Itunes won't open i keep getting a problem report i press respond, but the report reappears and nothing else happens
the itunes on my mac wont open. I keep getting a problem report fro itunes, which i press the respond option. the box closes for approx 10 seconds then comes back. I have looked in the force close box but it is not appearing here.
Hi there duncanbev,
I would recommend taking a look at the troubleshooting steps found in the article below.
Troubleshooting iTunes installation on Mac OS X
-Griff W.
Similar Messages
-
Itunes won't open. I get a message that it is not compatible,switch to English
itunes won't open. I get a message that it is not compatible,switch to English
Hey D28PICKER!
I have an article here for you that can help you troubleshoot launch issues with iTunes:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Thanks for using the Apple Support Communities!
Cheers,
Braden -
Hi, I can't seem to get my ipod 32gb 4th gen to sync with itunes. It's brand new, but everytime I plug it in it says can't access Itunes store and nothing else happens. I enabled my firewall to allow itunes but it still can't access the store. Please help.
If you look at the feed, and look at the entry 'The end to an exciting field season in Aulavik National Park' you will see the line:
<pubDateFri, 29 Jul 2011 04:00:00 GMT</pubDate>
You have not closed the 'pubdate' tag - there should be a '>' as the 9th character. Because the tag has been left open, it invalidates everything which follows it, and thus the entire feed. iTunes therefore cannot read it, which is why the Store has not updated. Add the '>' and republish, and all should be well.
It's always worth checking your feed by subscribing manually, from the 'Advanced' menu, or by clicking the 'subscribe free' button on the Store page (both do the same thing) - if you can subscribe to the feed it should be OK. -
I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?
wm0203Sounds like the CD drive died. Luckily they cost next to nothing to replace. Or get an external LaCie instead. I have a dual G4 1.25 and the CD drive was always so anemic I use a LaCie Porsche with it.
-
I had some problems with ITunes and had to uninstall but now when I reinstall iTunes after I click on download iTunes and save the File, I get this message"Thank you for downloading iTunes" and nothing else happens. I don't see any thing else. Now not sure what else I have to do.
Thanks,
RanjitSee the further information area of Troubleshooting issues with iTunes for Windows updates.
tt2 -
I have just tried to connect my Mac book pro to an LG Plasma TV via an iWires Mini DisplayPort to HDMI cable. All I get on my TV is the Mac wallpaper and nothing else. I am missing something really silly, could anyone help please.
Hi there. I also bought an iWires mini Display port to HDMI cable and have an LG LED/LCD TV. I plugged it in to my MB Pro and followed the very small writing that came in the package and got both audio and video going. You need to change the audio settings from within System Preferences on your Mac to select your TV as the audio output.
My concern is the data latency - do you experience a delay between moving your mouse on the MBPro and the TV displaying the movement? It is only a fraction of a second, but certainly enough to be annoying, especially in a cable as expensive as the iWire. -
My itunes usnt working. I keep getting this message.
Problem signature:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 10.7.0.21
Application Timestamp: 504d85d9
Fault Module Name: QuickTime.qts_unloaded
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 4f8f8a5b
Exception Offset: 70be1040
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: b9b5
Additional Information 2: 063aa4ebde4a7a45f8c482e6ed282861
Additional Information 3: b251
Additional Information 4: 0639314542445d4694fa87cff3be7aa4Fault Module Name: QuickTime.qts_unloaded
Fault Module Version: 0.0.0.0
Try updating your QuickTime player to the most recent version. -
I have an iPad 2nd generation and all it does is show the apple logo continuously and nothing else. I cannot get into the iPad and I have tried to restore it numerous times but it comes up with error 19 or error 14. Or it restores but after it has it just comes back up with the apple logo once again and nothing changes or it flashes a few times. does anyone know how to fix this?
Cheers MegYou need to put your iPad into Recovery Mode. Follow the instructions in this Apple support document very carefully. It might take several attempts to get it to work.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
help. my iTunes wont open. I keep getting the message error7 (windows error 193). contacted Microsoft they said contact iTunes support. I have uninstalled all iTunes componets and then reinstalled everything but message still comes up... its driving me crazy.
If it's a Windows error, it's typically going to be a Microsoft problem. Uninstall any security software you have and if you have a restore point for your PC, you may want to restore your PC back to when iTunes was working normally. If none of those work you would need to contact Microsoft and demand help.
-
Itunes won't open. it keeps saying cannot be opened while being updated.
i have a macbook pro. i updated the os to mavericks maybe 2 months ago. now it is OS x version 10.9.4. last night i was trying to open iTunes. it said updates available so i clicked update. i left my computer on since last night and everytime i try to open iTunes it keeps saying "itunes is being updated. itunes cannot be opened while being updated." is that normal? there's no other program running. i am afraid to reboot the computer, i'm afraid that will cause it to crash.
