IView For GP - "Processes which I oversee"

We have a Business Requirement where the Business would like to see all the activities that's happening for a process. We are planning on assigning the user to "Overseer" role - But we do not want to give them the entire Runtime WorkCenter where they can initiate a new process as well. Is there any way we can launch the "Processes which I oversee" link (that's within the RTWC) directly via a iView without giving the users RTWC? We are in NW2004s SP09. Any help is appreciated!
Thanks!
- Rao

Hi Rao,
We also faced the same problem.
And We tried almost every iView provide by SAP . But we didn't find any result.
Runtime Work Center is one iView which contains all the Run Time information.
And the major drawback is that it contains link to 'Start a new Process' which is really horrible.
But somehow you can get related info by adding Run Time View named "Overview" to your process.
But this is again only useful if you are running single instance for process.
Regards,
Piyush

Similar Messages

Troubleshoot: How to process messages in "Recorded for Outbound processing"

Dear Experts,
I have File >XI(3.0)>IDoc scenario with 10-25 interfaces. Per interface an average of 200 msges.
Now we have an issue. from past 6 days all the messages for one of the interfaces are in status: "Recorded for Outbound processing"(with that single small black right arrow) in SXMB_MONI(around 1760 till now). Other than this few 100 messages for couple other interfaces are also in same status. There are other message interfaces using the same Idoc type; but they dont have this problem.
I have checked the queues: SMQ1/Q2. There are no errors. The other threads mention about some reports; but all are for error messages. So that also did not help!
On the first day someone had deleted the error queue entry. They had first checked the message in the queues but that was not showing any status. (This is very strange... but for some messages , the left most status column is not showing any status at all.. but while clicking on the end time column; I am getting the pop up which says succesfully processed). But this is not our problem right now.
Please help me process the messages in the "Recorded for Outbound processing" status.. some how!!!
Thanks in advance for your inputs....
P.N: Runtime workbench here is not configured properly. No CC monitoring tab; message monitoring shows only adapter messages etc.... So cannot check anything here

Thank you for your inputs.
@Udo.... SMQR- no issues.
The RFC destination is fine.
@Abhishek The Idoc has not reached SAP. The xml messages in XI are in "Recorded for outbound processing" which is kinda like Scheduled, i think. Anyway I checked the R/3 cant find the messages or errors.
Any help would be highly appreciated....

Error writing output with iview for xml form builder

Hi,
I created a Xml Form Builder's project in which I developed an "Edit" and "ListEdit" sheet.
I also created an iview for theese in which the code link is:"com.sap.km.cm.xmlform",and the field for Style Sheet for List and for single item are set up correctly,but when I tried the preview the following error message happened:
com.inqmy.lib.xsl.xslt.XSLOutputException: Error writing output. -> org.w3c.dom.DOMException: Root Element is already present, cannot be appended as a child.
could someone help me?
thank's a lot!
Nick.

Hi,
Now I'm confused,what do you mean with create new data? Are users editing existing documents
(as if they go to a document example.xml > edit) or they are creating new documents (as if they go
on folder > new > forms)?
The problem is, in both cases a user would need read/write permissions.
The normal flow content (data) is created in KM is as follows:
1. user is assigned to a role
2. role contains KM Navigation iView
3. KM Navigation iView executes com.sap.km.cm.navigation component
4. user chooses New > Form UI command (edit_xml_forms)
5. edit_xml_forms UI command executes its code (com.sapportals.wcm.rendering.uicommand.cm.UIXMLFormsCreateCommand) and open xml edit for the user
6. user fill the form and click Save, form is created into folder
For what I understood so far, your requirement basically asks you to go directly to step 5, it is
possible to pass a URL that goes directly to step 5, the UI command button, but if you do that
you won't have a context, so chances that it will work are slim, since a context is required to
fill the parameters asked by the app (like folder, user, permissions, etc). Even though, in some cases you can
still pass the parameters via post in the URL but you must know which service/parameters the
app asks for it, also a URL is static...
That was the create scenario, I think it's more cons than pros, users would still be
able to bypass the URL iView created for that, I'd suggest evaluating again if it's really
a problem having users access cm to manage data
kind regards,
Rafael

