Item Prices in the oInventroyGenEntry DTW

Hello,
I am trying to make an Entry with the DTW, In the DocumentLines template there is a field named "Price" , but this price is ignored when i import the document.
Is it possible to set the prices via DTW?
Thanks
Jacobo

Jacobo,
Thats why I suggested you to use oStockTaking DTW template to import the quantities first.
After that Import the Cost of these items using the Items_Prices template found inside the oItems DTW folder.
Once the costs are in, you will use to Initial quantites, ..... and go to Stock Posting tab
Select By Price list in the Price Source for Whse Stock Posting
Select your pricelist where you imported the cost
Refer this thread
oStockTakings / DTW import problems / Initial quantities

Similar Messages

  • Warning on Item price during contract and PO creation

    Hi Experts,
    When I create a contract, I put a material with mat. code and expect the system takes the standard price in the accounting tab of the material master.
    1/  Is there a way the system picks up the price auto. from the material master ?
    i.e. syst. warning during contract creation when I put the mat. code : +Effective price is 0.00, material price is 10.00 + 
    I do not understand why the syst. gives me this message (I have a standard price of 100 in MM and I put a net price of 100 during contract creation)
    2/  During PO creation, the syst. picks up the item price from the contract but I receive this message :
    Effective price is 100.00, material price is 10.00
    Again, I do not understand how the syst. indicates the mat. price at 10 (while I put 100 in MM and 100 in contract item level).
    Could anyone helps on this topic?
    Thanks in advance for your help.

    Any inputs will be much appreciated. Thanks

  • Receiver objectype (B1i 8.8) for price catalog or item price intheGeneral

    what is the receiver objectype (B1i 8.8) for price catalog or item price
    in the Generate of BizPackage and BiU where my sender objecttype is ECC6_Pricat (to be created)?
    Edited by: Elson Wong on Feb 28, 2012 4:35 PM

    If i correctly understood your problem, i think you have to manage (in your trasformation) the section between <Items_Prices> and </Items_Prices>.
      <?xml version="1.0" encoding="utf-8" ?>
    <BOM xmlns:bfa="urn:com.sap.b1i.bizprocessor:bizatoms">
    <BO>
         <AdmInfo>
              <Object>4</Object>
              <Version>2</Version>
         </AdmInfo>
         <Items>
              <row>
                   <ItemCode>AAAAAA</ItemCode>
                   <ItemName>BBBBBBBBB</ItemName>
              </row>
         </Items>
         <Items_Prices>
              <row>
                   <PriceList>1</PriceList>
                   <Price>27.400000</Price>
                   <Currency>EUR</Currency>
              </row>
              <row>
                   <PriceList>2</PriceList>
                   <Price>0.000000</Price>
                   <Currency>USD</Currency>
              </row>
         </Items_Prices>
         <ItemWarehouseInfo>
              <row>
              </row>
         </ItemWarehouseInfo>
         <ItemPreferredVendors>
         </ItemPreferredVendors>
    </BO>
    </BOM>
    BR

  • Problem with Purchase Contract Item Price - 2lis_02_itm

    Hello !
    I used 2lis_02_itm extractor in order to extract the Purchase contracts (transaction me33k in R/3) with Item Prices. The problem is that the extractor takes the price
    from ekpo table but the Contract item prices exist in konp table and its very complicate to calculate the net price.
    Somebody know the solution ?
    Thanks In advance,
    MM. michal

    Thanks for your answer.
    I found out that all the subtotal1-6 are empty in my extractor.
    If you interest I found in R3 transaction  ME3P
    That update the prices from konp in  EKPO and all my problems solved.
    Again thanks , michal

  • Item price on PO form

    Does anyone know how I can display an item price on the PO form instead of the default 1. I updated the item price but when you create a PO the price still defaults to 1
    Thanks
    Roald

    Hello,
    Did you find any solution for this requirement because we have same requirement as below
    Our requirement is to hide the Price field value for SRM Purchase orders those are printed and sent out as mail to Vendor from SRM system.
    Which means, we have to hide the Price filed value in SRM PO Output preview.
    For example, SRM PO is created with line item 1 and price is 1000 EUR then we have to hide the this price value in PO form for printouts as well as mail.
    How to achive this requirement.is there any standard way to control this ?
    Regards,
    Venkat

  • DTW PO Import Item price incorrectly set

    Hi,
    I am facing two issues in PO imports.
    1. Lets say Item price is set to $10 in the Supplier Price List.
        I want to import PO with the Price set to $5.
       I set Unit Price = 5, Quantity =10 and The Purchase Order created is with Price $10 picked up from Price List i.e. Line Total = $100 instead of $50
    Then I supply more information:
    I additionally supply Line total to be $50
    This time Unit Price =10, Price after discount = 5, Linetotal = 50. Now the line total is correct but Discount is 50% which is not correct.
    2. If I can sort out above issue with your help, How can I modify PO Lines with DTW. I tried but it does not allow.
    Any response would bee much appreciated.
    Regards
    Devinder

