It's growing on me.

Well, since my "going to return it" thread got deleted by the admins for what i'm sure is a valid reason. not.
appletv is growing on me. i guess i dont really need to buy non-hd content from the itms anyway. just lower my expectations a bit and be perfectly happy watching 480p until they decide to upgrade the service.
the movie trailers or lack thereof still bugs though. what up with that? apple can only put 40 trailers on appletv? but have thousands on apple.com.

I guess this is the Can't Saying Anything Bad About Apple Discussion.

Similar Messages

"Can Grow" property on Cross-Tab object can not be unlock

I am using Crystal Reports XI. My report uses a Cross-Tab object via SQL server. I am having problem making my data column (Field Row) to increase dynamically in height when my data size increases. Since the "Can Grow" property in the Format Editor is locked, it would not let me set the "Can Grow" to true to enable this function. How do I unlock the "Can Grow" function so I can set it to true?

The only other option I can think of would be to build a virtual cross tab, but in many cases, especially when the number of 'column' values is dynamic, this is not possible.

Crystal 2008: Text, Can Grow=true, Max Lines=0, truncated after 2 lines

I have a fairly simple, grouped report with a handful of fields in each Detail section, one of which is a note/text field. I put the text field on its own line and set Can Grow = true, max lines = 0 so that it will display what it needs to display.
This happens to be a crystalreports.com report using data coming from Salesforce, and I can see in the source report that I have about 7 lines of text for one of my groups, but crystal is truncating it after two lines, and in the middle of a word.
The word ('for') doesn't have any obvious special characters in it, so I'm guessing that there's some sort of character limit that I'm bumping up against.
I have another record that is returning more than two lines, though; are there particular characters that could cause this? I can scrub the data and/or put Salesforce Validation Rules in place to try and prevent them from getting in.
Any suggestions would be appreciated.
Duncan

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Can Grow Vertical Alignment Error in Embedded Report View, but not in .PDF

Hello,
I have seen postings about this issue before, but have yet to find a solution.
I am using Visual Studio 2008 w/ the basic version of Crystal Reports that is included.
I have a simple report that displays results of a stored procedure as rows across the report. One field can be of variable length, anywhere from 0 to 100 characters. Usually it's something reasonable (less than 40 chars), and so I have only given it so much width in the report. For when it is longer than that, I turned the "Can Grow" property ON, and set the Maximum Number of Lines property to 0.
When the report displays embedded in my Web Form, and this field's data is wider than the space I have allowed, it breaks the data down into multiple lines of the same correct width, as you'd expect, but those lines end up displaced vertically upward several rows, and print directly on top of other data from the above rows, make the report unreadable in that area (and quite ugly overall!).
If I export this report to a .PDF, it displays perfectly, without the vertical displacement error.
Anyone know what the official work is on this? Is there a fix or is this a bug?
If there is no fix, does anyone know how to direct the report to the .PDF file viewer, so the embedded report remains invisible (and thus hides the ugly error), but the user has the .PDF version to see? My client ultimately wants to export the report to .PDF, which I have already coded, but it does not open the .PDF Viewer, just saves the report to disk. However, if I use the Crystal built-in Export button, it first displays a pop-up asking which format to export to, then if .PDF is chosen and okay is clicked, the pop-up switches to contain the .PDF Viewer, and opens the report. In my user-defined export code, the .PDF is correctly created, but I am missing the step on how to open the .PDF Viewer.
Any ideas?

Thanks for the responses.
Jonathan, moving the field in question to its own details section (details B) did not fix the issue. The field in question is moved slightly down as its in a new details section with sits slightly lower than details A, but when it has to be broken up into multiple lines, the same issue arises, the field text is displaced vertically upward and sits on top of other data.
Ludek, I wanted to send the report to a .PDF Viewer in a new browser, and keep the original browser intact. I'm using code very similar to yours. To launch the new broswer I added this code to the Page_Load of my main browser:
btnViewReport.Attributes.Add("onclick", "window.open(Page.aspx', """", """", 'height=200,width=400')")
When the button is clicked the report is exported, and the new browser opens Page.aspx.
I use this code in Page_Load of Page.aspx:
        Dim webClient As System.Net.WebClient = New System.Net.WebClient()
        Dim buffer As Byte() = webClient.DownloadData("C:\Reports\Report.pdf")
        If Not buffer.Length.Equals(0) Then
            Response.ContentType = "application/pdf"
            Response.AddHeader("content-length", buffer.Length.ToString())
            Response.BinaryWrite(buffer)
        End If
Any other ideas on the original vertical displacement issue when using Can Grow, I'd still appreciate it.
Thanks,
Scott
Edited by: Scott Deltorto on Sep 23, 2008 10:15 PM

How to prevent a JPanel to grow ?

