Cisco 2801 Auto Attendant

hello
I have 2 Cisco 2801 running CME 4.3 and will be converter to SRST Routers, but they''ll have T1 card, because they used to has FXO card with 4 lines now they will have T1, but I wonder witch solution for auto attendant should I have for those routers especially the Unity Express.
Thanks

Before switching to CM, think twice, because you will gain a lot of complications, consts, and loose nice features and flexibility if you do that.

Similar Messages

Cisco TCL auto attendant without dial extension number

Hello, Im trying to use the TCL for auto attendant from the file its-Cisco.2.0.1.0.tcl but I need just the auto attendant prompt and not the extension number. At this moment I can do that but I listen two prompts (en_welcome.au and en_enter_destination.au) and I need just to listen the first one.
Regards
Rodrigo

Hello, Im trying to use the TCL for auto attendant from the file its-Cisco.2.0.1.0.tcl but I need just the auto attendant prompt and not the extension number. At this moment I can do that but I listen two prompts (en_welcome.au and en_enter_destination.au) and I need just to listen the first one.
Regards
Rodrigo

Configure Cisco CME auto-attendant to forward call after ext is dialed

I am trying to configure my CME if the auto attendant picks up and a users extension is dialed after hours to forward that call to the number configured for that extension, currently if the extension is dialed the call is not forwarded.
Thank you,
-Tom

Hi,
I have same or similar issue, when a person call my company and press option 3 for example (after hour) the call get forward to a manager mobile number, my question is how can I disable the forwarding from CUCM? the OS i use is
8.6.2.22900-9
Many thanks

Cisco UC560 java.lang.NullPointerException error when opening "auto attendant" CCA

Hi Guys,
In CCA i get the error:java.lang.NullPointerException and it is only when selecting "Auto Attendant".
No Configuration has been done via CLI
Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 15.1(4)M5, RELEASE SOFTWARE (fc1)
CCA version 3.2(2)
Attaching CCA logs
Any Ideas ?

I would suggest downloading the latest version of the IDE (v. 5.0) which is available at:
http://wwws.sun.com/software/sundev/jde/index.html

What's wrong? Verify and compare Cisco 2901 config after loading old config from Cisco 2801

Hi Cisco Community / Friends,
I am new to this site though I have cisco account for many years. I am a CCNA ,I passed my certification on January 2013 I seldom use and utilized my skills on networking becuase of my type of work. I am Project Eng'r working in a System integrator company . Anyway, I would like to ask assistance on the configurations of my Cisco router for this gov't projects.. Here's the situation.
We have a new project for the VSAT Comm'n of Coast Watch Station , The VSAT was installed 7 years ago. The VSAT was only used for a year by this Gov't agency because of subscription issue. Now, they wants to revive and use their VSAT facilities for the Coast watch monitoring. Now, some of this routers are working up to now and for some site are already defective so I need to replace the old 2801 router with a new equivalent model which is Cisco 2901. My plan was just to load the old config into the new Cisco 2901 router. However, after loading it to the new router, I am a little worried because I've got some errors received. I load the old config by copying the old files, edit it in notepad, and load the config using Secure CRT (terminal emulator). When I copy the old config of cisco 2801 to new router cisco 2901 , below are the command not recognized on Cisco 2901. What's wrong ? What are these commands for?
Appreciate your comments and help on this matter.. Thank You very much
Note: I Attached the original config from Cisco 2801 and the other file is the config after I load the config file to Cisco 2901.
(Errors see below)
CWS_4_Pandami(config-erm)#mmi polling-interval 60
                         ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config-erm)#no mmi auto-configure
                               ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config-erm)#no mmi pvc
                               ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config-erm)#mmi snmp-timeout 180
                                                        ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config-if)#interface GigabitEthernet0/1
CWS_4_Pandami(config-if)# description ===CWS4 SAT Modem===
CWS_4_Pandami(config-if)# bandwidth 256
CWS_4_Pandami(config-if)# ip address 192.168.42.1 255.255.255.0
CWS_4_Pandami(config-if)# duplex auto
CWS_4_Pandami(config-if)# speed auto
CWS_4_Pandami(config-if)# priority-group 1
                                                    ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config)#access-list 100 permit ip any any dscp cs5
CWS_4_Pandami(config)#priority-list 1 protocol ip high list 100
                          ^
% Invalid input detected at '^' marker.

Hi
From Cisco's website:
The Modem Management Interface (MMI) is software that enables auto-provisioning for the Cisco 827 routers. The MMI uses a fixed PVC to communicate with the Proxy Element (PE) residing on the digital subscriber line access multiplexer (DSLAM). Using MMI, the Cisco 827 router updates the running image and downloads the prescribed configuration using a configuration file or configuration values in a provisioning information database.
The customer premise equipment (CPE) can be automatically configured using the Cisco DSL CPE download, but it can be configured only with the image provisioning feature.
So because this is your device, you don't want to use MMI anyways.
And "priority-list" is QoS. Probably that QoS-command is old and removed, because now QoS is configured using class-maps and policy-maps.

Multiple Schedules and Auto Attendant in UC560

Dear all,
I have configured two schedules in UC560 using CCA 3.0.1 (office_hours and break_time). I have then configured two auto-attendants. AA1 is used for office_hours and AA2 for break_time. AA1 is working fine. However, when it is break time, AA2 is not being used, instead the menu for closed hours in AA1 is used. If I swap office_hours and break_time as AA2 and AA1, then break_time is ok while office_hours settings do not work.
Internally, I can dial both AA extension numbers and get the correct prompt. The problem is when an external call comes in.
Any ideas what I may be doing wrong?

