Warning on Item price during contract and PO creation

Hi Experts,
When I create a contract, I put a material with mat. code and expect the system takes the standard price in the accounting tab of the material master.
1/ Is there a way the system picks up the price auto. from the material master ?
i.e. syst. warning during contract creation when I put the mat. code : +Effective price is 0.00, material price is 10.00 +
I do not understand why the syst. gives me this message (I have a standard price of 100 in MM and I put a net price of 100 during contract creation)
2/ During PO creation, the syst. picks up the item price from the contract but I receive this message :
Effective price is 100.00, material price is 10.00
Again, I do not understand how the syst. indicates the mat. price at 10 (while I put 100 in MM and 100 in contract item level).
Could anyone helps on this topic?
Thanks in advance for your help.

Any inputs will be much appreciated. Thanks

Similar Messages

What parameters to be set during installation and DB creation

i am going to create 10g/ 2003 server database and
migrate from 8i / 2000 server ( 15 gb) running in archive log mode.
what parameter i have to set and check
( SGA,PGA FLASH_ REC ,performance tuning parameters etc) during installation and database creation.
santhanam.

I know there are huge amount of docs out there but I collected these links in real upgrade tasks/experience...
[Oracle® Database Upgrade Guide 10g Release 2 (10.2)|http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/toc.htm]
[Oracle Metalink: Complete checklist for manual upgrades to 10gR2 Note:316889.1|https://metalink.oracle.com/CSP/main/article?cmd=show&type=NOT&id=316889.1]
[Oracle Metalink: Rule Based Optimizer is to be Desupported in Oracle10g Doc ID: 189702.1|https://metalink.oracle.com/CSP/main/article?cmd=show&type=NOT&id=189702.1]
[Oracle Metalink: Database Upgrade Companion|https://metalink.oracle.com/cgi-bin/cr/getfile.cgi?p_attid=466181.1:upgrade_guide1]
[Oracle Metalink: Managing Rollback/Undo Segments in AUM (Automatic Undo Management) Doc ID: 135090.1|https://metalink.oracle.com/CSP/main/article?cmd=show&type=NOT&id=135090.1]
[Oracle Metalink: Managing CBO Stats during an upgrade to 10g or 11g Doc ID: 465787.1|https://metalink.oracle.com/CSP/main/article?cmd=show&type=NOT&id=465787.1]
[Oracle Metalink: Complete Upgrade Checklist for Manual Upgrades from 8.X / 9.0.1 to Oracle9iR2 (9.2.0) Doc ID: 159657.1|https://metalink.oracle.com/CSP/main/article?cmd=show&type=NOT&id=159657.1]
[Oracle Metalink: Instructions to Upgrade Context on 8.0.6 to either 8.1.7 interMedia Text or 9.2 Oracle Text upon database Migration from 8.0.6 Doc ID: 209544.1|https://metalink.oracle.com/CSP/main/article?cmd=show&type=NOT&id=209544.1#Migration%20Plan%20for%208.1.7%20Using%20interMedia%20to%209.2]
because I would consider upgrading...
Edited by: Kecskemethy on Oct 2, 2009 2:19 AM

Plant selection missing from dropdown during PR and PO Creation

Hi Everyone,
Good day!
I am currently experiencing problems during PR and PO creation. Everytime I try to access the list of selection for the plant field, the system does not display any entries. (In our sandbox client)
In our dev box, I was able to perform the 2 fucntions succesfully. Can you guys please help me check what would be the issue for this? What would be the procedure that I should follow to investigate this concern?
Best regards,
DeLo

Hi,
It is up to the consultant who is configuring the system to decide how it ahould be done... one dev 1 TR or many dev 1 TR.
Say now you have created 2 TR's for plant creation and plant assignment.
The TR's should move in to other client has it is created.
now for example ur plant assignment TR is moved first and then the plant creation. the other client in which it was moved will contain only plant creation that is it has our assignment TR is overwritten by the 1 TR which is plant creation.
Usually consultants do it this way.
1 TR - Org Strusture
1 TR - Purchasing
1 TR - Inventory
1 TR - Invoice
1 TR - Valuation and AAD
and so on..
Thanks & Regards,
Kiran

How to map values between Contract and Purchase Order...

Hi friends,
We are using SRM 5.0 (ECS). I am facing a problem with Purchase Order.
. I am creating Contract locally through Live Auction. After that I am creating Purchase Order through Live Auction. So in Purchase Order Quantity, Net Price, Gross Price, and Long Text etc. not coming which is defined in Contract. PO capturing the values from Live Auction, means no relation between the Contract and Purchase Order. After making Contract again I have to changes in the Purchase Order.
So how to map the values from Contract to PO in SRM? I want to map between contract and Purchase Order like R/3. At the time of creation of PO ( in R/3 ) we can adopt the Contract so all the relevant values comes from Contract to PO. In SRM how will I do?
Please suggest me.

