J2ME Interview Questions-Please share your ideas.It's Useful for everyone.

Hi friends,
Recently, I attended J2ME interview. I could answer the basic questions but for few questions, I was doubtful. I�ve listed the few tough questions. Please share your ideas for
these questions. Hope it will be useful for everyone.
Questions:
Which mobile operating system did you use?
What do you mean by porting of applications?
If a MIDP application runs in an emulator then, is there guarantee that
It will work fine in device also? If no, then what issues are to be taken care?
What are the design issues to be taken care while developing Games
Which should be portable across all the vendor phones?
I�ve 1 MB png file in server but mobile supports 512 KB only So, how can
You download/access the image?
The mobile device has only 512 KB heap memory. An application needs 1 MB heap memory. How to make this application run without any problem?
If there are 3 applications each of 512 KB heap memory then, how memory management is done?
How to load the Image from Servlet to MIDlet?
When Garbage Collection is invoked, is there any guarantee that memory
Will be released?
5 forms are present and 1 Image is there. I need to access the same image
Over the 5 forms efficiently without creating the image using createImage, How?
Wht is use of Tilde layer?
Difference between Canvas & GameCanvas?
When do you need to use more than one thread in J2ME?
Is Threading internally implemented in the same way in Java & J2ME or is
There any difference?
Default value of Boolean variable in destroyApp() when it is invoked?
Difference between notifyDestroyed() and destroyApp()?
What are the ways to port applications to mobile?
How to find Button Clicks in J2ME similar to EventListeners in AWT?
Thanks,
Ravi.

Hi,
1) With 11g recently becoming available, should we upgrade to 11g or upgrade to 10g ?You should upgrade to 10g, and apply the latest 10g patches.
2) There is a white paper on Metaline (313418.1) that discusses using 10g with EBS. Is there anything similar for 11g ?11g is not available with the EBS. It has a different architecture and is not supported with EBS.
3) Can anyone share with me how long the actual upgrade process takes (please specify if your timings are 10g or 11g) ? To upgrade you need to do a new install of Discoverer 10g and upgrade the EUL. Make sure you have a good backup of the EUL before starting. The Discoverer install is straightforward and the EUL upgrade only takes a minute. BUT although all the workbooks are upgraded they are changed in ways that you might not have expected. Parameters become optional, occasionally worksheets disappear, titles get corrupted, the SQL generated can different, may perform more slowly and may occasionally return different results. It is sorting out these issues and regression testing the workbooks that take the time.
Rod West

Similar Messages

Can you please share your experience in implementing / upgrading the Primavera EPPM R8.3?

Hi,
In our company various versions (V7, R8.1 and R8.3) of Primavera being used in various locations. To bring all the location to a common platform, management has decided to implement / upgrade Primavera EPPM P6 R8.3 and also planned to integrate Primavera P6 R8.3 EPPM with Oracle (EBS) Projects application . Hence, If any of you implemented Primavera P6 EPPM R8.3 or upgraded the earlier versions to Primavera P6 R8.3. Please share your ideas and also the pros and cons of implementing R 8.3 EPPM. For your information we are going to have SQL database since all the existing databases are in SQL.
Please share your ideas and experiences.

Hi,
we have done a lot of implementations and migrations to the P6 EPPM R8.3 from different former versions and this is working fine. the dbsetup does a good job.
A good way in my point of view is to set up a new P6 EPPM R8.3 system with a new PMDB Instance which will keep the configurations so that you easily can migrate or exchange the instances. Always remind to have a validated backup of any instance before migrating.
Before migration you should mind the following points:
The source version of the old P6 PMDB instance is:
P6.2.1 or before => first you need to migrate it to P6 V7.0 before you can migrate it to P6 R8.3
P6 V7.0 => check if you have used P6 WebAccess: if not okay, else check if you used jackrabbit (look for migration tool), Workflows (close all before migrating); Check if using Jobservice XER-Export (no longer available); Jobservice Batchreport (only Workaround available see Knowledgebase); Risks in the P6 Client (need to be manually migrated)
P6 R8.0 to R8.2 => Using Extended Schema, Enterprise Reporting Database, own BI Publisher Reports => Check stept to be taken for migration
Other questions are:
Which authentication method will you use (native, LDAP, SSO)? If not using native and you want to connect the BI Publisher then you need also to use that authentication there.
The migration itself is pretty easy if you take care that all sessions are closed (no users or unclosed primavera sessions settings on that instance, stop all Applications, interfaces or Services connected to the instance. Cleanup your refrdel_deletes, logical_deletes and (if used before), extended Schema tables.
Then you can migrate with dbsetup, use additional Service Packs and Fixpacks (actually Service Pack 1) on the instances and then you can connect them into the environment by adding it to the P6 Configuration.
I mentioned you don't want to put all data into one final PMDB-Instance.
Regards,
Daniel