Hi Tiziana,
Sorry, I should have been more specific. What you have there is the built in script editor express. You can download the standalone CUE script editor here:
http://www.cisco.com/cisco/software/release.html?mdfid=282825559&softwareid=282774364&release=7.0.6&relind=AVAILABLE&rellifecycle=&reltype=latest
Edit to add: I think there are also some sample scripts that may help you out there as well. Here is also the Unity Express Script Editor guide.
Best,
David

All off-silte call directly goes to Auto Attendant

Hello everyone,
I have an issue with UC520. There is one PSTN line connected to the voice port 0/2/0, All dial out works fine, All off-site calls goes directley to the Auto Attendant, however, interal dial-in works fine, I mean user can dial internal extension properly but not from offsite to insite.
I was wondering if any one can help me.
Here is the partal UC configuration:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.01.13 13:51:51 =~=~=~=~=~=~=~=~=~=~=~=
sh run
Building configuration...
Current configuration : 31685 bytes
dot11 syslog
dot11 ssid uc520-data
vlan 1
authentication open
dot11 ssid uc520-voice
vlan 100
authentication open
ip source-route
ip cef
ip dhcp relay information trust-all
ip dhcp excluded-address 10.1.1.1 10.1.1.10
ip dhcp excluded-address 192.168.10.1 192.168.10.10
ip dhcp pool phone
network 10.1.1.0 255.255.255.0
default-router 10.1.1.1
option 150 ip 10.1.1.1
ip dhcp pool data
import all
network 192.168.10.0 255.255.255.0
default-router 192.168.10.1
ip name-server 63.203.35.55
ip inspect WAAS flush-timeout 10
ip inspect name SDM_LOW dns
ip inspect name SDM_LOW ftp
ip inspect name SDM_LOW h323
ip inspect name SDM_LOW https
ip inspect name SDM_LOW icmp
ip inspect name SDM_LOW imap
ip inspect name SDM_LOW pop3
ip inspect name SDM_LOW netshow
ip inspect name SDM_LOW rcmd
ip inspect name SDM_LOW realaudio
ip inspect name SDM_LOW rtsp
ip inspect name SDM_LOW esmtp
ip inspect name SDM_LOW sqlnet
ip inspect name SDM_LOW streamworks
ip inspect name SDM_LOW tftp
ip inspect name SDM_LOW tcp
ip inspect name SDM_LOW udp router-traffic
ip inspect name SDM_LOW vdolive
no ipv6 cef
multilink bundle-name authenticated
stcapp ccm-group 1
stcapp
stcapp feature access-code
stcapp supplementary-services
port 0/0/0
fallback-dn 301
port 0/0/1
fallback-dn 302
port 0/0/2
fallback-dn 303
port 0/0/3
fallback-dn 304
trunk group ALL_BRI
translation-profile outgoing PROFILE_ALL_BRI
voice call send-alert
voice rtp send-recv
voice service voip
sip
no update-callerid
voice class codec 1
codec preference 2 g729r8
voice class custom-cptone CCAjointone
dualtone conference
frequency 600 900
cadence 300 150 300 100 300 50
voice class custom-cptone CCAleavetone
dualtone conference
frequency 400 800
cadence 400 50 200 50 200 50
voice register global
max-dn 56
max-pool 14
voice translation-rule 4
rule 15 /^...$/ /0354434848/
voice translation-rule 1000
rule 1 /.*/ //
voice translation-rule 1111
voice translation-rule 1112
rule 1 /^0/ /*/
voice translation-rule 2222
voice translation-profile CALLER_ID_TRANSLATION_PROFILE
translate calling 1111
voice translation-profile CallBlocking
translate called 2222
voice translation-profile OUTGOING_TRANSLATION_PROFILE
translate called 1112
voice translation-profile PROFILE_ALL_BRI
translate calling 4
voice translation-profile nondialable
translate called 1000
voice-card 0
dspfarm
dsp services dspfarm
license udi pid UC520W-8U-2BRI-K9 sn FHK131827A2
archive
log config
logging enable
logging size 600
hidekeys
username cisco privilege 15 secret 5 $1$TC0B$LXMORw4u1vQpD/2eJdN4W1
username admin privilege 15 password 0 admin
username parham privilege 15 password 0 parham
ip tftp source-interface Loopback0
translation-rule 22
bridge irb
interface Loopback0
description $FW_INSIDE$
ip address 10.1.10.2 255.255.255.252
ip access-group 101 in
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/0
description $FW_OUTSIDE$
ip address dhcp
ip access-group 104 in
ip nat outside
ip inspect SDM_LOW out
ip virtual-reassembly in
duplex auto
speed auto
interface Integrated-Service-Engine0/0
description cue is initialized with default IMAP group
ip unnumbered Loopback0
ip nat inside
ip virtual-reassembly in
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface FastEthernet0/1/0
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/1
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/2
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/3
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/4
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/5
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/6
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/7
switchport voice vlan 100
no ip address
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/8
switchport mode trunk
no ip address
macro description cisco-switch
interface BRI0/1/0
no ip address
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
interface BRI0/1/1
no ip address
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
interface Dot11Radio0/5/0
no ip address
ssid uc520-data
ssid uc520-voice
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
interface Dot11Radio0/5/0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0/5/0.100
encapsulation dot1Q 100
bridge-group 100
bridge-group 100 subscriber-loop-control
bridge-group 100 spanning-disabled
bridge-group 100 block-unknown-source
no bridge-group 100 source-learning
no bridge-group 100 unicast-flooding
interface Vlan1
no ip address
bridge-group 1
bridge-group 1 spanning-disabled
interface Vlan100
no ip address
bridge-group 100
bridge-group 100 spanning-disabled
interface BVI1
