Item substitute and on hand quantity control

Hi all!
I've a problem...
I've an item in a BOM with no on-hand quantity ( or little reserve..) but I've another item that can substitute the first one with its availability... how can oracle WIP (and MRP Workbench) understand this?
I try with "substitue" in BOM but it doesn't work ( what does it need for????? ).
Any ideas?
Thanks!
Silvia
Message was edited by:
Silvia
Message was edited by:
Silvia

Hi, Silvia
Arumugan is rigth. In fact, MRP doesn't work with substitute items. APS can plan substitute items, MRP doesn't.
When you set BOM with the substitute information, it's only documentational. In other words, you need to change in WIP the items you'll consume in that work order.
Regards,
Ricardo Cabral

Similar Messages

Inventory items -- serial and non-serial

I am facing one problem.. i have defined the item ..in item master and declared it serial control item and then i assigned this item to my different Orgs.... now my i want to make this item .. non-serial ... how can i do that ...is there any way out??
Thanks for helping and guiding...
Junaid

hi,
check this link may be help you
http://scn.sap.com/thread/1608016
Regards,
PK

How to get the current On-Hand Quantity of an item?

Hi,
I want to get the on-hand quantity of items from backend,
When i use the table mtl_onhand_quantities :
SELECT msi.segment1, msi.organization_id, SUM (moq.transaction_quantity)
FROM mtl_system_items_b msi, mtl_onhand_quantities moq
WHERE moq.organization_id(+) = msi.organization_id
AND moq.inventory_item_id(+) = msi.inventory_item_id
and moq.ORGANIZATION_ID = 1006
and msi.SEGMENT1 = '14003-0063'
GROUP BY msi.segment1, msi.organization_id
I get a quantity that is different than the one i get from front end. (On-Hand Quantity Screen)
The mtl_onhand_quantities shows quantities when received only , but it doesn't count the transactions done on the item.
How can i get the correct current on hand quantity of an item ?
Thanks,
Joe

I think you guys in this way are getting only the on hand quantity that we inserted when we first created the item...
I think we should also calculate whatever transactions happened on that item ..
i found this little program, please let me know if you think it's the correct way :
FUNCTION CF_LAST_BALFormula RETURN NUMBER IS
v_onhand_qty NUMBER;
v_last_qty NUMBER;
v_target_qty NUMBER;
BEGIN
SELECT SUM(transaction_quantity)
INTO v_onhand_qty
FROM mtl_onhand_quantities_detail
WHERE inventory_item_id = :inventory_item_id
AND organization_id = :organization_id
AND subinventory_code = :Subinventory;
SELECT NVL(SUM(Transaction_quantity),0)
INTO v_last_qty
FROM mtl_material_transactions
WHERE inventory_item_id = :inventory_item_id
AND organization_id = :organization_id
AND subinventory_code = :Subinventory
AND trunc(creation_date)>= :p_last_date;
v_target_qty:=(v_onhand_qty)-(v_last_qty);
RETURN( v_target_qty);
EXCEPTION
WHEN OTHERS THEN
RETURN 0;
END;

On hand quantity exists or there are open delivery transactions for this item

Hi all,
on hand quantity exists or there are open delivery transactions for this item in oracle apps at the master item copy from & lines status in Transaction Form in Backordered.
Thank You

Hi,
Make sure you completely receive the PO, then you should be good enough to convert the item to expense.
Thanks
-Arif.

