IVR For Auto attendent Feature

Hi Friends
We have a customer requirement for implementing the "AUTO ATTENDENT" feature. We have to prepare the IVR for the same. The requirement is "1 should directly reach the extension number and 9 should directly reach the operator".
Pl tell how to perform this IVR. We want it very professionally.
Thanks and Regards
Karthik Sridharan

The way I setup Greetings Admin is
1. I create a CTI route point with an extension and set it to CallForwardAll to Voicemail.
2. Create a Call Handler in Unity with that Extension
3. Make you or the user who would be recording the prompts as the owner for the Call Handler. (In the Profile - select Owner - Subsriber - click Change - select the user)
4. Go to Greetings and Standard - In the Source - Select Blank - In the After Greeting Action Select Send Caller to - Scroll down and select Greetings Administrator.
It is setup now, you can call the extension you created and get to the IVR for Greetings Admin. To record Greetings for each Call Handler you would need to know the extension of the Call Handler and you the person recording prompts needs to be the owner for those Call Handlers.
If you want more than one users to be able to record prompts, then add them to a Public Distribution list in Unity and select the list as the owner in Step 3.
Let me know if you have any questions.
JoeL

Similar Messages

  • Cisco 2801 Auto Attendant

    hello
    I have 2 Cisco 2801 running CME 4.3 and will be converter to SRST Routers, but they''ll have T1 card, because they used to has FXO card with 4 lines now they will have T1, but I wonder witch solution for auto attendant should I have for those routers especially the Unity Express.
    Thanks

    Before switching to CM, think twice, because you will gain a lot of complications, consts, and loose nice features and flexibility if you do that.

  • Conductor Auto Attendant

    I've heard you can use Conductor to create an Auto-Attendant for vTP Server. Does anyone have a doc or an example they can share on how this is done if it is possible?
    thanks,
    rf

    TelePresence Server doesn't have an auto attendant feature, only the MCU products do.  Can you explain more about what you heard, perhaps you're speaking of something else and mistaken it to be an auto attendant?

  • Upgrading to Lion on MacBook Pro: Can I turn of that new auto save feature?

    I am going to be upgrading (or downgrading - yikes!) to Lion.
    Is there any way to turn off that new feature that saves every single version of a document?
    And, will Lion in anyway change my years worth of stored files totalling 60 GB? It is important for me to preserve them intact for various legal purposes, i.e. I cannot have a document created or modified on June 1, 2002 changed to today's date. Could that happen?
    Much love to all those helping people make the transition to Lion (THAT INCLUDES YOU KAPPY)!
    PS: I am currently running 10.6.8 on a MacBook Pro 5,1 -- Has anyone in the class of 5,1 upgraded to Lion yet? Thoughts?

    Yeah but Eww this auto save thing is insane!
    Why?  Are you under the mistaken impression that it stores multiple full copies of a document?  That is not the case.  Only the changes are stored to minimize the extra space used.
    After all my years of seeing people wish for auto-save features, I never guessed that when they got it people would be wishing to NOT have it...
    So is the amount of space that gets eaten up
    What amount of space is that?  By what?
    I think you're paying too much attention to people having problems.  That's basically ALL you get here.  This is where people come with problems.  So the information you're getting here has a serious selection bias...  you're not hearing what all the people who are NOT having problems have to say.
    This is nothing like the tiger to Leopard change or the Leopard to snow leopard change
    You're right, this is much more minor.  I'm actually surprised by how quickly things seem to be calming down here.  These forums were in a serious turmoil for months after SL's release!
    AND this update is taking away our right to those minor customizations that make our Mac OUR Mac
    How so?  Again, it sounds like you're listening to the wrong people or pulling "facts" out of thin air.  My MBP is just as customized in Lion as it was in SL, and is running quite smoothly.

  • SPA525G2 - auto attendant possible?

    Hi all,
    Is there any way to have an auto attendant feature on the SPA525G2 without intervention from the telephony service provider?
    We have a Billion 7800VDOX modem & 2x SPA525G2 phones connected via Ethernet.

    Hello nigel000111,
    As the phone does not manage the Auto Attendant (AA)itself you will need 1 of two things.
    First:  Have your provider provide the AA feature (if they allow it)
    Second:  Have a local Call control device to manage call routing.  (Example:  Asterisk, or BE 6000).
    Though in your case I would contact your provider to see if they allow this feature.
    Hope this helps.
    Regards,
    Michael D.