Hello,
I've included a JPanel in a JScrollPane.
When I size down the whole thing, scroll bars appear. Nice.
But when I size up, the JPanel grows and its content (buttons) is stretched.
I would like the JPanel to always keep the same size, and some grey area to appear around it when the JScrollPane is sized up. I've tried with :
panel.setMaximumSize (panel.getPreferredSize ());
panel.setMinimumSize (panel.getPreferredSize ());
But it does nothing...
Do you know how to do ?
Matthieu

Subclass the JPanel and return your own fixed preferredSize always.

Sharepoint log files growing huge

Once again a SharePoint question :)
I ran the following script against our SharePoint 2013 farm:
#Specify the location of the CSV file here.
$r = Import-Csv C:\folder\users.csv
foreach($i in $r){
#The following line displays the current user.
Write-Host "The URL is:"$i.Url
#Disables the "Minimal Download Strategy" feature under "Site Features".
#Disable-SPFeature -Identity "MDSFeature" -Url $i.Url -force -confirm:$false
#Enables the "SharePoint Server Publishing" feature under "Site Features".
Enable-SPFeature -Identity "PublishingSite" -Url $i.Url -force -confirm:$false
#Enables the "SharePoint Server Publishing Infrastructure" feature under "Site Collection Features".
Enable-SPFeature -Identity "PublishingWeb" -Url $i.Url -force -confirm:$false
The csv file that is being imported contains about 2000+ rows with users' MySite links where we want to en-/disable several features.
The script does what it is supposed to do, but while running the script and reaching user No. ~15 the log files under "C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS" starts to grow huuuuuuge (~5GB).
They are mostly filled with this:
09/17/2014 11:04:27.72 PowerShell.exe (0x235C) 0x2B44 SharePoint Foundation Performance naqx Monitorable Potentially excessive number of SPRequest objects (18) currently unreleased on thread 6. Ensure that this object or its parent (such as an SPWeb or SPSite) is being properly disposed. This object is holding on to a separate native heap.This object will not be automatically disposed. Allocation Id for this object: {D5F7BC80-8C88-4E17-9985-782F9724F2B9} Stack trace of current allocation: at Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous) at Microsoft.SharePoint.SPWeb.InitializeSPRequest() at Microsoft.SharePoint.SPWeb.EnsureSPRequest() at Microsof... 5b7cf973-1e3f-4985-bdf8-598eecf86ab6
09/17/2014 11:04:27.72* PowerShell.exe (0x235C) 0x2B44 SharePoint Foundation Performance naqx Monitorable ...t.SharePoint.SPWeb.SetAllowUnsafeUpdates(Boolean allowUnsafeUpdates) at Microsoft.SharePoint.SPPageParserNativeProvider.<>c__DisplayClass1.<UpdateBinaryPropertiesForWebParts>b__0() at Microsoft.SharePoint.SPSecurity.RunAsUser(SPUserToken userToken, Boolean bResetContext, WaitCallback code, Object param) at Microsoft.SharePoint.SPPageParserNativeProvider.UpdateBinaryPropertiesForWebParts(Byte[]& userToken, Guid& tranLockerId, Guid siteId, Int32 zone, String webUrl, String documentUrl, Object& registerDirectivesData, Object& connectionInformation, Object& webPartInformation, IntPtr pWebPartUpdater) at Microsoft.SharePoint.Library.SPRequestInternalClass.EnableModuleFromXml(String bstrSetupDirectory, String bstrFeatureDirectory, String bstrUrl, String bstrXML, Boolean fForceUng... 5b7cf973-1e3f-4985-bdf8-598eecf86ab6
09/17/2014 11:04:27.72* PowerShell.exe (0x235C) 0x2B44 SharePoint Foundation Performance naqx Monitorable ...host, ISPEnableModuleCallback pModuleContext) at Microsoft.SharePoint.Library.SPRequestInternalClass.EnableModuleFromXml(String bstrSetupDirectory, String bstrFeatureDirectory, String bstrUrl, String bstrXML, Boolean fForceUnghost, ISPEnableModuleCallback pModuleContext) at Microsoft.SharePoint.Library.SPRequest.EnableModuleFromXml(String bstrSetupDirectory, String bstrFeatureDirectory, String bstrUrl, String bstrXML, Boolean fForceUnghost, ISPEnableModuleCallback pModuleContext) at Microsoft.SharePoint.SPModule.ActivateFromFeature(SPFeatureDefinition featdef, XmlNode xnModule, SPWeb web) at Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionModules(SPFeaturePropertyCollection props, SPSite site, SPWeb web, SPFeatureActivateFlags activateFlags, Boole... 5b7cf973-1e3f-4985-bdf8-598eecf86ab6
09/17/2014 11:04:27.72* PowerShell.exe (0x235C) 0x2B44 SharePoint Foundation Performance naqx Monitorable ...an fForce) at Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionElements(SPFeaturePropertyCollection props, SPWebApplication webapp, SPSite site, SPWeb web, SPFeatureActivateFlags activateFlags, Boolean fForce) at Microsoft.SharePoint.SPFeature.Activate(SPSite siteParent, SPWeb webParent, SPFeaturePropertyCollection props, SPFeatureActivateFlags activateFlags, Boolean fForce) at Microsoft.SharePoint.SPFeatureCollection.AddInternal(SPFeatureDefinition featdef, Version version, SPFeaturePropertyCollection properties, SPFeatureActivateFlags activateFlags, Boolean force, Boolean fMarkOnly) at Microsoft.SharePoint.SPFeatureCollection.CheckSameScopeDependency(SPFeatureDefinition featdefDependant, SPFeatureDependency featdep, SPFeatureDefinition featdefDep... 5b7cf973-1e3f-4985-bdf8-598eecf86ab6