Mismatch in InStock Quantity in Item Master at Item level and W/H Level

Hi,
      All,
            I get some mismatch in 'InStock Quantity' at Item level and W/H Level, in Item Master.
           for Some Item and mismatch increases day by day.
ex:          At one total item Instock Qty : 100
               but in W/H 1 InStock Qty :   -80
               in W/H2 InStock Qty :   -2
Please give me reason for such a problem and also, solution to overcome this problem
Thanks
Vivek Kumar Gaurav

Dear Gordon,
Thanks for replying me.Yes,there are multiple add-ons are running on client. There is no work done with SAP inventory. So you can consider that it's a problem of vanilla SAP B1.
Warm Regards
Vivek Kumar Gaurav

Import Substitute and Related Item relationship via Import Manager

Hi! I have been able to import parent/child relationship (captured in an Excel spreadsheet) via the Import Manager. I have tested with BOM and Sales Packages and it worked fine.
However, I now also want to be able to import relationship such as substitutes and related items and found out that this feature is not available in Import Manager. I cannot do this via matching in Data Manager as there is a similarity in the part number used. However, I guess it may be possible if I introduce a new field to somehow link them together.
Has anyone tried to do a mass load of relationships like these before? If so, would appreciate if you can share your experience in this.
Cheers!
SF

Have to import via Data Manager using a text file. It is important to note that there should be no blanks after the last header field and data line.

Backorder although on-hand quantity exists

When I perform Pick Release step, the Order status becomes Backorder, although on hand quantity for the ordered item exists. In Exceptions, I got:
WSH_PICK_BACKORDER - Pick Release process could not allocate 1 of item test01 for order 49 as there was insufficient quantity available Or Inventory allocations have failed, and the line has been back ordered.
I saw on the forum that many other persons had this problem, unfortunatelly, none of the advices found here worked.
Does anybody have any other idea?
Thanks.

Hi Out of my exp on OM with different projs.
i had found these cases which causes order to get back ordered.
Any issue related to Back ordering will defenitely fall 1 among these cases
1.     Check in Shipping Transaction Form, make sure the order still in “Ready to Release”.
2.     There might be a lot of possibilities for this problem:
i.)     Order on hold
ii.)     Do not have enough qty
iii.)     Lot expired
iv.)     Wrong reservation (even inventory have enough qty)
v.)     Inventory reserved for other orders.
vi.)     Inventory picked up by other orders
vii.)     Previously return to stock not done properly.
3.     Case 1, check if the order is on hold. Check the order type in Shipping Transaction Form ® “Detail” ® “Source”.
4.     There is another way to check the order type. That is go to WMS Control Board ® “Picking”.
5.     Or go to OM Shipping View to see the order type.
6.     Go to the correct “Sales Order View” instant accordingly by keying in the order# and order type.
7.     Click on “Open Order” ® “Action” ® “Additional order info”.
8.     Do the same for order level and line level.
9.     Case 2 & 3, go to Material Workbench to check if the lot has expired or not having enough inventory for this order.
10.     We can check if any lot is reserved for other order as well.
11.     In Material Work Bench, go check for each lot in the physical locator by clicking on the “Attribute” button. (lot level reservation)
12.     Alternatively, go to Shipping Transaction Form ® OM Shipping View, or go to “Lot Number” (Ctrl + L), click on Attribute column to check the SO reservation of the lot.
13.     Compare the SO info with the order that are having problem.
14.     Case 4, go “Reserve Supply” form (Ctrl + L) to check if the order is wrongly reserved.
15.     Case 5, in the “Reserve Supply form, we can check if the qty is being picked up by other order as well. (order level reservation regardless of lot)
16.     Also, can go to Material Workbench ® Availability, to check for the available to reserve.
17.     Case 6, it might have high possibility the qty is taken up by order with different line, or other orders which have been auto launched.
18.     If this is the case, must do backorder.
19.     Go to Transact Move Order Form ® tab “Pick Wave” ® View/Update allocation ® Lot/Serial.
20.     Click on the checkbox for order which need to be backordered, then go to Tool ® Back Order Line.
21.     Case 7, ask the user if the order has done return to stock previously.
22.     If yes, it might has high possibility that the return to stock not done properly.
23.     Check the lot state, must be in “Resides in inventory”.
24.     Check in Material Workbench to see if the lot is still packed with LPN or not.
25.     Check also if the lot is in physical locator rather than logical locator.
Thanks,
Raj

Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers in fbcj

Hi all ,
I have a requirement to Post Cash Journal Document using FBCJ tcode.
Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers
for exp:
pk   GL a/c   description       amount   cost center profit center
40 400101 telephone exp   500        1403            P 1000
40 400101 telephone exp    100       1404            P 2000
50 200100 cash in hand      600-
   This is My requirement is it possible in fbcj
    Please suggest me.ASAP.
Regards
   Naresh.