Please share your understanding and experiences on Picking Request Output.

Hi,
Have you ever involved in any project which related to the 'Picking Request' Output IDOC.
Normally it is triggered from Delivery output and corresponding picking data will be sent...
Please share your understanding on how to trigger this kind of Picking request ouput from delivery processing.
For example, you are the person is assigned to explore an existing SAP-system. Your task is to simulate an order cycle and most important points is to trigger the 'Picking request' Output IDOC in delivery order. But you dont know what Sales order type,Dlv type is used. The only thing you knew is the picking request output type is ZXXX from delivery header output.
How do you find out corresponding sales order type/Dlv order type/Billing order type according to an output type name ZXXX.
First, i will share my ideas:
Through ZXXX we could get corresponding condition records, as there contain some info like dlv type/sales order type..kinds of combinations..Follow that, i will find already proceessed sales documents. Then refer those document to do the re-creation.
Please kindly let me know your ideas.
Thanks!

Hi there,
Define a new O/p type. Select EDI in Transmission in Default values of O/p type for external system. Select ALE for internal system.
Assign an access sequence to that.
Maintain the determiantion procedure. In the requirement routine, put a condition that it should trigger only after picking / packing is done.
Assign the O/p to the delivery type.
In WE20, define a new partner to whom you want to send the IDOC. Give the required details.
Define a new IDOC processing prog & assign that to the process code of the IDOC in the partner profiles.
So whenever you do picking, the Op type will be trigered which will be processed by the IDOC prog & send it to the external system.
Regards,
Sivanand

Upgrade R11.5.10 to R12.1.3-- please share your experience

Please help me to note the most important steps while upgrading Oracle financials from 11i to R12.
Assuming client has GL, AP, HR, Payroll, ipayments ( R11.5.10 to R12.1.3)
Please share your experiences. It will be a greta learning experience for us.
Thanks in advance

user13648035 wrote:
Please help me to note the most important steps while upgrading Oracle financials from 11i to R12.
Assuming client has GL, AP, HR, Payroll, ipayments ( R11.5.10 to R12.1.3)
Please share your experiences. It will be a greta learning experience for us.
Thanks in advancePlease see old threads for similar discussion -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Upgrade+11+to+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Table controlled partitioning - please share your experiences.

hello ,
is anyone using table controlled partitioning in the sap on db2 for z/os enviroment?
can you please share your [good/bad]experiences on the subject ?
is there anything we should all watchout for ?
thanks
omer brandis
visit the sap on db2 for z/os blog
http://blogs.ittoolbox.com/sap/db2/

hello ,
is anyone using table controlled partitioning in the sap on db2 for z/os enviroment?
can you please share your [good/bad]experiences on the subject ?
is there anything we should all watchout for ?
thanks
omer brandis
visit the sap on db2 for z/os blog
http://blogs.ittoolbox.com/sap/db2/

Please share your experiance on Oracle Developer

Hi,
I need to decide a suitable architecture for my new product for
3-tier implementation.
I would like to know anyone adopted developer 6.0 and having any
project/product on 3-tier application, what are all the problems
faced or likely to face in this approach?. Will be there any
performance problems?. Is there any reference site in India?
Please share your experiences.
Thanks
-Sri
null

When I started reading your list, my gut feeling was, why Chieftec? But probably budgetary considerations were the main reason. For the PSU I would prefer a Corsair AX series or Seasonic gold label one.
I would have a look at the GTX 660 Ti with 4 GB VRAM. The extra memory would help with AE and 4D and in PR can prevent the rather ungraceful reverting to software mode if VRAM is depleted. Of course this depends on image size, but if the extra cost fits in your budget, it may be worth it.
If it fits in the chassis, I would look at a CPU cooler like the Noctua NH-D14 because of the bigger diameter fans. So, better cooling and less noise.

