ITunes says USB needs more power!
Lately I have been getting a message when connecting my iPod to my G4 tower - it says it is connected to a 1.1 low powered usb port. Actually it's connected to a usb 2.0 card port which I bought ages ago for the new iPod. The card has worked fine for over a year. It still syncs, just really slow.
So why does it think it's a 1.1 usb port all of a sudden?
So why does it think it's a 1.1 usb port all of a sudden?
It crapped out.
Can you try it in another slot?
Similar Messages
-
When I plug in a Lexar thumb drive, I get a "USB Low Power Notice' saying it cannot operate because it needs more power than is available. This is new. Thumb drives worked last week. Any suggestions? Is this an apple or a Lexar issue?
Apple intentional, use a powered USB hub instead.
-
my iPod touch was frozen for a several hours and whe i hooked it up to iTunes, it has the USb cable and iTunes logo. ITunes says i need to unlock my iPod, but i can't do that if it has the logos and stuff...what do i do?
See Here
http://support.apple.com/kb/HT1808 -
Iphone 5 backup and sync with iTunes ..says i need more memory
I just bought more icloud memory for my iphone 5...because it said i needed 1.4 gb of space to backup... It would not let me sync my iphone on itunes. I still can not back up..What should I do? I guess no reason to buy that 10 GB from itunes.
You probably need more free space on your phone, not in your iCloud account. (Additional iCloud storage doesn't increase the space on your phone.)
Check Settings>General>Usage to see how much available space you have. If you need more and your music is in your iTunes library, delete your music by going to Settings>General>Usage>Music, swipe across All Music, tap Delete. Then back up and sync with iTunes, and sync back the music you still want on your phone. -
My ipad is saying connect to itunes because it has been disabled. but my itunes says i need to unlock it before i cant do anything. i need help.
Hi Stephanie,
Welcome to Apple Support Communities.
It sounds like you're going to have to put the iPad in to recovery mode before you can restore it. The article linked below provides more details about the passcode lock and will walk you through putting the process of restoring from recovery mode.
iOS: Forgot passcode or device disabled
http://support.apple.com/kb/ht1212
Use recovery mode
Follow these steps if you never synced your device with iTunes, if you don't have Find My iPhone set up, or if you can't get to your own computer. You'll need to put your device in recovery mode, which will erase the device and its passcode. Then you'll restore your device as new or from a backup.
Disconnect all cables from your device.
Turn off your device.
Press and hold the Home button. While holding the Home button, connect your device to iTunes. If your device doesn't turn on automatically, turn it on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode.
Click OK, then restore the device.
Cheers!
-Jason -
Itunes says i need 4GB to sync my phone an add 1 album....
i want to add an album to my phone but itunes says i need 4GB more memory to sync, but obviously an 11 song album isnt 4GB of memory, any clues?
Hi shariwillis,
Welcome to the Support Communities!
The article below may be able to help you with this. It sounds like you may need to delete iTunes from the Applications folder and download a fresh copy.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
Apple - iTunes - Download iTunes Now
http://www.apple.com/itunes/download/
Happy New Year!
- Judy -
I can not back up my iPhone. It says I need more storage space. I purchased more space and icloud says it is there, but the phone is not recognizing this and continues to say that I need to purchase more space in order to back it up. Any ideas?
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I just bought iphone 5 and my itunes says I need itunes 10.7 But when I look for upgrades it says I have the current version of itunes. HELP!
I am so sorry I am frustrating you. This is the first time I have used this community and am leanring as I go. I am not able to see the entire post that you leave, unless I look at it on my phone (email)--I am so sorry. You have no idea how much i appreciate your help. Yes, I see that I can get the later version of OS software, but its not availabe for immediate download. My only options appear to be having it shipped, or going to the store to purchase. And if you know of another way that I can access all of my itunes library music on my new phone withouth using itunes, I would love to hear about it.--thanks and again i am so sorry for frustrating you.
-
I have my own icloud account separate from my family's apple ID for itunes. I need more storage for icloud...do I have to pay a separate $20/ month to get more storage or does the $20 include all members of the plan?
Welcome to Apple Support Communities
If your iCloud account uses your family's Apple ID, you will pay $20/year for all your family members. If your iCloud account uses a different Apple ID than your family's Apple ID, you will pay only for you -
I have a 4S and just tried updating to the latest iOS version and my phone went into recovery mode and iTunes says I need to restore to factory settings. Anyone know how I can fix my phone without losing all my content?
You would only be able to restore to a backup to iCloud or iTunes:
Restore from Backup
Cheers,
GB -
ere are the specs on the Mac I need more power on.
Mac Tower
Processor 2 x 2.26 GHz Quad-Core Intel Xeon
Memory 6 GB 1066 MHz DDR3 ECC
Graphics NVIDIA GeForce GT 120 512 MB
Serial Number H00354XF20G
Software OS X 10.8.5 (12F45)
Harddive 640 GB
SATA Disk
(2) Harddrives 1 TB
SATA Disk
RAM 6 slots total -- 6 are filled with 1GB
(3) UAD Quad cards installed
I use this computer stictly for audio recording.
