ITSMobile Table Control(Element)
Hi Experts,
Is it possible to Table Control (Element) for ITSmobile applications?
Thanks in advance.
Hi,
Thanks for your reply.
Yes. I need that control. Please let me know how to use it?
Regards
Similar Messages
-
What is wrong with PBO (table control)
Hi,
Another beginner's question. Unable to fill table control.
Following in my Program
report test_tab_con.
controls flights type tableview using screen 100.
data: ok_code type sy-ucomm,
save_ok type sy-ucomm.
data: fill type i,
begin of itab_con occurs 0,
id type i,
name(10) type c,
address(20) type c,
end of itab_con.
data: wa_itab like line of itab_con.
perform populate.
form populate.
itab_con-id = 1.
itab_con-name = 'ABCD'.
itab_con-address = 'Test Area'.
append itab_con.
itab_con-id = 2.
itab_con-name = 'XYZ'.
itab_con-address = 'Come again'.
append itab_con.
call screen 100.
endform.
module fill_table_control output.
move-corresponding wa_itab to flights.
endmodule.
module status_0100 output.
set pf-status 'SCREEN_100'.
describe table itab_con lines fill.
flights-lines = fill.
endmodule.
and my screen PBO is:
process before output.
loop at itab_con into wa_itab with control flights.
module fill_table_control.
endloop.
module status_0100.
But finally I see empty table control. There is some option of w/ selColumn (i m not using this - is it mandatory for display?).
Regards,
ArpitStill no luck. I am sure it is not being refresh onto the final screen. Just don't know how to get it done
Steps taken to create the UI using screen painter:
- Create screen
- Drag & drop the Table control element
- Press F6 to open dictionary/program fields view, selected itab_con and its fields. Dragged them on to the table control to create it.
- For all the three fields ID, Name, Address - double clicked on the table control and in screen painter attribute marked them as Input Field (possible). Tried it also by marking as Output field.
Do I need to do anything part of the screen painting?
I get three rows in the UI but the text is not visible. What else can be a miss here?
Regards,
Arpit -
How to change the screen element of a single field in a table control
Hi Gurus,
I want to change the screen element of a single field (or the whole row) in a table control according to a condition.
I have 2 columns in the table control. One is an input column and one output only. When user enters values into the input column, they need to be compared against the values in the other column, and if there is a discrepancy, the row where the discrepancy is needs to be highlighted.
I have tried the following code which highlights the whole column ...
CONTROLS: TC_ZVOYG_BINS TYPE TABLEVIEW USING SCREEN 0500.
DATA: wa_tc_zvoyg_col LIKE LINE OF TC_ZVOYG_BINS-cols.
LOOP AT G_TC_ZVOYG_BINS_ITAB
INTO G_TC_ZVOYG_BINS_WA.
if G_TC_ZVOYG_BINS_WA-zdelivery_bin ne G_TC_ZVOYG_BINS_WA-zactual_bin.
loop at screen.
IF screen-name = 'ZVOYG_BINS-ZACTUAL_BIN'.
wa_tc_zvoyg_col-screen-intensified = 1.
MODIFY tc_zvoyg_bins-cols FROM wa_tc_zvoyg_col TRANSPORTING
screen-intensified WHERE screen-name = screen-name.
endif.
endloop.
endif.
endloop.
And also the following code which makes no change ...
LOOP AT G_TC_ZVOYG_BINS_ITAB
INTO G_TC_ZVOYG_BINS_WA.
if G_TC_ZVOYG_BINS_WA-zdelivery_bin ne G_TC_ZVOYG_BINS_WA-zactual_bin.
loop at screen.
IF screen-name = 'ZVOYG_BINS-ZACTUAL_BIN'.
screen-intensified = '1'.
modify screen.
endif.
endloop.
endif.
endloop.
