ISU - EAMACB transaction - Consumption History for Invoicing Line

Hello,
I'm on an EDF project using IS-U module.
I would like to find a solution in order to calculate History consumption for an installation.
I found EAMACB transaction which could calculate my history consumption.
After researches, it seems that a customizing is necessary to use this mass transaction :
SPRO transaction :
SAP utilities \ Contract Billing \ Billing Execution \ Structure of Consumption History \ Define Bill Line Determination
Is anybody known this EAMACB mass transaction and how to use it ?
Thank you very much for your help.
Best regards
Julien SCHRAPP
EDF SIMM Project

Similar Messages

GOODS MOVEMENT HISTORY FOR INVOICE REGISTRATION

Hi all,
I use the BAPI BAPI_INCOMINGINVOICE_CREATE to register invoices.
The BAPI wants as input parameter the list of goods movement.
Thus, I need a remote component (BAPI, RFC, Function Module, etc.) to get the goods movement history for a certain purchase order.
Note that I do NOT need the goods movement (BAPI BAPI_GOODSMVT_GETDETAIL).
I need a component with the same behaviour of the MIRO transaction, which displays, for a certain Purchase Order, the goods movements "available for invoice registration".
Thank you very much in advance.
Mauro
Message was edited by: Mauro De Santis

Message was edited by: Mauro De Santis

Can we make use of Transaction code FKMT for vendor line items

Hi
Please advise me whether we can make use of Transaction code FKMT (Account assignment model) for vendor line items as follows:
For Example:
Expenditure Account      Dr.       Rs.1000
         To Vendor A                                      Rs.100
         To Vendor B                                      Rs.100
         To Vendor C                                      Rs.100
          To Vendor D                                      Rs.700
Also please advise me what to give parameters
Thanks and Best Regards
Shekhar
Edited by: Shekhar Yecham on Sep 19, 2008 7:05 AM
Edited by: Shekhar Yecham on Sep 19, 2008 7:10 AM

Dear Kulakarni,
I found few of my fields in 0FI_AP_4.I did n't find few fields can i enhance the Datasourse.
What is the respective Cube for that Datasourse.
I check 0AP_30,but in Business Content that cube is not available.
Could you please give me guidance.
Thanks in Advance,
Srinivasan.

PAAPINVW -- how to fetch values for invoice line level details

My requirement is such that we define one of our account segments at invoice line dff's while creating the invoice against a project. So the ccid would need to driven from this invoice line dff, to be complete and valid.
Project Supplier Invoice Account Generator (PAAPINVW) has already defined attributes for Invoice Header DFF's and Invoice Distribution level DFF's; but Invoice line level DFF's have not been defined.
Also there are no attributes that would help me query the invoice line to fetch these details.
Working on this workflow in R12. Has anyone tried to fetch any sort of details from invoice lines, using any existing attributes in PAAPINVW; or has anyone done something in accordance to this??
Looking for suggestions.. have anyone faced a similar situation before??

Hi user;
Pelase check below note cause and solution part please,which at least can gives u some ideas
Projects Supplier Invoice Account Generation Error: APP-SQLAP-97734: The System Cannot Generate Distributions [ID 823787.1]Regard
Regard
Helios

Carriage Return in line Text for invoice line item.

Hi,
I am trying to create an non PO invoice through calling a BAPI "BAPI_INVOICE_CREATE"
in which i am passing all the required data . I have a field called "SGTXT" which is item text and i am passing this field
which has maximum length of 50 char i just want to add a new line characters on to it. i.e want to support Carriage Return
just want to know whether it can hold Carrige Return.
I just tried by entering some Characters and hitting Enter the value which i am passing is simillar to
itemtext
"abcdabcdabcdabcd#
abacdabcdabcd#
abcdabcd"   My program is not able to parse this values hence landing into dump.
How should i support this scenario.
Thanks,

