Item master - processing lead time vs po_asl_attributes - processing lead time
hi.
would greatly appreaciate if somebody can explain the relationshipship between mtl_system_items.processing_lead_time (item master) vs
po_asl_attributes.processing_lead_time (approved suppliers list)
which one takes precedence.
thanks in advance
zj
The asl takes precedence
Similar Messages
-
Hi
Does Lead Time in Item Master respect weekends and only count working days?
Meaning, for two weeks do I enter 10 or 14?
Thanks
FranzHi Franz
As far as I know, NO. You only have the option to include holidays in the MRP wizard itself which will then calculate against lead times. Best would be to test on a test database with both scenarios (with 10 or 14, and tick/untick holidays in MRP) and see what the results are.
According to the Online Help the above is correct:
Consider Holiday Table for Production Planning Factors in holidays and weekends in lead time calculation, as defined in the Holiday Details window. Holidays and weekends increase the lead time interval for MRP calculations.
Consider Holiday Table for Purchase Planning Factors in holidays and weekends in lead time calculations, as defined in the Holiday Details window. Holidays and weekends increase the lead time interval for MRP calculations.
Kind regards
Peter Juby -
Report to display Average time taken for processing payments".
Hi,
I have been asked to develop a report for "Report to display Average time taken for processing payments".
Could any one guide me technically what are the different tables i need to take to generate the report. Treat this is very urgent. Pls provide sample code too....
Thanks in advance....Given below is the set up for credit card payment processing:
Set Up Credit Control Areas:
Define Credit Control Area
Transaction: OB45
Tables: T014
Action: Define a credit control area and its associated currency. The Update Group should be 00012. This entry is required so the sales order will calculate the value to authorize
Assign Company Code to Credit Control Area
Transaction: OB38
Tables: T001
Action: Assign a default credit control area for each company code
Define Permitted Credit Control Area for a Company
Code
Transaction:
Tables: T001CM
Action: For each company code enter every credit control area that can be used
Identify Credit Price
Transaction: V/08
Tables: T683S
Action: Towards the end of the pricing procedure, after all pricing and tax determination, create a subtotal line to store the value of the price plus any sales tax. Make the following entries:
Sub to: A
Reqt: 2
AltCTy: 4
Automatic Credit Checking
Transaction: OVA8
Tables: T691F
Action: Select each combination of credit control areas, risk categories and document types for which credit checking should be bypassed. You need to mark the field no Credit Check with the valid number for sales documents.
Set Up Payment Guarantees
Define Forms of Payment Guarantee
Transaction: OVFD
Tables: T691K
Action: R/3 is delivered with form 02 defined for payment cards. Other than the descriptor, the only other entry should be 3 in the column labeled PymtGuaCat
Define Payment Guarantee Procedure
Transaction:
Tables: T691M/T691O
Action: Define a procedure and a description.
Forms of Payment Guarantee and make the following entries Sequential Number 1
Payment Guarantee Form 02
Routine Number 0 Routine Number can be used to validate payment card presence.
Define Customer Payment Guarantee Flag
Transaction:
Tables: T691P
Action: Define a flag to be stored in table.
Create Customer Payment Guarantee = Payment Card Payment Cards (All Customers can use Payment Cards).
Define Sales Document Payment Guarantee Flag
Transaction:
Tables: T691R
Action: Define the flag that will be associated with sales document types that are relevant for payment cards
Assign Sales Document Payment Guarantee Flag
Transaction:
Tables: TVAK
Action: Assign the document flag type the sales documents types that are relevant for payment cards.
Determine Payment Guarantee Procedure
Transaction: OVFJ
Tables: T691U
Action: Combine the Customer flag and the sales document flag to derive the payment guarantee procedure
Payment Card Configuration
Define Card Types
Transaction:
Tables: TVCIN
Action: Create the different card types plus the routine that validates the card for length and prefix (etc )
Visa , Mastercard, American Express, and Discover
Create the following entries for each payment card
AMEX American Express ZCCARD_CHECK_AMEX Month
DC Discover Card ZCCARD_CHECK_DC Month*****
MC Mastercard ZCCARD_CHECK_MC Month
VISA Visa ZCCARD_CHECK_VISA Month
The Routines can be created based on the original routines delivered by SAP.
