Item line data not flowing into SAP Adobe form layout

Hello Gurus,
I am currently working on adobe form layout for a sales document in SAP, i have created a master page
as well as a couple of pages in the design view. Data at the header level are working properly, but the item data
are not flowing into the layout, as nothing appears in the print preview for the item level of the sales document.
I have done all the necessary binding with all the right field names, my subform to the best of my knowledge seems to be well
defined, but yet to no avail.
  I would like to know what yet could be the reason for this issue and how i can go about fixing it.
Thank you.
Ahm.

Hi Vijai,
In our project, we have the same requirement but I am one step behind than you. I am able to generate the PDF form but not able to generate the data. Means all the fields are coming as disabled fields.
Can you please send your code as a sample code so that I can have a look at that and check where I am doing wrong/missing. My id is sandeep.kamdar in gmail
Thanks & Regards,
Sandip Kamdar

Similar Messages

  • Data/Work Flow in SAP

    Hi All,
    Plz. explain the Data/Work Flow in SAP
    Is there any difference between this if so explain,
    and kindly tell me the process.
    thank you,
    Narender

    Hii..
    Work Flow- SAP Business Workflow
    Purpose
    SAP Business Workflow can be used to define business processes that are not yet mapped in the R/3 System. These may be simple release or approval procedures, or more complex business processes such as creating a material master and the associated coordination of the departments involved. SAP Business Workflow is particularly suitable for situations in which work processes have to be run through repeatedly, or situations in which the business process requires the involvement of a large number of agents in a specific sequence.
    You can also use SAP Business Workflow to respond to errors and exceptions in other, existing business processes. You can start a workflow when predefined events occur, for example an event can be triggered if particular errors are found during an automatic check.
    SAP provides several workflows that map predefined business processes. These workflows do not require much implementation. For an overview of these SAP workflows, refer to Workflow Scenarios in Applications.
    Integration
    SAP Business Workflow uses the existing transactions and functions of the R/3 System and does not change the functions. You can combine the existing functions of the R/3 System to form new business processes with SAP Business Workflow. The workflow system takes over control of the business processes. If you are already using SAP Organizational Management, you can use the organizational structure created there to have the relevant agents carry out the individual activities. It is possible to have an activity carried out by a position. This ensures that the respective occupiers of the position can carry out the individual activities during execution of the workflow. This means that personnel changes in your organization are taken into account immediately in the execution of a workflow.
    Features
    SAP Business Workflow provides a number of tools for defining and analyzing workflows as well as for monitoring operation.
    The Workflow Builder is for displaying and making changes to workflows. You can make small extensions directly to the original workflows supplied by SAP, such as carrying out your own agent assignments or changing deadline monitoring.
    There are several Workflow Wizards to support you in the definition of workflows, with which you can create specific parts of a workflow. The Workflow Wizard Explorer gives you an overview of the existing Workflow Wizards.
    In order to make the functions of the R/3 Systems available to a workflow, you use business objects, which you can define and analyze in the Business Object Builder. These business objects are made available to the workflow in reusable tasks. The Business Wizard Explorer gives you an overview of all existing tasks.
    The end user receives information about the activities they are to carry out in their Business Workplace. This provides them with a central overview of all the activities that they are authorized to carry out. They can commence the activities from here.
    Several tools are available to the workflow system administrator, with which they can control and analyze the current workflows. The workflow system administrator is notified of problems automatically by the system.
    DATAFLOW-Data flow means flow of data from one module to another within a sap system.
    Regards,
    Aakash

  • Tax and pricing info are not flowing into Idoc orders02-eledp04 and 05

    Hi,
    We are carrying out SRM5.5 -SUS and ECC6.0 Integration using PI 7.
    We are configuring for the MM-SUS Scenario.
    Now,to accomodate the Tax / Pricing we have installed the add on
    component LOCINSUS and we are having doubts on how to use it:
    1) Tax and pricing information are not flowing into IDOC- orders02
    (e1edp04 and e1edp05 segments are not present in the created IDOC). The
    condition print indicator in checked on ECC System and we have also
    implemented SAP note 995986.
    2)In create ASN transaction , we are not able to see the Excise Invoice
    Number and Date field in Basic data tab as expected from SAP Library
    document although we have installed the Localization Add on component.
    Please help us to reso1ve these issues,
    Regards,
    Mani
    099890-22217.