09/17/2014 11:04:27.72* PowerShell.exe (0x235C) 0x2B44 SharePoint Foundation Performance naqx Monitorable ...endency, Boolean fActivateHidden, Boolean fUpgrade, Boolean fForce, Boolean fMarkOnly) at Microsoft.SharePoint.SPFeatureCollection.CheckFeatureDependency(SPFeatureDefinition featdefDependant, SPFeatureDependency featdep, Boolean fActivateHidden, Boolean fUpgrade, Boolean fForce, Boolean fMarkOnly, FailureReason& errType) at Microsoft.SharePoint.SPFeatureCollection.CheckFeatureDependencies(SPFeatureDefinition featdef, Boolean fActivateHidden, Boolean fUpgrade, Boolean fForce, Boolean fThrowError, Boolean fMarkOnly, List`1& missingFeatures) at Microsoft.SharePoint.SPFeatureCollection.AddInternal(SPFeatureDefinition featdef, Version version, SPFeaturePropertyCollection properties, SPFeatureActivateFlags activateFlags, Boolean force, Boolean fMarkOnly) at Microsoft.SharePoint.S... 5b7cf973-1e3f-4985-bdf8-598eecf86ab6
09/17/2014 11:04:27.72* PowerShell.exe (0x235C) 0x2B44 SharePoint Foundation Performance naqx Monitorable ...PFeature.ActivateDeactivateFeatureAtSite(Boolean fActivate, Boolean fEnsure, Guid featid, SPFeatureDefinition featdef, String urlScope, String sProperties, Boolean fForce) at Microsoft.SharePoint.SPFeature.ActivateDeactivateFeatureAtScope(Boolean fActivate, Guid featid, SPFeatureDefinition featdef, String urlScope, Boolean fForce) at Microsoft.SharePoint.PowerShell.SPCmdletEnableFeature.UpdateDataObject() at Microsoft.SharePoint.PowerShell.SPCmdlet.ProcessRecord() at System.Management.Automation.CommandProcessor.ProcessRecord() at System.Management.Automation.CommandProcessorBase.DoExecute() at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate) at System.Management.Automati... 5b7cf973-1e3f-4985-bdf8-598eecf86ab6
09/17/2014 11:04:27.72* PowerShell.exe (0x235C) 0x2B44 SharePoint Foundation Performance naqx Monitorable ...on.PipelineOps.InvokePipeline(Object input, Boolean ignoreInput, CommandParameterInternal[][] pipeElements, CommandBaseAst[] pipeElementAsts, CommandRedirection[][] commandRedirections, FunctionContext funcContext) at lambda_method(Closure , Object[] , StrongBox`1[] , InterpretedFrame ) at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.Interpreter.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.LightLambda.RunVoid1[T0](T0 arg0) at System.... 5b7cf973-1e3f-4985-bdf8-598eecf86ab6
09/17/2014 11:04:27.72* PowerShell.exe (0x235C) 0x2B44 SharePoint Foundation Performance naqx Monitorable ...Management.Automation.DlrScriptCommandProcessor.RunClause(Action`1 clause, Object dollarUnderbar, Object inputToProcess) at System.Management.Automation.CommandProcessorBase.DoComplete() at System.Management.Automation.Internal.PipelineProcessor.DoCompleteCore(CommandProcessorBase commandRequestingUpstreamCommandsToStop) at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate) at System.Management.Automation.PipelineOps.InvokePipeline(Object input, Boolean ignoreInput, CommandParameterInternal[][] pipeElements, CommandBaseAst[] pipeElementAsts, CommandRedirection[][] commandRedirections, FunctionContext funcContext) at System.Management.Automation.Interpreter.ActionCallInstruction`6.R... 5b7cf973-1e3f-4985-bdf8-598eecf86ab6
09/17/2014 11:04:27.72* PowerShell.exe (0x235C) 0x2B44 SharePoint Foundation Performance naqx Monitorable ...un(InterpretedFrame frame) at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.Interpreter.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.LightLambda.RunVoid1[T0](T0 arg0) at System.Management.Automation.DlrScriptCommandProcessor.RunClause(Action`1 clause, Object dollarUnderbar, Object inputToProcess) at System.Management.Automation.CommandProcessorBase.DoComplete() at System.Management.Automation.Internal.PipelineProcessor.DoCompleteCore(CommandProcessorBase commandRequestingUpstreamCommandsToStop) at System.Management.Automation.Intern... 5b7cf973-1e3f-4985-bdf8-598eecf86ab6
09/17/2014 11:04:27.72* PowerShell.exe (0x235C) 0x2B44 SharePoint Foundation Performance naqx Monitorable ...al.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate) at System.Management.Automation.Runspaces.LocalPipeline.InvokeHelper() at System.Management.Automation.Runspaces.LocalPipeline.InvokeThreadProc() at System.Management.Automation.Runspaces.PipelineThread.WorkerProc() at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart... 5b7cf973-1e3f-4985-bdf8-598eecf86ab6
09/17/2014 11:04:27.72* PowerShell.exe (0x235C) 0x2B44 SharePoint Foundation Performance naqx Monitorable ...() 5b7cf973-1e3f-4985-bdf8-598eecf86ab6
I tried finding something on the internet on this but either my Google Mojo is gone or there is no one else posting about this.
Since we do not want to change the logging behavior of SharePoint (unless it is really necessary), I'd like to know if there is something wrong with my code? Is there some parameter I can use to suspend logging for this script? There must be something I'm
doing horribly wrong :(
Thanks in advance!
(If anything I posted is unclear please let me know since English isn't my first language)
EDIT: There is nothing productive happening on that farm. There is a web application for the MySites and one for a publishing portal (without any significant content).