description $FW_INSIDE$
ip address 192.168.10.1 255.255.255.0
ip access-group 102 in
ip nat inside
ip virtual-reassembly in
interface BVI100
description $FW_INSIDE$
ip address 10.1.1.1 255.255.255.0
ip access-group 103 in
ip nat inside
ip virtual-reassembly in
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/gui
ip nat inside source list 1 interface FastEthernet0/0 overload
ip route 10.1.10.1 255.255.255.255 Integrated-Service-Engine0/0
control-plane
bridge 1 route ip
bridge 100 route ip
voice-port 0/0/0
cptone AU
voice-port 0/0/1
cptone AU
voice-port 0/0/2
cptone AU
voice-port 0/0/3
cptone AU
voice-port 0/1/0
cptone AU
voice-port 0/1/1
cptone AU
voice-port 0/2/0
translate calling 1112
connection plar opx 398
description Configured by CCA 4 FXO-0/2/0-Custom-AA
caller-id enable
voice-port 0/2/1
connection plar opx 398
description Configured by CCA 4 FXO-0/2/1-Custom-AA
caller-id enable
voice-port 0/2/2
connection plar opx 398
description Configured by CCA 4 FXO-0/2/2-Custom-AA
caller-id enable
voice-port 0/2/3
connection plar opx 398
description Configured by CCA 4 FXO-0/2/3-Custom-AA
caller-id enable
voice-port 0/4/0
auto-cut-through
signal immediate
input gain auto-control -15
description Music On Hold Port
sccp local Loopback0
sccp ccm 10.1.1.1 identifier 1 version 4.0
sccp
sccp ccm group 1
associate ccm 1 priority 1
associate profile 1 register confprof1
dspfarm profile 1 conference
description DO NOT MODIFY, active CCA conference profile - CCA2.0 codec711
codec g711alaw
codec g711ulaw
maximum conference-participants 32
maximum sessions 2
associate application SCCP
dial-peer voice 2000 voip
description ** cue voicemail pilot number **
destination-pattern 300
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
no vad
dial-peer voice 2001 voip
description ** cue auto attendant number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 398
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
no vad
dial-peer voice 2012 voip
description ** cue prompt manager number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 739
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
no vad
dial-peer voice 90 pots
description AU-Mobile
preference 1
destination-pattern 04........
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 68 pots
description NSW Number
preference 1
destination-pattern 02........
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 69 pots
description TAS Number
preference 1
destination-pattern 03........
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 70 pots
description WA-SA-NT number
preference 1
destination-pattern 08........
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 72 pots
description QA-number
preference 1
destination-pattern 07........
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 74 pots
description International number
preference 1
destination-pattern 0011T
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 30 pots
description Australia-1800
preference 1
destination-pattern 1800......
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 31 pots
description Australia-1300
preference 1
destination-pattern 1300......
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 32 pots
description 13 Australia
preference 5
destination-pattern 13....
port 0/2/0
forward-digits all
dial-peer voice 67 pots
description mel-number
preference 1
destination-pattern 9.......
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 75 pots
description mel-Number
preference 1
destination-pattern 8.......
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 76 pots
description VIC number
preference 1
destination-pattern 5.......
port 0/2/0
forward-digits all
no sip-register
dial-peer voice 33 pots
description Emergency NUmber
preference 1
destination-pattern 0000
port 0/2/0
forward-digits all
no sip-register
no dial-peer outbound status-check pots
telephony-service
sdspfarm conference mute-on 111 mute-off 222
sdspfarm units 5
sdspfarm tag 1 confprof1
conference hardware
video
max-ephones 14
max-dn 56
ip source-address 10.1.1.1 port 2000
max-redirect 20
auto assign 1 to 1 type bri
calling-number initiator
service phone videoCapability 1
service phone webAccess 0
service dnis overlay
service dnis dir-lookup
timeouts interdigit 7
system message UC520
url services http://10.1.10.1/voiceview/common/login.do
url authentication http://10.1.10.1/CCMCIP/authenticate.asp
load 7906 SCCP11.9-2-1S
load 7911 SCCP11.9-2-1S
load 7931 SCCP31.9-1-1SR1S
load 7960-7940 P00308010200
load 521G-524G cp524g-8-1-17
time-zone 48
date-format dd-mm-yy
voicemail 300
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
hunt-group logout HLog
multicast moh 239.10.16.16 port 2000
web admin system name cisco secret 5 $1$NPt8$6I2moMN32fQoz083VCFm90
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern 0.T
transfer-pattern .T
secondary-dialtone 0
night-service day Sun 17:00 09:00
night-service day Mon 17:00 09:00
night-service day Tue 17:00 09:00
night-service day Wed 17:00 09:00
night-service day Thu 17:00 09:00
night-service day Fri 17:00 09:00
night-service day Sat 17:00 09:00
create cnf-files version-stamp 7960 Dec 23 2013 10:55:20
ephone-template 15
softkeys remote-in-use Newcall
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd HLog Login
softkeys seized Cfwdall Endcall Redial Pickup Meetme Gpickup Callback
softkeys connected Hold Endcall Trnsfer Confrn ConfList RmLstC Acct Park Select Join
button-layout 7931 2
ephone-template 16
softkeys remote-in-use Newcall
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd HLog Login
softkeys seized Cfwdall Endcall Redial Pickup Meetme Gpickup Callback