Troubleshooting the lockwaits for parallel processing jobs

Hi Experts,
I am facing difficulty tracing the job which is interfering with a business critical job.
The job in discussion is using parallel processing and the other jobs running at the time are also using the same.
If I see a lockwait for some process which may be a dailog process or update process spawned by these jobs, I am having difficulty knowing which one holding the lock and which one is waiting.
So, Is there any way we could identify the dailog or update processes which are used for parallel processing for a particular backgorund job.
Please help me as this is business critical and we have a high visibility in this area.
Any suggestions will be appreciated.......
Regards
Raj

Hi Raj,
First of all, please indicate if you are using SAP Business One. If yes, then you need to check those locks under SQL Management Studio.
Thanks,
Gordon

How to create a Guided Procedure URL for a process

Hi Experts,
In my scenario, i have to send the process instantiation URL to the users directly in a mail, so that the process will be instantiated from the mail on the link click, without going to the Portal, selecting the task and instantiating.
Is that possible without hardcoding the URL in mail, and getting URL using some class method?
Please help me out with this.
Thanks,
Runal

hi runal,
You can create an iview for the process.For that you just do the following
1. Navigate to Content Administration -> Portal Content -> Create a new iview of type Java WebDynpro
2.select-> Create a single full-page iView from each application variant
3->com.sap->cafeugpuiinst->com.sap.caf.eu.gp.ui.inst.AInstantiation-> AInstantiation
4. enter the field you want to display
5select next finish
6.property Select -> Application property process.template.id( Process id )&process.autostart=t
7.save the iview
with regards
Shanto Aloor

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

I am able to get color images in the continues shot but when i try to snap a color image which i need for my processing i get only a monocrome image

I have been using lv_vfw.llb VI's for grabbing images from a CREATIVE WEB CAM ,i am able to get color images in the continues shot but when i try to snap a color image which i need for my processing i get only a monocrome image ,i have been trying to play around with the RGB weightings but i am unable to get a color iamge,it shall be of great help if you could help me in doing this as it is urgent for me.Thanks for your help.

vicky,
I am unfamiliar with the lv_vfw.llb, and have not used it before. However, I noticed that you stated that you are able to grab in color, just not snap in color. If this is the case, why not just perform a grab and then extract a single buffer from this grabbed data, which would likely be in color? This seems like a possible solution to the issue that you are seeing.
Other than that, I really don't know enough about the lv_vfw.llb to be of much help on this issue. Hopefully another member of this forum will be able to assist you with this software.
Regards,
Jed R.
Applications Engineer
National Instruments