It's because MS did a poor job on the SharePoint object model. You shouldn't need to call a 'dispose' method on any object in .Net, the garbage collector should automatically identify a no-longer required object and remove it. Unfortunately, and there might
be a reason for it, that isn't true for SPWeb or SPSite objects.
Evidently the Enable-SPFeature comandlet contains a SPSite or SPWeb object and fails to dispose of it.
You could try using Start-SPAssignment: http://technet.microsoft.com/en-us/library/ff607664%28v=office.15%29.aspx which some have found to be useful to deal with this. Another option would be to create a process that generates a new thread for each row in
the csv which will result in the objects being destroyed as that process ends.

How to grow the report of customer's openitem with sales order

How to grow the report of customer's open item with sales order?
Now we can get the customer's open item with invoice No easily,but our end user need the the customer's open item also with sales order .And because a invoice to multi sales orders. I can do nothing.
Now I have a idea that a develivey No with one sales order , and one invoice with a sales order's develivery ,then one inovice to one sales order . I want to know if other company have use this idea. Or have other solution for my problem.

Hi Yuzhou Yang ,
Yes you are right. In FI transaction you can get the sales invoice wise , reference field of the header data.
As you are aware that while creating a sales order , no FI entry is generated.
In my opinion you can get the required report through customization.
Thanks
D.K.Lakshmi narayana

TIme Machine backup grows too large during backup process

I have been using Time Machine without a problem for several months, backing up my imac - 500GB drive with 350g used. Recently TM failed because the backups had finally filled the external drive - 500GB USB. Since I did not need the older backups, I reformatted the external drive to start from scratch. Now TM tries to do an initial full backup but the size keeps growing as it is backing up, eventually becoming too large for the external drive and TM fails. It will report, say, 200G to back up, then it reaches that point and the "Backing up XXXGB of XXXGB" just keeps getting larger. I have tried excluding more than 100GB of files to get the backup set very small, but it still grows during the backup process. I have deleted plist and cache files as some discussions have suggested, but the same issue occurs each time. What is going on???