Here is the dump.
The termination occurred in the ABAP program "SAPLZIBA_SSP_READ_CSV" in
"LINE_TO_CELL_ESC_SEP".
The main program was "ZIBA_SSP_INVOICELOAD ".
The termination occurred in line 149 of the source code of the (Include)
program "LZIBA_SSP_READ_CSVF01"
of the source code of program "LZIBA_SSP_READ_CSVF01" (when calling the
editor 1490).
        IF i_string CS l_pipe.
          l_stringlength = strlen( i_string ).
          DO l_stringlength TIMES.
            REPLACE ' ' WITH '""' INTO i_string.
            IF sy-subrc NE 0.
              EXIT.
            ENDIF.
          ENDDO.
        ENDIF.
        ASSIGN I_STRING(L_INT) TO <L_CELL>.
        I_INTERN_VALUE = <L_CELL>.
      endif.
      L_INT = L_INT + 2.
      I_SIC_INT = L_INT.
      I_STRING = I_STRING+L_INT.
    ELSEIF I_STRING CS C_ESC.
    letzte Celle
      L_INT = SY-FDPOS.
      if l_int = 0.
        clear i_intern_value.
      else.
        ASSIGN I_STRING(L_INT) TO <L_CELL>.
        I_INTERN_VALUE = <L_CELL>.
      endif.
      L_INT = L_INT + 1.
      I_SIC_INT = L_INT.
      I_STRING = I_STRING+L_INT.
      L_INT = STRLEN( I_STRING ).
      IF L_INT > 0 . MESSAGE X001(KX) . ENDIF.
    ELSE.
      MESSAGE X001(KX) . "was ist mit csv-Format
    ENDIF.
ENDIF.
Can you let me knwo how should i put my condition to support CR .
thanks,

Unit price for invoice

Hi Experts,
I want to get unit price for invoice line items from BSEG table.
How to get it.
What is the unit price field for invoice line items.
Regards,
Sangeeta.

Hi Sasi,
Should I take the line item amount(WRBTR) for unit price from bseg table?
Regards,
Sangeeta.
Edited by: Sangeeta on Dec 29, 2008 8:00 AM

XML INVOICE Report RAXINV, Taxline is repeating for each invoice line

Hi Tim
Thanks a lot for your blog
Greeting !!
I have successfully created XML report for AR invoice Printing learning from your blog but stuck to a problem , whenever Invoice is having multiple lines ,say 20, then for each invoice line there is tax line printing 20 times like this:
PART NO.| CUSTOMER PART#/DESCRIPTION | UNIT PRICE | QUNTITY|
A123 | 34 WELD-ROD | 52 | 22 |
Tax Exempt @ 0.00
A234 | 238-AL WIER | 63 | 55 |
Tax Exempt @ 0.00
........ Assume there are 20 lines then tax line also repeating 20 times which i don't want .It should get printed only once if it is same
pls help me to achieve this
Thanks
Rahul

Thanks Tim for Your Instant reply.
I have gone through your duplicate line elimination but my requirement is not this
I'll explain it, I am using LINE_DESCRIPTION tag for printing item description and this tag have two value for it, when the LINE_TYPE =LINE then LINE_DESCRIPTION tag is printing the line description and if LINE_TYPE =TAX
then LINE_DESCRIPTION tag is printing the taxline information. Now if I have 20 lines in Invoice then the tax line will also repeat for 20 times, and if i use duplicate line elimination logic and I have same item it'll not print that item, some times whole invoice become blank.
So I want to print 20 lines and out of that 15 lines are have same tax rate then it should print once at the end of 15th line and for remaining 5 lines if tax rate is different for each line then it should print at the end of each line (5lines)
In the linetreevariable i used <xsl:variable xdofo:ctx="incontext" name="invLines" select=".//G_LINES [LINE_TYPE!='FREIGHT']"/> i.e. I want only line type=LINE and TAX
Thanks
Rahul

Problem in invoice printout for second line item of the contract.

Hi,
There are two line items in the contract. Both with different material and different plants. 1st line item with plant japan, and 2nd line item with plant singapore. But, when i try to take printout for 2nd line item after invoicing it, the address appearing in printout is of Japan instead of singapore.
Any idea why this happening?
Please revert back asap.

Hi Chetan,
If that is a header output, then there are issues at the design level itself. You have an output as header output and you expect the item level details to be printed in two different printouts.How is this handled in the program. Mostly header outputs are used to print the details abotu all the items in the doucment , not for a specific item. If you want to print a specific item only , then it is always advisable to configure the output as item output.
Leaving that aside, the problem lies in the code. You may be selecting the item number when you are printing the details of the second item, but for printing address, you are not coding using the item number.
To prove this test this scenario.
Create an order with first item belonging to Singapore plant and second item Japan plant.
Now create the otuput for item1----it will work fine
Do the same for item2-----Now, the plant address will be of Singapore, while the material belongs to Japan.
If this happens, it can be safely assumed that problem lies in the code. Do this test and then if the problem is in the program, discuss with your developer, he will rectify the bug for you.
You can reward me if this solves your problem.