Please share your PDF/UA-compliance experiences

I encourage others to share your experiences in remediating PDFs for ISO 14289 (PDF/UA) compliance. Let’s learn from each other’s experiences.
I am working with documents that previously passed the Acrobat checker and PAC 1.3 along with manual checks for WCAG 2.0 compliance – so, the documents were as accessible as I knew how to make them. Below are the errors that I am seeing quite a bit from the new PAC2 PDF/UA-compliance checker. The “fix” is not necessarily the best, just what I have found that seems to work. I am using Acrobat Pro XI.
error: Font not embedded
fix: Tools > Print Production > Preflight > PDF fixups > Embed fonts
comment: This does not always work as some font licenses do not allow embedding. If you encounter non-embeddable fonts hopefully you have the source document and can use a different font.
error: Tagged content present inside an Artifact
fix: Open the Content pane. Open Artifact containers to find any content containers hiding inside. Drag the content containers to their proper place outside the Artifact container.
error: Alternative description missing for an annotation
fix: Add alt text to link tags.
comment: This seems an odd error. Some links benefit from alt text but others are perfectly clear without it. Seems like this should be a judgment call, but the Matterhorn Protocol insists on links having alt text.
error: Figure element on a single page with no bounding box.
fix: This error goes away if I tag the figure as an artifact, which makes sense. But if I then retag it as a figure and add back in the alt text, the error stays away.
comment: Seems odd. Even the Matterhorn Protocol PDF (http://www.pdfa.org/wp-content/uploads/2013/08/MatterhornProtocol_1-0.pdf) fails PAC2 on this point! This could be a rough spot in the PAC2 beta, not a real error, but is easy enough to “fix”.
error: DisplayDocTitle key is not set to true
fix: File > Properties > Initial View tab > In the Show drop down box, select “Document Title”
error: PDF/UA identifier missing
fix: Create an xmp file that includes the required snippet of metadata (example: http://bygosh.com/files/pdfuaid.xmp). Then: File > Properties > Description tab > Additional Metadata... > Advanced > Append
comment: This should be the final remediation step, after the document is otherwise PDF/UA-compliant. To apply the PDF/UA ID to a document that is not compliant would be fibbing.

Hi Wendy,
The requirement that all links include alternate text in the Contents key is frustrating ...
To the best of my knowledge, no current AT makes use of the Contents key alt text
No current tool makes it easy to create and configure the Contents key. To do so manually with a long set of links such as a table of contents is time consuming.
In a well-written document, link text is often quite clear in context, and alt text provides no benefit in terms of accessibility. This is almost certainly the case with a table of contents.
So, you have to make a choice. You can ...
Ignore this particular PDF/UA criterion and somehow live with the resulting scolding from PAC2.
Apply regular alt text to the links. This makes PAC2 happy but PAC 1.3 unhappy.
Patiently wait for the opportunity to shell out big bucks for a new tool that automates setting the link Contents key, like the "coming soon" PDF Global Access (new version of CommonLook with a new name) from NetCentric.
Bite the bullet and set the Contents key for each link tag manually. It is a bit intimidating at first to delve into the innards of the tag structure and make changes, but you will quickly gain experience and comfort level. This is the best solution if you, like me, obsess with making both PAC2 and PAC 1.3 say "Pass". Just be sure, as always when working with Acrobat, to save early and often to a new file name, in case something goes horribly wrong.
If you choose the last bullet, the PDF/UA Reference Suite includes example TOCs. As to what should be entered for "Value", for external links I typically use the title of the target page. For TOC entries, following the examples in the PDF Reference Suite, the Contents key value mirrors the text of the link, for example "Chapter 1: Introduction".
Hope this helps.
a 'C' student

Share your opinion on Adobe Contribute for a chance to win $500USD!