  • CUE Auto Attendant Sample Script into French

    Hello,
    I'm looking forward a sample script into french (with audio also in french) for Auto Attendant application.
    Thanks in advance,
    A. Delrue

    Hi Markus. Thanks a lot i did not think about this subflow !
    I have a warning when associating the script to the application: "Warning: Application created successfully, but might not be fully functional due to internal errors"
    And application is not working... Traces on CUE showing:
    28375 03/01 10:24:06.463 ACCN APMG 0 UNABLE_INVOKE_APP:Unable to invoke application: Application=App[name=fermeture,type=Cisco Script Application,id=6,desc=fermeture,enabled=true,max=4,valid=false,cfg=[ApplicationConfig[,name=fermeture,id=6,type=Cisco Script Application.description=fermeture,enabled=true,sessions=4,script=SCRIPT[playgreetingxfermbx.aef],access=4,privilege=1,script=SCRIPT[playgreetingxfermbx.aef]]]],Exception=com.cisco.app.InvalidApplicationException: failed to load script; nested exception is:
            com.cisco.script.InvalidScriptException: invalid script: playgreetingxfermbx.aef; error in Play Prompt is: Play Prompt: Invalid Prompt: com.cisco.expression.EmptyExpressionException: no formula entered (line: 1, col: 1); nested exception is:
            com.cisco.expression.EmptyExpressionException: no formula entered (line: 1, col: 1); nested exception is:
            com.cisco.wfapi.WFInvalidWorkflowException: invalid script: playgreetingxfermbx.aef; error in Play Prompt is: Play Prompt: Invalid Prompt: com.cisco.expression.EmptyExpressionException: no formula entered (line: 1, col: 1); nested exception is:
            com.cisco.expression.EmptyExpressionException: no formula entered (line: 1, col: 1)
    Any idea ?
    Thanks a lot, Julien.

  • Cisco TCL auto attendant without dial extension number

    Hello, Im trying to use the TCL for auto attendant from the file its-Cisco.2.0.1.0.tcl but I need just the auto attendant prompt and not the extension number. At this moment I can do that but I listen two prompts (en_welcome.au and en_enter_destination.au) and I need just to listen the first one.
    Regards
    Rodrigo

    Hello, Im trying to use the TCL for auto attendant from the file its-Cisco.2.0.1.0.tcl but I need just the auto attendant prompt and not the extension number. At this moment I can do that but I listen two prompts (en_welcome.au and en_enter_destination.au) and I need just to listen the first one.
    Regards
    Rodrigo

  • Can Lync 2013 work as IVR (auto-attendant ) for dialing Lync users?

    Hi All,
    Can Lync 2013 works as IVR (Auto-attendant) for dialing lync users?
    We want to migrate IVR from Nortel to Lync 2013. PSTN users call auto.attendant for dialing Lync users instead to dialing 1 for sales, etc?
    Regards
    José Osorio

    Hi,JOSE,
    There are two types of Response group,one is IVR group and the other is hunt group,if you would like to route the callers to a special queue without asking any question then you can use the hunt group,otherwise you can use the IVR group.
    Regards,
    Sharon
    Sharon Shen
    TechNet Community Support
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

  • HT5824 I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have number

    I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have numbers synced to iCloud.
    I tried to undo it but the app crashed.
    I am hoping there's like a previously saved version of my file in iCloud somewhere. 

    No, iOS does not do short term incremental back ups to iCloud such as you get with Time Capsule.It backs up when you do soo manually, or if set properly, when the device is plugged in and connected to WiFi. It will not have saved your changes as of 10 minutes prior.

  • "Auto Play" feature for Videos on iPod Classic 160Gb

    I have a 160GB iPod Classic, that just came out about a year ago, and it is updated with the latest firmware (or so says iTunes). I’m also using iTunes 8. I have also gone through all the usual help desk diagnostic processes, the ones in which they assume we, the consumers, are MORONS and cannot do the basic "self-fixes" prior to contacting them +(I have reset, then restored the iPod and have the latest version)+. I am still having this issue.
    With my original iPod Classic I scroll to Video and click on one of the show’s folders within it, and by simply pressing the PLAY button while the folder containing the videos is highlighted, the iPod Classic would play ALL videos within that folder. Now, with the remanufactured one they sent to replace my defected one, when I scroll to Video, click on one of the subfolders and press play, a blank “play” screen comes up and nothing else happens. No videos play and no sound. So now, instead of being able to play all within the folder, I have to open the show’s folder, and click on the individual episode and play them individually instead of having an “auto play” feature as before so that I could leave the iPod alone and do other things without having to bother with it.
    Is there a fix to this? Thanks!

