Itunes just asked me to do another update yesterday. But it's still not working. when ever i try to sync music to my ipod touch it keeps saying itunes is not responding and it freezes. Itunes please fix this problem!!!!!:-(
Itunes still is not working correctly. There was a software update that i received yesterday and i figured it would fix the problem with itunes not responding, but it didn't. It's still doing the same thing. I'm getting kinda annoyed cause i use itunes as my main music player so please help me fix this software issue thanks!
Hi Batman1981,
It sounds like you may be describing an issue where a program that monitors the Winsock protocol for Windows is conflicting with iTunes and it's related components. Take a look at the article linked below, it provides suggestions that may resolve the issue.
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/ts4123
You may notice the following symptoms on your Windows PC after installing the iCloud Control Panel, iTunes 10.5 or later, or Safari 5.1 or later:
iTunes is slow to respond.
Windows is slow to respond.
iTunes stops responding when backing up or syncing with an iPhone, iPad, or iPod touch.
-Jason
Similar Messages
-
Me compre un ipod classic de 160gb cada vez que trato de ponerle musica de mi disco duro externo solo copia hasta 1500 canciones y luego me congela el Itune y no lo puedo cerrar, me pide que restaure el ipod como de fabrica, lo hago y nada. Trato de cerrar el programa de itune y no me deja, trato de apagar el computador y no lo puedo apagar, he buscado para ver si tiene errores el disco del Ipod y me dice que esta bien. Lo he restaurado como 8 veces y le he puesto musica y videos pero siempre me borra todo. He aplastado Menu y Seleccion para entrar al sistemade diagnostic o del ipod y le pongo el test manual donde entro al IO y me dice q todo esta bien. Le he dado ya varios Format directamente desde el Windows 7 y nada tampoco, siempre me borra todo desde que pasan mas de 1300 canciones y me congeal todo el equipo. Ya no se que pensar de esta compania Apple porque no da ninguna solucion ha este tema.
I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune will not let me, I try to turn off the computer and I can not shut, I looked to see if the iPod disk errors and says it's okay. I restored it about 8 times and I've put music and videos but I always delete everything. I crushed and Selection Menu to enter diagnostic sistemade or ipod and I put the manual test where I enter the IO and q tells me everything is fine. I have already given several Format directly from the Windows 7 and anything either, I always delete everything from passing over 1300 songs and I congeal whole team. No longer have to think of this company because Apple gives no solution has this issue.06-sep-2012 0:14
Me compre un ipod classic de 160gb cada vez que trato de ponerle musica de mi disco duro externo solo copia hasta 1500 canciones y luego me congela el Itune y no lo puedo cerrar, me pide que restaure el ipod como de fabrica, lo hago y nada. Trato de cerrar el programa de itune y no me deja, trato de apagar el computador y no lo puedo apagar, he buscado para ver si tiene errores el disco del Ipod y me dice que esta bien. Lo he restaurado como 8 veces y le he puesto musica y videos pero siempre me borra todo. He aplastado Menu y Seleccion para entrar al sistemade diagnostic o del ipod y le pongo el test manual donde entro al IO y me dice q todo esta bien. Le he dado ya varios Format directamente desde el Windows 7 y nada tampoco, siempre me borra todo desde que pasan mas de 1300 canciones y me congeal todo el equipo. Ya no se que pensar de esta compania Apple porque no da ninguna solucion ha este tema.
I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune will not let me, I try to turn off the computer and I can not shut, I looked to see if the iPod disk errors and says it's okay. I restored it about 8 times and I've put music and videos but I always delete everything. I crushed and Selection Menu to enter diagnostic sistemade or ipod and I put the manual test where I enter the IO and q tells me everything is fine. I have already given several Format directly from the Windows 7 and anything either, I always delete everything from passing over 1300 songs and I congeal whole team. No longer have to think of this company because Apple gives no solution has this issue.
iPod classic, Windows 7, ME BORRA TODO Y SE CONGELA -
My iPod touch 4g keep saying my charger isn't supported even tho I have used this one for years and has never said it befor
- Does it charge when connect to your computer?