Service line item History for Contracts with item cat - D and Acc Assg P

Hello Gurus,
We have a situation where we create contract with item category D (Service) and account assignment category P (Projects). And for the line items of the PO we have difference services (without a service master) and each service line item has the price and quantity and other required fields. Now it is required to change the price or the quantity or both for this service line time and again (business requirement).
The task is to to track the price changes and the quantity changes that have happened to the serive line item from the original and we require the report to diplay the original price and the present price on the service line.
The question is: Is there a standard report in SAP to handle this? Or which are the tables where a service line items history is stored so that it can lead to a development.
Regards - SS

Hi Pankaj,
We are using a Percentage based case (Prorata case)
For Eg : For Eg for 65% (65KAI )material Price 1000 Rs
If the Purity percentage varies payment will be done as per the same. For eg : for 70% (70KAI ) Price 1200 Rs. (approx)
In this case unit of measurement is KAI (kilo active ingredient) .
Actually we are dealing with dealer price where duties are entered Inclusive of the total price and entered at the time of making GR. and the payment is made as per the same;
we have one po for 5000 MT. where we received material at first time Qty being 1993 MT.The duties manuallyentered are as follows :BED :24,167.00
AED : 7,076.00
ECS : 483.00
SECES : 242.00
These duties are flowing correctly in MIRO
and the MIRO has been Posted and payment is also made.
But while the balance quantity 2982 kg we received next time and those duties are as flowing as follws:
BED : 36160
AED : 10587
ECS : 723
SECS : 362
But here at the MIRO the following duties are flowing instead of above
BED : 36,526.08
AED : 10,694.18
ECS : 730.32
SECS : 365.66
What might be the error at this stage.
waiting for solution at the earliest .
Regards,
Girish.C.M.
09377077122

Transaction KSB1 - Display Actual Cost Line Items for Cost Centers

Hi,
When I run transaction KSB1 - Display Actual Cost Line Items for Cost Centers, all my offsetting accounts (accumulated depreciation accounts) are shown except for the ones for asset classes:
- Buildings
- PC & Small Applications
On the FI side, I can see transactions being posted to their relative accumulated depreciation accounts but I do not see this on the CO side when transaction KSB1 is executed. I have checked the config and the account assignments look correct. Also, the assets created have cost centers assigned to them.
Could you please help!
Thanks,
- Deki

Hi Murali,
I have one depreciation expense account (P/L Account) which is also a cost element.
During depreciation run, the different asset classes are supposed to hit the depreciation account above and their corresponding accumulated depreciation accounts (These are Balance Sheet Accounts and I have separate accounts for each asset class .. ie: Accumulated Depreciation for Furniture and Fixture for asset class Furniture and Fixture).
Now when I run transaction KSB1 - Display Actual Cost Line Items for Cost Centers, all my accumulated depreciation accounts are shown except for the ones for these asset classes:
- Buildings
- PC & Small Applications
Any thoughts on why the above aren't showing?
Thanks! I really appreciate your help!
- Deki

Different currencies for multiple line items in a AP invoice?

Hi, Expert,
Is it possible to assign different currencies for multiple line items in a AP invoice?
Eg:
One vendor is supplying raw materials from different regions, and we have to raise one invoice with different currency rate to each items
regards,
Sanju

Hi Sanju,
It is not possible to assign different currencies for multiple line items in a AP invoice.
Try to book the different documents(different correncies for a single vendor in a A/P Invoice).
Regards,
Madhan.

MIRO partial invoice for PO line item

Greetings,
We are currently using GR based invoice verification. Recently we received a vendor invoice for partial billing of a fully received line item. The system requires that we enter both a quantity and an amount for the line item being paid. We have up to three decimal places in the quantity field. Our problem is that the amount of the invoice does not correspond to a number that can be entered in the quantity field (it equates to .06147029...). This is causing the system to generate a split accounting entry. Rather than debiting the GRIR account for the full amount of the payment, it is debiting the GRIR account for the amount that corresponds to the quantity entered, and then posting the remainder to the GL associated with the cost object from the PO. Is there a way to prevent the system from making this additional entry? Any input you can provide would be greatly appreciated. I will award points for helpful suggestions. Thanks! Heather

Per SAP, the functionality is working as designed.

Want Transaction History for Particular Transaction for Particular User. .