Michael Birtel wrote:
Here is the log for the last failure. As you see it indicates there is enough room 345g needed, 464G available, but then it fails. I can watch the backup progress, it reaches 345G and then keeps growing till it give out of disk space error. I don't know what "Event store UUIDs don't match for volume: Macintosh HD" implies, maybe this is a clue?
No. It's sort of a warning, indicating that TM isn't sure what's changed on your internal HD since the previous backup, usually as a result of an abnormal shutdown. But since you just erased your TM disk, it's perfectly normal.
Starting standard backup
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Ownership is disabled on the backup destination volume. Enabling.
2009-07-08 19:37:53.659 FindSystemFiles[254:713] Querying receipt database for system packages
2009-07-08 19:37:55.582 FindSystemFiles[254:713] Using system path cache.
Event store UUIDs don't match for volume: Macintosh HD
Backup content size: 309.5 GB excluded items size: 22.3 GB for volume Macintosh HD
No pre-backup thinning needed: 345.01 GB requested (including padding), 464.53 GB available
This is a completely normal start to a backup. Just after that last message is when the actual copying begins. Apparently whatever's happening, no messages are being sent to the log, so this may not be an easy one to figure out.
First, let's use Disk Utility to confirm that the disk really is set up properly.
First, select the second line for your internal HD (usually named "Macintosh HD"). Towards the bottom, the Format should be +Mac OS Extended (Journaled),+ although it might be +Mac OS Extended (Case-sensitive, Journaled).+
Next, select the line for your TM partition (indented, with the name). Towards the bottom, the Format must be the same as your internal HD (above). If it isn't, you must erase the partition (not necessarily the whole drive) and reformat it with Disk Utility.
Sometimes when TM formats a drive for you automatically, it sets it to +Mac OS Extended (Case-sensitive, Journaled).+ Do not use this unless your internal HD is also case-sensitive. All drives being backed-up, and your TM volume, should be the same. TM may do backups this way, but you could be in for major problems trying to restore to a mis-matched drive.
Last, select the top line of the TM drive (with the make and size). Towards the bottom, the *Partition Map Scheme* should be GUID (preferred) or +Apple Partition Map+ for an Intel Mac. It must be +Apple Partition Map+ for a PPC Mac.
If any of this is incorrect, that's likely the source of the problem. See item #5 of the Frequently Asked Questions post at the top of this forum for instructions, then try again.
If it's all correct, perhaps there's something else in your logs.
Use the Console app (in your Applications/Utilities folder).
When it starts, click +Show Log List+ in the toolbar, then navigate in the sidebar that opens up to your system.log and select it. Navigate to the +Starting standard backup+ message that you noted above, then see what follows that might indicate some sort of error, failure, termination, exit, etc. (many of the messages there are info for developers, etc.). If in doubt post (a reasonable amount of) the log here.

I share my itunes account with my kid but he is growing up and leaving for college soon. How do we breakup but not loose his music?

How does one break up with your kid on itunes and not loose all their music? My teen says if he sets up his own account or a new account with apple he will loose his music. Im sure lots of parents have this issue with kids as they grow into teenagers. Any advice much appreciated.

Floaty111 wrote:
If he purchases new music on the new account then presumably they will be in separate libraries
No. It will be in the same library.
You can have content from more than one iTunes account in the same library.
I did suggest saving the whole music folder to an external drive and then saving to new computer and deleting what he didn't want,he was less than impressed !
As opposed to sitting down now and going through everything before it gets copied over?
Kids...
It'll work but why not do it when you have the time and you are on your own computer rather than having to do it all at once?
Or you can quit iTunes, copy the entire iTunes folder to the external, open it (hold Option, launch iTunes, select Choose library... and select the iTunes folder on the extrenal) then go through and delete what he doesn't want.
Then copy the folder on the external to his computer.

Options for iTunes library - quickly growing with mp4 videos

Hello all,
Here is my dilemma. I have a large library of MP4 videos (movies) in my iTunes library, which is growing daily. These are not iTunes purchases. I plan to unload these files to an external HDD. Home Sharing is the main reason why I use iTunes for my Movie library to begin with.
Here is my dilemma. I cannot, to my knowledge, run a partially referenced iTunes library- where Music is automatically copied to the iTunes Media folder, but Videos are not (but rather referenced on the external hard drive).
1) Is there any way around this besides unchecking "automatically copy to iTunes folder" everytime I add a Video to my iTunes Library
2) Would I be better off creating two seperate iTunes libraries? One for the referenced video files on the EHD and one for my music, which I want to remain on my internal drive.
3) Any other plausible solutions?
I hope I'm being clear. Just looking for the best plan of action. Thanks in advance
MBP Late 2013''
10.9.2

1) Is there any way around this besides unchecking "automatically copy to iTunes folder" everytime I add a Video to my iTunes Library
No, not automatically, not with how iTunes presently works.
2) Would I be better off creating two seperate iTunes libraries? One for the referenced video files on the EHD and one for my music, which I want to remain on my internal drive.
No. I used to think it would but at least with my old iTunes version any libraries made in my user account share the same single user preferences. Unless you disable the "automatically copy to" feature I am pretty sure either library will put the items in the same media folder because they both use the one set of preferences settings. You can check this by making a second test library but don't add anything to it. Then check advanced preferences from yur main library and this test library and see if they point to the same media folder.
3) Any other plausible solutions?
Do it the way Michael Allbritton outlines, or leave it set to organize automatically but put the movies on the external drive, then add them back while holding down the option key. This overrides the copy-to function.
Note, splitting media storage this way will work but has disadvantages. If links break for any reason, iTunes will not automatically search for ones that are not part of its media folder organization. If you need to move files to a different drive in the future it will be somewhat tricky as you are likely to end up with a lot of broken links. There may be ways to avoid this but it won't be automatic.

How do I stop the "other" data from growing every time I sync my iPhone?

