J_security_check fails on fwd fro another server ?

Hey guys...
I am using WLS70sp1
I have in production a iplanet webserver
When the users directly come to the webserver , they see the login page and can
login.
But if they come to another URL, which just redirects to the webserver they can
see the login page but when they try to login with username/password , it fails
with ".....j_security_check" in the URL.
Any clue whatz missing if the request gets redirected from another server ?
Thanx,
Krish

>
I have in production a iplanet webserver
When the users directly come to the webserver , they see the login pageand can
login.
But if they come to another URL, which just redirects to the webserverthey can
see the login page but when they try to login with username/password , itfails
with ".....j_security_check" in the URL.I believe that Servlet 2.3 explicitly prohibits this action. From section
12.5.3
In order for the authentication to proceed appropriately,
the action of the login form must
always be 'j_security_check'. This restriction is made
so that the login form will always work no matter what the resource is
that
requests it and avoids requiring that the server to process the outbound
form to correct the action field.
So you can not cannot forward/redirect a request to j_security_check.
-utpal

Similar Messages

J_Security_check fails on fwd from another IP ?

          Hey guys...
          I am using WLS70sp1
          I have in production a iplanet webserver
          When the users directly come to the webserver , they see the login page and can
          login.
          But if they come to another URL, which just redirects to the webserver they can
          see the login page but when they try to login with username/password , it fails
          with ".....j_security_check" in the URL.
          Any clue whatz missing if the request gets redirected from another server ?
          Thanx,
          Krish


>
I have in production a iplanet webserver
When the users directly come to the webserver , they see the login pageand can
login.
But if they come to another URL, which just redirects to the webserverthey can
see the login page but when they try to login with username/password , itfails
with ".....j_security_check" in the URL.I believe that Servlet 2.3 explicitly prohibits this action. From section
12.5.3
In order for the authentication to proceed appropriately,
the action of the login form must
always be 'j_security_check'. This restriction is made
so that the login form will always work no matter what the resource is
that
requests it and avoids requiring that the server to process the outbound
form to correct the action field.
So you can not cannot forward/redirect a request to j_security_check.
-utpal

My emails are sitting in outbox, message server failed should choose another server but doesn't.?

I opened another email Yahoo- too when i bought iPad, don't use it much because when I sent an emails in the last few days it goes into Outbox and I receive a message STMP server failed but when I go into Settings it does not look for another server as its supposed to do.
Any help is appreciated, thank you.

Yahoo's servers have been having problems this week. Try again tomorrow.

Generating pdf using ADS on another Server failed

Hi there,
I am trying to generate a pdf-document using Adobe Document Services installed on another server.
It's a Visual Composer app, which opens a Web Dynpro component to generate the pdf. Everything works fine when I run the app on a server, which has Adobe Document Services installed.
But when I try to run the app on a server without ADS installed and want to use ADS on another server (both NW 7.3 SPS4) it fails with and FileNotFoundException.
The log of the ADS-Server says, that it cannot found the file located in <PATH TO THE XDP-FILE ON THE APP-SERVER>. It's sure, that the server cannot find the file, because it's not deployed there!
It seems that the Application calls the Adobe-System which trys to find the template on its own file-system.
Does anybody know the mistake here?
Any help would be greatly appreciated
Edited by: Bernd Speckmann on Oct 17, 2011 10:31 AM

The problem was, that I was passing xdp template source as url .
Instead I should send it as a stream using the appropriate pdfdocument api.

Iscsitarget installation fails on Windows 2008 R2 server

Dear All
We have windows 2008 Server which is also DC server. I am trying to install iscsitarget utility which I downloaded from Microsoft site. I want to configure the server as iscsi target and map the disk space to another server as disk volume.
The installation fails as it says ' due to some error' there is no explicit entry in the event viewer also. The iscsitarget is version 3.3.
We have installed all the applicable updates from Microsoft updates. ANy alternatives are available?
Shekhar-nsk

Hi,
Follow your description, I also download Microsoft iSCSI Software Target 3.3 on my Windows Server 2008 R2 and
install it. However, it succeed.
àThe installation
fails as it says ' due to some error'
Would you please let me know the complete error message that you can get? Or provide a screenshot of it?
(please hide all protected or private information.)
Meanwhile, would you please let me know where you download the Microsoft iSCSI Software Target 3.3? Please
download it from following link and
perform a clean boot, then check if install successfully in clean boot.
Microsoft iSCSI Software Target 3.3
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to transport a custom bapi (written by me) to another server