When you create PO and a contract from a Live Auciton, they will not be mapped.
While creating a PO (BBP_POC - Process Purchase Order); in the PO line item assign the contract and item reference. Only then they will be linked.
Hope this helps.
Regards
Kathirvel

Absolute condition value in contract and release order

Hi,
We are creating quantity contract. When a absolute condition (value) is entered this value is considered for release qty in the contract for calculating the unit price.But when a release order is created for this contract, the same absolute value is for the PO quantity due to which there is a difference in unit price between contract and PO.
Please advice.
Regards,
Pratap

Hi,
Verify you steps, find link below:
http://help.sap.com/saphelp_470/helpdata/en/75/ee0f4d55c811d189900000e8322d00/content.htm
Reetesh

Add additional tab on item level in contract for customer fields

Hi Guys,
Does anyone know if the following is possible in SRM 7.0, and if so can you please give a very short description how to accomplish this -
In addition to the standard tabs available in the contract (general data, notes, conditions etc.), is it possible to add a new customer specific tab on item level, in a central contract and add some customer fields to this tab?
I know it is possible to add customer fields in SRM, but I am curious if I can create a new tab for these fields, so that I can group all customer fields together in one place.
Thx.
Kind Regards,
Skander

Yes. it is possible but you have to take care of in the back end too and how these fields comes and sit in ECC. so that you may need to map in the IDOC or XI data . so that these information must be pssed to ECC and available and accordingly you need to change in purchase order too since all these data will be copied into purchase order too.
for example :- if you add one field in header level /item level of contract
and it must be coppied into Backend contract as well as your next consecutive docuemnt like Purchase order must be taken care. hope you understand now.
Muthu

Catlog item price is not updated after pubishing catalog sucessfully

Hi,
Hi All,
Our user has updated catalog item price for sullplier and published successfully long ago, but when ever user creating Shopping cart fro that catalog then item price is still showing old price instead of new price.
Request you to any one advice me, how to solve this issue?
Many Tnaks,
Venkat

is the TREX running ??
In your SRM system go to transaction SM59 and under TCP/IP-Connections search for destination called
TREXDEFAULT_REG, double-click on it and click on connection test button (your destination might have a different name).
Please check following table entries.
/CCM/D_CTLG_REQ SE
/CCM/D_IDX_META inactive index
/CCM/D_IDX_CHAR any entries for inactive index ?
are u publshing the entire master catalog ?? or part of it ??
thanks
-Adrivit

Item category in contract

what is item categery in contract can any body help me .

hi,
You can check the allowed item catagories for contract and its previous reference doc.. which is defined in the SPRO settings:
SPRO --> MM --> Purchasing --> Contract --> Define document types....
Here inside, you can choose the type of document and see its link to the purchase req.....
Hope it helps...
Regards
Priyanka.P

IProcurement cart says item price cannot be a negative value

Hi All,
I'm trying to pass an XML shopping cart from supplier hosted site to oracle iProcurement. However, it keeps telling the buyer that the item price is negative (and it should not be ofcourse).
I'm following the manul exactly and I'm sire the price is positive. Please see below.
Can anyone help?
Also i should mention that the cart content is URL-encoded when passed back to oracle i Procurement.
<price>
     <currency>
          <![CDATA[USD]]>
     </currency>
     <unitprice>
          <![CDATA[9.99]]>
     </unitprice>
</price>
Thanks in advance
chad

Hi All,
I'm trying to pass an XML shopping cart from supplier hosted site to oracle iProcurement. However, it keeps telling the buyer that the item price is negative (and it should not be ofcourse).
I'm following the manul exactly and I'm sire the price is positive. Please see below.
Can anyone help?
Also i should mention that the cart content is URL-encoded when passed back to oracle i Procurement.
<price>
     <currency>
          <![CDATA[USD]]>
     </currency>
     <unitprice>
          <![CDATA[9.99]]>
     </unitprice>
</price>
Thanks in advance
chad

Copy items of service contract

Hello Friends,
I am looking for any FM or BAPI which let me copy the items of service contract and then let me update this newly coped service contract ?
Is there any FM to do so ?
Regards,

Hi Shah,
You can use the FM CRM_ORDER_MAINTAIN and then CRM_ORDER_SAVE(to save your progress) to create as follow-up and/or change(copy in your case) -- maintain your contracts...
Hope it helps..
Please reward points by selecting a star..