Configuring JMS adapter for a BPEL process which puts a msg in a Q of MQ

Hi,
I am trying to develop a BPEL process which picks up a message from a Q in Websphere MQ and puts that message in another Q of MQ after processing that.
I have updated the oc4j-ra.xml with the following inputs:
<connector-factory location="eis/MQSeries/Queue" connector-name="Jms Adapter">
 <config-property name="connectionFactoryLocation" value="com.ibm.mq.jms.MQQueueConnectionFactory"/>
 <config-property name="factoryProperties" value="QueueManager=TestManager;TransportType=1;Hostname=machine's ip address;Port=1414;Channel=channel name for connecting to client"/>
 <config-property name="acknowledgeMode" value="AUTO_ACKNOWLEDGE"/>
 <config-property name="isTopic" value="false"/>
 <config-property name="isTransacted" value="true"/>
 <config-property name="username" value="admin"/>
 <config-property name="password" value="welcome"/>
 </connector-factory>
But while testing the BPEL process, I get the error:
<remoteFault>
<part name="code" >
<code>null</code>
</part>
<part name="summary" >
<summary>file:/D:/OraBPELPM_2/integration/orabpel/domains/default/tmp/.bpel_MQMessaging_1.0.jar/Outbound.wsdl [ Produce_Message_ptt::Produce_Message(SourceEmployee) ] - WSIF JCA Execute of operation 'Produce_Message' failed due to: Adapter Framework unable to create outbound JCA connection. file:/D:/OraBPELPM_2/integration/orabpel/domains/default/tmp/.bpel_MQMessaging_1.0.jar/Outbound.wsdl [ Produce_Message_ptt::Produce_Message(SourceEmployee) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: ORABPEL-12141 ERRJMS_CONN_FAC_NOT_FOUND. Unable to instantiate connection factory. JMS adapter was unable to look up the connection factor com.ibm.mq.jms.MQQueueConnectionFactory neither through JNDI nor instantiate it as a Java class Please examine the log file to determine the problem. ; nested exception is: ORABPEL-12511 Adapter Framework unable to create outbound JCA connection. file:/D:/OraBPELPM_2/integration/orabpel/domains/default/tmp/.bpel_MQMessaging_1.0.jar/Outbound.wsdl [ Produce_Message_ptt::Produce_Message(SourceEmployee) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: ORABPEL-12141 ERRJMS_CONN_FAC_NOT_FOUND. Unable to instantiate connection factory. JMS adapter was unable to look up the connection factor com.ibm.mq.jms.MQQueueConnectionFactory neither through JNDI nor instantiate it as a Java class Please examine the log file to determine the problem. Please examine the log file for any reasons. Enable DEBUG logging in the BPEL Console. </summary>
</part>
<part name="detail" >
<detail>null</detail>
</part>
</remoteFault>
Can anyone tell me what has gone wrong in setting the connection factory for the Q or what else I have to configure to sort out this problem?
Thanks,
Jayatu

I am experiencing the exact same issue while configuring for Tibco EMS!!!
I have also checked the oc4j-xa.xml file etc and I am also unable to find any guidance on the steps required from XML config files through to adapter wizard entries!

We are looking for a software which converts SWF to MP4, we found many software which does the job but issue is file size is not optimize. We found Adobe captivate 6 which gives optimum quality with good output but thing is we do not have batch process i

Hi
We are looking for a software which converts SWF to MP4, we found many software which does the job but issue is file size is not optimize.
We found Adobe captivate 6 which gives optimum quality with good output but thing is we do not have batch process in captivate 6. so we request you to create a plugin or give a best option which have batch render quality and optimize in file size,

Captivate is e-learning development software not a dedicated video convertor, you are better off trying something like Adobe Media Encoder or Super.

IView for Activating Compensation Process Records (IT 759)

Does anyone know the iView for activating compensation process records (IT 759). There are iViews for compensation planning and compensation plan approval in the stndard MSS package but don't see one for activation.
Regards,
Sanjay Gera

Hi Sanjay,
Unfortunately, we do not have an iView for activation. You may need to develop a custom iView to pull in report RHECM_CHANGE_PROC_STATUS. Since that report is intended to run from R/3 and in bulk (read: background), you would want to consider data volume, browser compatibility to display results and last but not the least, security.
Donnie

Which is the the iview for SAP Contents: Create User?

hi,
a)
can somebody tell, how to access the EP create user iview?
i need to link there from an own application.
or better, which is the iview for the page: Create User?
Right now the url properties of my "Create User view" is:
http://myportal:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fadministrator!2fsuper_admin!2fsuper_admin_role!2fcom.sap.portal.user_administration!2fcom.sap.portal.user_management!2fcom.sap.portal.createNewUser?InitialNodeFirstLevel=true&windowId=WID1121850971390
but i suppose this won't work, because of the genaerated Querystring ?InitialNodeFirstLevel=true&windowId=WID1121850971390
is there an iview, which i might call via portal navigation
b)
is there a general way, how to access provided SAP stuff?
thanx,
matthias