- Does it charge other devices?
- Does your iPod charge when connect to your computer?
- Try another cable
- See:
iPod touch: Hardware troubleshooting -
When I try to sync music into my iPod Touch 5 the iTunes responds saying that I have don't have enough free space to sync the music however there is enough space. Even when I try to unsync the songs from the iPod it won't get deleted the songs will stay in the iPod.
Hi there Alex0221,
You may find the troubleshooting steps in the article below helpful.
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
-Griff W. -
Mutt phone keeps saying no service because of a SIM card error? What does that mean and how do I fix it? It has done it twice I today's now and it very frustrating as I cannot make any calls.
Try reseating the SIM card or replacing it.
-
It was working the night before, but the next day wasn't working at all. Facetime was having problems too... I have Mac OSX 10.6.8.
Hi,
It might help if we knew what sort of Accounts/Screen Names were involved ?
What have you checked ?
Mac Firewall ?
Router ?
Logging on to your Mac with another Mac User ?
Does the Mac User Account you normally use have Parental Controls turned On ?
8:12 PM Thursday; August 18, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Version 8.0 self installed the other day. My computer immediately began having problems. I uninstalled 8.0 TODAY and it just reinstalled itself. I NEVER use any software version that ends with .0 - please fix this problem or I'll switch to another browser
'''I fixed mine by removing the Ask.com extension.'''
Tools
Add-ons
Settings icon
View Recent Updates
Ask.com '''DISABLE'''
Running FF 8.0 on Windows 7 (64-bit) -
Zoom option in accessibility enabled automatically and icon become so large. So not able to access (even call any no.) phone. Please fix this problem.
Update: I tried the "Toshiba Recovery Wizard" after everything else either fizzled out or hung up. After going all the way thru the recovery process (up to 100%), I finally got an error message.....it didn't work. And now, when I fire up the computer, I don't even get to that menu with the recovery options....the only thing I can boot into is the screens with the various ways to run your OS (in "safe mode", "safe mode with networking", etc).
I'm not a techie, but I'm guessing at this point, the part of my hard drive that got damaged in the fall was, at the very least, the partition with the recovery data. Couple that with the fact that this cheapo Toshiba laptop didn't even come with recovery disk (or ANY kind of disk, even basic installation software!), I'm screwed: I don't see any way to get a workable computer now without some kind of disk to boot from. So NOW my concern is more about spending the $$ for a new OS and THEN finding out the hard drive has other problems too...is broken in some other way to boot.
How to check this? As I said, I did run "chkdsk" back when I could get into the recovery menu and run the fix-it programs. It didn't note any problems. Thinking of taking this opportunity to upgrade to Windows 7 from Vista (which I never liked), but I have to know that the computer is otherwise ok....how to be sure? -
TS1368 CHARGED TWICE FOR SAME ITEM....PLEASE FIX THIS PROBLEM.
11/23/12 order MGK8JL6NJJ INVOICE 214042327611 CHARGED TWICE FOR SAME ITEM.. TRYED TO DOWNLOAD 3 TIMES 2 X GOT ERROR AND TOO TRY AT LATER TIME 3RD TIME WENT THROUGH RECIEVED ITEM. PLEASE FIX THIS PROBLEM. THANKS
These are user-to-user forums, you are not talking to Apple here. You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
For future info typing all in capitals is considered shouting, and may mean that people don't reply to your posts. -
Whenever I try to sync music to my ipod from itunes, it will go through all the steps up until it actually downloads the music, then it starts, and doesnt move. Why wont it download anything?
Try here:
iTunes: Error 13019 during sync
Not updating the iOS should not effect your problem.
As long as all the apps are in the iTunes library, you will not lose app data by updating the iOS. -
This is really frustrating. Every time i try to sync my 4th gen ipod touch itunes won't recognise it and the ipod keeps beeping - is there anything I can do? I've tried using different cables. Itunes works fine with my family members ipod's & iphones...