softkeys connected Hold Endcall Trnsfer Confrn ConfList RmLstC Acct Park Select Join
ephone-template 17
softkeys remote-in-use CBarge Newcall
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd HLog Login
softkeys seized Cfwdall Endcall Redial Pickup Meetme Gpickup Callback
softkeys connected Hold Endcall Trnsfer Confrn ConfList RmLstC Acct Park Select Join
ephone-template 18
softkeys remote-in-use CBarge Newcall
softkeys idle Redial Newcall Cfwdall Pickup Gpickup Dnd HLog Login
softkeys seized Cfwdall Endcall Redial Pickup Meetme Gpickup Callback
softkeys connected Hold Endcall Trnsfer Confrn ConfList RmLstC Acct Park Select Join
button-layout 7931 2
ephone-dn 5 dual-line
number 301 no-reg primary
label 301
description PhoneA Analog
name PhoneA Analog
ephone-dn 6 dual-line
number 302 no-reg primary
label 302
description PhoneB Analog
name PhoneB Analog
ephone-dn 7 dual-line
number 303 no-reg primary
label 303
description PhoneC Analog
name PhoneC Analog
ephone-dn 8 dual-line
number 304 no-reg primary
label 304
description PhoneD Analog
name PhoneD Analog
ephone-dn 9
number BCD no-reg primary
description MoH
moh out-call ABC
ephone-dn 10 dual-line
number 201 no-reg primary
pickup-group 1
label 201
description Extension 201
name Receptionist Receptionist
mobility
call-forward busy 300
call-forward noan 300 timeout 20
ephone-dn 11 dual-line
number 207 no-reg primary
label 207
description Extension 207
name None None
ephone-dn 12 dual-line
call-waiting ring
number 203 no-reg primary
pickup-group 1
label 203
description Extension 203
name Peter Steve
call-forward busy 300
call-forward noan 300 timeout 15
huntstop channel
ephone-dn 13 dual-line
call-waiting ring
number 204 no-reg primary
pickup-group 1
label 204
description Extension 204
name Tim OConnor
call-forward busy 300
call-forward noan 300 timeout 20
huntstop channel
ephone-dn 14 dual-line
number 205 no-reg primary
pickup-group 1
label 205
description 205
name 205
ephone-dn 15 dual-line
number 206 no-reg primary
pickup-group 1
label 206
description 206
name 206
ephone-dn 16 dual-line
call-waiting ring
number 202 no-reg primary
pickup-group 1
label 202
description Extension 202
name David Holmes
call-forward busy 300
call-forward noan 300 timeout 15
huntstop channel
ephone-dn 17 dual-line
number 208 no-reg primary
label 208
description 208
name 208
ephone-dn 18 dual-line
number 209 no-reg primary
label 209
description 209
name 209
ephone-dn 19 dual-line
number 210 no-reg primary
label 210
description 210
name 210
ephone-dn 43 octo-line
number 771 no-reg primary
conference meetme
preference 3
ephone-dn 44 octo-line
number 771 no-reg primary
conference meetme
preference 2
no huntstop
ephone-dn 45 octo-line
number 771 no-reg primary
conference meetme
preference 1
no huntstop
ephone-dn 46 octo-line
number 771 no-reg primary
conference meetme
no huntstop
ephone-dn 49 octo-line
number C001 no-reg primary
conference ad-hoc
preference 3
ephone-dn 50 octo-line
number C001 no-reg primary
conference ad-hoc
preference 2
no huntstop
ephone-dn 51 octo-line
number C001 no-reg primary
conference ad-hoc
preference 1
no huntstop
ephone-dn 52 octo-line
number C001 no-reg primary
conference ad-hoc
no huntstop
ephone-dn 55
number A801... no-reg primary
mwi off
ephone-dn 56
number A800... no-reg primary
mwi on
ephone 1
device-security-mode none
mac-address 4142.4DB8.0000
ephone-template 16
max-calls-per-button 2
type anl
button 1:5
ephone 2
device-security-mode none
mac-address 4142.4DB8.0001
ephone-template 16
max-calls-per-button 2
type anl
button 1:6
ephone 3
device-security-mode none
mac-address 4142.4DB8.0002
ephone-template 16
max-calls-per-button 2
type anl
button 1:7
ephone 4
device-security-mode none
mac-address 4142.4DB8.0003
ephone-template 16
max-calls-per-button 2
type anl
button 1:8
ephone 5
device-security-mode none
mac-address 0024.97AA.E811
ephone-template 15
max-calls-per-button 2
username "Receptionist" password receptionist
type 7931
button 1:10
--More-- !
ephone 6
device-security-mode none
mac-address 0024.C4FC.4013
ephone-template 16
username "None"
type 7911
button 1:11
ephone 7
device-security-mode none
video
mac-address 000F.34FA.168B
ephone-template 16
username "steve" password petersteve
speed-dial 1 xxx label "Peter - Home"
speed-dial 2 xxx label "David - Mobile"
speed-dial 3 xxx label "Tim - Mobile AUS"
speed-dial 4 xxx label "Tim - Mobile USA"
type 7960
button 1:12
ephone 8
device-security-mode none
video
mac-address A40C.C394.B1F0
ephone-template 16
username "tim" password timoconnor
speed-dial 1 xxx label "David - Mobile"
speed-dial 2 xxx label "Peter - Mobile"
speed-dial 3 xxx label "Clare - Mobile"
type 7911
button 1:13
ephone 9
device-security-mode none
mac-address 0024.C4FC.5425
ephone-template 16
type 7911
button 1:14
ephone 10
device-security-mode none
mac-address 0024.C4FD.E27C
ephone-template 16
type 7911
button 1:15
ephone 11
device-security-mode none
video
mac-address 0007.5098.1AB6
ephone-template 16
username "holmes" password davidholmes
speed-dial 1 xx label "David - Home"
speed-dial 2 xxxl abel "Sue - Mobile"
speed-dial 3 xxx label "Peter - Mobile"
speed-dial 4 xxx label "Tim - Mobile USA"
speed-dial 5 xxx label "Tim - Mobile AUS"
type 7960
button 1:16
ephone-hunt 1 sequential
pilot 501
list 202, 203, 204
final 300
timeout 8, 8, 8
no-reg pilot
statistics collect
description Sales
alias exec cca_vm_notification schedule from_time=00 to_time=24
banner login ^CCisco Configuration Assistant. Version: 3.2 (3). Fri Nov 15 22:54:23 EST 2013^C
line con 0
no modem enable
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0 4
transport input all
line vty 5 100
transport input all
ntp master
end
UC520#