Hi,
This you can do it in two ways:
1. Make three header under top level....one Product A, 2nd Product B ( as Billing element) and third as Common expense ( only cost). Now 1st & 2 nd WBS, you have to have sales order linking with individual lint item, for third you will accumulate all the common expense till the period end then make a reposting of the same in desired proportion to both products WBS hierarchy
(This is if you want to have a track on the common expense as well.......like planning, budgeting & control)
After this reposting, run RA for individual billing element and hence you will all the complement detailing and control over Revenue and expense with respect to Product A and Product B individually.
2. If you don't want to maintain that kind of detailing the common expense and keep track of it through project, then have cost centers accordingly and make an assesment/ distribution with respect to expenses accumulated at those cost centers for the period to the respective WBS under each product. Then execute the period end processes for the project.
Or
You can try with have two more line items in the costing sheet as an overhead against common expenses with respect each product.
I hope this should help you.
Regards
Avisek Bhardwaj

Projected on hand quantity calculation logic

Hi ,
I am trying to extract information for projected on hand quantities.
Here were my findings
1. MTL_SUPPLY_DEMAND_TEMP
this table has one column called ON_HAND_QUANTITY which stores Projected on hand quantity based on accumulating supply and Demand ( as per trm), However this table is a temporary table and data is also session specific, data will be gone once the session get closed.
2. From Inventory user guide I got a point that "The projected on hand quantity of the item is , defined as Current Available + all future sources of supply and - all future sources of demand."
Now my question is
a. Is there a direct table for calculating projected on hand quantity in application.
b. How do I calculate current available quantity then future source of suuply and future sources of demand.
Thanks in advance

Hi:
~ There is no direct table to get the projected inventory details.
~ Current on hand Qty for a given item shall be obtained from ON HAND QTY table.
For calculating the future supply upto a patricular date, all the expected supplies such as Receipts, Jobs, Internal SO transfer, etc to be considered.
For calculating the future demand, qty required for SO demand, forecast demand, ISO demand etc to be considered.
Projected Inventory = Current Stock (OHQ) + Expected Supply - Expected Demand.

On hand quantity conversion

hi all,
i am fairly new to the e-biz suite and recently i have been assigned the task of on hand quantity converion (using interface) program.
can anyone help me regarding what all should be done(i.e, wat are the prerequisites for this task that i should know) or else if anyone could provide me with the materials so that i can understand .
recently i have done the inventory item conversion and also the category assignment. now i need to do this. please help me regarding this issue.
thanks in advance,
Basavraj

The first prerequisite is that you post in the correct forum.
Please edit your initial post and change the subject to "Please Ignore."
Then post your inquiry in the EBS forum.
Thank you.

On-hand quantity.

Hi All,
When i query to see the on-hand quantity for a item, it does not show me any. The form was doing that earlier but it does not do now.
Was wondering if any profile option/role has anything to do with it. M on R12
Ashish

I have OHQ in all of the sub-inventory for the items.
But some how it would not enable the buttons on the form to view the availability...
I checked the tables they look perfect, but the form is greyed and it would not show up any data.
THis is not specific to one sub-inventory its happening for all of them..
Any suggestions...
Ashish

View On-Hand Quantity in various kind of UOM

Hi all. I need to know if I can view the on hand quantity in diferent UOM (primary-secondary and all conversions configured by item)
thanks a lot
11.5.10

Can you post a link?