Hello Friends,
I have one query.
I want to get detailed Transaction History for Particular Transaction for Particular User_Id for particular Time/Date period, with his/her Terminal ID info ,also.
One USER_ID in SAP Server is shared among 6-7 people to do their work.
So, I want to know that from which terminal that user has run that transaction to do its work on particular Date/time.
I tried STAT, STAD, ST03N, but did not help me very much to get deep level information.
May be, i am missing something to get the solution for this kind of situation.
Any Solution for this kind of Situation ?
I am waiting for your valuable Response.
Regards,
Bhavik Shroff

I want to get detailed Transaction History for Particular Transaction for Particular User_Id for particular Time/Date period, with his/her Terminal ID info ,also.
ST01 will give you the Result after switching on the TRACE. I want to get Transaction History for a particular DAY/Weeks/Month .
e.g.
One User Id is shared among 6-7 people. One of the person did something using FB08 transaction on last 08/07/2008. But, as the User ID is shared among several User, How can i know the person who did that change and from which place/Terminal.
See,
I have the following information to fire the search.
-> User Id information
-> which transaction he/she used to do that work
-> When he did the change for something (means i know the exact date)
But , I want to know ,from which Terminal he/she executed that transaction, as the User ID is shared among several people.
You tell me the way ,so that i can have total required information for this kind of situation.
If i am wrong at any step , then let me know.
Regards,
Bhavik Shroff.

IDoc message Document or line item does not exist for invoice reference

Hello,
We activated IDoc message type FIDCC2. When cancelling documents which were created before the activation date the cancellation documents aren't posted in the receiving system. Message 'Document or line item does not exist for invoice reference' appears. How can I process these items (the reference document can't exist in the receiving system so the only option is to remove it from the IDoc?)?
Regards, Jan

This is just a guide. Adapt it to your situation. I get this kind of error message where in the case, someone has marked for deletion a line item in the purchase order. In this regard, the IDoc errors out because the line item number being referenced is marked for deletion.
You can either delete the IDoc or have the deletion flag taken off the line item number in the PO or document number to enable you reprocess the IDoc number in question.
Elias

Customer Overview: Consumption History

Hi all,
I am struggling with a special situation. I am implementing the ISU CS Module for a water company and one of the tools that they want to use is the "Customer Overview" transaction ECVBP02.
Regarding Consumption History, this transaction always shows the Annual Consumption Values and the Operand WQUANT___1 for Water Consumption. Can this be modified? Can I show more than one Operand? Can I set the consumption for 6 months instead of one year?
And Regarding Consumption History...is there any report/transaction? Where can I check the Consumption History month by month for a certaing Customer / Account?
I hope you can help me......any answer will be helpful.
Thank you very much in advace,
Best Regards,
LUCAS

Please study the following example, It might give you an idea.
Example
A double-rate meter is installed in a commercial electricity installation. In addition to on-peak and off-peak rate registers, the installation includes a wattmeter that is billed using the rate "LEIST". The current consumption is displayed in the customer overview of the front office as follows:
Operand AnnualCons. Unit Rate Rate Description
Daily cons. 23,700 kWh On-peak On-peak small business
Night cons. 8,200 kWh Off-peak Off-peak small business
Meas.demand 23.0 kW DEMAND Demand (simple)
If you want to display a complete consumption history, you must make the following settings:
1. Maintain the following variants in the rate steps of your rate:
INFACT01 Write a demand in the installation facts
INFACT06 Write an amount in the installation facts
The rate steps for the rates mentioned above might look like this, for example:
Rate Variant InputOp1 InputOp2 OutputOp1
On-peak QUANTI01 On-pkCons. On-pkPrice Amount
On-peak INFACT06 On-pkCons. On-pkHistory
Off-peak QUANTI01 Off-pkCons. Off-pkPrice Amount
Off-peak INFACT06 Off-pkCons. Off-pkHistory
Demand DEMAND01 Demand DemandPrice Amount
Demand INFACT01 Demand DemandHistory
2. Make sure the complete history indicator is set for the following output parameters: On-peak history, off-peak history, and demand history.
3. Consumption and demand of the three registers is written in the installation facts for each billing. In this way, you obtain the complete consumption history in the front office:
Op.Text Orig.Cons. Unit To-Date AvgCons. Annual Cons.
Demand 268 KW 11/30/1998 260   280
Off-pkCons. 274 KWH 11/30/1998 281   270
On-pkCons. 48 KWH 11/30/1998 50   55
4. You branch to the historical data of the desired installation by double-clicking. The overview might look like this, for example:
From-Date To-Date Orig.Cons. Red.Cons. Unit Doc.No.
11/01/1998 11/30/1998 268 250 KW 4711
10/01/1998 10/31/1998 257 250 KW 4712
09/01/1998 09/30/1998 271 250 KW 4713
08/01/1998 08/31/1998 269 250 KW 4714
07/01/1998 07/31/1998 268 250 KW 4715
5. You branch to the corresponding billing document by double-clicking a line.
Hope this will be helpful!
Regards,
Rajini.

ISU - EAMACB transaction - Consumption History for Invoicing Line

Similar Messages

Maybe you are looking for