J2sdkee-1_4-beta-linux installation pb

I install j2re-1_4_2-beta-linux-i586 first
then I wanted to install j2sdkee-1_4-beta-linux
When I run j2sdkee-1_4-beta-linux.sh
I get :
Cannot find Java(TM) 2 Platform, Standard Edition
Version 1.3 or higher is the Java(TM) 2 Platform, Standard Edition
is required to run this installation program
I suppose some installation step is missing.
But didn't find anything in doc.
Andre Legendre

First of all, you'll have to install full JDK in order to run J2EE 1.4 Application Server - JRE will not be enough. If installation still reports the same message after you install JDK, provide -javahome <jkd_path> parameter when you invoke installer.

Similar Messages

  • J2sdkee-1_4-beta-linux.sh installation

    We have executed the above file as follows
    sh j2sdkee-1_4-beta-linux.sh
    We got the following error
    ERROR: could not initialize interface awt - exception: java.lang.InternalError:Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
    We are using Redhat LINUX 7.2 version.
    Could anyone help us?
    Thanks&Rgds...Raveen.S

    the DISPLAY environment variable is used by linux/unix programs to figure out which X server to connect to when displaying graphics. There're a couple of long explanations at the bottom of
    http://www.linux.org/docs/ldp/howto/HOWTO-INDEX/howtos.html. Google gave me a more concise explanation at
    http://www.yale.edu/ceo/Documentation/UnixManual/node23.html. If you're running the program on the same machine as your monitor is hooked up to, you'll very likely want DISPLAY to be localhost:0.0
    If you're running your program remotely, you'll want to replace localhost with the name of the machine to which your monitor is connected.
    As for the original question on this thread. I'm guessing that you probably don't have an X server running. The HOWTO-INDEX link above will probably explain what's going on better than I could.

  • J2sdkee-1_4-beta-windows.exe drops before install complete on W2K Pro

    I ran the j2sdk-1_4_1_01-windows-i586.exe, got it installed & running with no problems.
    When I double click on j2sdkee-1_4-beta-windows.exe or when I select it through MS Add/Remove Programs, it starts up, showing the progress bar & saying InstallSheild is preparing the InstallSheild Wizard, which will guide you through the rest of the process.
    The progress bar runs across several times, and then the panel just closes. Nothing is installed, there is nothing to remove, there are no registry entries for the j2sdkee. There are no entries in the application event log.
    I did have to do the manual uninstall including editing the registry, but that was before I rebooted, downloaded a clean copy and tried to run the installer.
    Any other options? Can someone point me in a direction? Am I just missing something?
    Thanks for your help.
    KatL

    Clarification:
    "I did have to do the manual uninstall including editing the registry, but that wasLbefore I rebooted, downloaded a clean copy and tried to run the installer."
    I uninstalled the previous j2eesdk manually. There were some problems with the Add/Remove programs not removing the registry entry. That was when I rebooted the machine & started the download and install process from the beginning. I have not managed to get this version installed yet.
    Thanks
    KatL

  • Installation problem with j2eesdk-1_4-dr-linux-eval on RedHat 9

    After installing j2sdk-1_4_2_03-linux-i586-rpm.bin, I've tried to install j2eesdk-1_4-dr-linux-eval.
    # chmod a+x ./ j2eesdk-1_4-dr-linux-eval
    # ./ j2eesdk-1_4-dr-linux-eval -console
    However, j2eesdk-1_4-dr-linux-eval shows the following error message.
    Error: Cannot find the required Motif binaries.
    Check that the LD_LIBRARY_PATH environment variable includes the
    directories that contain the Motif binaries.
    # echo $LD_LIBRARY_PATH
    /usr/lib:/usr/local/lib:/usr/X11R6/lib
    What's wrong with this ?????
    Thanks in advance.

    Your LD_LIBRARY_PATH seems OK, but check that you indeed have OpenMotif package installed (look for libXm.so in /usr/X11R6/lib).