I recently started putting music on my iPhone 4s, and I found that every time I sync music, the "other" storage keeps growing. This only happens when I sync music. If I don't have music on my iPhone, the "other" doesn't grow. Why is this?? Does anyone know how to make this stop? I had to restore my phone as new to delete the "other" storage (I had almost 3 G on my 8 G iPhone). Because the "other" data takes up so much room, I find it difficult to add everything that I want to on my iPhone (like all of my music). Please help!

Hello brownielox,
Thank you for using Apple Support Communities.
For more information, take a look at:
iPhone, iPad, and iPod: Understanding capacity
http://support.apple.com/kb/ht1867
Other: Everything else, such as contacts, calendars, messages, emails and their attachments, Safari Offline Reading List, settings, and other system resources.
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
Resolution
Try disconnecting and reconnecting your device, then syncing again to solve this issue.
Orphaned files may remain on your iOS device if it is physically disconnected while syncing music, podcasts, videos, or photos. This can prevent iTunes from syncing the iOS device on subsequent sync sessions. When this happens, the Capacity indicator in iTunes may report a large amount of "Other" disk usage for the iOS device. To resolve this issue:
Turn off the music or photo sync option in iTunes for the device.
Click Apply to sync the changes to the device.
Turn the music and photo sync options for the device on again.
Click Apply again to try to sync the device to iTunes.
If the 'Not enough free space' alert appears, continue to step 5.
Turn off the automatic syncing functions for the iOS device. To do this:
Select the iOS device from the iTunes window and click the Summary tab.
Deselect "Automatically sync when this device is connected" and select the "Sync only checked songs and videos" checkbox.
Click Apply to sync the changes to the device.
Reduce the amount of data that is being synced to the device and resync the device. For example, if syncing your Music library exceeds the memory capacity of the device, choose "Selected playlists" to transfer rather than "All songs and playlists" under the Music tab in iTunes.
If the 'Not enough free space' alert appears, continue to step 6.
Restore using iTunes.
Have a nice day,
Mario

How do I make one block shrink as another grows to replace it?

I'm trying to show some sort of Magic Move or Action event that show two objects in slide one that become one object in slide two when Object A shrinks to nothing and Object B grows to fill the space vacated by the absence of A.
In other words, say I have two mutual funds, Fund A with 26k in and Fund B with 24k. I want to automate the sale of Fund B by having it shrink to zero while Fund A simultaneously increases to 50 as the money from the sale of Fund A is reinvested into Fund B.
I tried a Magic Move which successfully grew Fund A but it failed to shrink Fund B to zero - instead it just made it disappear. I want the shrinking action to look like the growing action, only in reverse. If I used the Action Build each action followed on from the last, the rectangle didn't shrink along its length, but towards its centre, and each part move needed a spacebar or arrow key click to activate that process.
I'm using rectangular blocks to represent the Fund values.
Any suggestions/ideas?
TIA

I tried something with two vertical columns. Take a look at http://www.troumconsulting.com/upanddown.key
It addresses the growth and shrinking concepts you mention.
Marty T.

How can tear down the growing barriers to education using iphone?

Recently, I have had a growing feeling that the avialability, meaningfulness, and ease of use of educational app on the iphone has gotten worse not better. In fact it feels like there are a growing number of specific barriers to education using the iphone. I would like to discuss one specific "barrier" to education--avialability in your country's app store by using a specific example--Einstien Pedometer App.
Back in 2011, the Einstien pedometer App by Kami was all the rage. Even popular science a noneducation maganize noted this innovation-- http://www.popsci.com/technology/article/2011-04/new-ipod-app-calculates-how-spe cial-relativity-affects-your-daily-activities . However, now you cannot get this app unless your are in china as you can see from the orginal link:
http://itunes.apple.com/us/app/einsteins-pedometer/id427443192?mt=8
So I ask you all for help in tear down this barrier and tearing down this wall...
How can we tear down this barrier of country availability?
Is there a way to contact the orginal company like Kami?
Is there a way to change your country and install it? Is this safe for students to do?
Should I contact tech support?
This app like other by Vogt and Kuhn are important ones to me that I have found unavialable in the United States. Measuring Relativity not just calculating it is important for the iphone future, because phones are currently one of the few mainstream devices to have a guarunteed across the board GPS chip! Thus, unlike the innovations of Vogt and Kuhn, the Einstien Pedometer is a physics application that is only available using ones smartphone.
This is my tech support submission, which better explains why I felt this was a barrier:
What happened to the Einstien Pedometer App?
Back in 2011 there was a famous Einstien's Pedometer App by Kami. Recently as of February 2014, I found out that this app was unavailable on the App Store due to "unavailable in the United States". The android already has a similar app called "Proper Time" by N. Thinsell. I wanted to include this app as part of my physics smart phone laboratory series. Specifically, I have worked painstakingly to develop a lab so that students could measure special relativity time dilation using their smart phones GPS chip. (The lab is similar to the work of P Vogt and J Kuhn which is different from many of gimmick apps, which are only ebooks of text, not actual physics measuring devices.) The current unavailability of this app is simply another barrier to using iphones for education. This is why I am very disappointed right now. Incorporating Android systems into physics high school curriculum is easy; however, I have tried many times to try to incorporate apple products into the physics curriculum to no avail. It feels like with each successful year there are more and more barriers to using iphones for application-level understanding in physics education.
Message was edited by: lanebell who finished adding the rest of there comments