Hello friends,
We have a software that is integrated with SAP. To make our software work with SAP, we have some custom bapis created on SAP side. We would like to transfer them to another server that is on a different network. After reading many documents and forums here is the what I have done and the problem that I am facing. Your help will be highly appreciated.
1.Started Transaction 'SE80'.
2.Created a test package called 'ZTRANSPORTTEST'.
3.Created a function group called 'ZTRANSPORTTESTFN' under that package.
4.Created a function module under the group called 'ZTRANSFUNCTION'
NOTE: Just saved and activated without adding any code since I won't be using this function
             for anything other than to test the Transport Feature.
5. Clicked on the button that said 'Transport Organizer' and saw the list of requests including the
    EC1K900083one that I just created.
6. I tried to release it by 'RIGHT CLICKING'
   It waited for few seconds with the message....."code inspector checks running.".
   Then it failed with an error message as follows
   Error in pre-export methods for request EC1K900083
NOTE: I have made sure that everything is activated properly, since I read on a forum that this
             error may occur if something is not activated properly. So I have done this step over
             and over again making sure that everything is activated properly.
7. I then started Transaction 'SE09' and saw the request 'EC1K900083' under the released tree with a 'CHECK' Mark.
However, when I sent to /usr/SAP/trans/data and /usr/SAP/trans/Cofiles, I didn't find the transport data there.
Has anyone done this before and if so what am I doing wrong? Your suggestions or feedback will be highly appreciated.
Thanks
Ram

Hello Friends,
Thanks for all the responses. I got the following response from SAP TECH SUPPORT which is not very encouraging and so I am just closing this.
Thanks
Ram
===========================================================================
30.04.2009 - 11:40:29 EST - Reply by SAP
Dear Mr Ram,
Thanks for explaining it once again.
The package is just container for development objects that belong together, in that they share the same system, transport layer, and
customer delivery status. Please check the below link http://help.sap.com/saphelp_nw70/helpdata/en/ea/c05da3f01011d3964000a0c94260a5/frameset.htm
As I understand correctly you want to 'export' your development outside of your SAP system domain. For that either you can do it using 'Externalsystems'. 'External systems' are a special form of virtual systems. A real SAP System is used in their place to perform actions on the transport directory. They are different from virtual systems in that they have their own transport directory that you can freely choose, you can use external systems to:
-Write transport requests to exchangeable data media
-Read transport requests from exchangeable data media
-Send transports to other transport domains using an intermediate directory
-Send transports to other transport domains using an intermediate directory
If you want to transport between systems in different domains, we recommend that you link domains with 'domain links'. There must be a
permanent network connection between the systems in the two domains, similar to the connection between systems within the same domain.
I would recommend to take a look in the documentation available in SAP Online help for further information on how to setup this
complex transport landscape. I hope this information helps you to setup the transport system.
Or you simply create a transport request of type 'transport of copy' and input target system and client (which you should know) system as
target system include the objects (bapi) in the request. This ensure that requests will only be imported into that system. Other systems willnot be touched.
'Transport of copies' type transports do not get automatically added to the next buffer after they have been imported into a system. When creating a 'Transport of copies' transport the target system must be specified as this type of transport does not respect the defined transport routes outlined in TMS.
You can use this request type to transport objects to a specified SAP System using Transports of copies. The objects are transported with the version they have in the current SAP System. The original location of the objects remains unchanged. There is no delivery to another SAP System.
But we at AGS we cannot suggest, as the nature of your request indicates this is a consulting issue rather than a software error.
Customer Support's charter, under the SAP maintenance agreement, is to handle software or system defects in the standard delivered R/3 product. Please refer the note 1054121.
So you have to seek assistance from SAP's Remote Consulting Service which is billable.
I am sorry that I could not give you more positive reply in this case.
With warm regards,
Sajiv
Active Global Support - Technology
=========================================================================

[svn] 3722: Bug: BLZ-260 - Error message for a legacy =3. 0 client poll failing against a =3.1 server is unclear