*****SAP does not deliver a card check for Discover Card. We created our own routine.
Define Card Categories
Transaction:
Tables: TVCTY
Action: Define the card category to determine if a
payment card is a credit card or a procurement card.
Create the following two entries
Cat Description One Card Additional Data
CC Credit Cards No-check No-check
PC Procurement Cards No-check Check
Determine Card Categories
Transaction:
Tables: TVCTD
Action: For each card category map the account number range to a card category. Multiple ranges are possible for each card category or a masking technique can be used. Get the card number ranges from user community. Below is just a sample of what I am aware are the different types of cards.
Visa Credit Expires in 7 days.
400000 405500
405505 405549
405555 415927
415929 424603
424606 427532
427534 428799
428900 471699
471700 499999
Visa Procurement Expires in 7 days.
405501 405504
405550 405554
415928 415928
424604 424605
427533 427533
428800 428899
Mastercard Credit Expires in 30 days
500000 540499
540600 554999
557000 599999
Mastercard Procurement Expires in 30 days
540500 540599
555000 556999
American Express Credit Expires in 30 days
340000 349999
370000 379999
Discover Card Credit Expires in 30 days
601100 601199
Set Sales Documents to accept Payment Card Information Transaction:
Tables: TVAK
Action: Review the listing of Sales Document types and enter 03 in the column labeled PT for each type which can accept a payment card
Configuration for Authorization Request
Maintain Authorization Requirements
Transaction: OV9A
Tables: TFRM
Action: Define and activate the abap requirement that determines when an authorization is sent. Note that the following tables are available to be used in the abap requirement (VBAK, VBAP, VBKD, VBUK, and VBUP).
Define Checking Group
Transaction:
Tables: CCPGA
Action: Define a checking group and enter the
description. Then follow the below guidelines for the remaining fields to be filled.
AuthReq Routine 901 is set here.
PreAu If checked R/3 will request an authorization for a .01 and the authorization will be flagged as such. (Insight does not use pre-authorization check).
A horizon This is the days in the future SAP will use to determine the value to authorize
(Insight does not use auth horizon period).
Valid You will get warning message if the payment card is expiring within 30 days of order entry date.
Assign Checking Group to Sales Document
Transaction:
Tables: TVAK
Action: Assign the checking group to the sales order types relevant for payment cards
Define Authorization Validity Periods
Transaction:
Tables: TVCIN
Action: For each card type enter the authorization validity period in days.
AMEX American Express 30
DC Discover card 30
MC Master card 30
VISA Visa 7
Configuration for clearing houses
Create new General Ledger Accounts
Transaction: FS01
Tables:
Action: Two General Ledger accounts need to be created for each payment card type. One for A/R reconciliation purposes and one for credit card clearing.
Maintain Condition Types
Transaction: OV85
Tables: T685
Action: Define a condition type for account determination and assign it to access sequence A001
Define account determination procedure
Transaction: OV86
Tables: T683 / T683S
Action: Define procedure name and select the procedure for control. Enter the condition type defined in the previous step.
Assign account determination procedure
Transaction:
Tables:
Action: Determine which billing type we are using for payment card process.
Authorization and Settlement Control
Transaction:
Tables: TCCAA
Action: Define the general ledger accounts for reconciliation and clearing and assign the function modules for authorization and settlement along with the proper RFC destinations for each.
Enter Merchant IDs
Transaction:
Tables: TCCM
Action: Create the merchant ids that the company uses to process payment cards
Assign merchant ids
Transaction:
Tables: TCCAA
Action: Enter the merchant ids with each clearinghouse account -
My itunes will not work at all. i have deleted and reinstalled in over ten times, i have ended the process, i have reinstalled quicktime i few times, i have deleted many folders such as TEMP, itunes helper et What else can i do? Please help:(
Now it sometimes keeps coming up and working but once i plug an ipod in it freezes my whole computer up and no i dont get any response from itunes at all
-
How to delete multiple process at a time in a Process chain
Hi,
Is there any option to delete multiple processes at once in a Process chain in BI 7.0 ?Hi Swetha,
If u want to stop a perticular proces go to sm37 give user ID (If process chain is schduled then give user ID as ALEREMOTE and if u have triggered it manually then give ur ID) select time and other options like type of process means whether it is active, canceled, ready etc. U will get ur running job.
