ISX40 trying to find a telephoto lens and filter .
I am trying to find a telephoto lens and filter that fits my SX40. Have recently purchased a 52mm but in my viewfinder the subject appears foggy. I would like to take closeups of distant subject.
Solved!
Go to Solution.
Hi Annadamma,
Because of the zoom capability of this camera, Canon does not offer accessory telephoto or zoom lenses for it.
While you can obtain accessory lenses for Rebel cameras, to get more reach than you have with this camera, you'd need a lens with a longer focal length than 840mm. The lens with the longest focal length currently offered by Canon is the . You may see this lens by clicking here.
For a bit more "reach", you may want to use the digital zoom feature, as shown below:
Press the <MENU> button (), and from the [Shooting] tab () set the [Digital Zoom] to either [1.5x] or [2.0x].
important:
A recording pixel setting of [Large] () or [Medium 1] () will cause images to appear coarse (the zoom factor will appear in blue).
The [Digital tele-converter] cannot be used together with the [Digital zoom].
The [Digital tele-converter] can be used in the following aspect ratio and recording pixel setting combinations:
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Similar Messages
-
I am trying to find the Armenian Keyboard and it seems as though it doesn't exist. How may I write in my language? When will Apple develope the Armenian keyboard? I dislike using 3rd party apps that have the keyboard but Apple continuously does not integrate it into the Iphone users updates.
Nobody here would know if and when an Armenian KB will be available. Nobody here works for Apple and they do not monitor this forum.
If you want to leave feedback, do it here:
www.apple.com/feedback -
i have tryed the "find my ipod application" and i tried to lock it and it have been locked but i am using the ipod without any effects but if by time would be any side effects?
It will be locked when you connect it to Wi-Fi
-
Plz help
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have to iPod play a sound via iCloud.
- If not shown/or shown as oof-line, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
I'm trying to find my bookmarks.plst and can't find it anywhere. Any ideas?
So, I upgraded our OS and then upgraded the HD. I forgot somehow to transfer the bookmarks from my husbands user account. Now, I can't find them on the old disc. They are not in the library and there is no bookmarks.plst. Did lion change where they are stored? Hubby's getting stressed - I need to find them. HELP!
It's in your user's Library folder which Apple hides. To get to it go to the Desktop, hold the Option key down and then goto the Go menu -> Library. In the Safari folder you should see your Bookmarks.plist.
-
I accidentally downloaded a paid app, while laying down on my sofa and while fighting to stay awake. But I fell asleep and woke up just in time to see me press "Yes" on the "Are you sure" question (at least the way I remember it).
Are all sales final, or can I get a refund?
signed
a big dummy.
Ray Feliciano
[email protected]You can plea your case here:
http://www.apple.com/emea/support/itunes/contact.html -
Here's a program for finding your product ID and Vendor ID of USB device
Greetings, All
Just to let you know of a program I found that will tell you the Product ID and Vendor ID. A long with a bunch
of other stuff for your USB device.
This all started trying to find my product ID and Vendor ID for my Radium 49 MIDI USB keyboard to use with VISA.
Tech Support at M-Audio had no idea what I was talking about so I found this instead. Hope this helps
someone else out that uses no standard hardware.
Enjoy
It's called usb monitor
http://www.hhdsoftware.com/usbmon.htmlThank you son,
I will try this out. This could become a good tool to detect USB devices which are part of an ATE (for which there may not be LV drivers).
I will post feedback after "experimenting with it".
Thanks again!!
-JLV- -
Startup always tries to find my other computer?
When I restart my computer, it ALWAYS tries to reconnect to my mac mini in the other room. ONE TIME I shared files between the two and now it ALWAYS looks for it when restarting.
How can I disable this? I looked in my startup items folder and there's nothing there that would make it look for the mini. Where do I look to stop this from happening?
Thank you!If it is trying to find the other computer, and failing, whatever is looking ought to be posting error messages to the log file. Try launching Console from your Utilities folder and see if there are error messages, and, if so, exactly what they say. That might give a clue.
If there's nothing in the Console log, try clicking on the Logs icon in the toolbar and then click on the system.log--the newest log, which reports what the computer is doing when it starts up, begins with the time. I just started up 10 minutes ago, so I scroll up and see:
Nov 15 23:03:08 localhost kernel[0]: standard timeslicing quantum is 10000 us
Scroll down aways after that and you will see where it mounts your disks, with a message like this:
Nov 15 23:03:10 localhost diskarbitrationd[43]: disk2s10 hfs
7E476622-EDE9-3BF8-BF19-31E11E9E9535 NoobiX
After that the login window starts, and at some point thereafter would be the information that might solve the mystery.
Francine
Francine
Schwieder -
When I login, all of my desktop items are gone, the "Finder" icon is bouncing and a message asking to restore windows is blinking but unresponsive. I can't exit out of it. What do I do? I've tried force quitting, and it doesn't get rid of this message. When I login to my husband's account, this message does not appear.