Thanks in advance.Hi,
The modification of a screen element attribute (LOOP AT SCREEN...MODIFY SCREEN) must always be done in the PBO (for a dynpro, it will be in a PBO module, i.e. declared by MODULE ... OUTPUT)
About the loop at the internal table, it is done automatically by the system, also during the PBO, you'll find something like LOOP [AT itab] ... WITH CONTROL ... in the PBO part of the screen flow logic (note: you may have to complete with a supplementary READ TABLE if you don't use AT itab). So you don't need an additional loop.
Best regards
Sandra -
Description of field from data element in table control
hello people !!! I need help !!
Im using a table control in my module pool program. I create this table through wizard, taking the fields from an internal table. This internal table was defined like this:
Table Control ; posting items
DATA: t_postitems TYPE stucture_fd OCCURS 0 WITH HEADER LINE.
Where <b>stucture_fd</b> is strucuture with the fields.
The problem that I have is that the titles of the fields does not take their description from the data element.
How I create this table control from the internal table and that takes the description from the data element? It is very important this, because this development will be used in different languages.
From already I am thanking for any answer.
Thank so much.
Best regards, Esther.Gracias, es mas facil para mi en espanol.
tables: tab_prb.
types: begin of <b>ti</b>.
include structure <b>tab_prb</b>.
types: end of <b>ti</b>.
data: <b>ti_b</b>kpf type table of ti,
<b>wa_bkpf</b> type ti.
Explicacion:
tab_prb, es una tabla transparent que contiene la estructura <b>struct_fd</b> que tiene los campos mas un flag para la seleccion de fila (flag).
Defini esta tabla transparente, para que los campos tomen su decripcion desde los elementos de datos.
Si creo el TB directo de la tabla tab_prb, no me permite seleccionar el campo flag como campo de seleccion, cuya funcion es marcar linea simple.
Si yo hago la definicion anterior en mi programa, cuando creo el TB, va todo bien, hasta <b>ti_bkpf</b> que seria mi tabla interna, pero cuando me pide el work area, le ingreso <b>wa_bkpf</b> me indica que no esta definido en mi programa o ne es una estrucutura.
Espero haber aclarado un poco mi respuesta.
Muchas gracias !!!
Esther.- -
CSKA & CSKB Tables -Cost Element+ Controlling Area, Cost Element Category
I have few questions on Chart Of Accounts and Controlling Areas and CSKA(Cost elements (data dependent on chart of accounts)) and CSKB (Cost elements (data dependent on controlling area)) Tables--
1) One Chart Of Accounts has one or more Controlling Areas. Is there any situation where One Controlling Area contains many Chart Of Accounts.
2) CSKA Table contains all the Cost Elements under the Chart Of Accounts. So does all these Cost Elements appear under CSKB Table. Are there any Cost Elements which doesn't fall under any of the Controlling Area and only exists under Chart Of Accounts Level in CSKA Table.
3) In CSKB Table How do we know the corresponding Chart Of Accounts for the Cost Element.
4) In CSKB Table Cost Element Category depends on both Cost Element and Controlling Area. So does a Cost Element can be Primary Cost Element for one Controlling Area which happens to be GL Account and Secondary Cost Element for some controlling Areas.
5) Are there any Company Codes under the Chart Of Accounts which doesn't belong to any of the Controlling Area and doesn't have any Cost Elements.Hi,
1) One Chart Of Accounts has one or more Controlling Areas. Is there any situation where One Controlling Area contains many Chart Of Accounts. Never
One controlling area can be assigned to many company codes, but all must have been assigned to the same chart of accounts only. This is the pre requisite for the so called cross company controlling
2) CSKA Table contains all the Cost Elements under the Chart Of Accounts. So does all these Cost Elements appear under CSKB Table. Are there any Cost Elements which doesn't fall under any of the Controlling Area and only exists under Chart Of Accounts Level in CSKA Table.
If some data exists in CSKA table, it mean that, it must have been created as a CE in any of the controlling area
3) In CSKB Table How do we know the corresponding Chart Of Accounts for the Cost Element.
