" height="1" width="3" src="/_layouts/images/blank.gif"/><a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'><img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_78,type=smtp'/></a>"
CheckedOutUserId="526"
IsCheckedoutToLocal="0"
Created_x0020_Date="0;#2014-08-22 09:47:01"
Created_x0020_Date.ifnew=""
ContentTypeId="0x0101000AE0EC76CD0DB743B42D2FE022EAA6DC"
Modified="8/22/2014 10:51 AM"
Editor="<a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'><img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_79,type=smtp'/></a><a onclick="GoToLink(this);return false;" href="/sites/BPIT/_layouts/userdisp.aspx?ID=526">Ian Howe</a>"
Editor.id="526"
Editor.title="Ian Howe"
Editor.span="<a onclick="GoToLink(this);return false;" href="/sites/BPIT/_layouts/userdisp.aspx?ID=526">Ian Howe</a><img border="0" height="1" width="3" src="/_layouts/images/blank.gif"/><a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'><img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_80,type=smtp'/></a>"
ecb.dispex="return DispEx(this,event,'TRUE','FALSE','FALSE','SharePoint.OpenDocuments.3','0','SharePoint.OpenDocuments','','1http://myparkersdev.domain.com/sites/BPIT/_layouts/xlviewer.aspx?id=/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx','526','526','1','0','0x7fffffffffffffff','','')" />
I just find it strange that the old ListViewWebPart works. Our SP environment has not been patched to the latest version, I'll try that next and see if it makes a difference.

I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

Hi An Iphone user,
If you are having issues deleting a specific message from an iMessage conversation (not seeing the Trash icon), you may want to double-check that you are following the steps outlined in the following article:
How do I delete a message?
To delete a message, tap and hold the message bubble, then tap More.
Tap Delete All to delete all the messages. Or tap to select the messages you want to delete, then tap .
After you delete a message, you can recover it only by restoring from a backup.
Send messages with your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

Issue with web part connections : won't display data when the lookup field is a calculated field

Hello,
I have a list A with a calculated field named A.A. I have a list B that has a lookup field to list A, to field A.A, named B.A. I add the two lists in a wiki page and I try to connect them - I.E., select a row from A and the rows from B would be automatically
filtered.
The B\Connections\get filtered values from A and select Provider:A.A, Consumer B.A doesn't bring any results. If I do the exact opposite: A\Connections\get filtered values from B and select Provider:B.A, Consumer A.A works fine. But, this is not what
I want.
If the A.A isn't calculated field, everything works fine. So, it looks like there's an issue with calculated fields acting as consumers.
Is this a known issue and are there any know workarounds? A workaround is to abandon calculated field and use sharepoint designer workflow.
Thank you
Christos

Hi,
According to your post, my understanding is that you had issues about connecting web parts.
I try to reproduce the issue, however, everything works well.
Create a custom list named List A, add a caculated column named A.A(Formula: =Title).
Create a custom list named List B, add a lookup column named B.A(List A: A.A).
Create a page and then insert the two list view web parts.
Edit page, select List B->Connections->Get Filtered Values From List A.
Then I can filter the List B.
I recommend to create another caculated column and get filter value form it to check whether it works.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Part 2: Flat files and Business Contents: Any issues with this scenario?

I will appreciate some clarification on the some points made in response to my previous post "Flat files and Business Contents: Any issues with this scenario?"
1.
" ...youd better analyze those cubes for data redundancy and presence of data youll never use. " I will appreciate some clarification on the type of analysis you are referring to. Examples will help.
2.
"If you want to combine several found IOs in your custom dataprovider, then again you must know (or figure out) relationships between these IOs." I will appreciate some clarification on the type of relationship you are referring to. Examples will help.
3.
I am a bit confused with "..include into ODS structure ALL fields required for the cube" but you also noted noted that "...except navigational attributes and chars and KFs that are going to be determined in TRs or URs."
If you exclude ALL these, haven't you excluded all the fields you included in the ODS structure?
4.
"Consider carefully the ODS key fields selection. Their combination should not allow data aggregation that you dont need."
I may be missing the point here, I understand that you need to select the fields which will form the unique ID for the records in the ODS under the Key Field (please correct me if I am wrong with the purpose of the Key Field), but I don't understand the discussion of "aggregation" in the context.
Thanks in advance