Pro Tools 10.3.7
Interface Apollo 16
Pro Tools is curretnly not compatible with Maverick. Also, I believe that Pro Tools 10 only allows 4GB ram to be utilized (not sure )
I know Pro Tools 11 allows more, but not sure how much more. Also not sure if the upgrade to Pro Tools 11 I will have to purchase all new plug ins or if my existing ones will continue to work in it.
The platform changes from 32 bit to 64 with the upgrade to 11
If it is as simple as adding more ram, what mode-part #l would you recomeend. Can the processor be upgraded also ?
The new tube like Macs are non compatible with UAD Cards. Those cards a must my sessionsYou can use Activity Monitor to check if apps run as 32 or 64 bit - simply look at the "Kind" column (you may need to select it under View -> Columns) and see if the app in question is listed as "Intel" i.e. 32 bit or as "Intel (64 bit)".
While in Activity Monitor you can also check if Pro Tools is close to the 3-4 GB limit of a 32 bit app - if you aren't you will probably not benefit from more RAM.
Your MacPro (it appears to be a Early 2009 model) should have come with a small booklet showing how to install RAM and what kind of RAM that you need. Any RAM that fulfills the requirements should work but your safest choice is probably to buy from a retailer/online store that supports Macs as they will usually know what kind of RAM you need for your mac model.
Upgrading the CPUs should be possible, but I haven't seen Apple document how to do this, so you will probably have to google around a bit to find instructions and CPU part numbers.
Your choice of CPUs will also be limited by the motherboard and CPU socket so you may be limited to faster version of your current CPU chip and some slightly newer versions.
Going from your current CPU to the fastest version included in the 2009 MacPros would be going from 2.26 GHz to 2.93 GHz. This would only give a modest 30% speed boost. Using newer and highly clocked CPUs might boost this somewhat more maybe to 50% ? -
i am trying to update my ipod touch to 4.3.3. Itunes says it needs to be updated to 10.3.1 to do this, so i click update and then nothing happens.
please helpHi,
Here's the Link for iTunes for Windows:
http://support.apple.com/kb/DL1047
Read the Information Carefully to make sure your PC is Compatible with this Version
Cheers, -
Ipod classic won't synch. itunes says it needs to be reformatted
I have had this ipod classic for 2 years and have never had a problem with it. has this ever happened to yours? it is as if it is damaged according to itunes. the message said I can see the items on the ipod but can't change anything. itunes says it needs reformatting. i don't know what that means. thanks!
Care to share how you resolved the issure for others who might have the same issue?
OT -
My iPhone 5S says it's disabled and to connect to iTunes, iTunes says it needs 4 digit pass code. I tried to restore it but device wasn't recognised. Any ideas? I only got it yesterday.
How did the passcode get on the phone to begin with, if you "only got it yesterday"? Regardless, to remove it, you'll have to force the phone into recovery mode, as described here, & restore it:
http://support.apple.com/kb/ht1808
This will remove the passcode. -
Iphone's itunes says it needs a wifi connection, but its connected.
I have all the latest updates on my iphone. My iphone does not seem to be able to use my home network, despite the fact that it says it is connected... itunes says i needs a connection while wifi settings says it has one. any ideas?
Hey samuel,
What IP address shows up on the iPhone? Goto Settings>Wi-Fi> the blue (>)
Also, try making the iPhone forget the network if have not already done so.
If the issue persists goto Settings>General>Reset>Reset Network Settings and attempt to connect again.
Jason
Maybe you are looking for
-
ERROR in note Implementation 1847570 for SEPA project
Hi ALL, I Tried To implement note: 1847570 in ECC 6.00 SAP but I have a probleme that The package: FKK_SEPA Doesn't exist, Please Note that by implementing this note Only the program : RFKK_NOTE_1847570 is created, so i tried to create manu
-
How do you increase the thickness of lines?
Hi Hope you can help, im writing an applet which requires lines to be drawn on screen. I know how to draw the actual line but i'm having problems with the thickness of the line. I would like to make the line thicker but im not sure how to do this Any
-
IPad Emails received in Outlook with Garbled Simplified Chinese Characters
My iPad users sent emails to Outlook(2003,2007) users but Simplified Chinese characters are all not readable! The same email sent from Motorola smartphone has no such issue. I report the case to Apple support on Nov. 3 and heard nothing until now.
-
Photos fail on iphone sync on itunes
when I sync my iphone to itunes the option does not appear more photos. what I do ?? because I want to move photos from my pc to the iphone!
-
Satellite Pro L20 - need to re-install
Hiya, I have a customer who has several Toshiba Laptops but the one that I have a problem with is the L20 which is the latest Tosh that they have. Anyway, the End User had a stggering 4958 viral infections on his machine and the machine was just not