Item 10: KMAT / variant could not be replaced

Hi,
We have an issue while creating CRM Quotation for configurable product. while selecting variant matching for product it is not replaced with material variant.
we have entered super model and it is not replaces with material variant.
for ex we created super model 226B123
               materila variant         226b123_1
This material variant is replaced by super model when we create Oppertunity and Quotation individually.
if we create through copy control from Lead to opportunity it is not replaced in Opportunity.
Please help me out to solve this issue.
Regards
kishore kumar
Edited by: kishore kumar on Feb 22, 2011 11:44 PM

Hi,
did you activate automatic variant matching for the configurable prodcut item category?
Var. matching  -> 2 Automatic variant matching
Var.match.act. -> e.g. 1 replacement only by appending
Default Config. -> 1 Execute Default Configuration Automatically
If you do not consider the last option you have to configure the product once before any configuration and variant matching gets triggered. Hope this helps.
Best Regards,
Michael

Similar Messages

  • Error variable could not be replaced

    friends
    we recently went through upgrade to 3.5.
    after the upgrade we are having problems in executing queries.
    one such error says "error variable 0Fyear could not be replaced"
    bascially we have sap exit variable which brings fiscal year. and we have defined offsets on it so that it brings previous two years.
    initially when i enter selection in variable screen i get the message saying error variable 0FYEAR could not be replaced and when i still execute the query i get the result but it shows up the same value for all three years.
    looks like its not taking offsets.
    do u think its got something to do with the variable. since its sap exit variable ?
    thanks

    Bhanu
    as you said it could be because of fiscal year variant.
    after upgrade when i am trying to run a query on my multiprovider i am getting error message saying
    Determination of characteristic Fiscal Year Variant is not permissible
    and in description it says
    in a multiprovider a characterstic value can only be uniquely determined for a character if its been set to same value in all data providers.
    it says one of the cube is not defined with Fiscal year period Z1 (this is the value in all other cubes) and has to be defined.
    i have a multiprovider which is actually pulling data from 4 cubes. as per the procudure given from the error message this is what i have done
    infocube definition---time charactersticsextras-structure specific properties of infoobject.
    under constant column i have Z1 value for fiscal year variant. i deleted this value for the multiprovider. and i was able to run queries on the multiprovider.
    for all my cubes in update rules fiscal year variant is defined as constant Z1. but still under structure specific properties of infoobject in respective infocube i see it only for 3 cubes and for one cube its missing.
    now since this problem came up the other solution what i have is to set Z1 for all the cubes under my multiprovider.
    though the system is open the column constant is greyed out. and i actually tried to transport from dev but for some reason i am not able to.
    for all my cubes in update rules. fiscal year variant is defined as constant Z1.

  • Layout: Error UPP_LB062 Variable could not be replaced in row

    Hi everyone,
    I'm quite new in Planning and tried to create a simple manual planning layout in SEM-BPS on a BI 7.0 system, using two characteristics as lead columns and three characteristics as header.
    For one of the characteristics (Calendar year/month) in the lead columns I tried to enter a variable (settings: characteristics=Calendar year/month; text replacement=medium; replacement type=fixed value; restictions of values required by user=true; selection conditions=some values of Calendar year/month)
    but after selecting the variable name it is deleted from the row and the error message UPP_LB062 appears with thext "Variable ... could not be replaced in row"
    Do you have any idea what is wrong here?
    Thanks a lot for your help!!
    Thomas

    All I needed to do was to execute "Set Variables in order to select values for my user.

  • Why do I keep getting this error code..."some of the purchased items on the iphone could not be transferred to your itunes library because you are not authorized for them on this computer" I have tried everything in trouble shoot, nothing changes.

    I have a iphone 3GS 16 GB that is currently working on version 4.3.5. I'm having major battery issues and need to take it in for repairs but can't because I can't get the system to back up all my information first. Every time I try to sync or back up or update my apps it gives me that error message in the title. I have unauthorized, and reauthorized the computer. I have changed to another, completely new computer which was also authorized. i have been using the same account since I first got the phone, and never backed it up on any computer before.
    IF I can make the back up work, will it also save my existing text messages and entries in the notes app? I'm about to go to the android system because from all the errors and issues that I am seeing listed in here and on other forums, seems like Apple has been neglecting their products a lot.

    @ deggie, I wasn't threatening ANYONE. I was simply saying how frustrating this has become, seeing how I have been trying on my own to figure this issue out for more then a month with no results. Like I said in the beginning, I have not used any other account to purchase apps or other products on my phone. I have only ever used one account. There are 23 apps that are saying they can't sync. It directs me to authorize the computer, which I do but it doesn't change the outcome. If I proceed, I lose those 23 apps correct? Do I also lose all my text messages saved, and other things such as documents in the "notes"?