Difference between My Procurement Substitutes and Manage Substitute rules

Hello,
I have question regarding SRM 7.0 Substitution for Shopping cart approval workflow. We have defined Process Controlled Workflow (BRF) for Shopping carts.
There are two ways substitution which i am seeing.
1) Go under Personalization --> User Account --> "My Procurement Substitutes" and then add Person as substitute.
2) Under Work item There is tab called "Manage Substitution Rules"
Could you please advise what would be suitable option to place Substitution once some approver is going on vacation...
Thank you
Ritesh

Hello,
Procurement substitutes are linked to team purchasing functionality. Check the following link:
http://wiki.sdn.sap.com/wiki/display/SRM/Team+purchasing
Substitution rules are related to approvers substitution. Check following link:
http://help.sap.com/saphelp_nw70/helpdata/en/0b/1fc20097b74c41b38621ec2a9454bb/frameset.htm
Regards,
Ricardo

The impact and the difference item group and warehouse

Dear All,
I am confusing what is the difference between item group and warehouse in continuous stock system and perpetual system and their impact in accounting flows. I have explored and read manual pdf files but still fail since I have heard one of addon can only apply or use if the gl account by is warehouse.
I appreciate your answer. TIA
Regards,

Hi..
A warehouse is a commercial building for storage of goods. Warehouses are used by manufacturers, importers, exporters, wholesalers, transport businesses, customs, etc. They are usually large plain buildings in industrial areas of cities and towns. They come equipped with loading docks to load and unload trucks; or sometimes are loaded directly from railways, airports, or seaports.
Storage bin management          Warehouse movements (product)
Planning and monitoring          Control of WM system and
Inventory control               automated control systems
Stock placement into the warehouse occurs after you or the system has generated a Transfer Order (TO). This Transfer Order will direct you to a location in the warehouse where to get the goods and where to place the them. Once you close out the TO and verify the quantity the system will reflect a new location.
A storage unit type groups loading
equipment with similar properties, for example europallets, wire baskets,
or tanks. Europallets are defined as storage unit type europallet, wire
baskets as storage unit type wire basket, and so on, in Customizing for
each warehouse number.
with regards,
hari kv

Display Purchase order, PO Item , Order Number ,entry sheet quantity ,entry sheet price ,invoice quantity, invoice price against each line number

hello all,
i have an ALV report requirement like this,
on the initial screen i have displayed(for a given agreement number like in ME33K )
in the selection screen i have taken agreement number as EKPO-EBELN.
purchase document number        item number        short text        target quantity      net price
5400000019                                  1                      xxx                  1.000                  304300.00
                                                    2                     xxxx                 1.000                  500000.00
the above fields i have taken from EKPO table.....
and on double clicking the item number i have displayed
line number          service number       short text           quantity    units    gross price   quantity released
1                           swr10                   xxxx                 2.00          kg          500             2
2                           swr11                    xxxx                5.00          EA         500             2
the above fields i have taken from ESLL (esll-extrow, esll-srvpos, esll-ktext1 , esll-menge etc......)
this i have done by passing EBELN to ESLH and getting PACKNO and passed this PACKNO to ESLL.
now my question is i need to display Purchase order, PO Item , Order Number ,entry sheet quantity ,entry sheet price ,invoice quantity, invoice price
against each line number above.....
from which table do i need to take these fields.....
please guide me....
thankq....

Thanks Andra,
The problem is the multiple invoices is for non goods receipt item so there will be no delivery.At the time of creating a PO the GR is not checked so there will be no delivery .
Also this setting is for invoices which are comming from Vendors.But if we are genrating the invoices manually it is not blocking those invoices.Also i there is nowhere mentioned in Incomming invoice to set tolerence for incomming invoice.Are you talking about Vendor tolerences?
Thanks in advance
Edited by: Metroid01 on May 14, 2009 6:52 PM

Item substitute and on hand quantity control

Similar Messages

Maybe you are looking for