    Mani,
    Did you resolve this issue, because we are having the same issue in ECC6 with IDoc ORDERS02.
    If you did resolve this issue could you please let us know how, much appreciated.
    Bill.

  • Customer receipts and payments are not flowing into PS module

    Dear Team,
    I am new to the PS module..... Customer receipts and payments are not flowing into PS module. Kindly let me know the missing configuration steps.
    Thanks !!!

    Sagar Kapadia wrote:
    > 1) What is the pre-requisite configuration for activation of Commitments and Project Cash management in the PS system?
    > 2) Is there any word of caution which needs to be kept in mind at the time of activation?
    > 3) once activated, what will the impact on the data? Are there any chances of data inconsistency?
    >
    Only one pre-requisite is the creation of FM area.
    As I suggested earlier, please read SAP help which will answer all your queries.
    Please follow the below path...
    SAP Help Portal >>> SAP ERP Central Component >>> Financials >>> Project System >>> Payments >>> Project Cash Management.

  • Billing document are not flowing into FI and COPA

    Hello SAP CO gurus,
    please help me out by giving possible reasons why Billing document are not flowing into FI and COPA.
    what are the settings need to check?
    is there any option to get release by manual?
    Initiatives rewards with points........
    Regards
    Chandra.

    Hello Chandra,
    Check whether any standard cost estimate is existing for that material for which your billing. If it is there then check whether costing key from COPA is able to access the cost estimate.
    I am also working on the same issue but not solved yet.
    regards
    Nivas

  • Revenue values are not flowing into COPA

    Dear Experts,
             We are processing the MTS normal scenario. Here the revenue values are not flowing into COPA when FG sale. But when we process the Raw material Sale values are flowing to COPA smoothly. Here the SD condition Type, Revenue Account and COPA value Field same for RM and FG.
    May I know the exact reasonu2026.
    Please suggest me in right wayu2026.
    Regards,
    Balaji Bhonsle.

    Hi Balaji bhau
    I guess the issue might be with your Item Category in SD.. Is it set relevant for billing??
    See if the Billing Type has been entered in KE4W and the VF reset for it
    Check in VFX3 if the invoice is lying there for any error.... Try to release the Billing to accounting and you may get the error message
    br, Ajay M

  • Gross & Net Weight not flowing into sales order

    Hi all,
    When i am creating a sales order the Gross weight and Net weight is not flowing into the sales document. i have checked the material master it was maintained properly and item category also it is checked.
    if you have any solution please post.
    thanks in advance
    Sri

    Hi,
    The unit you're using into sales order is the same of material master?
    If not, the unit conversion is mantained in material master?
    What kind of material type r you using?
    There are "order quantity"? (sorry for that silly question...)
    I think when double checking those itens probably you will find the solution.
    Regards,
    deme