Hi Matthias,
> the url properties of my "Create User view" is
From this you can derivate the iView name, it's com.sap.portal.createNewUser. Searching within the PCD, this iView (independent of the super admin role) can be found under pcd:portal_content/com.sap.pct/admin.templates/iviews/com.sap.portal.createNewUser
Checking this iView, the Code Link returns com.sap.portal.usermanagement.admin.CreateNewUser. This component is not creatable through "new iView from PAR" (for the reason see Browse deployment iview ).
On the other hand, if you need the URL, just open the page, choose "Add to browser favorites" from the page options, and then you'll see the working URL within your IE favorites, in this case:
http://myportal:50000/irj/portal?NavigationTarget=ROLES://portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_management/com.sap.portal.createNewUser
Hope it helps
Detlev

Which Mac Mini for word processing?

Hello, my partner is looking to buy a computer to use exclusively for word processing. Since she literally only wants to use a word processor – probably either MS Word or Nisus Writer – and nothing else (not even the internet), I suggested she might get a secondhand Mac Mini.
I was wondering if anyone had any particular advice on what to look out for – otherwise it would just be a case of seeing what the cheapest device on offer is at a local second-hand computer shop.
These would be the requirements:
1. It must be able to run at least Snow Leopard, in order to run a modern word processor.
2. It must be secure, i.e. not liable to break/malfunction easily. (My partner is writing a novel, so she doesn't want to lose it half way through!)
3. It must be able to start up quickly.
I'm assuming these are modest requirements, so I assume I'm really asking if there's any particularly dodgy models I should look out for etc.
Any thoughts welcome!
Jon

Adding an aftermarket SSD drive won't help keep the cost down though. To some extent, often startup doesn't matter much as many people never shut their Macs down. My MBP has not been turned off for more than a few days in 4 years - I'll sleep it when away from it, and the hard drive and screen are timed out to sleep, but I don't bother shutting it down and rebooting it often. And the difference in boot time for an SSD versus a HDD is likely going to be under one minute on any machine made in the last 3-5 years, so is it worth the cost for that, especially if you are only rarely restarting the machine? To my mind that answer is no, but everybody is different.
If I/O is an actually bottleneck or high activity issue on a machine, that is when an SSD becomes worth the extra cost, to my mind. For word processing, I/O will not be a limitation at all, even with an older 5400rpm conventional HDD, so using an SSD is largely paying for something without any real benefit. Even in terms of reliability, SSDs are hardly error free or not prone to failure, and in real world use or MTBF type ratings, a good quality conventional HDD is just as reliable as any decent SSD (and sometimes is more so for certain types of failures under heavy use read/write conditions).
Buying used is fine, if you know the place you are buying from and can trust them to only offer decent items. As long as you backup regularly so you can recover, a used item may suit your budget and needs just fine.
In the tight budget scenario though, it is hard to beat some of the available Windows PC consumer machines, and many of those are pretty good quality. MS Word is MS Word by and large, whether on OS X or Windows. Keep in mind for the PC route, the cost of decent AV (although many of the free tools are very good and more than enough if you are educated and savvy about what to do and not do with email or web sites&links).

Creating iView for BI queries and system

Dear All
I need your help in dealing with three challenges that i'm currently facing while trying to integrate BW into Portal.

Challenge 1:
I am trying to create an iView for BI queries but it is giving the following exception
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Could not find portal application com.sap.ip.bi.base.application.
Exception id: 04:32_26/06/07_0010_18800950
See the details for the exception ID in the log file
Can anyone help me in understanding what is it and how to resolve it?
Not able to infer anything from logfile.
System i created for connecting BW is OK for the connector test but fails for ITS and Web AS.
Challenge 2:
Is it necessary to for a system to pass all the tests (Web AS, ITS and Connector)?
Systems that i create almost never pass Web As and ITS test
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (eimreymdd0.eimskip.net:8001)
5. HTTP/S connection failed
ITS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Check the validity of any user mapping in the system object
7. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. Some of the following parameters are invalid: ITS Protocol () ITS Host Name ()
Challenge 3:
Out of the two versions (SAP BW 2.x/3.x and SAP NetWeaver BI)available in the portal to create Bex iView which one do we have to use?
I'm working on EP 7 and BW 7.