  • I got a message saying that 420 items in my library could not be synced. How do I fix this?, I got a message saying that 420 items in my library could not be synced. How do I fix this?

    I have about 800 songs in my itunes library and only 300 are syncing onto my iPhone. Is there a way to fix this?

    when i go into the music file under my iphone in itunes, the songs that will not sync are grayed out with the frozen icon next to them

  • The iPod could not be synced because this computer is no longer authorized for purchased items that are on this iPod.

    Full message that pops up
    "The iPod could not be synced because this computer is no longer authorized for purchased items that are on this iPod.
    To authorize this computer for items purchased from iTunes Store, choose Store > Authorize This Computer."
    I am unable to sync my music, applications, movies, etc. to my iPod touch. The only way I am able to bypass the message that pops out when I try to sync (the one in the title) is by clicking "Apply" instead of "Sync". To do this, I make changes to Apps, Music, or Movies (...) and the buttons "Revert" and "Apply" will replace the button "Sync".
    My problem is most likely not due to using many accounts because I only have one and it is the only one that I use. I do not share accounts with my family members. Still, I have tried everything here, nothing has worked for me. Since I don't often listen to Podcasts, I have deleted them from my iPod. I have no idea why I am unable to sync and no one seems to have the same problem as me.
    Thank you for your help in advance.
    Details
    iPod touch, 5th generation
    iOS 8.1.2
    iTunes 12.0.1.26
    Windows 8
    Purchases
    Pre-ordered album "Froot" purchased from the account that is authorized to my computer
    Podcast "Not Too Deep with Grace Helbig" also purchased from the account that is authorized to my computer

    Try backing up to iTunes and restoring from that backup

  • Dynamic Action, validation check, on an Item, could not use Change event

    I am learning how to use Dynamic Actions in a 3.2.x app that was upgraded to 4.0.x. I wanted to share what I learned adding client side validation with these actions. Perhaps an Apex guru could suggest an easier method to use this feature.
    I have an existing function where a user selects multiple rows in a report page, and then assigns a single status and enters justification text for the selected rows in another page, then saves changes (via submit).
    One item, justification, is required. I replaced my JavaScript validation of an empty value, e.g., P10_JUSTIFICATION.value, with a dynamic action. The Change event was a candidate for this item, with the "is not null" Condition. However, it is possible to initiate this screen to review the status, overlook the justification text and immediately select a button to save changes. No Change event has fired. The Before Page Submit event was applicable here. This Event selection in the wizard does not provide the Item for definition and then the Condition wasn't the right context though available for selection. I selected JavaScript expression for the Condition, actually entered my original JS test expression, and created one True Action. The True action displays an Alert to tell the user that required text is missing.
    Test of this DA was not completely successful. The alert appeared but the page went on to submit anyway. I found I had to add another True Action, Cancel Event, to stop the submit. The DA was then successful.
    The Apex site examples, [http://st-curriculum.oracle.com/obe/db/apex/r40/apexdynactions/apexdynactions_ll.htm] , do a great job showing use of Change and Set Value events for Items but a user may not always navigate through items. These features were promoted for developers with no to little knowledge of JavaScript to use Apex for application development. This DA required using/understanding JS anyways.
    My next step is to implement actions on a tabular form that that has required values. It is disconcerting that I have read in the forum that the column value references such as f0x and its row number are required to get it all working (as a DOM or JQuery selector). I have already found that tabular form columns can be re-ordered from v3.2.1 to 4.0.x. I was hoping I could declare dynamic actions or simpler Javascript methods that would not rely on f0x array references.
    Thanks,
    Kelly

    It is disconcerting that I have read in the forum that the column value references such as f0x and its row number are required to get it all working (as a DOM or JQuery selector).Not necessarily. One possibility is to use descendent jQuery selectors to attach the dynamic action event handler by column heading:
    td[headers="HIREDATE"] input

  • The operation could not be completed because an item with the name xyz already exists

    I am trying to make a click and drag backup on an external FAT 32 drive to compliment my Time Machine backup (long story) and I've done this each time by dragging my critical folders into the drive. I get a message asking me to stop, replace or skip, and whether to apply to all items. i click replace, apply all, and let it go.
    however, one stubborn folder refuses to comply. every single time I click and drag a group of folder that includes that one, I get a message saying "the operation could not be completed because an item with the name xyz already exists" even after I selected the the "apply all" prompt. at which point, the Mac stops transferring ALL the other files.
    I figured, OK, i'll just transfer the other folders individually and then deal with this folder later. so I do that, and once I get to the offending folder, I try to transfer just that one folder into the drive. no good; I get the operation message again. I decide to just transfer the contents of the folder, rather than the folder itself. No good, I just get the operation message about one of the folders within the main folder.
    anyone know the cause, or at least a fix?