Revision: 3722
Author: [email protected]
Date: 2008-10-17 14:04:59 -0700 (Fri, 17 Oct 2008)
Log Message:
Bug: BLZ-260 - Error message for a legacy <=3.0 client poll failing against a >=3.1 server is unclear
QA: Yes
Doc: No
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-260
Modified Paths:
blazeds/trunk/modules/common/src/flex/messaging/errors.properties
blazeds/trunk/modules/core/src/flex/messaging/FlexSession.java
blazeds/trunk/modules/core/src/flex/messaging/client/FlexClient.java

your problem:
Missing class: oracle.tip.adapter.jms.JmsManagedConnectionFactory
Dependent class: oracle.tip.adapter.fw.wsdl.WSDLUtils
Loader: oracle.bpel.common:10.1.3
Code-Source: /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/bpel/lib/orabpel.jar
Configuration: <code-source> in /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/j2ee/home/config/server.xml
It happens when server is custom installed, try to reinstall it as full version and problem should disappear otherwise your need another full installation to retrieve and replace orabpel.jar file from (or maybe more)

Error while duplicate database from one server to another server

Hi there,
I am practicing duplicate database from one single database server to another server. Hardware and driver path on 2 machines is the same. Here are my steps:
--------------------- Clone site:
1. modify listener.ora with content:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = orcl)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
(SID_NAME= orcl)
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON
2. stop and start listener again, message show like :
Service “orcl” has 1 instance(s).
Instance “orcl”, status UNKNOWN, has 1 handler(s) for this service…
The command completed successfully
3. create pfile from spfile.
4. shutdown and startup nomount with pfile is new pfile create from step 3.
--------------------------------------- Source site
1. modify tnsnames.ora with content like:
VVCOREDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = vvcoredb)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = 10.254.1.235) (PORT=1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
2. run command from rman like these:
rman> connect target sys@vvcoredb
rman> target database Password:
rman> connect auxiliary sys@orcl
rman> auxiliary database Password:
rman> DUPLICATE TARGET DATABASE to orcl from active database spfile nofilenamecheck;
Then the result show below:
Starting Duplicate Db at 24-SEP-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=63 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/db_1/dbs/spfilevvcoredb.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''";
executing Memory Script
Starting backup at 24-SEP-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=74 device type=DISK
Finished backup at 24-SEP-12
sql statement: alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''
contents of Memory Script:
sql clone "alter system set db_name =
''ORCL'' comment=
''duplicate'' scope=spfile";
shutdown clone immediate;
startup clone nomount;
executing Memory Script
sql statement: alter system set db_name = ''ORCL'' comment= ''duplicate'' scope=spfile
Oracle instance shut down
connected to auxiliary database (not started)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/24/2012 17:44:12
RMAN-03015: error occurred in stored script Memory Script
RMAN-04014: startup failed: ORA-01261: Parameter db_recovery_file_dest destination string cannot be translated
ORA-01262: Stat failed on a file destination directory
Linux-x86_64 Error: 2: No such file or directory
I don't know what wrong with my pfile? I specify correct my pfile on clone site like this:
orcl.__db_cache_size=1476395008
orcl.__java_pool_size=16777216
orcl.__large_pool_size=16777216
orcl.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=1342177280
orcl.__sga_target=1979711488
orcl.__shared_io_pool_size=0
orcl.__shared_pool_size=436207616
orcl.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/orcl/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u01/app/oracle/oradata/orcl/control01.ctl','/u01/app/oracle/flash_recovery_area/orcl/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_name='orcl'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area/vvcoredb'
*.db_recovery_file_dest_size=4070572032
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=orclXDB)'
*.memory_target=3313500160
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.undo_tablespace='UNDOTBS1'
Please suggest me do i miss some steps when try to duplicate database?
Any suggestions are welcome.
Thanks in advance!
P/s: Sorry for my bad English.