Service line item History for Contracts with item cat - D and Acc Assg P

Hello Gurus,
We have a situation where we create contract with item category D (Service) and account assignment category P (Projects). And for the line items of the PO we have difference services (without a service master) and each service line item has the price and quantity and other required fields. Now it is required to change the price or the quantity or both for this service line time and again (business requirement).
The task is to to track the price changes and the quantity changes that have happened to the serive line item from the original and we require the report to diplay the original price and the present price on the service line.
The question is: Is there a standard report in SAP to handle this? Or which are the tables where a service line items history is stored so that it can lead to a development.
Regards - SS

Hi Pankaj,
We are using a Percentage based case (Prorata case)
For Eg : For Eg for 65% (65KAI )material Price 1000 Rs
If the Purity percentage varies payment will be done as per the same. For eg : for 70% (70KAI ) Price 1200 Rs. (approx)
In this case unit of measurement is KAI (kilo active ingredient) .
Actually we are dealing with dealer price where duties are entered Inclusive of the total price and entered at the time of making GR. and the payment is made as per the same;
we have one po for 5000 MT. where we received material at first time Qty being 1993 MT.The duties manuallyentered are as follows :BED :24,167.00
AED : 7,076.00
ECS : 483.00
SECES : 242.00
These duties are flowing correctly in MIRO
and the MIRO has been Posted and payment is also made.
But while the balance quantity 2982 kg we received next time and those duties are as flowing as follws:
BED : 36160
AED : 10587
ECS : 723
SECS : 362
But here at the MIRO the following duties are flowing instead of above
BED : 36,526.08
AED : 10,694.18
ECS : 730.32
SECS : 365.66
What might be the error at this stage.
waiting for solution at the earliest .
Regards,
Girish.C.M.
09377077122

Each PO Line Item price should be as per the scale in contract?

Hi
I have a PO with 2 line items, both line items are for the same material.As I order 2 different quantities, I get 2 different prices, i.e. per line item. (As per the Scales Maintained in the contract)
However once I save the PO, and then display the PO, the price is taken for the total quantity. Is there any way that I can have 2 different prices for both materials in the same PO?
This behaviour has changed in the last 1 month only.
Earlier in our SAP system each line item had different price as the scale for the ordered quantity in that line item.
We though it could be due to Group Condition checked in the Condition Type, but that check has been in our system since long time, hence it cannot be the reason.
Thanks in Advance!

Yes... this is a standard behavior..
You can do one option...
When PO fetch the price from contract, then copy the price and enter it manually again, then PO can remember the price after save..
Check the similar discussion PO Price update issue

Problem with Purchase Contract Item Price - 2lis_02_itm

Hello !
I used 2lis_02_itm extractor in order to extract the Purchase contracts (transaction me33k in R/3) with Item Prices. The problem is that the extractor takes the price
from ekpo table but the Contract item prices exist in konp table and its very complicate to calculate the net price.
Somebody know the solution ?
Thanks In advance,
MM. michal

Thanks for your answer.
I found out that all the subtotal1-6 are empty in my extractor.
If you interest I found in R3 transaction ME3P
That update the prices from konp in EKPO and all my problems solved.
Again thanks , michal

MM Pricing Schema - Contract item price not picked

Hi All,
For a certain Material and Vendor, when there is a Info Rec Condition and Contract Condition maintained, I thought having the Key table for Contract (016) above the Key table for Info Rec (017) in the Access Sequence for PB00 would take the Contract Price over the Info Record. Also the "Exclusive" ind is set fo both key tables in the access sequence.
When I goto the pricing analysis, I see "Access not made (initialized field)" message with a yellow exclamation appear for the Contract Item key table row in the Access Sequnce.
Why is this? Any idea?

Hi,
It seems that valid Condition Record for the key combination specified for the Contract has not been picked by the system.
In Access Sequence, you will define which fields the SAP system should check in searching for a Valid Condition Record.
Please check the fields mentioned in the access for Contract and try to maintain the condition record with those field values for the Contracts. Then, you will get the price from the Contract prior to Info record.
Regards,
Narayana.

Item Category Completion rule and Copy Control for contract reference

Hi
We are creating sales document wrt contract. The item category completion rule for item category WVN is C i.e. item is completed after target quantity is fully referenced.
We dont want to change this but we want that even if the target quantity is fully referenced one particular type of sales document should still be allowed to be created with reference to this contract.
Please guide how can I achieve this.
Thank You
Brajendra Shrivastava

Hi
Is it possible to remove the item category completion rule and then restrict one particular document type or item category for only one time reference . In other words to apply completion rule at document type or tiem category level.

Warning on Item price during contract and PO creation

Similar Messages

Maybe you are looking for