In CSKB, you wont get the correspondant COA for the given controlling area. If you want to know it pass field value CSKB-KOKRS to table field TKA01-KTOPL to get the assigned COA
4) In CSKB Table Cost Element Category depends on both Cost Element and Controlling Area. So does a Cost Element can be Primary Cost Element for one Controlling Area which happens to be GL Account and Secondary Cost Element for some controlling Areas.
You cannot create a secondary cost elemant using a key matching with an GL code in cross company controlling. In case of both company codes assigned to different controlling areas this can be possible
5) Are there any Company Codes under the Chart Of Accounts which doesn't belong to any of the Controlling Area and doesn't have any Cost Elements.
Only In case of CO module is not active for the a company code
Note: If you have more queries, post it separately rather than asking all in one thread. and be specific with your requirement with the actual scenario.
Thanks,
Srinu -
Is it possible to assign user-defined data elements to table control?
Hi SDN,
Is it possible to assign a user defined data element other than basic data types in table control column.Hi Suresh,
In Screen layout,In element list tab,i am not able to give the user-defined data types other than basic data types?please tell me how to give other data types -
Problem while saveing in Table Control.
Hi
I am geting error while saving data in table control.
This table contol is pop up window at end of screen .
user enter qty & uom in TC..
Error i am getting is...
Field symbol has not been assigned.
Error analysis
The system tried to access an anasigned field symbol (data segment
number 32772).
The field symbol is no longer assigned, because a Unicode program
previously tried to set the field symbol using an ASSIGN statement with
an offset/length declaration. The memory addressed in this offset/length
declaration, however, no longer lay within the valid range.
Information on where terminated
The termination occurred in the ABAP program "SAPLOMCV" in
"CONVERSION_EXIT_MATN1_INPUT".
i Have coded like this..
MODULE USER_COMMAND_0112 INPUT.
CASE OKCODE.
WHEN 'BACK' or 'CANCEL'.
SET SCREEN 0.
This iti is contain data which diplay in TC
when 'DISPLAY'.
LOOP AT ITI.
read table iti with key ingr_code = iti-ingr_code
ingr_desc = iti-ingr_desc.
wka1-ingr_code = iti-ingr_code.
wka1-ingr_desc = iti-ingr_desc.
wka1-conc = iti-conc.
wka1-quantity = iti-quantity.
wka1-uom = iti-uom.
append wka1 to itf.
ENDLOOP.
WHEN 'SAV'.
loop at itf where check = 'x' .
update zacg_ns
set ingr_code = itf-ingr_code
col_name = itf-ingr_desc
conc = itf-conc
quantity = itf-quantity
UOM = itf-UOM
ru = itf-ru
where ingr_code = itf-ingr_code
and col_name = itf-ingr_desc.
zacg_ns-ingr_code = itf-ingr_code.
zacg_ns-col_name = itf-ingr_desc.
zacg_ns-conc = itf-conc.
zacg_ns-quantity = itf-quantity.
zacg_ns-UOM = itf-UOM.
update zacg_ns.
endloop.
leave program.
ENDCASE.
ENDMODULE. " USER_COMMAND_0112 INPUT
MODULE read_table_control INPUT
MODULE read_table_control INPUT.
MODIFY itf INDEX tc-current_line.
ENDMODULE. "read_table_control INPUT
*& Include ZACG_NS_2 *
*& Module STATUS_0111 OUTPUT
text
MODULE STATUS_0111 OUTPUT.
SET PF-STATUS 'ZNEWSHADE'.
SET TITLEBAR 'ZNS'.
ENDMODULE. " STATUS_0111 OUTPUT
*& Module STATUS_0112 OUTPUT
text
MODULE STATUS_0112 OUTPUT.
SET PF-STATUS 'ZTC'.
SET TITLEBAR 'xxx'.
DESCRIBE TABLE itf LINES lines.
tc-lines = lines.
ENDMODULE. " STATUS_0112 OUTPUt
PROCESS BEFORE OUTPUT.