Oh god, it worked. Thank you. But i got another problem like this:
duplicate target database to orcl from active database spfile set "db_recovery_file_dest" = "/u01/app/oracle/flash_recovery_area/vvcoredb" nofilenamecheck;
Starting Duplicate Db at 24-SEP-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=63 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/db_1/dbs/spfilevvcoredb.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''";
executing Memory Script
Starting backup at 24-SEP-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=74 device type=DISK
Finished backup at 24-SEP-12
sql statement: alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''
contents of Memory Script:
sql clone "alter system set db_name =
''ORCL'' comment=
''duplicate'' scope=spfile";
sql clone "alter system set db_recovery_file_dest =
''/u01/app/oracle/flash_recovery_area/vvcoredb'' comment=
'''' scope=spfile";
shutdown clone immediate;
startup clone nomount;
executing Memory Script
sql statement: alter system set db_name = ''ORCL'' comment= ''duplicate'' scope=spfile
sql statement: alter system set db_recovery_file_dest = ''/u01/app/oracle/flash_recovery_area/vvcoredb'' comment= '''' scope=spfile
Oracle instance shut down
connected to auxiliary database (not started)
Oracle instance started
Total System Global Area 3307048960 bytes
Fixed Size 2217872 bytes
Variable Size 1811941488 bytes
Database Buffers 1476395008 bytes
Redo Buffers 16494592 bytes
contents of Memory Script:
sql clone "alter system set db_name =
''VVCOREDB'' comment=
''Modified by RMAN duplicate'' scope=spfile";
sql clone "alter system set db_unique_name =
''ORCL'' comment=
''Modified by RMAN duplicate'' scope=spfile";
shutdown clone immediate;
startup clone force nomount
backup as copy current controlfile auxiliary format '/u01/app/oracle/oradata/vvcoredb/control01.ctl';
restore clone controlfile to '/u01/app/oracle/recovery_area/vvcoredb/control02.ctl' from
'/u01/app/oracle/oradata/vvcoredb/control01.ctl';
alter clone database mount;
executing Memory Script
sql statement: alter system set db_name = ''VVCOREDB'' comment= ''Modified by RMAN duplicate'' scope=spfile
sql statement: alter system set db_unique_name = ''ORCL'' comment= ''Modified by RMAN duplicate'' scope=spfile
Oracle instance shut down
Oracle instance started
Total System Global Area 3307048960 bytes
Fixed Size 2217872 bytes
Variable Size 1811941488 bytes
Database Buffers 1476395008 bytes
Redo Buffers 16494592 bytes
Starting backup at 24-SEP-12
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile copy
copying current control file
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/24/2012 18:42:09
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 09/24/2012 18:42:09
ORA-17628: Oracle error 19505 returned by remote Oracle server
I have a comment that source site doesn't have flash_recovery_area, instead it's name is recovery_area, is it problem?
Edited by: 788420 on Sep 24, 2012 4:44 AM

There was an error while writing data back to the server: Failed to commit objects to server : Duplicate object name in the same folder.

Post Author: dmface15
CA Forum: Administration
I am working in a new enviorment and i am trying to save a report to the Crystal Server via the CMC. I am uploading the report from the objects tab and attempting to save to a folder. The report has 1 static defined parameter and that's it. When i click submit to save the report i receive the following error message: "There was an error while writing data back to the server: Failed to commit objects to server : Duplicate object name in the same folder." There is not a anothe report within the folder with that name. What could be causing this error message and equally important, what is the solution.

hte message you received about duplicate user probably means something hadn't fully updated yet. Once it did then it worked...
Regards,
Tim