  • Group Memberships not Flowing into Metaverse

    Hello,
    I'm trying to figure out why the group member attributes in the CS are not flowing into the MV.  Here's what I have:
    An HR system running on SQL Server
    A staging database that extract data from the HR system
    The staging database has a table representing person object
    The stating database has a table representing person multi-valued attributes (i.e location, job code, etc)
    The staging database has a table representing group objects
    The staging database has a table representing group memberships (mult-valued)
    A SQLMA connected to the person and person multi tables
    A SQLMA connected to the group and group membership tables
    All group memberships are based on job codes and locations.  There are no approval process in place.  If they have this job code, they get certain groups.  That's all calculated in the staging database and the memberships are in the group membership
    table
    This system does connect to AD (and a few other things), but I'm not concerned with that, right now.
    I've read 100 articles on this, most of them over 5 years old, and tried the ones that made sense.  The flow from the database into the CS works well.  No issues there.
    But, a search of the metaverse for the group shows an empty member attribute.  The sync process is not throwing any errors.  At least they're not showing up in the sync service app or the event logs.
    Where allowed, I'm using rules extensions for everything.  I can't use a rules extension to set the member attribute because it's an rdn.
    I'm going to move forward with this by extending the metaverse schema and adding a multi-valued string attribute named "memberOf" to the person object.  Then, I'll modify my existing MA to use that attribute instead of the member attribute. 
    I'm not sure what kind of issues I'm going to run into when exporting that to AD.  I'll cross that bridge when I come to it.  I don't anticipate that being an issue as the dns for all these objects will be calculated by the ADMA based on locations,
    group functions and person types (bascially, I don't care about the MV rdn).
    Anyway, I'm looking for some real world insight on this.  This whole effort is to migrate off an existing IDM system that works very, very well but quite expensive to license.
    Thanks,
    Greg Wilkerson

    Hey Cameron,
    I have total control of all the DB tables FIM is accessing.  I build them up as part of IDM process.
    I've read this article, along the many others that address the "manager" scenario.  This really doesn't apply in this case as the user and group objects are loaded in separate MAs.  Getting reference values to flow with both object live in the
    same CS shouldn't be an issue. 
    I also saw a solution where the group and user objects were in the same table and differentiated by the "object_type" value (user, group).  That solution solved the issue of the groups and user being in the same CS.  As I grow tired of my daily
    FIM beatdown, that solution is growing more attractive.  That's a major DB redesign, and seems quite inefficient.
    The multi-value table for group memberships already exists in the DB.  For FIM purposes, I transferred that data into the user object multi-value table.  See screen shot.  I can certainly configure the group MA to access that multi-value table
    and load the group members as references.  But, because the group MA CS will not contain the user objects, I don't see how the references will be set.  If the reference value isn't set in the CS, it's not going to flow into the MV (at least I haven't
    figured out a way to set the an reference value for an object in the MV - my problem all along.
    This whole "setting a reference value" encompasses much more than just group memberships in my implementation.  Telephone resources and physical access (key cards, etc) are provisioned through the existing eDirectory system.  These objects exist
    in our current IDM system and are associated with users based on rules.  So, the reference value process is something I need to figure out, if I'm going to use this product.
    Maybe I could use a stripped down ECMA2 as a "staging" CS, export the users and groups into this CS and assign the reference values, then import the groups back into the MV, memberships intact.  I'm not sure that would get me where I want to go, and
    it seems like a lot of extra "stuff" to solve what should be a simple problem.  Hmmmmmm.  Or, connect the ECMA2 directly to my group membership multi-value table in the DB.  Hmmmmmm.  I'd still have to export the groups and users into that
    CS, but the import might be much more straight forward.  Hmmmmmm.
    The structure of my GroupMembership table (both columns are anchors or directly translatable to anchors):
    EmployeeGroups
        GroupName varchar(50) not null,
        EmployeeID nvarchar(50) not null,
        ID int identity(1,1) not null

  • Upload data from Excel into SAP CRM using webservices

    Hi,
               I want to upload the data from EXCEL into SAP CRM using a web  service, can anyone say me the process and also how to map the excel and the source code structures.
    Thanks,
    Sanju.