Hallo
I try to give some exaplanation based on the previous answer.
1. Data redundancy - make sure you do not store the same information. does not make sense to have data redundanty across you Data Warehouse. this is also a cost. just sotre the same information one time if you get all what you need.
2. whatwhever you build you dp, which consist of IO, you need to know with kind of relation (1:1 or 1:n - n:n and so on) exist between them. that will help you when you model you infoprovider. For example I would never pit togheter IO (n:m) in the same dimension if you expect an high number of cardinality. Sometime an IO can be an attribute of another one (depend on relation. For example
Business Partner and his Address. Usually you have a relation 1:1, in this case address is an attribute of BParten and store it in the Masterdata instead then DP
3. Sometime when you load from ODS to CUBE, you can fill some IO (which are in the infocube and not in the ODS)through ABAP routine in TR-Start Routine of Update Rule. Does not make sense to include these IO in the ODS as they are NULL or Blank (the deault value). This can happen when for example, you first load in the ODS (Price and Quantity) and then you calculate Sell price later (Price * Quantity). of course it could be doen also in the Bex. Depends on other factors (Performance - Loaidng -Sizing)
4. Make sure that the KEY definition of ODS is accordingly to the data otherwise you will aggregate the data and later maybe if you need the detail you miss it.
for example: customer - product - Distr Chan - Sell Price
if each Customer can buy each product for any Distrution Channel, then when you build your ODS(Customer - Product and Distribution must be KEY) otherwise (if you have only Customer - Product KEY for example) you will lose the details for Distribution Channel.
I hope eveyrhting is clear
Regards
Mike

Performance Appraisal-Issue with Restrcited template

Hello
I am trying to prepare appraisal document via tcode PHAP_PREPARE_PA. The system proposes three options:
- Prepare Appraisal Docs with Template, Appraiser, Appraisee
- Prepare Appraisal Docs with Organizational Units
- Prepare Appraisal Docs with Restricted Templates
Questions:
Q1 What is the difference between 2 and 3 above?
Q2 Is there any documentation that explains each option in detail?
Q3 Is there a place where we configure the evaluation path each option takes?
Q4 When I use the option "Prepare Appraisal Docs with Restricted Templates" and select the org unit/appraisal template, I get the following message:
Object 01 VA 99912314 not found
Message no. HRHAP00_TEMPLATE007
What am I missing? Your timely assistance would be immensely helpful.
Many thanks in advance,

Q 1 & Q 2 :
From SAP Help -
Prepare appraisal documents using wizard (Template,Appraiser, Appraisee)
The wizard enables you to prepare appraisal documents for different appraiser/appraisee combinations (such as manager appraises employee).
1.      Call the Prepare Appraisal Documents transaction.
2.      Click on the Prepare Appraisal Documents with Template, Apper, Appee link.
3.      The wizard is started and it guides you through all the steps you need to prepare appraisal documents with the appropriate appraiser/appraisee combinations.
Prepare appraisal documents using organizational units
This link enables you to prepare appraisal documents using your organizational units.
1.      Click on the Prepare Appraisal Documents Using Organizational Units link.
2.      In the Root Object ID field, choose an organizational unit from input help and transfer it.
3.      In the Appraisal Template field, choose the appraisal template you want to use from input help.
4.      Enter a start and end date for the validity period.
5.      Select the Test Run checkbox if you want to create appraisal documents in test mode. In this case, no appraisal documents are created in the database.
6.      Choose Execute.
Prepare appraisal documents with restricted templates
This link provides you with the following options:
¡        You can restrict the selection of appraisal templates to include particular employee groups only
If it is known for which employees appraisal documents are to be prepared, you can use an employee attribute such as an employee's Job to restrict the number of appraisal templates offered for selection.
¡        You can restrict the selection of employees depending on the appraisal template.
If it is not known for which employee the appraisal document is to be prepared, the appraisal template is offered first. Input help restricts the employees available for selection to include only those employees who, on account of their employee attributes, can be considered for the appraisal template.
       1.      Click on the Prepare Appraisal Documents Using Restricted Templates link.
       2.      Select the required organizational unit from input help for the Root Object field. Transfer this organizational unit.
       3.      Select the appraisal template you require.
       4.      Enter a validity period.
       5.      Select the Test Run checkbox if you want to create appraisal documents in test mode. In this case, no appraisal documents are created in the database.
       6.      Choose Execute.
http://help.sap.com/saphelp_erp2005vp/helpdata/EN/98/1222d3404e3849912015524dce03e5/frameset.htm
Reward points if this helps.
Sanghamitra