I was configure custom disconnect tone refer to this site:
http://ciscoflair.blogspot.com/2009/05/cisco-fxo-disconnect-issue.html
And the tone is in the attachment, and the custom disconnect tone configuration like below:
voice class custom-cptone Disconnect
dualtone disconnect
frequency 420 420
cadence 251 255 245 250 249 250 250 250
and the port configuration was like below:
voice-port 0/1/2
supervisory disconnect dualtone mid-call
supervisory custom-cptone Disconnect
cptone NL
timeouts interdigit 4
timeouts call-disconnect 5
timeouts wait-release 5
timing hookflash-out 500
connection plar 334
impedance complex2
caller-id enable
caller-id alerting line-reversal
caller-id alerting dsp-pre-allocate
but it was not working and the phone still ringing after the PSTN caller disconnect.
but i was read about "dualtone-detect-params", and i was add the below command and i do not understand it, but it was solve hte problem:
voice class dualtone-detect-params 1
freq-max-deviation 20
cadence-variation 50
so what it is and how to determine this parameters.

UC520 FXO To Auto Attendant Disconnect Problem

We have UC520 with FXO card, and have a problem when we point the inbound call to the Cisco Unity Express Auto Attendant, the problem is if the PSTN caller disconnect, the FXO remain off-hook for along time, and if the PSTN caller dial an extension and then disconnect the phone remain ringing for a long time.
but if we point the inbound call an extention, there is no problem and the phone stop ring when the PSTN caller disconnect.
below is the voice-port, and CUE dial-peer configuration:
voice-port 0/1/2
translate calling 3
compand-type a-law
cptone NL
timeouts interdigit 4
timeouts call-disconnect 5
timeouts wait-release 5
timing hookflash-out 500
connection plar 489
impedance complex2
description LandLine 5105586
caller-id enable
caller-id alerting line-reversal
caller-id alerting dsp-pre-allocate
voice-port 0/1/3
translate calling 3
supervisory disconnect dualtone mid-call
compand-type a-law
cptone NL
timeouts interdigit 4
connection plar 489
impedance complex2
description LandLine 5105388
caller-id enable
caller-id alerting line-reversal
caller-id alerting dsp-pre-allocate
dial-peer voice 499 voip
description VoiceMail
destination-pattern 498
media flow-around
session protocol sipv2
session target ipv4:10.1.10.2
dtmf-relay sip-notify
codec g711ulaw
no vad
so what we can do?

I was configure custom disconnect tone refer to this site:
http://ciscoflair.blogspot.com/2009/05/cisco-fxo-disconnect-issue.html
And the tone is in the attachment, and the custom disconnect tone configuration like below:
voice class custom-cptone Disconnect
dualtone disconnect
frequency 420 420
cadence 251 255 245 250 249 250 250 250
and the port configuration was like below:
voice-port 0/1/2
supervisory disconnect dualtone mid-call
supervisory custom-cptone Disconnect
cptone NL
timeouts interdigit 4
timeouts call-disconnect 5
timeouts wait-release 5
timing hookflash-out 500
connection plar 334
impedance complex2
caller-id enable
caller-id alerting line-reversal
caller-id alerting dsp-pre-allocate
but it was not working and the phone still ringing after the PSTN caller disconnect.
but i was read about "dualtone-detect-params", and i was add the below command and i do not understand it, but it was solve hte problem:
voice class dualtone-detect-params 1
freq-max-deviation 20
cadence-variation 50
so what it is and how to determine this parameters.

Removal of Auto Attendant ....

Hi Gurus,
I am having some problems with the UC 520 namely,
1) Is it possible to remove the auto attendant?
2) I would like when people call in to the main line, it would be diverted to a voice hunt group.
    The voice hunt group has already been configured as show below,
    voice hunt-group 1 sequential
    final 3399
    list 3309,3317,3318,3315
    timeout 10
    pilot 3380