Essbase Product Existence Check Fails against the Shared Services Server

Hello Everyone,
I am a new to Essbase
When I am launching the EAS web console and trying to log in, its giving me an error saying "Could not connect to Administration Server".
I looked in ESSBASE log file its showing an error 1051429 : "Essbase Product Existence Check Fails against the Shared Services Server with Error []"
This error actually started when I copied an Essbase Application from one of my computers to another computer. All I simply did is copied the application folder into "app" folder. I am not sure if migration
is possible just by copying and pasting the application folders. I am not sure if doing this messed up security with shared services. Also under c:\hyperion\essbase folder I see another text file named "SharedServices_Security_Client".
Its log for today is below:
2011-11-03 19:36:15,375 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 19:36:15,531 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 19:36:15,531 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 19:36:15,531 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 19:36:18,531 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 19:36:45,531 ERROR [main] 20:1092:Failed to initialize EPM System registry. [Root Cause: hyperion.jdbc.base.BaseSQLException: [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: chandan:1433. Reason: Connection refused: connect ] com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 19:36:45,531 ERROR [main] Arguments: param1={}, param2=null, param3=C:\Hyperion\logs\essbase\, com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 19:36:45,531 INFO [main] CSS system intialization failed. : [44156 ms] com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 19:44:14,765 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 19:44:14,781 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 19:44:14,781 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 19:44:14,781 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 19:44:14,828 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 19:44:16,265 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 19:44:16,796 INFO [main] Got hub location from Registry:http://chandan:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
2011-11-03 19:44:16,953 INFO [main] Got native directory location from Registry:chandan:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
2011-11-03 19:44:16,953 INFO [main] URL constructed out of values in Registry database:ldap://chandan:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
2011-11-03 20:02:47,687 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:02:47,859 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:02:47,859 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:02:47,859 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 20:02:48,328 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:03:08,921 ERROR [main] 20:1092:Failed to initialize EPM System registry. [Root Cause: hyperion.jdbc.base.BaseSQLException: [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: chandan:1433. Reason: Connection refused: connect ] com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:03:08,921 ERROR [main] Arguments: param1={}, param2=null, param3=C:\Hyperion\logs\essbase\, com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:03:08,921 INFO [main] CSS system intialization failed. : [63140 ms] com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:05:37,343 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:05:37,343 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:05:37,343 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:05:37,343 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 20:05:37,390 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:05:49,875 ERROR [main] 20:1092:Failed to initialize EPM System registry. [Root Cause: hyperion.jdbc.base.BaseSQLException: [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: chandan:1433. Reason: Connection refused: connect ] com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:05:49,875 ERROR [main] Arguments: param1={}, param2=null, param3=C:\Hyperion\logs\essbase\, com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:05:49,875 INFO [main] CSS system intialization failed. : [12625 ms] com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:06:42,859 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:06:42,859 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:06:42,859 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:06:42,859 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 20:06:42,890 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:06:45,359 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:06:47,218 INFO [main] Got hub location from Registry:http://chandan:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
2011-11-03 20:06:48,250 INFO [main] Got native directory location from Registry:chandan:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
2011-11-03 20:06:48,265 INFO [main] URL constructed out of values in Registry database:ldap://chandan:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
2011-11-03 20:07:17,359 ERROR [main] 80:6007:Failed to load SAP certificate from keystore at SAP.keystore. Ignore if SAP provider is not configured.[Root Cause: Invalid keystore format ] com.hyperion.css.SAPSecurity.loadSAPCertificate(Unknown Source)
2011-11-03 20:10:12,937 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:10:12,937 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:10:12,937 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:10:12,937 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 20:10:13,000 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:10:14,265 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:10:14,671 INFO [main] Got hub location from Registry:http://chandan:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
2011-11-03 20:10:14,812 INFO [main] Got native directory location from Registry:chandan:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
2011-11-03 20:10:14,812 INFO [main] URL constructed out of values in Registry database:ldap://chandan:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
2011-11-03 20:10:15,234 ERROR [main] 80:6007:Failed to load SAP certificate from keystore at SAP.keystore. Ignore if SAP provider is not configured.[Root Cause: Invalid keystore format ] com.hyperion.css.SAPSecurity.loadSAPCertificate(Unknown Source)
I dont know how to resolve this.
Please Help
Thank you

From the log
Error establishing socket to host and port: chandan:1433. Reason: Connection refused: connect
The SQL server itself is not running or TCP/IP is disabled. That can be confirmed by runing netstat and see it is listed there.
Then run telnet chandan 1433 and see it can connect
To enable the TCP refer to this link
Re: error establishing socket to host and port: EPM11:1433

Failed to load resource: the server responded with a status of 404 (Not Found)

I uploaded 2 x small Wordpress sites to Azure this morning using the local Git repository on my iMac. They worked fine when I checked them earlier and now I see the websites are not loading correctly with 30+ errors on each effecting all .css, .js and
.jpg files - using view source, these are the error messages.
Failed to load resource: the server responded with a status of 404 (Not Found)
When I open the web root in my ftp client the files are definitely there as you would expect. I am using Azure Small Basic Hosting, any thoughts on what has gone wrong and how to fix the websites?
Site 1: http://goo.gl/VONbHc
Site 2: http://goo.gl/wdTP67
Liam