Share your opinion on Adobe Contribute for a chance to win
one of five $100USD gift checks or one $500USD gift check!
Take the survey now:
http://direct.adobe.com/r?xJvPqWTEJcqTHEcHqTJlH
In exchange for taking a short survey about your opinions of
Adobe Contribute, you will have the option of participating in a
drawing for a chance to win one of five $100USD gift checks or one
$500USD gift check.
Your responses will remain confidential. No information about
you will be sold or furnished to any other company whatsoever, nor
will you receive unsolicited emails because of your participation
in this survey.
Full list of rules:
http://direct.adobe.com/r?xJvPqWTEJcqTcEcHqTJlc
To take the survey, please visit:
http://direct.adobe.com/r?xJvPqWTEJcqTHEcHqTJlH
Ramesh Gopalakrishna
Product Manager
Adobe Contribute Team

Hey SpiceHeads! We know you’re often running around saving the day for your company, and your valiant efforts are sometimes overlooked. At Brother we’d love to reward your hard work and innovative thinking! Share one of your heroic IT acts in the comment section below for a chance to win one of two gaming prizes!First prize will get aMicrosoft Xbox One with Kinect.Runner up will get aSony PlayStation 4 Console.The prizes don’t stop there! We’re also giving anEVGAGeForce GTX TITAN X Suplerclocked graphics card!For a chance to win the grand prize,simply fill out the form located here.Also, the first 10 SpiceHeads to post their story and complete the form will be given a special mystery swag bag from Brother.May the odds be in your favor!End date: 8/14 US only.Terms & Conditions
This topic first appeared in the Spiceworks Community

I cannot send any message, on my Outlook Microsoft: Mac 2011. Thr following message appears. What shall I do? If your IP is a dynamic one (ADSL or dial-up, for instance) please reconfigure your outgoing settings to use your ISP server. (

I cannot send any message, on my Outlook Microsoft: Mac 2011. Thr following message appears. What shall I do?
My connection with Internet is fine, and I can receive messages, only cannot send.
"If your IP is a dynamic one (ADSL or dial-up, for instance) please reconfigure your outgoing settings to use your ISP server."
Best regards

See if your e-mail provider uses any different ports for SMTP, such at 25, 465 or 587.
if you're using Gmail, then port 587 will work with authentication set.

Guys, My Last Interview Question :( Please help me out

ID,                Name
101               Mr.
Null               Neil
Null               Adams
102               Mrs.
Null               Julie
Null               Roberts
Output should be:-
ID,     Name
101     Mr. Neil Adams
102     Mrs. Julie Roberts
Please how can i achieve this , this is my last interview question, How can i achieve this

1bc329c2-6758-4d86-ae8a-58738d862b6f wrote:
ID,                Name
101               Mr.
Null               Neil
Null               Adams
102               Mrs.
Null               Julie
Null               Roberts
Output should be:-
ID,     Name
101     Mr. Neil Adams
102     Mrs. Julie Roberts
Please how can i achieve this , this is my last interview question, How can i achieve this
You can't 'achieve' that. Rows in a table are like balls in a basket: there is NO first row.
Ask yourself how you would SORT that data to make your query return the data in the order that you show. There is no way to do that. The row you show as 'Null Neil' might get queried as any of the rows.

Please share your IPv6 information needs.

Are you implementing IPv6 in your network? Please share any of your IPv6 information needs here. Also share any comments you have on the IPv6 Knowledge Base Portal.

Hi John
If it's like previous years, you can register for as many sessions as you want, providing there are no clashes as you can't register for sessions that conflict or overlap with previosly booked sessions. It's always worth booking for those sessions that are of interest as some often fill and if you're not registered, you're forced to wait in a standby queue and might miss out entirely.
I only know as much as you do now regarding when the schedule builder will finally be available in that it's due sometime in July (which doesn't have too many days remaining).
Now my sessions will obviously fill quickly so make sure you book early or you might miss out ;)
Cheers
Richard Foote
http://richardfoote.wordpress.com/

ESS / MSS INTERVIEW QUESTIONS PLEASE MOST IMPORTANT .

