ITunes will not proceed to the next track in playlist
...if the computer is unplugged and running on battery power.
I run Windows Vista, and have had no issues like this for the ~2yrs I've had this system. If the PC is not plugged in and iz running on battery, my power settings are set to go to screen saver after 3 minutes. In the past, iTunes would keep playing music with the blank screen, continuing on with the playlist. Now just recently, once the screen saver kicks in, iTunes just stops at the end of the song. I can hit a button or move the touch pad to do away with the screen saver, and without further prompting (hitting "play" or anything) iTunes will start right up again with the next song. iTunes does not have this issue if the computer is plugged in. This issue presented itself before I upgraded to the latest version of iTunes, but has continued after the upgrade.
I can't find anything in the software settings that seem to be responsible. Neither am I sure what would be responsible in the computer settings, since I haven't changed them and it appears to be an iTunes problem.
All of the songs in my playlists are "ticked" and continue playing just fine if the computer is plugged in, even once the screen saver kicks in. I realize a simple solution would be to extend the time on my screen saver when operating on battery power, but I shouldn't have to do that. Any suggestions?
MDTfromDQ wrote:
I run Windows Vista
Found your problem.
Similar Messages
-
Itunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a nItunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a new dell, windows 7 ultimate, no virus or firewall programs installed.
This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013 -
Every time i play a song in my i-tune 10.6, about up to half way mark, i-tune will automatically skip to the next track and playing it (next track) at the same time as the current track. i don't know if anyone has the same problem, but i haven't sync my ipod touch 4 gen to my i-tune playlist for the longest time, cus i was afraid to transfer the problem to it since i have a pc (win 7) but not MAC.
i am sorry, guys, but I really really really need you guys' help. if u know ANYTHING...
-
My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error. The error first happened after I approved the an iTurns update.
Same problem today. Took five times to reinstall without any error messages. Apple has posted a way to fix and you should follow their's first. I finally got to upldate correctly by doing their fix but with one difference. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replace)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not specifically put in their fix but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try. Even updated my ipad to make sure everything was working. -
My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I have stopped using IE because it doesn't work, however my iTunes will not connect to the internet now because it is tied to the proxy setting in IE and now I am using FireFox, so, how do I get iTunes to see FireFox as my web browser.
i am having the same problem, i stopped using IE and installed firefox , only now my itunes store won't connect to the internet.
-
I updated my IOS on my iPhone 4S and it locked up. I had to restore my phone and now iTunes will not go past the setup your phone screen even though the phone as been restored. How do I get iTunes to go past this screen so I can sync my phone again?
Depending on what iPhone you have when you get to the connect to wifi you should be able to activate your device over cellular data. Try doing a hard reset by holding the home circle button an power button until an apple pops up and the go through the setup again and when you get to the wifi part a option should be setup with cellular data iPhone 4 and above should give this option sometimes doesn't like showing up that's why u have to do a hard reset first
-
Itunes will not connect to the store. I get no error message, the store just won't load.
Have you had a look here,
Can't connect to the iTunes Store
From here
http://www.apple.com/support/itunes/troubleshooting/ -
I just downloaded and installed the new iTunes on a Toshiba Satelite of some age. It was just completely reformated and updated with XP. iTunes will not open. The terms page comes up and when I agree it disappears. I have uninstalled and reinstalled.
Perhaps something here will help:
http://support.apple.com/kb/TS1421
Regards. -
When I go to iTunes and then check for updates. I can not do this action due to the fact iTunes will not connect to the internet although the internet is working just fine, what do I do to fix this issue? Apparently I am currently using iTunes 7.0.
If you're really using iTunes 7.0 you are very far behind the current version - maybe it is trying to connect to a decomissioned server. In fact I am kind of surprised it will run on a Macbook Air. Are you sure you are running iTunes 7?
-
I was attempting to update iphone 4s today, laptop went flat during the last stages. The iphone now only displays USB cord, with an arrow pointing towards iTunes emblem. iTunes will not accept/read the iphone. HELP??