Hey sunnyday7!
Here is an article that can help you address this issue:
OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/ht3411
Additional Information
OS X automatically relaunches the Finder when it is quit. If the Finder is unresponsive, use Force Quit to relaunch it. Select Finder in the Force Quit Window or Dock, then click Relaunch.
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
I'm trying to find out how to export my apple contacts to the Salesforce software and they need to be in a csv format and I don't know if this is possible and how to do it if it is?
I think there are third-party programs which will do that, but you can also do it with Automator:
See the links in my post, here: https://discussions.apple.com/message/22390873#22390873
The file or clipboard contents will be in Tab Separated vars, so you'll have to open with a spreadsheet program and save as Comma Separated Vars format. -
Tried using Find My iPhone and it's offline. It (Find my iPhone) was set up. What do I do now? Do I report it stolen? What is the best way in getting back my iPhone if any? Thank you in advance.
Find My iPhone is good for misplaced iPhone but not good for thief and it was never meant to be.
You chance of getting it back is very small.
There are a few things you can try.
Try remote lock/wipe your iPhone through Find My iPhone.
https://www.icloud.com
You can report to the police, cell carrier (expensive cell charges for international calls, roaming etc)
Change all the passwords used in iPhone: Apple ID, E-mail, Bank Account ....
http://support.apple.com/kb/HT2526 -
Attachments dont download from Gmail in Safari, They disappear,I even tried re-downloading Safari and that download disappeared, it is not in my downloads folder, I actually searched in finder for the file and it is nowhere on my computer. Please help!
Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck! -
I'm trying to find an easy way to import my MP3 collection into iTunes without moving, copying or changing it.
I can't believe that iTunes doesn't have this feature, as even the most basic music players always have this.
I only use iTunes to sync my iPod, as I like Media Monkey to play my MP3s.
I have 137GB of MP3s, mainly from my ripping my CDs, LPs and downloading from Amazon. I've only purchased a handful of songs from iTunes,
Any ideas on how to do this easily?DAReese13 wrote:
I can't believe that iTunes doesn't have this feature, as even the most basic music players always have this.
It does have that feature. Why would you assume that it doesn't?
DAReese13 wrote:
I'm trying to find an easy way to import my MP3 collection into iTunes without moving, copying or changing it.
Okay, no problem.
If the top bar menu is not displayed in top left of your iTunes Library, use the CTRL+B keys to turn it on:
On that menu, use File/Add Folder to Library and navigate to the folder you wish to add:
If you wish to add just one song, notice the File/Add File to Library command on that menu as well.
Alternatively, you can drag-and-drop from the file's location into your iTunes Library.
That's all there is to it.
By the way, it is possible to have Amazon MP3s downloaded to your computer and then automatically added to the iTunes Library by the Amazon downloader. I do it all the time.
Message was edited by: the fiend -
I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network
Which version of OSX and what email provider are you using.
-
I had a drive failure and lost the iWeb file along with other things.
I did manage to save a lot of user file documents but I don't see or
recognize the iWeb site file. It was on a 15" G4 Titanium pb.
I'm trying to find a way, using version 2.0.4 of iWeb on a different
pb to recover the file into the iWeb app or a way to download the site into iWeb.
There are 6 pages of images and text, and it
would be a task for me to recreate the whole thing again. I did
download the site but I don't know how or if I can get iWeb to see it and open it.
Does anyone have any knowledge about this? The link to my site:
<http://web.mac.com/danauerbach>
Any suggestions will be most appreciated.
dan auerbach
[email protected]Unfortunately iWeb cannot read or import previously published files, only generate them. You'll have to recreate your site from scratch.
However, Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the recreation of the site.
OT
Maybe you are looking for
-
F-53 Error- u201C Item was not activated due to on line payment block.u201D
When we are doing payment document against T Code F-53 for FI document systems is giving message That u201C Item was not activated due to on line payment block.u201D This error is due to what ? Regards, Shekhar Gaikwad
-
How to create a link to web page (URL) to a billing document
Hi, I have an urgent requirement of creating a link to web page (URL) to a billing document. I call the function module "GOS_EXECUTE_SERVICE" with : ip_service = 'URL_CREA' is_object-objkey = no billing document is_object-objtype = 'VBRK' is_object-l
-
IT008 not getting logged in PCL4
Hi Guys, I was working on a program similar to the standard program RPUAUD00. This basically creates a report for any changes made in infotypes. In IT008 changes made after 1st April are not getting logged in the PCL4 log. This is happening only in p
-
Operations of a maintenance order
Hi all. I'm using the BAPI "IBAPI_ALM_ORDER_OPER_READ" in order to obtain all operations of an order. With some orders this BAPI doesn´t return me all operations, just a part of them. Someone can help me to know why does it happens? Or maybe another
-
I need help I can't get my computer to recognize my ipod nano 7th....going through all the steps...NOT HELPING LOL