MODULE STATUS_0112.
LOOP at itf WITH CONTROL TC CURSOR tc-current_line.
MODULE TC_PBO .
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP at itf .
module read_table_control.
ENDLOOP.
MODULE USER_COMMAND_0112.
Can any one help me..Hi,
Did you enter that filed later after creating the table control?
You check in the element list whether for that element u have an entry or not..
Regards,
Nishant -
Select all and deselect all in table control
Hi experts,
I want to make the select all and deselect all options in my table control.
But i can't able to do that one. Kindly suggest me how to do that one.
one more thing, if i select some rows in the table control, and press save it should be saved in some other table. how can i implement that one.
Waiting for ur reply.
Regards...
Arun.Hi Arun,
In the context node that you bind to the table, set the cardinality as 0..n and selection as 0..n. In the UI element Table, set the property selectionMode as 'multi'. Then a toggle button for select/deselect all will appear automatically in your table. You can see it in the top left corner.
For your second question, after selecting the elemets and pressing 'save', in your event handler, do a get_selected_elements( ) on your node. This will return you a set of context elements. Loop through each element and do a get_static_attributes to get the rows. Then you can append these rows to another internal table and bind it to the context. Bind your second table to this node. If the two tables are in different views, the context nodes need to be present in the component controller and mapped to the views.
Hope this helps.
Regards
Nithya -
To Disble the Field in Table Control after clicking Save button
Hi,
I have a requirement as follows. i need to disable one field in the table control after clicking save button. i tried with SCREEN elements but it disabling whole the table control but i need to disable that particular one record only in the table control. i found Structure CXTAB_COLUMN in documentaion. it has the properties like invisible. can any body tell how can we disble that particular field in table control only for the one record. and how can we use CXTAB_COLUMN.
Thanks in advance.hi,
do like this...
in USER_COMMAND_1000 module of PAI,
MODULE user_command_1000 INPUT.
CASE ok_code.
WHEN 'BACK' OR 'UP' OR 'CANC'.
LEAVE PROGRAM.
WHEN 'SAVE'.
fl = 1.
GET CURSOR LINE lin.
ENDCASE.
ENDMODULE. " user_command_1000 INPUT
and make on module disable in Loop Endloop in PBO.
and write like this...
MODULE disable OUTPUT.
LOOP AT SCREEN.
IF tab1-current_line = lin AND fl = 1.
screen-input = 0.
ELSEIF tab1-current_line < lin.
screen-input = 0.
ELSE.
screen-input = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDMODULE. " disable OUTPUT
here fl and lin both are type i.....
and there will b one module in PBO
MODULE tab1_change_tc_attr.
in that put if condition....
MODULE tab1_change_tc_attr OUTPUT.
IF sy-ucomm <> '' AND sy-ucomm <> 'SAVE'.
DESCRIBE TABLE itab LINES tab1-lines.
ENDIF.
ENDMODULE. "TAB1_CHANGE_TC_ATTR OUTPUT
ur problem will solve...
reward if usefull....
Edited by: Dhwani shah on Jan 2, 2008 1:17 PM -
How to implement line selectability for a table control using table Wizard?
Hello SDN Community,
I have created a table control using the Table Wizard. I found my exact question in this forum, but unfortunately it had not been andsered. While I cannot paste a screen-print into this plane-text area, here are the steps I followed...
1) SE51
2) Create new screen 0100
3) Click Layout button
4) Clidk Table Control (with Wizard) and draw box on canvas.
5) Step is "Start" - click Continue
6) Step is "Name of Table Control" - provided name
7) Step is "Table Name" - provided name of dictionary table (AUFK)
8) Step is "Definition of Columns" - selected order numver and order text
9) Step is "Table Control Attributes" - Line Selectability is in display mode - cannot set it.
I would like to have a selectability column for my table. Would appreciate any insight into how to do this.
Thank you,
Dean Atteberry.This is a puzzling...
