ITouch has a black screen as if it's off but when plugged into the computer it says it's on. I have to wait until the battery dies to charge it and turn it back on.
I've tried restarting it. When the battery finally dies and I get to turn it back on, it works for a while until it freezes, then I click the power button to put it on standby and then the screen won't turn back on but the computer says it's still on. However, the computer won't detect the device.
When this happens hold the HOME and SLEEP button at the same time for about 10 seconds until an Apple logo appears. If that works we still need to find out why it is locking up.
Similar Messages
-
My charging adapter is fine but when I plug it into the charging port on the macbook it only works if I press down on it and it buzzes slightly. What is wrong and how much will it cost to fix?
Check the charger connection to the MBP. The pins are spring loaded and should be able to move freely. Look into the charge port of the MBP and make certian that there is no dirt or debris inside.
There should be NO noise when connected to the charger. If so, bring the MBP and the charger for a FREE evaluation at an Apple store genius bar.
Ciao. -
my ipod nano4th gen will not download the purchased songs in itunes v11. Just upgraded to mac 10.6.8-won't synch new songs since this upgrade. The ipod is seen in the itunes as the devise, and the nano screens says synching when plugged into the macmini usb port, but the itunes window does not say it is synching like it has before so whats the culprit? Techno virgin in distress!
PS - I added an iphone5 which is whay these upgrades happened so this synching to the ipod error is since the iphone began synching.I just learn in some post that the most common lapses in syncing is not checking if "sync music" in music section of the ipod is ticked. So double check if it is. Cheers!
-
my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?
There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.
-
My iPad was disconnected during upgrade. I've tried restoring and resetting. I just did an iPad erase in "find my iphone" and it still shows the itunes logo and the fire-wire cable on the screen with an arrow. It's currently plugged into my computer. How do I remedy this?
Unable to update or restore
http://support.apple.com/kb/HT1808?viewlocale=en_US -
please help! my iphone randomly went unresponsive, when plugged into itunes it flashes apple logo and itunes doesnt recognise it and when plugged into the mains its in recovery mode, asks to be connected to itunes, but immediately turns off when unplugged from mains
You could try to do a hard reset, sometimes resetting the phone helps. Hold down the sleep/wake button on the top and the home button until you see the apple logo, this make take a minute or two but this might help.
-
I can't turn on my MacBook Air despite trying to hold down the power button and using the SMC method. BTW my battery charger lights up to a green when plugged into the laptop.
Hello cass528,
I would be concerned too if my MacBook Air would not power on. I recommend following the steps in this article when experiencing an issue like this:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I get black screen on my new macbook air but I can see the mouse pointer. usually need to restart the computer so everything works as it should
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
If that does not help, reinstall OS X -
I am using IDVD to create slide shows. When viewed on my computer, the pictures are clear and of high quality. When I burn the slide show to a disk and play it back, the pictures are blury and of poor quality. Is there a setting that controls the quality of the burn and if there is, where do I find it? Thank you.
The Mac software - iPhoto, iMovie, and iDVD are not the best with the Ken Burns effect (zoom in/out effect), so you might want to minimize that effect; also, if your subjects are wearing stripes for instance, that will have an effect if you zoom. There is better software available for slideshows; however, I do not know of any that is free (and does a good job). I've used Photo to Movie for some time; it does a fine job even in HD, but you have to pay for it. I use iDVD extensively, but only to add a menu, theme, special effects, etc. and then to burn it.
-
MY iPhone 5C suddenly stopped working. It wont connect to my Mac and repeatedly reboots from the apple Logo when plugged into the wall.
There is no water damage or anything. I got that checked at the Apple store. I also have Apple Care + but didnt let them give me a new one yet because I have photos on this that I have no yet backed up that are very important. They are the last photos I have with my grandfather. Can anyone help me. Please!If the phone shows the "connect to iTunes" screen, the data on the phone is most likely lost.
Connecting in recovery mode is your only chance to use the phone again, besides getting it serviced by Apple.
iOS: Unable to update or restore -
I work on dual screens on a new mac pro but when I do the 4 finger swipe it moves both screens, is there a way to move just the screen that is active?
Multiple desktops and dual screens really aren't meant to work together. Apple came up with this multiple desltops feature and never really thought about users that use a dual monitor setup. So use either multiple desktops OR dual monitors but not both. Also don't try to use any App in Full Screen Mode as that doesn't work with dual screen setups either.
-
My IPhone works with both the charging USB cable as well as the wall socket and docking station. Additionally, my IPod used to charge using both the wall socket plug in and the docking station. My IPod will stay play music when plugged into the docking station, but won't charge. Further, when I plug my IPod into my computer all it will do is charge and is not recognized by ITunes. I have done both a soft and hard reset.
If the iPhone has no problem with the same cable then
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My iPad wont charge when plugged into a computer, the battery isn't lasting long, and its getting hot when charging
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.
Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.
-
my ipod shuffle is showing up when plugged into my computer. Also, isn't the orange light suppose to stay on until charged. Mine lights orange for a minute and then goes off and also it wont be recongnize by my computer .please help
I'm having the same problem. I'm using a new shuffle usb cable in my 2nd generation shuffle and nothing shows up on computer. I'm wondering if the dock for the second gen is different than the new usb cable direct into the 2nd gen shuffle. I don't have a dock for it. Before I buy one on ebay I hope someone can assist.
Maybe you are looking for
-
Template for a conference room bookings
Hi - we are planning a conference and we need to keep track of room bookings and costs. is there such a template we could use?
-
Profit center wise report using MB51
Dear experts, I want to copy standard report of MB51 which is RM07DOCS. In this report I want profit center field also . Profit field exists in table MSEG. where I have to attach this field in the report RMO7DOCS. This report is heirarchical report.
-
My iTunes displays an error message after trying to sync iPhone
I tried to sync my iPhone today so it would back up. In the middle of the sync it told me that "The iPhone "iPhone" cannot be synced. An internal device error occurred." Also while it attempts to do it, the bar indicating how much memory I have left,
-
Hi I need to get some room on my Macbook and want to move my photos to an external hard drive. I have iPhoto '08 7.1.5. a step by step explanation would be great. How and where to create the new library, how I actually move my existing photos there,
-
How to Set Uniform Address Book Contacts
you know what i would love to do? make all the numbers in addressbook.app uniform formatting, like every number +15551212, instead of all mixed; some (555)1212; some 15551212, etc. i can't write scripts, so is there a way i can do this?