I am not sure what do you mean by E1/T1?
Indeed i am using a DID service.
Here you go,
dial-peer cor custom
name internal
name local
name domestic
name international
name 900
name 976
dial-peer cor list call-internal
member internal
dial-peer cor list call-local
member local
dial-peer cor list call-domestic
member domestic
dial-peer cor list call-international
member international
dial-peer cor list call-900
member 900
dial-peer cor list call-976
member 976
dial-peer cor list user-internal
member internal
dial-peer cor list user-local
member internal
member local
dial-peer cor list user-domestic
member internal
member local
member domestic
dial-peer cor list user-international
member internal
member local
member domestic
member international
dial-peer cor list user900-internal
member internal
member 900
member 976
dial-peer cor list user900-local
member internal
member local
member 900
member 976
dial-peer cor list user900-domestic
member internal
member local
member domestic
member 900
member 976
dial-peer cor list user900-international
member internal
member local
member domestic
member international
member 900
member 976
dial-peer voice 2001 voip
description ** cue auto attendant number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 3398
b2bua
session protocol sipv2
session target ipv4:IP ADDRESS
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 150 pots
description ** incoming dial peer **
translation-profile incoming INCOMING_DID
incoming called-number .%
direct-inward-dial
port 0/3/0:15
dial-peer voice 2000 voip
description ** cue voicemail pilot number **
destination-pattern 3399
b2bua
session protocol sipv2
session target ipv4:IP ADDRESS
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 400 voip
description Office Tele
destination-pattern 4..
voice-class codec 1
session target ipv4:IP ADDRESS
dtmf-relay cisco-rtp
no vad
dial-peer voice 500 voip
description TeleInformatics Voicemail
destination-pattern 5..
session target ipv4:IP ADDRESS
dtmf-relay cisco-rtp
no vad
dial-peer voice 6 voip
description Oilexec
preference 7
destination-pattern 6..
session target ipv4:IP ADDRESS
dtmf-relay cisco-rtp
no vad
dial-peer voice 31 voip
description London Office internal Extensions 31**
destination-pattern 31..
voice-class codec 1
session protocol sipv2
session target ipv4:IP ADDRESS
dtmf-relay sip-notify
dial-peer voice 32 voip
description Jersey Office internal Extensions 32**
destination-pattern 32..
voice-class codec 1
session target ipv4:IP ADDRESS
dtmf-relay cisco-rtp
no vad
dial-peer voice 199 voip
description Aberdeen Reception phone
destination-pattern 199
voice-class codec 2
session protocol sipv2
session target ipv4:IP ADDRESS
dtmf-relay sip-notify
dial-peer voice 151 pots
corlist outgoing call-local
description ** E1 pots dial-peer **
translation-profile outgoing OUTGOING_DID
preference 5
destination-pattern 9[5-9]T
port 0/3/0:15
no sip-register
dial-peer voice 153 pots
corlist outgoing call-international
description ** E1 pots dial-peer **
translation-profile outgoing OUTGOING_DID
preference 5
destination-pattern 9001T
port 0/3/0:15
prefix 001
no sip-register
dial-peer voice 8 voip
description SIP Link to Regent Quay - ABZ Dial-tone
translation-profile outgoing VOIP_ABERDEEN
destination-pattern 8T
voice-class codec 1
session protocol sipv2
session target ipv4:IP ADDRESS
dtmf-relay sip-notify
clid network-number 12345678912
dial-peer voice 201 voip
description C-MAR internal Extensions 2**
destination-pattern 2..
voice-class codec 2
session protocol sipv2
session target ipv4:172.16.0.1
dtmf-relay sip-notify
dial-peer voice 154 pots
corlist outgoing call-international
description ** E1 pots dial-peer **
translation-profile outgoing OUTGOING_DID
destination-pattern 9019T
port 0/3/0:15
prefix 019
no sip-register
dial-peer voice 155 pots
corlist outgoing call-local
description ** E1 pots dial-peer **
translation-profile outgoing OUTGOING_DID
destination-pattern 91800T
port 0/3/0:15
prefix 1800
no sip-register
dial-peer voice 156 pots
corlist outgoing call-local
description ** E1 pots dial-peer **
translation-profile outgoing OUTGOING_DID
preference 5
destination-pattern 9100
port 0/3/0:15
forward-digits 3
no sip-register
dial-peer voice 2002 voip
description ** cue auto attendant number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 3397
b2bua
session protocol sipv2
session target ipv4:10.1.12.1
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 2003 pots
destination-pattern 3301
port 0/0/0
dial-peer voice 10 pots
destination-pattern 3301
port 0/0/0
dial-peer voice 157 pots
description ** FAX 1**
destination-pattern 9012T
port 0/3/0:15
prefix 012
dial-peer voice 158 pots
description ** FAX 2 **
destination-pattern 9013T
port 0/3/0:15
prefix 013
dial-peer voice 159 pots
destination-pattern 916..
port 0/3/0:15
forward-digits 4
dial-peer voice 34 voip
description wellington Office internal Extensions 34**
destination-pattern 34..
voice-class codec 1
session target ipv4:IP ADDRESS
dtmf-relay cisco-rtp
no vad
dial-peer voice 35 voip
description Dubai Office internal Extensions 35**
destination-pattern 35..
session target ipv4:IP ADDRESS
dtmf-relay cisco-rtp
no vad
dial-peer voice 37 voip
description Mumbai Office internal Extensions 37**
destination-pattern 37..
voice-class codec 1
session target ipv4:IP ADDRESS
dtmf-relay h245-alphanumeric
no vad
dial-peer voice 30 voip
description Houston Office internal Extensions 30**
destination-pattern 30..
voice-class codec 1
session target ipv4:IP ADDRESS
dtmf-relay cisco-rtp
no vad
dial-peer voice 38 voip
description Brasil Office internal Extensions 38**
destination-pattern 38..
session target ipv4:IP ADDRESS
dtmf-relay cisco-rtp
codec g711ulaw
no vad
no dial-peer outbound status-check pots
sip-ua
registrar ipv4:172.16.3.1 expires 3600