For the table control wizard, in the Table Control Attributes step, I was able to get line selectability to open up by declaring a char01 data element at the beginning of my type.
The puzzling is in regards to the "Selection col. fld" entry field.
If I leave it blank and try to go to the next step, I get message "Enter the name of the selection column if you are using a program table"
So it looked like it wanted to know the name of my selection column. So I type in "CHAR1". and got the message "The field "CHAR1" for the selection column is already contained in the table."
Hmmmmm.... don't understand............
Dean Atteberry. -
Is it possible to create Table Controls(in Dynpro) dynamically
HI All
I am not sure if we can create screen elements dynamically especially Table Controls. I need to create a Table control in a custom screen but the fields/columns in the table control are known at run time. Is it possible?? Appreciate any light on this subject.
Thanks
Vanhi
ccheck for the link
Check following link for the same.
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FforumID%3D52%26threadID%3D45079%26messageID%3D459011%23459011
also take a look at the FM
take a look at FM:
FREE_SELECTIONS_INIT
FREE_SELECTIONS_DIALOG
hope will be helpfull to you.
regards
vijay
<u><b>plz reward pts if helpful</b></u> -
Drop down list in Table Control - Value disappeared after pressing ENTER
Dear Gurus,
I have a problem in one of my development where I used a table control in which one field is a drop down list.
I used VRM_SET_VALUES and VRM_GET_VALUES for populating the values from the programand not use any domain level value table for that field.
My problem is when I select one value from this list , and pressing enter , the value get disappeared. But if I use a domain for this field with value table then everything working properly.
My doubt is am I doing some miss coding or using the VRM_ function modules improperly ?
I am sharing some code with you
in PAI :
CALL FUNCTION 'VRM_GET_VALUES'
EXPORTING
id = 'ITAB-FIELD3' "This is drop down list element on screen
IMPORTING
values = values[] " even it is not the expor parameter...it will work..
EXCEPTIONS
id_not_found = 1
OTHERS = 2.
IF sy-subrc NE 0.
No sy-subrc check required.
ENDIF.
IN PBO
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'IVBAP-ERNAM'
values = values[].
Can you please help me.
Thanks .HI,
The link contains the list box creation, just check if this might help.
Re: Getting values back from a listbox.
Regards and Best wishes. -
Error while trying to change the Column description in Table Control
Hi,
I have created a table control using the wizard in Module Pool.
When i try to change the column description of the table control or adjust any other element which is already available on the screen and not in table control. It gives me an error
Unable to transfer data. End Program?
Any help would be appreciated.
Thanks
Sarves S V KHi.,
Check these [Table Control Change Column Description|Add new columns in table control in custom screen program;
and [Add Columns in Table Control|Re: Table control columns]
else delete and create Table control Again..!!
hope this helps u.,
Thanks & Regards,
Kiran -
hi,
I am having a issue with table control scrolling. When i was passing less number of records (say 19 records becuase table control is having 19 lines) to table control in BDC call transaction, everything is working fine. after filling the 19 line items its not taking the next line item the page is not scrolling down. T.code is <b>GS02</b>. please suggest me. following is my code
REPORT ZLOCK_WBS_ELEMENTS MESSAGE-ID ZFI_RESTMT.
TYPES *
*types declaration for final internal table
types: begin of ty_final,
ryear like zupi5a-ryear, "Fiscal year
rbukrs like zupi5a-rbukrs, "Company code
racct like zupi5a-racct, "Account number
rzzps_posid like zupi5a-rzzps_posid, "WBS element
rzzmtit like zupi5a-rzzmtit, "MPM title
rzzmfor like zupi5a-rzzmfor, "MPM format
rzzmatnr like zupi5a-rzzmatnr, "Material number
rzzcou like zupi5a-rzzcou, "Country
rzzfow like zupi5a-rzzfow, "Financial owner
rzzoow like zupi5a-rzzoow, "Operational owner
rzzcon like zupi5a-rzzcon, "Licensee Contract
rzzloc like zupi5a-rzzloc, "Licensor Contract
kostl like zupi5a-kostl, "Cost center
zzfam like zupi5a-zzfam, "Fame Number
zzfor like zupi5a-zzfor, "Format
zzprd like zupi5a-zzprd, "Product Line
zzwin like zupi5a-zzwin, "Window group
zzwig like zupi5a-zzwig, "Window
rtcur like zupi5a-rtcur, "Currency Key
tsl like zupi5a-tsl, "Amount Transaction currency
hsl like zupi5a-hsl, "Amount Co. code currency
ksl like zupi5a-ksl, "Amount Group currency
msl like zupi5a-msl, "Quantity
end of ty_final.