Since Nov 11 we have very big issues with our emails received via exchange server. Part of them are empty

Since Nov 11 all Iphone and Ipad of our company have very big issues with email synchronization. We all synchronized with Exchange server.
In the past nobaody had issue.
Some of our users have IOS 6 and others IOS 5
Messages arrived empty and it is impossible to download them.
Nobody is able to answer ????
I have the same issue with my personnal Ipad synchronized with exchange also.

This resolution have to attend at the server not with the ios device. My employer's mail administrator reject me to correct it from the server. As his concern is, if ither ios devices works why don't mine? So I am helpless than changing my iphone. It works fine for early versions of ios and with androids. And also one of my friends iphone4 with ios 7 (similar as mine) works too. So I guess it's something wrong with my iPhones settings. But basic question I cannot understand is it works in my phone before this ios7 upgrading. And currently working with my yahoo account too. Favourable reply expected.

Part Appraiser Column in R/3 - not visible

Hello,
I'm facing trouble in getting the Part Appraiser column in OSA document within R/3. I've configured Appr. template with FAPP column with access to change for the Part Appraiser. Also the elements - Objectives are given individual access to the Part Apprsr.
I'm suspecting if there is an authorization issue here. I'm using SAP_ALL access for testing purposes and still cant view the details in the Appraisal Document.
Can you give me some direction on this please.
I thank you.
Regards,
Sandeep

Ok, this is the scenario.
Part appraiser is the manager itself. It's basically been setup to achieve the mid year review. So its the same manager doing the Mid/Yearly review.
Now, when Mgr logs in, he is able to maintain the weightages and Final Appraisal columns. Mgr login is not able to see Part appraiser columns in editable.
We are on ECC6.
Thanks Sameer for looking into this.
Regards,
Sandeep

Copy rating in Part appraisal.

Hi All,
I am having below requirement for part appraisal.
If first reviewer complete the process after giving the rating, I want when second reviewer open the template for review, it should be populate with the rating given by the previous reviewer .i.e. rating should be copy from one reviewer to another reviewer.
Please help me to find out some solution for the above requirement.
Thanks
Piyush Mathur
Edited by: piyush mathur on Jan 6, 2009 2:02 PM

For others who may run into similar issue :
Per reply from SAP in OSS message, applied note 967634 that resolved the issue.
Sridhar