SRST Auto Attendent

Hello,
I followed the below procedure to setup auto attendent during SRST.
http://angryciscoguy.com/jello/auto-attendant-on-srstcme-gateway-without-cue/
Can anyone help with the audio files. Is there any place where I can get the suitable audio files.
Thanks in advance
Ajey Shetty

Hi.
You can record your prompts and than convert them in au format with many converters available online.
Itunes can also do that.
HTH
Regards
Carlo
Sent from Cisco Technical Support iPhone App

Turn Auto Attendant into Night Mode Manually

I have set an auto attendant to automatically play the day and night mode based on business hours on Unity Connection with CUCM 8.0. But client wants to turn on the night mode manually when the receptionist is leaving before the closing hour, and turn off the night when come in early. And they still want to play the day greeting during normal business hours. Which option available in Unity Connection that can handle this. I can set up night mode manually ok, but will lose out the day greeting. How can I achieve this with both day and night greeting.
Thanks.
Dat Pham

Configure a separate call handler and have the recepcionist set CFA for this.
All she needs to turn this off/on is to set CFA to a predefined DN.
CUC can only work based on pre-defined schedules.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

CUCM 8.0 as auto attendant

Hi all experts.
Can i use CUCM 8.0 as auto attendant also ? does it provides AA service ?

HI,
The supported HW (HW compatibility matrix) can be found on CCO:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
The later versions of Cisco Unified Contact Center Express can be deployed as an application on a virtual machine on the VMWare platform running on the Cisco Unified Computing System (UCS) hardware.
This allows Cisco Unified Contact Center Express to be part of a virtualized deployment where multiple Cisco Unified Communications applications can be deployed on the same server.
Only UCS for now.
Kurt

CUE Auto Attendant Sample Script into French

Hello,
I'm looking forward a sample script into french (with audio also in french) for Auto Attendant application.
Thanks in advance,
A. Delrue

Hi Markus. Thanks a lot i did not think about this subflow !
I have a warning when associating the script to the application: "Warning: Application created successfully, but might not be fully functional due to internal errors"
And application is not working... Traces on CUE showing:
28375 03/01 10:24:06.463 ACCN APMG 0 UNABLE_INVOKE_APP:Unable to invoke application: Application=App[name=fermeture,type=Cisco Script Application,id=6,desc=fermeture,enabled=true,max=4,valid=false,cfg=[ApplicationConfig[,name=fermeture,id=6,type=Cisco Script Application.description=fermeture,enabled=true,sessions=4,script=SCRIPT[playgreetingxfermbx.aef],access=4,privilege=1,script=SCRIPT[playgreetingxfermbx.aef]]]],Exception=com.cisco.app.InvalidApplicationException: failed to load script; nested exception is:
        com.cisco.script.InvalidScriptException: invalid script: playgreetingxfermbx.aef; error in Play Prompt is: Play Prompt: Invalid Prompt: com.cisco.expression.EmptyExpressionException: no formula entered (line: 1, col: 1); nested exception is:
        com.cisco.expression.EmptyExpressionException: no formula entered (line: 1, col: 1); nested exception is:
        com.cisco.wfapi.WFInvalidWorkflowException: invalid script: playgreetingxfermbx.aef; error in Play Prompt is: Play Prompt: Invalid Prompt: com.cisco.expression.EmptyExpressionException: no formula entered (line: 1, col: 1); nested exception is:
        com.cisco.expression.EmptyExpressionException: no formula entered (line: 1, col: 1)
Any idea ?
Thanks a lot, Julien.