Data
data: j_final2 type standard table of ty_final,
v_final2 type standard table of ty_final.
data: wa_final2 type ty_final.
data: bdcdata like bdcdata occurs 0 with header line,
messtab like bdcmsgcoll occurs 0 with header line.
data :begin of i_values occurs 0.
include structure setvalues.
data :end of i_values.
data: v_counter(3) type n value '0',
v_from like rgsbl-from,
V_FROM(30) TYPE C,
v_setname like zfi_setid_cc-setid,
v_setid like sethier-setid,
n type i,
l type i,
k type i value '1',
p_rbukrs like zupi5a-rbukrs.
import p_rbukrs from memory id 'bukrsid'.
import i_final2 to j_final2 from memory id 'table'.
To eliminate duplicate WBS elements to be stored into the sets
v_final2 = j_final2.
sort v_final2 by rzzps_posid.
delete adjacent duplicates from v_final2 comparing rzzps_posid.
select single setid into v_setname
from zfi_setid_cc
where rbukrs EQ p_rbukrs.
IF sy-subrc <> 0.
MESSAGE E005.
ENDIF.
*write 'ZFIRESTATEMENT' to v_setname.
call function 'G_SET_GET_ID_FROM_NAME'
EXPORTING
shortname = v_setname
IMPORTING
new_setid = v_setid.
call function 'G_SET_TREE_IMPORT'
EXPORTING
client = sy-mandt
langu = sy-langu
setid = v_setid
TABLES
set_values = i_values.
describe table i_values lines n.
describe table v_final2 lines l.
write n to v_counter.
clear bdcdata.
refresh bdcdata.
perform bdc_dynpro using 'SAPMGSBM' '0105'.
perform bdc_field using 'BDC_CURSOR'
'RGSBM-SHORTNAME'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
*perform bdc_field using 'RGSBM-SHORTNAME'
'ZFIRESTATEMENT'.
perform bdc_field using 'RGSBM-SHORTNAME'
v_setname.
loop at v_final2 into wa_final2.
v_counter = v_counter + 1.
perform bdc_dynpro using 'SAPMGSBM' '0115'.
concatenate 'RGSBL-FROM(' v_counter ')' into v_from.
perform bdc_field using 'BDC_CURSOR'
v_from.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RGSBS-TITLE'
'FI Restatement-WBS locking'.
perform bdc_field using v_from
wa_final2-rzzps_posid.
endloop.
perform bdc_dynpro using 'SAPMGSBM' '0115'.
perform bdc_field using 'BDC_CURSOR'
v_from.
perform bdc_field using 'BDC_OKCODE'
'=SAVE'.
perform bdc_field using 'RGSBS-TITLE'
'FI Restatement-WBS locking'.
perform bdc_dynpro using 'SAPMGSBM' '0105'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'RGSBM-SHORTNAME'.
call transaction 'GS02'
using bdcdata
mode 'A'
update 'S'
messages into messtab.
Start new screen *
form bdc_dynpro using program dynpro.
clear bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
append bdcdata.
endform.