Hi,
I tested your site 1, when I open http://goo.gl/VONbHc, it direct me to
http://templestudios.azurewebsites.net/ ,so I think you create templestudios as your azure website name. it seems that the page will go directory to another page, one image html code as below.
<img width="300" height="225" title="Portrait Photography" class="thumb wp-post-image" alt="Portrait Photography" src="http://www.photostudio.ie/wp-content/uploads/portrait-girl-dublin-300x225.jpg">
The image was not found seems more relate to
http://www.photostudio.ie , I open this site, contents are as following screenshot.
Hope this helps
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Loader will load images from another server, but then we get error on Bitmap operation

I'm developing an app that currently is using Loader to get images from another server. This shouldn't currently work since we are still waiting for the owner of that server to put a crossdomain file in place. However, it does work -- sort of .
Loader can load the images fine, without an error. But then the app has a feature in which we are making a larger duplicate of the image to display in a sidebar, we do this in this manner:
var myBitmap:Bitmap = Bitmap(loader.content);
and when this runs we get a Flash player security error 2122, sandbox violation.
So while I'm hoping all this will fix itself when the crossdomain.xml file is put in place, I'm confused as to why we only get the sandbox error when we make a Bitmap from the image, and not when we initially try to retrieve the image.
(Incidentally: is there a better way to make a "copy" of an image loaded by a Loader, and then change its width and height for simultaneous display in another part of the stage? I don't need to change its actual dimensions -- I just need to change its display width and height.)
Thanks!

The sandbox allows viewing, not editing from another server without a crossdomain.
So, when you try to load it up, it loads it, but "read-only" and gives you an error when you try to "edit" it by making a new Bitmap out of it.
This should resolve itself once that crossdomain is in place.
||EDIT||
I just realized I should clarify my statement a little more.
When you load images from another server without a crossdomain, it allows the load for display only. When you try to load data, it will fail. This is because, XML data, or some other type of data is editable by default, and images are only viewable by default. So, the image fails when you try to convert it into an editable form.

Bare metal restore of full server backup fails with RPC error 0x800706BA (server 2012)

With Windows Server 2012, after creating a successful windows server backup (full server), I am unable to do a bare metal restore of the system.
EFI System Partition, C:, D: are the volumes on a single array (Raid 5).
Loading WinRE and launching re-image, the full server restore stops after completing the C: restore just after beginning the D: drive restore (data volume) with the error with the message about RPC error 0x800706BA, unavailable.
The system will not boot as a result of the failure.
What may be causing this?
[edit]
I think I have two things working against me here... one, Volume Shadow Copy service wasn't running in WinPE and two.. the D: volume contains data deduplication.
I think this is causing some of my problems.
Is there an additional service that I need to start in WinPE to get a volume that was deduplicated restored perhaps using wbadmin?

Hi,
Thanks for the reply Shaon.
The hardware system is identical; however, I am increasing storage capacity from 12TB to 16TB. Basically, the system is the same, just new hard drives (4x4TB versus 4x3TB). Drives are all identical enterprise class drives and I am actually using
the same system (backup, swap drives then restore).
I tried both using the WinRE restore (re-image) with the backup set, and tried using wbadmin. Both produce same RPC unavailable messages (although using the GUI based tool via WinRE provides the additional error code #).
I do not have any idea what to look at to try to figure this one out.
[edit]
I was just informed of this posting:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/147efccc-e0e9-4458-852e-c3a44ae5cb64/the-system-image-restore-failed-error-details-he-rpc-server-is-unavailable-0x800706ba?forum=windowsbackup
and in my case, this lab server does in fact act also as a DC as well as a file server... do I need to spin up a secondary controller (perhaps in a VM on another machine) to do this restore?