Hi,
If you are using BI 7 and EP 7, then you have to run either the post installation template from http://<host>:<port>/nwa ( Refer to Note 895736 - Configuration template for BI-JAVA usage type ) or Run program RSPOR_SETUP in BI.
I would suggest you to run BI configuration template from nwa alias.
To execute basic steps for automatically configuring the BI Java usage type for integration to the portal, proceed as follows:
1. Call the template installer by choosing quick link /nwa: <PORTAL_PROTOCOL>://<PORTAL_SERVER>:<PORTAL_PORT>/nwa
2. Under scenario, select BI Java.
3. Choose the BIPostInstallProcess template. Under Template, the individual steps that are executed by this template are also provided.
4. Choose Execute Template.
5. Adjust the default values under Data Entry. Note the following with respect to the input values:
ABAP:
ABAP_ADMIN and ABAP_PASSWORD are used for the RFC connection during installation
BACKEND_SYSTEM, BACKEND_SYSNUMBER, and BACKEND_CLIENT specify the BI system (AS ABAP)
BACKEND_HTTP_PORT can be determined using function module RSBB_URL_PREFIX_GET (or using the report)
BACKEND_SID is the system ID for the BI system
JAVA:
J2EE HOST and J2EE SID specify the J2EE Engine (AS Java)
J2EE HTTP PORT is the HTTP port of the J2EE Engine and has the numbering convention 5<J2EE_SYSNUMBER>00 (for example, 51000 for the system number 10)
P4PORT is the TCP/IP port of the Visual Administrator and can be calculated using <J2EE_HTTP_PORT>+4 (for example, 51004)
6. Choose Install.
Note:
You should only perform template-based configuration if the system has not been configured.
Cheers!!
Ashutosh

Create an iView for Xcelcius SP3 dashboard

I have created an iView for my Xcelcius SP dashboard and I keep getting an error when I click display. I used the instructions in the wiki page
http://wiki.sdn.sap.com/wiki/display/BOBJ/IntegrationofanXcelsiusdashboardinNetWeaverEnterprisePortal
The error I get is
Portal runtime error
An exception occurred while processing your request. Send the exception ID to your poral administrator. Exception id: 03:24-06/05/10_00089-2188150
Can anyone help with this iView creation?

hi Murali,
i have the following error when i try to access any dash boards (item dashboard, collection dashboard, bucket dash board etc.,)
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 10:40_27/07/10_0071_4073650
Refer to the log file for details about this exception.
i do not find this error(4073650) in the trouble shooting link which you provided. Please let me know if there is any other configuration missing.
Thanks
Sujata

Create iView for Webdynpro DC in CE 7.1

Hi all,
I have created a small Webdynrpo DC applicaiton in CE 7.11. I need to create iview for that application in the portal.Can anyone help me how to do that?. Bcoz there are mnay templates availble, i dono which one to use for WEbdynpro Java application.
pls suggest.
thanks,
raji

Hi buddy,
Do follow the following steps to create a WD Page in the PCD.
1. Logon to the portal with a user have content administration privileges.
2. Browse to Portal Content. Expand the node named "Web Dynpro Applications".
3. Browse the expanded node until you find your WD application.
4. Right click the application and select the option Copy.
5. Now browse to the project folder where you want to create the iview under the node Portal Content.
6. Right click the folder and select the option Paste as PCD Object.
7. Give the appropriate name and id and click next.
8. Click Finish to complete the process.
9. Open the newly created object and preview to see your work.
Hope this helps,
Good Luck!!!
GLM

IView For GP - "Processes which I oversee"

Similar Messages

Maybe you are looking for