Insert field *
form bdc_field using fnam fval.
if fval <> ' '.
clear bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
append bdcdata.
endif.
endform.
this is working fine when they r less than 19 line items. please suggest me with the logic when it is more than 19 line items.Hi,
Just try to increase the table control lines before display.
v_counter = n + 10. -
Problem in SCROLLING of TABLE CONTROL which is designed using WIZARD
Hello Friends ,
I have designed a entry screen by using table control with wizard. My table control layout has 11 rows. I have used all 3 facilities i.e. SCROLLING , INSERT/DELETE & SELECT/DESELECT by cheking ( ticking ) check boxes while designing table control with wizard.
Now i have 3 problems.
1> In my entry screen , if 11 entries are entered , they are displayed in entry screen and are saved correctly in DB.
But when i copy a file of suppose 15 entries into entry screen then it displays only 11 entries in entry screen and after that if i click/move VERTICAL SCROLL BAR to see remaining/next 4 entries then it does not display 12th 13th 14th &15th entry in entry screen. So the problem is i am unable to display remaining/next 4 entries in entry screen & also to save them DB.
2> At the same time when i click/move VERTICAL SCROLL BAR to see remaining/next 4 entries then earlier 11 entries are disappeared/ get cleared from entry screen.
3> The FIRST PAGE, PREVIOUS PAGE , NEXT PAGE , LAST PAGE and INSERT , DELETE push buttons are dispalyed in my entry screen . But they are not working or doing their opertions on table control though there is system generated code for them written in module pool program and PBO & PAI OF SCREEN 100 on which table control is present.
So eagerly waiting for POSITIVE replies & Correct solutions from all ABAP techies.
THANKS & REGARDS,
Ashish.Hi friend,
I have visited the link u have given . But it is a report program .it is available in ABAPDOCU tcode.
ABAPDOCU----
>ABAP User Dialogs -
>Screens -
>Complex Screen Elements -
>Table Control with Scrolling .
It is a REPORT program. and not a module pool program. plz check this in ur link also.
REPORT demo_dynpro_tabcont_loop. &
*SELECT * FROM spfli INTO CORRESPONDING FIELDS OF TABLE itab.* -
> this statement is used only in report program and system does not allow us to use in module pool program.
Second thing here data is retrived from spfli table where as my data will be whatever enduser enters it may be 15 lines , may be 50 lines or may be 200 lines and it shold be displayed on entry screen before clicking SAVE or any other user action.
My main problem is that I am unable to enter more than 11 entries in my entry screen. I want dynaamic table. Mean whichever enteries are entered they should be displayed on entry screen as well as can be scrolled up & down before saving and get saved after clicking SAVE button. here table control design is not imp because entry data depends on table control layout rows & which has limit. It can not be extended beyond certain level. i think max will be 20 Or 25 rows in layout. How to make it dynamic so that we can get any no. of entries in entry screen hiich canbe scrolled up & down.
Anyways thanks for ur reply And send some other soln.
Thanks & regards,
Ashish
Maybe you are looking for
-
Internet Explorer 11 slow response on Windows 7 x64 virtual machine
I have a number of virtual machines running Windows 7 64bit on my network. They are set up on a server running VMWare ESXi 5.1.0. Their users access them from Windows 7 desktops via Remote Desktop. The overall performance of the Virtual Machines is f
-
View tracks instead of selecting albu
When I go to media library, artists, then to a selected artist is there some way i can just get the tracks to show up instead of having to pick an album?this by the way is for a microphoto 8gbMessage Edited by Karma8 on 03-29-20062:36 PM
-
When load for Hr Payroll is triggered it fails. Error occured in the data selection. Error message "Personnel no. 00008110 , payroll result 00161 : Incomplete administrative data" Checked at source side all the details of the above personnel number.
-
Encode Special Characters to HTML String
I was wondering that there is no function similar "encodeURL" available to encode strings like "�u" to "äü" . Did I missed something? Regards!
-
New user called user.domain after updating from win 8.1 to win 10
I can't find any information on it at the moment but my guess would be that the profile versions have increased between 8.1 and 10 as they did between 7 and 8.1 I think I remember seeing somewhere that the profiles in Windows 10 are now v5 instead of