Dear Friends,
I need know the more depth ESS/ MSS Interview Questions and Answers?
I appreciate your time.
Thanks,
Sammer.

/message/4753234#4753234 [original link is broken]

Auto tab focus method is not working in iOS devices please share the ideas why its not working?

Auto tab focus method is not working in iOS devices. Please share the idear i am facing this issue while developing code for devices.

Hi there,
I can confirm this bug.
Not sure if this info is relevant, but this is my experience:
I am on the FIDO network, and so are two other people I know.
We all tried blocking numbers, and calls ring right through. Text messages are blocked successfully. (never tried facetime)
I also tried a ROGERS device running IOS7, and was successfully able to block my phone call from ringing through. HOWEVER, my call was forwarded to their voicemail, I was able to leave a voicemail for the person, and they did get an alert that they had a new voicemail.
I have not yet had a chance to test this on Bell, Telus, or any other carriers.
Spoke to Apple, and they advised me to do a hard reset (hold both buttons to shut off and reboot the phone), and if that fails to do an iOS restore.
I have yet to try this, but hopefully someone will have a better solution.

No Video, No Screen share, No idea how to use it.

I have only ever used iChat to msg back and forth with friends overseas. However, in the last few years I have converted my whole family to Apple and they want to start video chatting. I have read countless discussions and maybe I'm not looking in the right area because really I have no idea how to look for an answer when I not sure what the right question is.
So here is my question. How do I set this thing up? I do not know that much about routers and ports and all that but I will list what I have and maybe someone can help me out. I as well as the rest of my family have iChat4.0.7 and Running 10.5.6 for the OS. I am hooked up to the internet via wireless router Lynksys WRT350N. I know how to set the router up so that it's not broadcasting it's name and so it has a hefty password but that's about it. When it comes to ports and know where to type in TCP 5190, 5220, 5222, 5223, 5298 or UDP 5190, 5297, 5298, 5353, 5678, 16393-16402 I have no clue.
I log onto ichat via AIM and Google. For my Google it is connected to talk.google.com for the server out port 5223 and use SSL is checked as far as AIM the server it slogin.oscar.aol.com port 5190 and use SSL is checked.
By the way I can share screens with my wife in house on the same router but not otherwise.
I used to be able to share screens and log onto my edit suite across town when I had to remotely help another editor but now when I bought my new MacBook Pro I can not do that anymore. This might be a completely different topic that should be listed under a share screen discussion board... not found that one yet.
If more information is needed please let me know and I would be glad to give what I know to fix this. It really should not be this hard but for me it seems to have stumped me really good.

Ok,
There are different methods of opening ports or allowing applications to use ports in a modem or router.
AS you want to Screen Share then it would be best to use UPnP (Universal Plug n Play).
Te Linksys will have this in the Adminstration page of it's set up page s that you can access in a web browser.
Use these Instructions only as far as gaining access then go to the Administration page/tab.
Enable UPnP
Go to the Security tab and Allow it to Respond to Anonymous Pings
Lets us know when you have done that.
9:03 PM Thursday; December 18, 2008

QUESTION: What is your most critical learning need for 2010?

There are no boundaries to this question. What topic is of most interest to you to learn during 2010? And while you're at it, tell me your preferred method of learning this topic - classroom, virtual, e-learning, podcast, webinar, or some other approach? All answers are appreciated...thanks.

Hello
Here is the search link for all 4 courses (http://www.sap.com/usa/services/education/searchcourse.epx?context=%5b%5bBPC*%7c%7c%7c%7c%7c%7c%7c%5d%5d%7c). Click on each of the courses and notice the course schedule tab. If the course is offered in the virtual environment, you will see it listed in the schedule.
Two last points
1. if you need to use the course request process, please try this link: https://www.sap.com/usa/services/education/request.epx?kNtBzmUK9zU.
2. if you have other questions, please feel free to let me know.

J2ME Interview Questions-Please share your ideas.It's Useful for everyone.

Similar Messages

Maybe you are looking for