The best way to manage your music when you have multiple iPods is to change the settings under "Options" so that you manually manage your music instead of it doing an automatic synch each time you connect. To add only the songs you want, highlight them and then "click and drag" them to your iPod. This way none of your daughter's music gets added and you're not in danger of deleting your playlist as well. It will show you how many songs you've added and you can then click on your iPod to verify. To delete her songs off your iPod now, click on the music tab under your iPod so show everything you have stored. Find those songs you want to delete, click on them to highlight then go up to the Edit window and click delete. This will erase them off your iPod but be careful when you highlight. I did that and then had to reload a cd on my boyfriend's, lol. hope this helps
-
Hi i have an ipod 4th gen. the problem is when ever i try to sync my iPod to my computer a mesage comes up and says that the ipod can't be backed up. There wasn't a problem until I upgraded the software. How do I fix this??
Try here:
iOS: Troubleshooting backup issues in iTunes -
i cannot sync music with my ipod touch 4th gen.when i click on sync,nothing happens and the audio capacity bar on itunes disappears.i'm using microsoft windows 8 consumer preview
You can only sync with one computer. I would backup to one computer and then restore from backup.
iOS: Back up and restore your iOS device with iCloud or iTunes -
All my pictures taken at night using the flash are white and hazy, how do I fix this problem?
All my pictures taken at night using the flash are white and hazy, how do I fix this problem?
If you don't use the flash picture is too dark.
-
when ever i try to install photoshop cc on my laptop i keep getting this error "We've encountered the following issues installer failed to initialize. Please download adobe support advisor to detect the problem."
start at the top and work your way down applying applicable fixes until your problem is resolved.
if cc (win): https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
if, your error is:
"Installer failed to initialize. File not found." or "Installer failed to initialize. This could be due to missing files."
first, rename OOBE Folder to OOBE.old.
to find OOBE:
64 bit win OS: Program Files x86\Common Files\Adobe\OOBE
32 bit win OS: Program Files \Common Files\Adobe\OOBE
mac os: HD>library>application support>adobe>caps
mac os: USER>library>application support>adobe>OOB
if that fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
if you're using a dvd to install:
copy the disc contents to a desktop directory and install from that directory.
if you're using a mac:
1. Try to Create a new user account in Mac with Administrator Priviledges.
2. Login to the New user, Navigate to Mac HD> Application> Utilities> Adobe Installer folder, Locate products like Adobe Reader, Adobe Flash, Adobe Air and un-install them
3. Navigate to User Library> Application Support> Adobe and move Adobe to Trash.
4. Navigate to Mac HD> Library> Application Support> Adobe and move Adobe to Trash.
5. Start the installation again.
if everything applicable above fails, check your installation logs:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html
Maybe you are looking for
-
Report to check authorization object used in customized programs
Hi Guys, An auditor came and he raised a question to us, he asked whether all of our customized transactions and programs are maintained with authorization checks? The question is how can we check what authorization objects are used for our customize
-
Hi Everybody, i'm using solaris 7 with 64 bit kernel, and i'm trying to intercept some system calls, so i wrote a kernel module that replaces the sys_open call as a test, it compiles and loads ok and i can see it initializes using some cmn_err prints
-
What is the noise my iMac does while using boot camp?
Hello. I installed Windows 7 (Ultimate) on my iMac (27, late 2013, 32GB RAM) using Boot Camp and when I start using it, every couple of seconds I hear a noise that only happens with Windows. It's a very soft noise and it keeps repeating. I already se
-
LSMW: Material Master Data migration
I will be migrating material master data using LSMW IDOC. I also want to migrated associated material class data. The question is: How do I extract the material class data so that I can load them with LSMW IDOC CLFMAS after the materials are loaded?
-
Process Groups Attribute selection in SAMLIdentityAsserter
I have the server configured as relying party. The incoming SAML token has the group attribute generated. In SAMLIdentityAsserter I have the the 'Process Groups Attribute' selected. However, It doesn't seem to map the groups and roles to user. What d