    Try the following :
    Class: CL_GUI_FRONTEND_SERVICES
    Method: GUI_UPLOAD
    Thanks
    <b>Allot points if this helps!</b>

  • Excise Duty Base Amount not flowing into ARE -1

    Dear Friends,
    While Iam creating ARE-1 for the Exports Excise Invoice - Excise Duty Base Amount not flowing into ARE1
    thanks
    Sasi

    Dear Lakshmipathi,
    Earlier Liable to AT1 is ticked but not Indicator NCCD,I have checked after ticking the NCCD as well....
    In my pricing procedure i dont have the NCCD condition .....as its not required.
    In classify consditiontypes: I have maintained PR00 condition type as well along with Excise condition types...Do i need to maintain this PR00 anywhere else
    or
    Is there anything I need to do with the assesable value.......if so how should be the entry like in the pricing procedure?
    Can someone please provide me the solution...its very urgent
    Thanks
    Sasi

  • Material delta changes are not flowing into CRM

    Dear All,
    material delta changes are not flowing into CRM, because the product hierarchy on material has been changed to a new product hierarchy. I do not want to download again the object DNL_CUST_PROD1 because it maight cause inconstancies in CRM. (I have already defined some z product hierarchies in CRM)
    Do I need to create the new product hierarchy also in CRM manually?
    Appreciate any inputs
    Raj

    Hi Raj,
    Use the transacrion R3AR2 to create a z object for DNL_CUST_PROD1 and assign DNL_CUST_PROD1 as the object name
    Then in request detail screen for new z object enter the details like table name (T179 in your case) and the name of the product hierarchy that you want to bring in. Save the transaction
    Then use the transaction R3AR4 to initiate the download for your new z object as you normally do in R3AS.
    Then go to SMW01 and reprosess the struck Bdoc.
    Reward points if helps,
    Regards,
    Paul Kondaveeti

  • Baseline date not flowing in MIRO transaction

    Hi
    Baseline date not flowing in MIRO while doing transaction.
    We have maintained Payment terms in vendor master record
    and payment terms maintained in PO also.
    We have done the GR posting.
    please help
    Thanks and regards
    Aakash

    Are you use an MIRO with amount split? and does your payment term is configured with "No Default Date'? Then refer to OSS 495303.

  • CVD & ADC not flowing into MIGO.

    Hai all,
    For the Import purchasing, i did the MIRO to capture the customs & CVD values. But while doing GR, CVD & ADC values are not flowing into MIGO ( it should be shown in BED & AED ) respectively. I have maintained this condition types JCV1 & JADC in Excise default settings also. Is there any notes are available for this error?. Please throw your lights

    Hi,
    Please check J1ID, whether we have maintained material and chapter id combination and cenvat determination. Secondly check the MIRO no. you are entering while doing MIGO. Sometimes it happen, that the miro number entered during MIGO different that of actual MIRO.
    Ishu

  • Local currency is not posted into SAP

    Hi,
    I am using the program 'RFBIBL00' for postings into SAP from leagacy file after validations. For this I am facing one issue.
    CURRENCY - USD
    AMOUNT    - 12345.12 (example)
    for this postings , the amount  in local currency  is not posting into SAP and the amount in local currency is recalculated by SAP at the exchange of system.
    Please help me for this how to post local currency into SAP.
    regards
    SVR

    Hi,
    Which field in BBSEG structure you are passing the amount field to? Did you use BBSEG-DMBTR?
    Regds,
    Rudra

  • Symbols do not flow into InDesign from standard text file

    Within our application, we have the option to type in symbols within a text editor. Symbols include the copyright, registered, and trademark symbols. We then take the text that is typed in and merge the text to a standard text file, then place that file within InDesign CS3. At one think those symbol flowed in perfectly, but recently those symbols do not flow into InDesign on their own. What could be causing this problem.
    Any body have any thoughts?
    Thanks,
    Brian

    You can get these three (serif) characters in Symbol with
    <0xF6D9><0xF6DA><0xF6DB>. Your three characters come in pink (which
    means they don't exist in the font). It could be that they used to work
    because you had a different Symbol font loaded. I always seem to have at
    least three Symbol fonts (T1, TT, OT) going, even though I try to only
    have one.
    But why bother with the font change? These characters are ANSI: © ALT
    0169, ® ALT 0174, ALT 0153. You should be able to see them in your
    text editor and in just about every decent text font.
    Kenneth Benson
    Pegasus Type, Inc.
    www.pegtype.com

Maybe you are looking for