Cisco 2801 Question

I'm trying to open a port in a Cisco 2801, the port 3001 to give internet access for a cisco switch which IP is 172.16.8.40
thanks in advance
cisco 2801 config
match access-group 110
class-map type inspect match-all vpn-traffic
match access-group 111
policy-map type inspect priv-pub-pmap
class type inspect all-private
inspect
class class-default
drop
policy-map type inspect pub-priv-pmap
class type inspect vpn-traffic
inspect
class class-default
drop
zone security private
zone security public
zone-pair security priv-pub source private destination public
service-policy type inspect priv-pub-pmap
zone-pair security pub-priv source public destination private
service-policy type inspect pub-priv-pmap
crypto isakmp policy 1
encr aes 256
authentication pre-share
group 2
lifetime 84600
crypto isakmp policy 5
encr 3des
hash md5
authentication pre-share
group 2
lifetime 84600
crypto isakmp client configuration group BFvpn
key vPnBr1TT@ny9687!
dns 192.168.2.10
pool vpn_ip
acl remotevpn
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set aes-256-sha esp-aes 256 esp-sha-hmac
crypto dynamic-map vpn 65535
set transform-set ESP-3DES-MD5
crypto map vpn client authentication list AAA-VPN
crypto map vpn isakmp authorization list AAA-VPN
crypto map vpn client configuration address respond
crypto map vpn 65535 ipsec-isakmp dynamic vpn
interface FastEthernet0/0
ip address 75.150.67.105 255.255.255.252
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly in
zone-member security public
duplex auto
speed auto
crypto map vpn
interface FastEthernet0/1
ip address 172.16.250.1 255.255.255.252
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip virtual-reassembly in
zone-member security private
speed 100
full-duplex
interface FastEthernet0/3/0
switchport mode trunk
no ip address
interface FastEthernet0/3/1
no ip address
interface FastEthernet0/3/2
no ip address
interface FastEthernet0/3/3
no ip address
interface Vlan1
no ip address
interface Vlan413
ip address 170.163.128.202 255.255.255.252
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly in
zone-member security public
router eigrp 1
network 172.16.0.0
ip local policy route-map LocalPBR
ip local pool vpn_ip 172.16.251.10 172.16.251.20
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source static tcp 172.16.8.40 3001 172.16.250.1 3001
ip nat inside source route-map NAT-HFC interface FastEthernet0/0 overload
ip nat inside source route-map NAT-OPT interface Vlan413 overload
ip route 0.0.0.0 0.0.0.0 75.150.67.106 track 3
ip route 0.0.0.0 0.0.0.0 170.163.128.201 5
ip access-list standard remotevpn
permit 172.16.0.0 0.15.255.255
ip sla 1
icmp-echo 75.150.67.106 source-interface FastEthernet0/0
frequency 30
ip sla schedule 1 life forever start-time now
ip sla 2
icmp-echo 170.163.128.201 source-interface Vlan413
frequency 30
ip sla schedule 2 life forever start-time now
access-list 1 permit 170.163.0.0 0.0.255.255
access-list 1 remark for Telnet & SNMP Restrictions
access-list 1 permit 172.16.8.0 0.0.3.255
access-list 7 permit 172.16.8.40
access-list 7 permit 172.16.8.41
access-list 7 permit 172.16.8.42
access-list 7 permit 172.16.8.43
access-list 10 permit 75.150.67.105
access-list 20 permit 170.163.128.202
access-list 102 deny   ip any 10.0.0.0 0.255.255.255
access-list 102 deny   ip any 172.16.0.0 0.15.255.255
access-list 102 deny   ip any 192.168.0.0 0.0.255.255
access-list 102 permit ip 172.16.0.0 0.0.15.255 any
access-list 102 permit ip 172.16.0.0 0.15.255.255 any
access-list 110 permit ip any any
access-list 111 permit ip 172.16.251.0 0.0.0.255 172.16.0.0 0.15.255.255
access-list 111 deny   ip any any
route-map LocalPBR permit 10
match ip address 10
set ip default next-hop 75.150.67.106
route-map LocalPBR permit 20
match ip address 20
set ip default next-hop 170.163.128.201
route-map NAT-HFC permit 10
match ip address 102
match interface FastEthernet0/0
route-map NAT-OPT permit 10
match ip address 102
match interface Vlan413
snmp-server community chimenet#3000 RO 1
snmp-server enable traps tty
tacacs-server host 170.163.248.63
tacacs-server host 170.163.248.64
tacacs-server directed-request
tacacs-server key 7 06050728414B071C1154405B5C54

Hello Jherrera,
Trust you are doing great.
Could you please additionally configure "ip nat outside" under interface Fastethernet 0/1 and "ip nat inside" under interface vlan 413 and interface fa 0/0 and check if the its working.
Regards,
Mohit
**Please rate if you find this post helpfull

VPN between RV042 and Cisco 2801

HI
Kindly help me out. I'm configuring a p2p vpn between a cisco 2801 with IOS 12.3 and a linksys RV042. I'm getting following error on Linksys and Cisco respectively.
[Tunnel Negotiation Info] >>> Initiator Send Main Mode 1st packet
Dec 19 02:40:42 2011
     VPN Log
    Received informational payload, type NO_PROPOSAL_CHOSEN
dst             src             state               conn-id     slot    status
x.x.x.x       x.x.x.x   MM_NO_STATE          0        0       ACTIVE
Below are my config:
Linksys RV042:
Keying Mode: IKE with Preshared Key
Phase1 DH Group: Group2
Phase1 Encryption: 3DES
Phase1 Authentication: MD5
Phase1 SA Life Time: 28800
Perfect forward secrecy : enabled
Phase2 DH Group: Group2
Phase2 Encryption: 3DES
Phase2 Authentication: MD5
Phase2 SA Life Time: 28800
Preshared Key: xxxxxx
Cisco 2801:
crypto isakmp policy 11
encr 3des
authentication pre-share
group 2
lifetime 28800
crypto isakmp key xxxxxx address xxxxxx
no crypto isakmp ccm
crypto ipsec transform-set STRONGER esp-3des esp-md5-hmac
crypto map myvpn 10 ipsec-isakmp
set peer xxxxxx
set transform-set STRONGER
set pfs group2
match address 103
interface FastEthernet0/0
ip address 10.0.0.56 255.255.255.0
ip nat inside
ip virtual-reassembly
no ip route-cache
duplex auto
speed auto
no mop enabled
interface FastEthernet0/1
ip address xxxx xxxx
ip nat outside
ip virtual-reassembly
no ip route-cache
duplex auto
speed auto
crypto map myvpn
ip nat pool branch xxxxxx xxxxx netmask 255.255.255.240
ip nat inside source route-map nonat pool branch overload
access-list 103 permit ip 10.0.0.0 0.0.0.255 192.168.2.0 0.0.0.255
access-list 110 deny   ip 10.0.0.0 0.0.0.255 192.168.2.0 0.0.0.255
access-list 110 permit ip 10.0.0.0 0.0.0.255 any
snmp-server community public RO
route-map nonat permit 10
match ip address 110
Rgards
SAM

Hi,
It looks like you are using the default hash for the crypto isakmp policy and that your connection is failing on the phase 1 negotiation. The default hash on the crypto isakmp policy is sha. On the 2801 try adding hash md5.
crypto isakmp policy 11
encr 3des
hash md5
authentication pre-share
group 2
lifetime 28800
Let me know if that helps.
Thank you,
Jason NIckle

Cisco 2801 Auto Attendant

Similar Messages

Maybe you are looking for