    Hi Suda,
    Thanks for your response.
    Header fields:
    RecordKey     CardCode     DocCurrency     DocDate     DocDueDate     DocNum     HandWritten
    Line Fields
    RecordKey     LineNum     ItemCode     Price     Quantity     WarehouseCode     TaxCode
    I am using SAP 2007A Pl35 AU localization and the said field in general setting has been taken off by SAP in 2007A (to the best of my knowledge)
    Regards

  • How to update the condition price in the sales order for all the items

    Hi,
    How to update the condition price for all the itmes in the sales order to carry out the new price automatically through a stand alone program, for all the orders in the billing due list table?
    Thanks,
    Balaram

    Hi,
    There is a change in the requirement.
    Scenario:
    I have created a sales order with some 4 condition types, in that 2 condition types are of class A & B and the other two is of class C. Here I need to update the condition price of class A & B only and the remaining condition types should not get update even though there is an updated price is available.
    For the above scenario, I need to write a standalone program. Do we have any function modules to update the price of the single condition in the sales order? Please tell me how we can update the sales order at item condition level.
    Thanks.
    Balaram

  • Error in price at the time of creating SHC fro catalogue item

    Hi
    Cann anyone help me with the following problem.
    Error in price at the time of creating SHC fro catalogue item
    mentioned below article no. 0452202 then a pallet is to cost 3275,05 (you can only order min. 10 pallets).
    The system multiplies up the price by 10 & 10 and at that moment I transfer the shopping trolley it multiplies up again.
    The price for 10 pallets was gladly to be 32720,50 - Buttttttttttttt it turns into 3.272.050.
    Please help me in providing a solution for this
    Best Regards.
    sairam.

    Hi
    Please go through this ->
    Note 739562 Simplified pricing: Price 0.00 if catalog item.
    This is the standard system response as of EBP 3.5 Support Package 05 or Note 569275.
    This also depends on how you uploaded the price in the catalogs ->
    For price details you should use the following characteristics:-
    /ccm/price[1]#/ccm/amount /ccm/price[1]#/ccm/currency_code
    Perhaps you have to maintain field pricechangeable in BADi-InterfaceIF_EX_BBP_CATALOG_TRANSFER in method - ENRICH_ITEM_DATA. This will make sure you can edit the price_
    Other useful pointers ->
    Re: Price determination
    Re: free item shopping from catalogue....product with zero price
    OSS note 550071 - price for catalog product
    How to Upload Price details for a catalog in CCM 2.0
    Do let me know.
    Regards
    - Atul

  • System resets the sales order item price changes after save in VA02.

    Hi All,
    We have implemented automatic credit control at sales order level.
    System is blocking the sales order once saved in VA01.
    But if I do any changes in prices at item level in VA02 and save before credit releasing the sales order then system agian reset to the original prices from pricing condition records.
    Can any body tell me why this is happening? I should able to change the sales order prices manually before releasing the sales order credit block. Is it possible?
    Regards,
    Kartheek.

    Like Lakshmipathi said, you should be able to change the prices in the order even if the order is under credit limit block.
    Please check the condition types which are being changed . In the condition type definition( T Code V/06) for the field Manual Changes - the value should be either "Manual entry has priority" or "....should allow to change manually...".
    Also in your pricing procedure ( T Code V/08) , against your pricing procedure , please select the value for pricing type as ..."copy manual conditions and redetermine others".
    Hope this helps
    Regards
    Sai

  • Enter the price for the service item

    Dear Experts,
    We are implementing SRM 7.0 and we have upgraded our system with Service pack 7.Created a limit SC and approved at all levels. After approving SC system created PO in SRM but did not replicate to backend ECC system. When I looked PO in edit PO mode and system throws an error message "Enter the price for the service item".
    Have any body faced this issue? If yes please guide me how to fix this issue or Suggest me any useful link or OSS messages.
    Thanks in advance.
    Thanks
    Umakanth

    Hello,
    I assume you are using a Product category configured for Extended Classic scenario.
    In this case a limit item in SC creates limit item in PO(in SRM). But when this PO is replicated to R/3, it always creates item with type 'D' for limit item in PO.
    Now with respect to error message you get, can you check if you have specified all LImits (Overall value, Expected value etc)?
    You can also try creating a PO directly in SRM with limit item (use same Product category as above) and see if it replicates.
    If you get the same error, please raise a OSS message for SAP.
    Thanks,
    Sushil

  • Each PO Line Item price should be as per the scale in contract?