Issue with xsd Data type mapping for collection of user defined data type

Hi,
I am facing a issue with wsdl for xsd mapping for collection of user defined data type.
Here is the code snippet.
sample.java
@WebMethod
public QueryPageOutput AccountQue(QueryPageInput qpInput)
public class QueryPageInput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class QueryPageOutput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class Account_IO implements Serializable, Cloneable {
protected ArrayList <AccountIC> fintObjInst = null;
public ArrayList<AccountIC>getfintObjInst()
return (ArrayList<AccountIC>)fintObjInst.clone();
public void setfintObjInst(AccountIC val)
fintObjInst = new ArrayList<AccountIC>();
fintObjInst.add(val);
Public class AccountIC
protected String Name;
protected String Desc;
public String getName()
return Name;
public void setName(String name)
Name = name;
For the sample.java code, the wsdl generated is as below:
<?xml version="1.0" encoding="UTF-8" ?>
<wsdl:definitions
name="SimpleService"
targetNamespace="http://example.org"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
>
<wsdl:types>
<xs:schema version="1.0" targetNamespace="http://examples.org" xmlns:ns1="http://example.org/types"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://example.org/types"/>
<xs:element name="AccountWSService" type="ns1:accountEMRIO"/>
</xs:schema>
<xs:schema version="1.0" targetNamespace="http://example.org/types" xmlns:ns1="http://examples.org"
xmlns:tns="http://example.org/types" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://examples.org"/>
<xs:complexType name="queryPageOutput">
<xs:sequence>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="accountEMRIO">
<xs:sequence>
<xs:element name="fIntObjectFormat" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageType" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageId" type="xs:string" minOccurs="0"/>
<xs:element name="fIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fOutputIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fintObjInst" type="xs:anyType" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="queryPageInput">
<xs:sequence>
<xs:element name="fPageSize" type="xs:string" minOccurs="0"/>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
<xs:element name="fStartRowNum" type="xs:string" minOccurs="0"/>
<xs:element name="fViewMode" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://example.org" xmlns:ns1="http://example.org/types">
<import namespace="http://example.org/types"/>
<xsd:complexType name="AccountQue">
<xsd:sequence>
<xsd:element name="arg0" type="ns1:queryPageInput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQue" type="tns:AccountQue"/>
<xsd:complexType name="AccountQueResponse">
<xsd:sequence>
<xsd:element name="return" type="ns1:queryPageOutput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQueResponse" type="tns:AccountQueResponse"/>
</schema>
</wsdl:types>
<wsdl:message name="AccountQueInput">
<wsdl:part name="parameters" element="tns:AccountQue"/>
</wsdl:message>
<wsdl:message name="AccountQueOutput">
<wsdl:part name="parameters" element="tns:AccountQueResponse"/>
</wsdl:message>
<wsdl:portType name="SimpleService">
<wsdl:operation name="AccountQue">
<wsdl:input message="tns:AccountQueInput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
<wsdl:output message="tns:AccountQueOutput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SimpleServiceSoapHttp" type="tns:SimpleService">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="AccountQue">
<soap:operation soapAction=""/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SimpleService">
<wsdl:port name="SimpleServicePort" binding="tns:SimpleServiceSoapHttp">
<soap:address location="http://localhost:7101/WS-Project1-context-root/SimpleServicePort"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
In the above wsdl the collection of fintObjInst if of type xs:anytype. From the wsdl, I do not see the xsd mapping for AccountIC which includes Name and Desc. Due to which, when invoking the web service from a different client like c#(by creating proxy business service), I am unable to set the parameters for AccountIC. I am using JAX-WS stack and WLS 10.3. I have already looked at blog http://weblogs.java.net/blog/kohlert/archive/2006/10/jaxws_and_type.html but unable to solve this issue. However, at run time using a tool like SoapUI, when this wsdl is imported, I am able to see all the params related to AccountIC class.
Can some one help me with this.
Thanks,
Sudha.

Did you try adding the the XmlSeeAlso annotation to the webservice
@XmlSeeAlso({<package.name>.AccountIC.class})
This will add the schema for the data type (AccountIC) to the WSDL.
Hope this helps.
-Ajay

Issue with filename in gui_download fn module

Hi,
i have an issue with the filename of text file that was dowloaded using gui_download fn module.
PARAMETERS : p_file TYPE rlgrap-filename.
CONCATENATE s_laufd-low6(2) s_laufd-low4(2) INTO gv_dt.
CONCATENATE 'HINL' gv_dt '.001' INTO p_file.
START-OF-SELECTION.
DATA: v_file TYPE string.
v_file = p_file.
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 filename = v_file
 filetype = 'ASC'
 append = 'X'
 TABLES
 data_tab = it_tab[]
 EXCEPTIONS
 file_write_error = 1
 no_batch = 2
 gui_refuse_filetransfer = 3
 invalid_type = 4
 no_authority = 5
 unknown_error = 6
 header_not_allowed = 7
 separator_not_allowed = 8
 filesize_not_allowed = 9
 header_too_long = 10
 dp_error_create = 11
 dp_error_send = 12
 dp_error_write = 13
 unknown_dp_error = 14
 access_denied = 15
 dp_out_of_memory = 16
 disk_full = 17
 dp_timeout = 18
 file_not_found = 19
 dataprovider_exception = 20
 control_flush_error = 21
 OTHERS = 22.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
data is downloaded into the textfile with filename as HINL2411 truncating the decimal part.
How can i get the filename along with the decimal part as HINL2411.001.
Thanks

Hi ,
Declare p_file as TYPE string

Issues with part appraiser

Similar Messages

Maybe you are looking for