Restart and see what happens. You won't be any worse off than you are now, as long as you have backups.
-
iTunes won't install on my PC after using it for several years, now I get the following error message; "The installer has insuficient privileges to modify this file:C:\programFiles\iPod\Acknowledgements\rtf." I get the same error message if I try to uninstall iTunes as well. I am the only user of this computer and am the administrater.
See the second box in Troubleshooting issues with iTunes for Windows updates.
tt2 -
I have opened the iPhoto First Aid window. When I press the repair button for the repair permissions operation, nothing happens but my iphoto opens at the place I have been stuck since July 3. What do I do now.
How big is your library? You should see the following:
OT -
Anyway, not sure if my question was sent, so here it goes: My friend's G4 won't power on....the power button lights up briefly when pressed, but nothing happens....and, cannot even get the montior to power on...does the same thing. He said it used to at least turn on, but now it's doing this. Help!!?? What should we do??
If you are able to use a multi-meter, you can test to see if the power supply is culprit. Use the Power Mac G4: Power Supply Voltage Test (Sawtooth G4) document to aide you in the proceedure.
If not the Sawtooth, Power Mac G4 (Gigabit Ethernet): Power Supply Voltage Test.
If a Quicksilver, use the pinout of the QS PSU connector here:
http://www.xlr8yourmac.com/tips/MDDps_mods/MDD_PSMods.html#update
and a testing description here:
http://www.jcsenterprises.com/Japamacs_Page/Blog/D275729F-09DA-4FBB-96B3-BEEEB2C 04619.html
The test description is for a MDD, but the basics are the same.
If a MDD,follow my instructions in the linked articl above.
One should also try a PMU reset:
http://support.apple.com/kb/ht1939
One should also replace the 1/2 AA PRAM battery.
Also, check that the 20, 22, 24 pin connector is properly fitted to the motherboard, and that the wires are properly inserted in the connector. There is also a 10 wire ribbon, which goes from the motherboard to the power button board. Make sure that the ribbon is firmly connected at both ends, and that there is no apparent damage to the ribbon.
If the power supply tests good in a MDD, the power switch board could be suspect. -
I've just downloaded itunes 12 onto my pc. When I connect my IPod classic 160gb, it's name shows up briefly before the ipod silhouette at the top left simply greys out and nothing happens.
Please advise.I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!! -
Please help, I keep removing and installing itunes but I still can't open it. Every now and then it will let me in but I can't do everything that I should be able to do.
I gave my two cents on another forum post, but will also place it here. I figure why not, more eyes and all that.
Not sure if you solved your problem, you probably did since there is no follow-up. But since I am in the midst of this quaundary, I'll give you a little heads up. I think 13010 might be when iTunes can't find a library. This does not mean your music is missing as you can have your media folder (containing all your actual iTunes files) and your library folder (the database that organizes all of your media files) in separate locations. I recently got a new computer and first pointed to the new media location and then also iTunes started to download the itunes library but for some reason deemed it damaged and may have removed it from it's original location as it can no longer find the library folder in that location.
My problem is this, no other forum post has helped me much in regards to the 13010 error. I removed the extras and genius files and still got the 13010 error. I reinstalled iTunes and still the 13010 error. At this point I am willing to scrap everything just to get a factory fresh version of iTunes and then attempt to import all my old media into it and then reorganize it myself. But as far as I know, there is no easy way to do this.
Maybe you are looking for
-
PLS-00402: alias required in SELECT list of cursor to avoid duplicate colum
Hello I need a little help with my PLSQL syntax. While the SQL in the select statement run well in a report when I change it to PLSQL 'FOR' statement it needs aliias(es). To that end, I not sure where and how many? Any help is very welcome Regards Pe
-
SAPF124 (F.13) exit / BTE / BADI to over rule the account number.
Hello experts, I have a requirement like while doing the automatic clearing of the open items (TCode F.13), the target account from table T030 should be overruled by a customer defined account finding based on the given tolerance goups. I just want t
-
About game programming.. please....help
How to define game map for java midlet If I see the rpg game, it have default map. I want to know how to translate it to code in midlet? The map will be existed image or dynamicly generated? Like Prince of Persia Midlet version, I wond
-
UI Template replicating itself
Anyone know why sometimes a UI template will replicate itself within itself? I have a several complex UI template with JavaScript and Styles defined inside of them. For some odd reason that I can't figure out, the template will exhibit the following
-
The drive reported an error: Sense Key = MEDIUM ERROR Sense Code = 0x73, 0x03 Anyone knows what does it mean? Why I can't burn a dvd on the computer's player? THanks