    I am not sure if we understand each other. I knew about all the fields under "Get info" feature and I have filled all of them. The problem is that the movies are not sorted according those fields in the iPod! I mean I can easily see list of genres in the music section of my iPod. But you can never see the same in the movies section! The only list which is available for movies is list of all movies sorted by title. You cannot for example see all movies with selected artist. You cannot see all movies from compilation "Holidays 2008". You cannot sort movies by genre.... I mean you can do it in iTunes, but it has no influence on iPod.

  • How to place an icon of a website (say my bank) onto my desktop for quick, regular access. Also, does firefox have an auto-fill feature?

    How to place an icon of a website (say my bank) onto my desktop for quick, regular access.
    Also, does Firefox have an auto-fill feature?

    https://support.mozilla.com/en-US/kb/Creating+a+desktop+shortcut+to+a+web+page
    Firefox doesn't have a true "autofill", but rather a form autocomplete. <br />
    [http://support.mozilla.com/en-US/kb/Form+autocomplete] <br />
    '''The difference being that form autocomplete recalls form data you have completed previously, and sometimes has totally inappropriate suggestions. Whereas, autofill uses data that you set up ahead of time - not "form history", and has a lot better accuracy.'' <br />
    There are a number of extensions that add a true "autofill" to Firefox. <br />
    https://addons.mozilla.org/en-US/firefox/addon/4775

  • I need a multiple message voice mail app for Iphone 4S that also provides an auto-attendant, e.g the caller can dial 1 for one of business's or 2 for the other. Each of these options will need to have a different voice mail greeting. Help please?

    I need a multiple message voice mail app for Iphone 4S that also provides an auto-attendant, e.g the caller can dial 1 for one of business's or 2 for the other. Each of these options will need to have a different voice mail greeting. Help please?

    There are no alternative voicemail apps - the core functionality of the phone can not be replaced.
    You'll have to look for an external service, that can then forward calls for each caller onto the correct phone.
    At our business we use Voipfone.co.uk which allows multiple phone lines to come into one VOIP account.

  • Custom Auto Attendant Prompts through TUI not working for users who migrated from 2010 to 2013

    In Exchange 2010, we started using unified messaging and set up Auto Attendants. We setup a admin role/RBAC for people of a security group to be able to update the message on the auto attendants. They have the UMPrompts assigned role. All of this is working
    great in 2010. We have now migrated to 2013, and the users who were migrated from 2010 to 2013 can no longer update the messages through TUI. Newly created 2013 users can and are assigned the EXASCT same permission as the users who have been doing this for
    well over a year on 2010.  When they call the AA and press #,* they are asked to provide their extension, after doing so the system tells them that extension is not correct. and asks for the extension again.  Newly created users with the same permissions
    get prompted for their PIN and can log in and change the message just fine. 
    Confirmed Bug?  anybody else having this issue?
    What would be different for this process between a user who was migrated from a previous version like 2010 compared to a newer user who has only ever existed on 2013?

    What if the migrated 2010 users are in the same DB as the system mailbox? I had a similar issue during a migration; http://www.skypeadmin.com/2014/11/10/known-issue-um-automated-attendant-tui-editing-broken-migration/
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • How do I find the 'auto fil' feature for Firefox?

    how do I find the 'auto fil' feature for Firefox?

    Hi jasmtch,
    I am assuming you are talking about auto fill for forms and not password/logins, correct? If that is the case, just take a look at the Knowledge Base article [[Form autocomplete]]. This will give you all the information you need to use and manage the autocomplete feature.
    Hopefully this helps!

  • Using Skype as a auto attendant / switchboard

    Is there a way to use a Skype number to call multiple skype users, so the first one to pick up takes the call?  Also is there any auto-attendant capability - so that you can have some press 1 for one extension and 2 for another etc.

    This needs to be made available. Auto attendant is a good feature for skype and its a good option for companies to use if they have  high call volumes.
    We wish this would be done within 1 year(s)
    Thanks!
    Regards,
    Jacob's Sales & Tech Store

Maybe you are looking for