    Hi
    I have a PO with 2 line items, both line items are for the same material.As I order 2 different quantities, I get 2 different prices, i.e. per line item. (As per the Scales Maintained in the contract)
    However once I save the PO, and then display the PO, the price is taken for the total quantity. Is there any way that I can have 2 different prices for both materials in the same PO?
    This behaviour has changed in the last 1 month only.
    Earlier in our SAP system each line item had different price as the scale for the ordered quantity in that line item.
    We though it could be due to Group Condition checked in the Condition Type, but that check has been in our system since long time, hence it cannot be the reason.
    Thanks in Advance!

    Yes... this is a standard behavior..
    You can do one option...
    When PO fetch the price from contract, then copy the price and enter it manually again, then PO can remember the price after save..
    Check the similar discussion PO Price update issue

  • BAPI_PO_CHANGE to update the Price for the line item not updating the Price

    Hi,
    I am using BAPI_PO_CHANGE to update the Price for the line item. This BAPI is not updating the Price. I am using external cummit also, but the BAPI is not updating price.
    I am passing following data to the BAPI.
    Plant: CQ11
    PO                   Material                Price
    4500002142     TEST_BATCH     12
    Please provide suggestion.
    Regards,
    Jubin.

    Hi,
    check this link...this has sample code
    [http://www.sap-img.com/abap/sample-abap-code-on-bapi-po-change.htm]
    Regards,
    Surinder

  • Can change the price in the PO line item

    Hello experts,
    I have this Purchase order document where I can change the price in the PO line item(ME22N) where as in the other PO that I have created, changing the price in ME22N is not possible(shaded). They are all the same document type and plant combination. For the PB00 condition type configuration, It is set to D- not possible to process manually.
    Please help.

    Thanks for your answer. Yes i am aware of that, basically the settings is what the price indicated in the info record and as long it is included in the validty periiod then when you create the PO, that price will be detected by the system. i am clear for that, my issue is why there are some materials that i can change the price in the PO directly while the others are the pricing tab is disabled(cannot change the price)
    Settings in the SPRO-MM - PURHASING- CONDITIONS-DEFINE PRICE DETERMINATION PROCESS- DEFINE CONDITION TYPES PB00 is D(NOT POSSIBLE TO PROCESS MANUALLY) but stilll the system is showing some PO's that can be changed the price

  • Summing up the price of the sub items and put it in the Higher level item

    Dear Experts,
            I have got one requirement from my customer.
    The requirement is while creating the Sales order (in VA01), in the line item the customer will enter the Material, Quantity and Higher level item for the line item.In Condition Tab page price and Condition will be entered.
    My requirement is at the time of saving the sales order the price of the lower level items has to be summed up and this price has to be put in condition tab page of the higher level item.
    This is my requirement.Is it possible?if yes please explian me how to do this.
    If anybody not able to understand my question please reply back to me.
    Thanks & Regards,
    Ashok.

    Hi
    Here u need to find user exit that suits ur requirement like user exit that will trigger while saving that sale order and in that user exit u are able to access that tables where all the lower level item prices stored and condition table where price stored. Then u can do sum and update that sum into condition price table. So search for user exit that suits ur requirement.
    Regards,
    KP.

  • Requisitioners do not know the price of the items - Work Around Required

    Hi,
    The users who raise the Requisions at my company, they do not know the price of the items to be procured at that time. To get the prices you need to go through RFQ and quotation cycle which comes after raising the Requisition
    So the requests are raised to the Procurement department via emails and consequently the RFQ and Quotation flows are handled manually outside the system. Once the prices are finalized they are placed on the Requisition and the PO Autocreated.
    We would like to go through the whole flow in PO Module. Can you one suggest a work around or solution to the problem
    Thanks

    at one of my clients, implementation was going on
    and they had the same issue
    the workaround sandeep gave is practicable but if you see the standard way, a requisition is made first followed by an RFQ, quote and finally a PO
    But some ppl dont want to go into RFQ to quote cycle
    so what we did at that company was that the users raising requisitions unaware of the price entered a zero amount, and some used the list price that defaults from item master.
    The buyer who is actually aware of the market enters the price there for that item ..If he is not sure about the price due to any reason, suppose due to unstable market or high fluctuations in price than he negotiated price on phone with thier routine suppliers for years and got the best price.
    if purchasing history is seen, it is based on PO
    If item price history or average trend is seen,its based on PO
    all of the baove is justa work around since you asked for one
    well there are other workarounds too
    hope this helps youu
    Muhammed

Maybe you are looking for