If you have the latest version of iTunes you should not have to download the ipsw file separately as jalp suggests. iTunes will download it automatically.
This error (9) most often means that your antivirus or firewall (or router) is blocking access to Apple's servers. In rare instances it can also mean that the phone was hacked (or "jailbroken") to unlock it. If this is the case you must do a DFU restore, not Recovery Mode, as follows:
Reboot your computer
Disable your antivirus and firewall. If you has Kaspersky you may actually have to uninstall it, as it can never be turned completely off.
Connect the USB cable to a USB port directly on your computer, not to a hub. DO NOT connect the other end to the phone
Disconnect all USB devices except for mouse, keyboard and iPhone cable.
Launch iTunes
On the phone hold the HOME and SLEEP buttons at the same time for EXACTLY 10 seconds, then release the SLEEP button but continue holding the HOME button. The screen should be black. If it has an Apple logo this means you held both buttons too long. Release the HOME button and do it again.
While holding the HOME button connect the free end of the cable to the phone.
After a short while iTunes should recognize a phone in "recovery mode" (iTunes doesn't know the difference between DFU and Recovery modes, but the phone does)
Release the HOME button and don't touch the phone or the computer until the process completes or you get an error message. Ignore any displays on the phone.
If the error recurs the phone was probably messed up when it was hacked. This is not a hardware problem, or if it is, it isn't one you can fix.
You can try repeating these steps with a different computer and a different cable. If that fails also the phone is probably not repairable. -
When I am playing my music it will not advance to the next song, it just keeps repeating the song. The only way to go to the next song is to do it manually. It just started this after the last update. How do I fix it, hard to listen to at the gym.
Check the song and see if repeat is activated. Down in the bottom left corner is repeat when the music is running. It would have a colored box around it if it is active. It would either read Repeat Song, or Repeat Playlist.
-
When turning on my mac I get the first white screen with the apple logo but it will not load to the next login screen
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there. -
I have ebooks on my ipod and when I'm listening to a story it will not go to the next chapter, it just starts over again with the chapter I just listen too. How do I correct this? It didn't do this before.
ebooks is a term for (mainly) textual books that can be read on screen. If you're listening then I think you mean audiobooks. See audiobooks on iPods. Either reorganize as single files or access via a playlist.
tt2 -
I've downloaded the lastest iOS 7 update and now my videos from iTunes will not rotate to the landscape wide view. I can view other videos from the news, you-tube, movie trailers, etc in landscape wide view, but it's my music videos from iTunes that won't rotate. What's going on? Is there a fix?
Hi, you don't have screen rotation locked do you? If unsure there will be an icon like a padlock near the battery symbol on your phone.
Regards,
Steve
Maybe you are looking for
-
With Update 1.1.3 iPhone no longer syncs with iCal
I run Leopard on a MacBook Pro. After upgrading my iPhone to 1.1.3, iCal and the calendar on iPhone no longer syncs, at all. I brought this to the NYC Soho Apple Store, but the genius couldn't figure it out. Only the two default calendars "Home" and
-
Blue screen error code 0x00000050 and 0x0000000a on T430 (234234U)
Hi, I have a new T430 and it crashes with a bluescreen 0x00000050 and 0x0000000a, I have been having this issue intermittently. I've already checked the memory and hard drives with the: linux-bootable-cd-16.iso, with no problems. I tried to use the r
-
Cannot record Full Motion slides EVER
I recently upgraded to v.3 from 2 since I thought this would take care of the bugs that plagued my Captivate 2 experience. While they were annoying, I could still work around those issues comfortably and get my work accomplished. However after upgrad
-
Triggering ABAP Program upon file drop
Hi Gurus, I would like to trigger an ABAP program as and when a file is dropped in a drive. Please let me know what is the best way to do this. Also please let me know how to handle in the program if 2 or more files are dropped at a time. Appreciate
-
Ttf font not showing up in adobe products
Hi I have read through the various threads in this forum and others and have deleted illustrator preferences, rebooted, etc. Font is showing up in Microsoft Word, just not in any of the adobe products. Font is showing up in Font Book application. A