  • How to install Linux installation on SATA hdd with MSI VIA KM4M-V

    I'm having AMD 2600+
    MSI motherboard with VIA KM4M chipset
    80GB SATA harddisk (1 unit) with 256 MB RAM
    When I tried installing Linux, setup proceeds until the HDD partitioning screen and I get the msg " NO HDD found" or something similar messg.
    My question is 1 - does the above config supports Linux installation, if yes then how to do it and if no, then whats the solution.
    Has anyone faced similar situation...pl reply ASAP. I'd be obliged....
    best rgds,
    Mounesh.

    Hello!
    I'm no good at Linux, there muste be better people coming along later, just two questions:
    Doubt VIA (http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=610&kind=1 ), have support for Linux? Check http://www.viaarena.com!
    Everything is alright in BIOS, SATA enabled and so on?
    You might also check the manufacturer of the hard disk for software and advice.

  • Linux installation problem on D20

    Hi, guys,
    I am trying to install Redhat Linux x86_64 5.3 on D20 with a Marvell 88SE63xx/64xx SAS controller. As the Linux installer cannot recognize the SAS controller, I download a driver of Marvell mv64xx for Redhat x86_64 5.2 from Lenovo driver matrix website. Unfortunately, no matter how I follow the instruction to load the driver, the so-called mv64xx doesn't drive the Marvel 88SE63xx/64xx SAS controller in D20, so that the Redhat 5.3 Linux installer cannot find any hard drive. This is ridiculous and ironic because I got 5 SAS 15rpm hard drives in D20. Does anyone know how to resolve this problem and get Redhat Linux 5.3 installed on D20 with SAS drives?
    Solved!
    Go to Solution.

    hello, good news everyone
    today i tested the upcoming kernel 2.6.31-1 with ubuntu server x64  (9.10 / karmic)
    and what can i say?
    [    2.536365] mvsas 0000:01:00.0: mvsas: driver version 0.8.2
    [    2.536374] mvsas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    2.536379] mvsas 0000:01:00.0: setting latency timer to 64
    [    2.537283] mvsas 0000:01:00.0: mvsas: PCI-E x4, Bandwidth Usage: 2.5 Gbps
    [    7.769579] scsi7 : mvsas
    [    7.769954] /build/buildd/linux-2.6.31/drivers/scsi/mvsas/mv_sas.c 380hy 2 byte dmaded.
    [    7.770674] /build/buildd/linux-2.6.31/drivers/scsi/mvsas/mv_sas.c 1365:found dev[0:5] is gone.
    [    7.778539] ata7.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
    [    7.778543] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    [    7.779378] ata7.00: configured for UDMA/133
    [    7.779426] scsi 7:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
    the kernel included the mvsas module and its dependant, and ran out of the box doing anything. and yes, it's a software raid, the bios offers raid 5 and 10, but they are greyed out. okay, my graphic is now broken with 2.6.31-1, but hey, the 5 port's are working i almost forgot where i have put the 500gb disk. hdparm -tT showed 7.8gb/s buffered and 77mb/s normal read, which is normal for the drive. 
    because of the nature of a module, i believe you have to compile a kernel with support of mvsas on your own to boot linux from it, or you use the ich10 - only for optical drives - sata port, which works fine with the intel x25-m ssd.
    Message Edited by docc on 07-02-2009 12:06 AM

  • Request for developers to include the Dell Quadro FX 3450 in their beta linux flashplayer for 10.1

    request for developers to include the Dell Quadro FX 3450 in their beta linux flashplayer for 10.1.  i'm guessing it wouldn't be hard to do.  its the same chip that is used in the Nvidia Geforce 6800.  It has NV42GL core processor.  please don't leave this device behind, any acceleration that can be done to the existing flash player would definitely count, as great.
    thank you