Dah Veed,
How? No really how do I contact the app developer from a foreign country?
Going back to my example, so far I was able to figure out alot of things about the app developer of the Einstien Pedometer app--except there contact information. Besides prehaps seeking apples supports help in contacting the developer, do you have any other suggestions?
Information that I know so far:
App: Einstein's pedometer
Developer's Name: Mitsuru kamiyama
Language: Japanese
AppStore Page: https://itunes.apple.com/us/artist/kami/id362020177?mt=8
Developers really old website: http://playoffline.ddo.jp/app/
P.S. While it didn't exactly solve the problem, your reply was very helpful, so I thank you for your reply.

How to setup grow/shrink behavior on a moving group?

SD project. Group consists of 18 evenly spaced SD video clips each individually sized to 40%. The group is positioned near the top of the screen at 100% size.
The group then marches smoothly across the screen by transforming position X over 36 seconds using linear interpolation.
I am trying to cause the group (10 seconds into the timeline) to smoothly increase in size by applying a grow/shrink behavior over 3 seconds while continuing the X transform.
Position Y is changed to keep the location of the top of the group the same while the group grows.
Starts OK and ends OK. Works fine all the way to the end once the behavior finishes. Using the same X transform.
The problem is that during the grow behavior the apparent X and Y axis motion behaves incorrectly. The motion appears to change speed and even briefly reverses direction.
I understand why this is happening but I don't know how to fix it.
I have tried every combination of interpolation for the transforms along with every variation of the grow behavior parameters I can think of.
Everything I have tried makes things worse and/or introduces unwanted side effects.
Any thoughts?

I tried to implement what you were talking about. Just to make it easier on myself, I did use a 18 piece replicator instead of 18 individual files...so hopefully that doesn't change things. I did not get any reverse or weird X,Y behaviors acting incorrectly. It started at timeline 10:00 and ended at timeline 13:00, grew 120%, and the group had an anchor point set to the top of the group so it would only grow bottom and to the sides. Stuck with the same interpolation and everything. The only thing that looked weird was that the boxes pop back in place after the grow/shrink is done. Which is just because the behavior ends. Now! something that was odd was that I couldn't keyframe any parameters in the behavior?

Is it possible to turn a stroke into a shape? Is it possible to expand a shape so that it grows out?

If I have an organic shape (ie not a square or circle) and I want to give it an outline, but not use stroke, if I place a copy of the shape below it and expand it then the outlines don't match up, and for very complex shapes it can be time consuming to adjust it. If I could put a stroke on it then extract it into a shape, that would be one way.
Alternatively, is it possible to expand a shape so that it grows out, similiar to expanding a selection in Photoshop?
I'm using Illustrator CS3, but let me know if it's possible in other versions.