In sm37 at top of the screen u will get options to cancel or stop active job. But before deleting the active job just
check the job log and also check the business impact.
Also u can not use one process variant in multiple
Regards,
NR -
Dump while Executing Hrast_dT (Design time of HCM Process and Forms)
Hi All,
I am getting Syntax Error Dump while Executing Hrast_dT tcode (Design time of HCM Process and Forms) and here with i have mentioned the source code also ist contained in standard class.
*METHOD constructor.
DATA:
badi_context TYPE REF TO lcl_badi_context.
CALL METHOD super->constructor
EXPORTING
form_scenario = form_scenario
form_scenario_service = form_scenario_service.
DATA:
t5asrfscnsrv_wa TYPE t5asrfscnsrv.
SELECT SINGLE * FROM t5asrfscnsrv INTO t5asrfscnsrv_wa WHERE form_scen_srv EQ form_scenari
ASSERT sy-subrc EQ 0.
ASSERT t5asrfscnsrv_wa-service_type = 'GENSRV'.
fill_table_metadata( ).*
i followed this link also..its not working for me..
[Re: Assertion_Failed dump when accessing Design Time for Processes & Forms EP3]
Regards,
ParthiHello Parthasarathi,
Please, try to implement the note 1075650. -
Date & Time in Item Master Creation
Dear All,
Is there any option to identify the created time and date of Item master data in SAP item master form itself ?
Thanks,
Bhoopathi.KHi,
You can get create date of Item master.
SELECT T0.[CreateDate] FROM OITM T0 WHERE T0.[ItemCode] = 'Enter your Itemcode'
Regards,
Amrut Sabnis. -
How to incorporate time in the Process chain messages
Hi,
I would like to create message after success or failure of process chain with time of failure in the subject.How to put system variable in the message subject?.
Your help will be appreciated.
thanks in advance.
Manjuraj,
thanks for your quick reply but i would like to incorporate the finish time in the mail subject.
for example mail subject is as follows.
"GL process chain has been finished at xx:xx time".
Here time (xx:xx) should automatically read and fill as per the finish time of the process chain.
hope now it is clear.any idea how it can be done?.
manju -
Reschedule of delivery times in delivery processing
Hello!
In the delivery we want the possibility to reschedule the delivery times when pushing the scheduling button in the header processing tab. At the same time we do not want the delivery to be rescheduled if we change one time (for example the loading time and then save the document. What I can find out is that either the system reschedules at both save and reschedule button by setting Rescheduling field to A or Y in the delivery type or not at all by leaving the Rescheduling field in the delivery type blank..
Is there a way to get both functionalities.
Best regards
/BjörnIt landed at East Midlands Airport this morning at 5.38, maybe yours is in the same consignment. Hopefully it will be here today or tomorrow - not sure how quick the turn over is from airport to van and zooming up the motorway to me. Hope they dont take the scenic routes!
-
Clear wsdl cache every time a bpel process call is made.
Hi All,
I have a bpel process which gets input xml of the size of 6MB. This bpel process interacts with a java component using the WSIF approach to reorder the xml input recieved.
The strange problem that i am currently encountering right now is for each time the bpel process execution time scales up. For example, the first time i fired the request, the bpel process took 29 seconds to completely execute. The second time it took 39 seconds and the third time it has taken around 56 seconds to execute.
When i cleared the wsdl cache from within the bpel console, the execution again came down to around 21 seconds.
Can i know which is the property which we can set in bpel.xml file of the bpel process to clear the wsdl cache each time a request is fired.
Thanks in Advance,
Vijay SJay,
You don't say how these links on the menu page are constructed. If you are using an apex list then for each list entry there would be a target page section in which you would put the target page ID in the Clear Cache field. For example, if the link goes to a page in the current application, say page 10, then you'd put 10 in the Clear Cache field.
If you are building a link yourself, just put 10 (for page 10) in the clear-cache position of the f?p URL, e.g.,
f?p=&APP_ID.:10:&APP_SESSION.::NO:10:P10_ITEM:&SOME_ITEM.