    If you've installed a system modification called "TotalFinder," remove it according to the developer's instructions after backing up all data. Log out, log back in, and try again.
    Otherwise, open the Info dialog on both the source and the destination volumes. What is the Format of each? For example, it might be "Mac OS Extended (Journaled)".
    For some other possible solutions, see:
    operation can't be completed because an...: Apple Support Communities

  • Acrobat v10x CS6 Installation: "Some items could not be installed and then Error 1301

    Brand new MacBook Pro Retina 16GB, 512SSD, Mountain Lion.
    I successfully installed all apps in CS6 Web and Design Premium EXCEPT... I had a warning on Acrobat install: "Some items could not be installed properly".
    However, Acrobat 10.0.0 launches and runs fine. Then, I try to move on and upgrade to 10.1.4 (or even 10.0.1) and no matter whether I uninstall and reinstall, repair disk permissions, talk to Adobe support for four times now and let them try everything, I'm still getting Error 1301 "The update could not be applied because Adobe Acrobat application contents were modified since the original installation. I had them send me a hard copy of the CS6 Suite and reinstalled the entire suite. Again, ALL other apps run and upgrade perfectly EXCEPT Acrobat.
    Now, support tells me to use the "Run Repair Acrobat Installation to replace missing files." from this advisory and call them back later (file:///Users/mbp/Desktop/extras/maccomputers/Errors%20and%20freezes%20%7C%20Adobe%20Rea der%20%7C%20Mac%20OS.webarchive).
    Here's the latest hitch: There is no such:  "Repair Acrobat Installation". I'm thinking they think there is and there isn't.
    Also, in details this:
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW006, DW050 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 4 error(s), 0 warning(s)
    ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ----------- Payload: {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro  10.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Acrobat Professional: Install failed
    ERROR: DW050:  - Acrobat X Pro : Install failed
    Any wisdom out there which is not in the "experimental" arena would be appreciated.

    Hi,
    Thanks for the advice. Tried this and does not work. Exact same results. I really wonder if I am the only person with a MacBook Pro Retina with an 512GB SSD running Mountain Lion that has tried to install Acrobat 10.0.0. I think there is some conflict with Mac OS 10.8.2 that is hostile to the installation sequence Adobe created for Acrobat. I fear Adobe would rather I upgrade to Acrobat X1 than spend their time patching this.
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW006, DW050 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 4 error(s), 0 warning(s)
    ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ----------- Payload: {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro  10.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Acrobat Professional: Install failed
    ERROR: DW050:  - Acrobat X Pro : Install failed

  • Missing Camera Roll - iCloud "Some items could not be restored"

    After having some problems with my previous ipad 3, I had it replaced and tried restoring everything from iCloud. Everything went seemingly well until a pop-up appeared saying "Some items could not be restored." Everything seems to be accounted for except for the camera roll which looks to be about ~50MB or less. The backup for my ipad is 260MB while only giving me ~210MB after iCloud is "finished" restoring.
    I have tried troubleshooting it by restoring my ipad and then using different backup versions of the ipad on two different networks (school and home) with no results. Unfortunately I never started photostream or even thought of backing it up manually through my itunes. (I used my ipad straight out of the box when I got it ) The "explanation/resolution" that apple gives me is "Some data such as Camera Roll photos, videos, and app data was not successfully restored from the backup. Wait a few minutes and then attempt the restore again while connected to a reliable Wi-Fi network," which is clearly not working.
    Has anyone else gotten this error before? Any troubleshooting ideas?
    Thank you in advance,
    Alex

    I think we cannot trust iCloud, at least not for backups...
    Same problem here, except that's I have an iPhone 3GS and most apps doesn't install after download (they reach 100% "waiting..." and disappear right before install). I'm trying since may, 25 - no result.

  • Error when deleting file: Could not find this item. This is no longer located in ...