Object > Path > Offset path
also available as an effect

Log file is growing too big and too quick on ECC6 EHP4 system

Hello there,
i have ECC6EHP6 system based on NW 7.01 and MSSQL as back-end.
My log file is growing very fast. i seen a number of threads but does not got some perfect idea what to do. Please see DEV_RFC0 and DEV_W0 log file excerpt below. Please help
DEV_RFC0
Trace file opened at 20100618 065308 Eastern Daylight Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLSADC (Transaction: )
User: DDIC (Client: 000)
Destination: SAPDB_DBM_DAEMON (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 59356166, {ADC77ADF-C575-F1CC-B797-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLSADC)
SERVER> Called function module: DBM_CONNECT_PUR
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =SAPDB_DBM_DAEMON
HOST =%%RFCSERVER%%
PROG =dbmrfc@sapdb
Trace file opened at 20100618 065634 Eastern Daylight Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLSADC (Transaction: )
User: DDIC (Client: 000)
Destination: SAPDB_DBM_DAEMON (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 59587535, {28C87ADF-4577-F16D-B797-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLSADC)
SERVER> Called function module: DBM_CONNECT_PUR
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =SAPDB_DBM_DAEMON
HOST =%%RFCSERVER%%
PROG =dbmrfc@sapdb
DEV_W0
X
X Fri Jun 18 18:05:15 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
N
N Fri Jun 18 18:05:25 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
X
X Fri Jun 18 18:05:39 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X
X Fri Jun 18 18:05:46 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X
X Fri Jun 18 18:05:52 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X
N Sun Jun 20 10:55:32 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
X
X Sun Jun 20 11:00:02 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
N
N Sun Jun 20 11:00:32 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
C
C Sun Jun 20 11:03:34 2010
C Thread ID:1956
C dbmssslib.dll patch info
C    patchlevel   0
C    patchno      13
C    patchcomment Errors when running with par_stmt_prepare set to zero (1253696)
C Local connection used on SAPFIVE to named instance: np:SAPFIVE\ECT
C
C Sun Jun 20 11:03:49 2010
C OpenOledbConnection: line 23839. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), SQL Network Interfaces: Server doesn't support requested protocol [xFFFFFFFF].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C
C Sun Jun 20 11:04:04 2010
C OpenOledbConnection: line 23839. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), SQL Network Interfaces: Server doesn't support requested protocol [xFFFFFFFF].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C
C Sun Jun 20 11:04:19 2010
C OpenOledbConnection: line 23839. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), SQL Network Interfaces: Server doesn't support requested protocol [xFFFFFFFF].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn to np:SAPFIVE\ECT.
C Retrying without protocol specifier: SAPFIVE\ECT
C Connected to db server : [SAPFIVE\ECT] server_used : [SAPFIVE\ECT], dbname: ECT, dbuser: ect
C pn_id:SAPFIVE_ECT_ECTECT_ECT
B Connection 4 opened (DBSL handle 2)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       YES YES NO 000 255 255 20100618 061458 SAPFIVE\ECT
B 000 001 +DBO+0050      000002156 INACTIVE     NO NO NO 004 255 255 20100618 101017 SAPFIVE\ECT
B 000 002 +DBO+0050      000001981 DISCONNECTED NO NO NO 000 255 255 20100620 070023 SAPFIVE\ECT
B 000 003 +DBO+0050      000001982 DISCONNECTED NO NO NO 000 255 255 20100620 070023 SAPFIVE\ECT
B 000 004 R/3*INACT_PACK   000002157 ACTIVE       NO NO NO 004 255 255 20100620 110334 SAPFIVE\ECT
N Sun Jun 20 17:35:35 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
M
M Sun Jun 20 17:47:29 2010
M ThAlarmHandler (1)
M ThAlarmHandler (1)
M ThAlarmHandler: set CONTROL_TIMEOUT/DP_CONTROL_JAVA_EXIT and break sql
C
C Sun Jun 20 17:47:33 2010
C SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was not set. rc: 15
M program canceled
M    reason   = max run time exceeded
M    user     = SAPSYS
M    client   = 000
M    terminal =
M    report   = SAPMSSY2
M ThAlarmHandler: return from signal handler
A
A Sun Jun 20 17:48:33 2010
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Sun Jun 20 17:48:42 2010
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP_BEG entered.
A ** RABAX: level LEV_RX_WRITE_SNAP_BEG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A
A Sun Jun 20 17:48:48 2010
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_WRITE_SNAP_END entered.
A ** RABAX: level LEV_RX_WRITE_SNAP_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Sun Jun 20 17:48:48 2010
A
A ABAP Program SAPMSSY2                                .
A Source RSBTCTRC                                 Line 131.
A Error Code TIME_OUT.
A Module $Id: //bas/701_REL/src/krn/runt/abinit.c#1 $ SAP.
A Function ab_chstat Line 1941.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A Time limit exceeded..
A
X
X Sun Jun 20 17:49:03 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
N Sun Jun 20 18:35:40 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
N
N Sun Jun 20 18:50:35 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
N
N Sun Jun 20 18:55:31 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
N
N Sun Jun 20 19:00:31 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
X
X Sun Jun 20 19:01:59 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X
X Sun Jun 20 19:02:05 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
M
M Sun Jun 20 19:04:02 2010
M ***LOG R49=> ThReceive, CPIC-Error (020223) [thxxhead.c   7488]
M ***LOG R5A=> ThReceive, CPIC-Error (76495728) [thxxhead.c   7493]
M ***LOG R64=> ThReceive, CPIC-Error ( CMSEND(SAP)) [thxxhead.c   7498]
N
N Sun Jun 20 19:05:31 2010
N RSEC: The entry with identifier /RFC/DIICLNT800
N was encrypted by a system
N with different SID and cannot be decrypted here.
N RSEC: The entry with identifier /RFC/T90CLNT090
N was encrypted by a system
N with different SID and cannot be decrypted here.
Thanks
Mani

i have few BG jobs running at backend, but i dont think that could be a problem. I have these jobs running
ESH_IX_PROCESS_CP_20100621051308
EU_PUT
EU_REORG
RPTMC_CREATE_CHANGEPOINT_AUTH
i cancelled the last one and first job is for trex indexing for changed object i SAP hR master data. middle two i dont know the purpose.
do you think these could be problem?
Mani

It's growing on me.

Similar Messages

Maybe you are looking for