    Hi it turns out that the SVN version is the most up to date which does not need to be patched as it has the right version numbers. I have created a new PKGBUILD.
    # Maintainer: kso <keansum AT gmail DOT com>
    pkgname=freechart-svn
    pkgver=r3169
    pkgrel=1
    pkgdesc="Free powerful charting library based on wxWidgets."
    arch=('x86_64' 'i686')
    url="http://wxcode.sourceforge.net/components/freechart/"
    license=('custom:"wxWindows"')
    depends=('wxgtk')
    makedepends=('subversion')
    source=('svn+http://svn.code.sf.net/p/wxcode/code/trunk/wxCode/components/freechart/')
    md5sums=('SKIP')
    _svntrunk=http://svn.code.sf.net/p/wxcode/code/trunk/wxCode/components/freechart/
    _svnmod=freechart
    pkgver() {
    cd "$_svnmod"
    local ver="$(svnversion)"
    printf "r%s" "${ver//[[:alpha:]]}"
    build() {
    cd "$srcdir"
    msg "Connecting to SVN server...."
    if [[ -d "$_svnmod/.svn" ]]; then
    (cd "$_svnmod" && svn up -r "$pkgver")
    else
    svn co "$_svntrunk" --config-dir ./ -r "$pkgver" "$_svnmod"
    fi
    msg "SVN checkout done or server timeout"
    msg "Starting build..."
    rm -rf "$srcdir/$_svnmod-build"
    svn export "$srcdir/$_svnmod" "$srcdir/$_svnmod-build"
    cd "$srcdir/$_svnmod-build"
    # BUILD HERE
    ./configure --prefix=/usr
    make
    package() {
    cd "$srcdir/$_svnmod-build"
    make DESTDIR="$pkgdir/" install
    # install LICENSE
    install -D -m644 $srcdir/$_svnmod/license.txt "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
    I have uploaded onto the AUR. I have checked using namcap. Please let me know if there are any mistakes.  Many thanks!

  • Linux installer missing from Solution Accelerator 9.5 Download

    The only solution accelerator download that I find at https://www.adobe.com/cfusion/entitlement/index.cfm?e=solution_accelerators is Solution_Accelerator_9_5_WWEFDJ_Win.zip.
    The installation document (install_sa.pdf)) says to run the Linux installer from "/Disk1/InstData/Linux/NoVM" however when I unpacked the .zip download file I only see Windows installers.
    I've installed ES 2.5 from the provided virtual appliance which is a SUSE Linux system so I require the Linux installer. Any ideas where I can find the Linux installer?

    Yes, same thing happens to me, I've downloaded lc_es2_connector_for_sharepoint_9.0.0.2_v1_win_jboss.zip since I've been using the Suse Linux Appliance installed from Adobe as trial (LiveCycleES2SP2.x86_64-0.0.4).
    and now I'm  stuck since the 86 MB zipped file doesn't have anything to do with the Linux Virtual Appliance (eg. no linux installation files ?).

  • Link for Oracle-on-Linux Installation Menu

    Posted on wrong forum.
    Shall this be correct?
    May somebody add the following link (SLES9 documentation) http://www.gesinet.it/oracle/oracleonsuse.html
    to the new "Oracle-on-Linux Installation Menu
    " http://www.oracle.com/technology/tech/linux/install/index.html ?
    Thank you

    Hi,
    The Documentation Feedback forum relates only to documentation at: http://www.oracle.com/technology/documentation/index.html
    Please try the Members Feedback forum at: Community Feedback (No Product Questions)
    Regards,
    Les

  • How do you exit the Arch Linux installer?

    How do you exit the Arch Linux installer? I decided to install windows before installing Arch Linux because I want to dual-boot/with those operating systems.
    What command should I type to exit & eject my Install CD?

    reset button?
    I think it depends on far into the process you are, if you are formatting the drive anew then it shouldn't matter much when, where, or how
    Best of Luck,
    Pat Jr.
    Last edited by PatJr (2009-01-21 14:49:42)

  • Arch Linux Installer

    Where can I find the documentation and code of the arch linux installer? Thanks

    pressh wrote:http://projects.archlinux.org/?p=instal … ;hb=master
    Note that this one is deprecated.
    http://projects.archlinux.org/?p=aif.git;a=summary
    This is the one we're working on now and we will use for releases in the feature.

  • Compile programs after linux installation

    Hello,
    when execute a transaction for first time after Linux installation the program is compiled. The server is a dialog instance with Red Hat and the central instance  and database server  have  HP-UX  O.S with Oracle. Why do this?
    Regards.

    ABAP programs are stored in text in the database table REPOSRC (often accessed from database view TRDIR).  The first time any ABAP program is executed, it must be compiled first.  Each time a program is executed, the compiled version is compared to the text version - if the text version has changed since the last compile, it will be compiled again.  If you have a heterogenous install (for example, Unix and Linux application servers), then the programs must be compiled once for each platform.
    The transaction code SGEN can help you to pre-compile all of your programs, if you wish.
    Cheers,
    David.