SSIS 2008 R2 - Export data to Flat File in another server

Hello Everybody,
I'm trying to export data from a table in database server to flat file in another server, however it is happening the error Access Denied. I'm using SQL Server Integration Service 2008 R2 to do this.
I've checked all the ways that's happening could the level of security and could not resolve.
Please could someone tell me what I'm missing in this case?
Following error log:
SSIS package "AtualizarDados.dtsx" starting.
Information: 0x4004300A at Gerar arquivo, SSIS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Gerar arquivo, SSIS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Gerar arquivo, SSIS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Gerar arquivo, Geração de Arquivo [63]: The processing of file "\\targetserver\Export_File\Export_File.txt" has started.
Warning: 0x80070005 at Gerar arquivo, Geração de Arquivo [63]: Access is denied.
Error: 0xC020200E at Gerar arquivo, Geração de Arquivo [63]: Cannot open the datafile "\\targetserver\Export_File\Export_File.txt".
Error: 0xC004701A at Gerar arquivo, SSIS.Pipeline: component "Geração de Arquivo" (63) failed the pre-execute phase and returned error code 0xC020200E.
Information: 0x40043008 at Gerar arquivo, SSIS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Gerar arquivo para DMZ, Geração de Arquivo [63]: The processing of file "\\targetserver\Export_File\Export_File.txt" has ended.
Information: 0x4004300B at Gerar arquivo, SSIS.Pipeline: "component "Geração de Arquivo" (63)" wrote 0 rows.
Information: 0x40043009 at Gerar arquivo, SSIS.Pipeline: Cleanup phase is beginning.
Task failed: Gerar arquivo
SSIS package "AtualizarDados.dtsx" finished: Success.
Regards,
Antonio Estima

I got after using domain user.
Thanks to all

Fatal Error: Failed to connect to DDE server

I've read the other posts about this problem, but none seem to fit my situation.
This happened while trying to use a 3rd party program Typhoon AutoRun to test autorun files for CDs of our Ebooks that we're burning. Each of these Ebook CD projects has 6 PDF files to open; 1 Mobipocket, 1 HTML. Of course, the only problem occurs with the PDF files.
Let me start by saying that I was using Acrobat 6 until September, when we upgraded to CS 4, and never experienced this issue.
And after installing Acrobat Pro 9, I hadn't any difficulty until TODAY.
Order of events: I opened a past completed project in Typhoon Autorun to test the file before burning to CD.
When I clicked on one of the PDF document buttons, the first thing that happened was Adobe Active X 9 attempted to run. BUT the Active X failed to install on the first attempt:
"Error 1904.Module
C:|WINDOWS\system32\Macromed\Flash\Flash9f.ocx failed to register. HRESULT -2147220473. Contact your support personnel."
The Typhoon Autorun program continued operating and opened the project's PDF documents without any difficulty -- all 6 opened, one after the other, when I clicked on their buttons.
I closed out the error message, closed out the Typhoon Autorun project I was testing to work on another Typhoon Autorun project. When I had that one finished, I tested it as I had the one previous.
This time when I clicked on a button to open one of the PDF button, the Adobe Active X 9 program loaded and INSTALLED successfully.
THEN, the PDF document opened. But when I attempted to open any of the other 5, they did nothing. I double-checked my Typhoon Autorun project files, but all of the settings were correct. I tried testing my project again. This time NONE of the PDF files would open.
I closed the Typhoon Autorun program and attempted to open Acrobat Pro 9 immediately after. I tried clicking on the shortcut button several times with no result. After several minutes, literally, I received the "Fatal Error: Failed to connect to DDE server" --- actually, several instances of that message to correspond with all the times I'd attempted to open the program.
I shut down my computer, rebooted, reopend Typhoon Autorun and tried to test a different project.
Again, Adobe Active X 9 installed. (If it's already installed why is it reinsalling???)
And again, only 1 PDF file would open. Then none of the others. I shut down Typhoon Autorun and tried to open Adobe Acrobat again, and it wouldn't open.
The problem seems to be appearing when Adobe Active X 9 installs, and it's doing that automatically, without asking.
I never had this problem when I used Adobe Acrobat 6 (I'm really beginning to regret upgrading)
I never had this problem before this Active X 9 started installing.
Sandra Dugas

No solution I am afraid but same problem, running full version of AVG and problem hit immediately after Adobe Reader 9.1 upgrade. Pretty darn sure problem is in the upgrade but the relevant Restore Point was overwritten before I figured it out. Any advice welcome.

J_security_check fails on fwd fro another server ?

Similar Messages

Maybe you are looking for