    We are setting up a new Windows 2012 server. Users access this server using a 'terminal services'. We have mapped some folders from a legacy server (different domain). Using group policy preferences, we map this folder as a drive for a user.
    When user wants to delete some files, he get's the error: 'Could not find this item ..' The error is displayed to the user and it looks like the file can't be deleted. But when I press the F5 (refresh) button, the file is gone. My problem is very similar
    to a problem in the following post: http://social.technet.microsoft.com/Forums/windowsserver/en-US/042e747a-0e25-4190-b0a2-82f3e9635eb0/can-not-delete-file-error-is-could-not-find-this-item?forum=w7itprogeneral
    When I create 'txt' (or 'pdf', 'zip') file, i can delete it without the error. When I create 'xlsx', 'docx', 'pptx', 'bmp', 'jpg', I get the error.
    Does somebody have an idea, how can I fix the cause of this problem? (I can't tell to users to hit the F5 button everytime when they face this issue)
    Thank you for your help in advance!
    Juraj

    Hi,
    Please check if the problematic files’ filename ended with a dot. If so, you could refer to the article below to troubleshoot the issue:
    Solved: “Cannot read from the source file or disk”
    http://blog.dotsmart.net/2008/06/12/solved-cannot-read-from-the-source-file-or-disk/
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • IPad could not be Synced because it is no longer authorized for purchased items that are on iPad

    I recently purchased an IPAD AIR and synced ir with my comuter. 14 days later I try and SYNC it and I get a message " The IPAD could not be synced because this computer is no longe authorized for purchased items that are on this IPAD. The apple id's are the same and only 2 devices authorized. Meessage states to go to STORE and Authorize Computer. When I do I get a Message it is already authorized

    The problem appeared to be a Pending Request on the IPAD for the new ICLOUD option to share Keychain. I cleared that up and it appears that fixed the issue. Thanks for your help

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information.

    I started getting these errors on one of my lists that has several workflows running on it. The strange thing is it has been running pretty much error free for 1.5 years and we have not made any changes to the workflows and no updates have been applied prior
    to the errors staring.
    It is typically always the same workflow but it doesn't always happen, only some of the newly added list items will error. If I simply cancel the current instance and manually start it again it runs fine to completion and it only seems to error out
    at the start.
    Most of the other workflows pause/wait for a status change but I will be reviewing all the workflows to confirm there is no locking conflict. I have added a Wait to one other workflow that I know will update the list item on startup, it is populating
    the Title column but even after that I am still getting the error.
    I noticed in the TraceLogs, 2 errors that started on Feb 2 and I could not find them in any previous logs (went back many days with no occurrences).
    02/02/2015 07:15:55.93  w3wp.exe (0x1C50)                        0x18D4 SharePoint Foundation        
     Workflow Infrastructure        88xr Unexpected WinWF Internal Error, terminating workflow Id# 6cbf1da4-fbf9-4dfe-ae48-b6d765cc6d03 
    02/02/2015 07:15:56.37  w3wp.exe (0x1C50)                        0x2140 SharePoint Foundation        
     SPRequest                      8l3a Medium   Failed to cache field with id "{49af83c9-c5e3-47db-b055-bf18673bba67}", overwrite=0
    The "Field ID"{49af83c9...} listed is a Lookup column to a Clients list on the same site.
    Any suggestions on what could be causing the sudden errors. I will be reviewing all other workflows but as I mentioned previously, this system has been working great up until Feb 2 with no changes to the lists or workflows for 3-6+ months.
    Thanks in advance.
    Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

    Thanks for the quick response Nikhil.
    Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
    Site Lists
    Engagements = 4456 (Errors on this list, primary list for activity)
    Tasks = 7711  (All workflow tasks from all site lists)
    Clients = 4396  (Lookup from Engagements, Tslips, etc)
    Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
    Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
    A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
    Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

    Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
    working fine and no changes were made to the workflow.
    I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
    to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
    are), but we still cannot figure out why the workflow is still throwing this error.
    We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
    The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type. 
    The form associated with the list was modified in InfoPath 2010. 
    Approvers would provide their approval in the InfoPath form which is then read by the workflow.
    Side note - items created after the workflow throws this Unknown Error some seem to be working fine. 
    We have deleted the item in question and re-added it with no effect. 
    Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
    Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
    Cheers

    Hi,
    I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
    If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

       I got error  "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I  found out the cause is  Update Item action       
    I need to update item in another List call Customer Report ,the field call "Issues"  with data type  "Choice"   to yes
    then the error arise .   please help..

    Thanks for the quick response Nikhil.
    Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
    Site Lists
    Engagements = 4456 (Errors on this list, primary list for activity)
    Tasks = 7711  (All workflow tasks from all site lists)
    Clients = 4396  (Lookup from Engagements, Tslips, etc)
    Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
    Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
    A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
    Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

Maybe you are looking for