Scott -
What is the default time settings in Process chains
Hi,
What is the default time settings in Process chains.
How to set time settings for daily,weekly,monthly loads in Process chains.
What is the time settings that we have to take care when creating meta chains.
Thanks,
Madhu.Hi Madhu,
The Time settings for any PC is done in the start variant of the PC. There is nothing like default time setting. These settings are totally depended on the requirement and system performance. It is a general rule of thumb to load the data during a time when the user activity is minimum as the loading process is going to occupy many dialog as well as background WPs. So, if you schedule them at a time when there are many users on the system, they might feel that the system is slow. Hence, you decide as to what is the best time for scheduling a PC. The same applies to meta chain also. In case of meta chains, you make sure the dependencies of the local chains is also handled. Hope this helps.
Thanks and Regards
Subray Hegde -
When I plug my device into the computer for the first time the setup process doesn't begin. What do I do?
Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Before that, back up your device, explained here:
iOS: Back up and restore your iOS device with iCloud or iTunes
How to back up your data and set up as a new device
You can check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do -
I have tried to update the operating system on my ipad several times without success. Each time it reaches 353.2mb of 353.3mb and starts to process the file. Nothing happens and then I get a message saying the network connection has timed out. The network is still connected.
Have you tried temporarily turning off your firewall and antivirus software whilst the download is happening ? A number of people on here have had success downloading it after doing so.
-
How to stop process chain if it yellow for long time
hello all,
I see that my process chain is running for long time and is yellow for more than last 24 hours now. I can see where the chain is stuck(not going ahead).
What do we normally do in such scenarios?
Also one more question I have is about delete PSA request process variant. Can i use the same variant in two different process chains, is yes than do I have to include the name of the PSA tables that are in both the process chains. When the variant runs in 1st chain does it delete the PSA tables from the second chain as well..(i hope i made this clear)
Thanks in advanceOnce you have done with your init load manually. Then in case it was just the start of the process in ur Process Chain then first remove the chain from schedule and then go to the start process of the process chain and save the setting for immediate, uncheck the periodic box and save and then come out of the screen and then execute and activate the chain.
Note:
1. Before changing the setting in the start process make a note of the start time and also its periodic value.
2. Once the chain is completed then change the setting in the start process back to previous start time and periodic value.
3. Dont forget to save and activate the chain.
Regards,
Rohini -
How do I set photoshop to process raw files in background all the time?
Sometimes when I process my raw files in photoshop it will process them in the background. Other times it will make me wait while the files process until I can access photoshop again. Anyone know why this happens or how I can consistently process raw files in the background? Up to CS5 I think it was an option somewhere but I can not find it now.
Hi eusib43, <br /> Sorry you are having problems.
The redirection blocking feature is really intended to help users that need to use screenreaders and such; rather than being any sort of effective security measure; but some users set that unnecessarily.
* Try '''Firefox Button (or Tools) → Options → |Advanced| → <u>Accessibility</u> →<br /> [] Warn me when Websites try to redirect or reload the page ''' <br />(Wording and exact menu options may differ somewhat)
* See [[Advanced settings for accessibility, browsing, system defaults, network, updates, and encryption#w_accessibility]]'''_accessibility'''
* Does unsetting that solve your problem ?
Maybe you are looking for
-
Help me plz
-
Fan Speeds and Temperatures 24" iMac 2.8GHz
What are the default fan speeds for a 24" iMac 2.8 GHz? Also, what are the 'normal' temperatures for this computer?
-
Crackling sound on Windows 7 x64 with K9N neo V 1.0
Hi I installed Windows 7 x64 ultimate on my computer yesterday and everything worked fine except the audio, I installed the latest realtek drivers from MSI for x64 windows vista/7. But still I got the problem that it play fine and suddenly it "cracks
-
I opened ITV player to watch a program and know it wont close which ever way I try to close it stays there???
-
Querying a BAPI Function Module
Is it possible to write a query on the BAPI Function Module. For example I have a views in oracle database and i can query the views based on some condition and get the required data from the views. In the same way is it possible to query the BAPI fu