  • FlexUnit CI - Flash Player linux installation

    I am now attempting to do some CI testing with the FlexUnit Ant task on the Linux platform, specifically RHEL 6 (x64). I am finding the installation of the Linux debug stand-alone player not as straight-forward as I had hoped. I finally found using google that additional packages are required: 
    http://kb2.adobe.com/cps/153/tn_15380.html
    http://install-manual.blogspot.com/2011/01/run-linux-flash-player-projector-in.html
    That is fine (even though the blog post lists a different set of packages than Adobe does).   I am wondering about the "bitness" of the sa linux player package:  is it 32-bit or 64 bit?  I am wondering if I should be installing 32 bit versions of the dependent packages, or using the 64 bit ones that I presume the package manager is going to find. 
    Also, a colleague told me that he thought the Flash player was 32 bit and that it had to be used in conjunction with 32 bit Java on Linux. Could anyone comment on this?
    Thanks,
    Trevor

    I just found this post in the "More Like This" column to the right.  Strange that my search of the forum did not show that thread earlier.  Anyway, good Mr. Legros gives some advice that I found helpful: the stand-alone flash player is only available in a 32-bit version. But it can be made to work on a 64-bit Linux server.  I just got it working this morning. Both 64-bit and also some 32-bit dependencies must be installed. 
    On a 64-bit OS like RHEL 6, simply using "yum install <package>" will install the 64-bit version of the package.  e.g.
    yum install libcurl
    To get the 32-bit version, use:
    yum install libcurl.i686
    I grabbed the latest 10.3 Linux projector sa player from the Adobe site, version 10.3.183.11.
    On RHEL 6, here is the list of packages I installed per the Adobe Linux readme (note some were already installed and did not need to be updated). All of these are x64:
    libdl.so.2
    libpthread.so.0
    libX11.so.6
    libXext.so.6
    libXt.so.6
    * libfreetype.so.6    This was listed, but due to a dependency problem, I did not install
    libfontconfig.so.1
    libgtk-x11-2.0.so.0
    libgobject-2.0.so.0
    libglib-2.0.so.0
    libm.so.6
    libc.so.6
    libnss3
    cURL
    Then I checked this helpful blog post and installed the following additional modules (32-bit):
    libcurl.i686
    libcurl-devel.i686
    There were more modules listed, but I only installed these... (the less changes to a system, the better).
    Ok, at this point, I could run the "flashplayerdebug" executable and launch the GUI window, but I was seeing this warning in the console: (flashplayerdebugger:17237): Gtk-WARNING **: Unable to locate theme engine in module_path: "clearlooks". To get rid of this, I also installed:
    gtk2-engines.i686
    After all the above the player opens fine with no warnings, though I have not ran any SWFs yet.  When I close the GUI window, however, I do see a warning and a critical error:
    (flashplayerdebugger:19650): GLib-GObject-WARNING **: instance with invalid (NULL) class pointer
    (flashplayerdebugger:19650): GLib-GObject-CRITICAL **: g_signal_handlers_disconnect_matched: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
    This seems to be a bug in the player itself.  I just hope it does not cause me any issues.
    I hope this is helpful to someone else.  I know it will be helpful to me the next time I have to install the player on Linux!
    Regards,
    Trevor

  • Java Plug-in linux installation problem

    Hi!
    I am new to this subject, but I want to comment that I have problems installating the java plugin into my netscape 7.0 for Linux. My platform is Red Hat Linux 7.3.
    I have followed the instructions written in
    http://java.sun.com/j2se/1.3/install-linux-sdk.html#install-pkg
    but I still found that the plugin is not installed. (i.e when I open a web page that
    requires java plugin I still see a window saying "this page contains information type
    (application/java-vm) that can only be viewed with the appropiate Plug-in..")
    and also as confirmation the web page:
    http://wp.netscape.com/plugins/manager.html
    checks that that it is not installed the plugin.
    Would anyone please help me?

    You posted a problem that would be answered better and faster in a Linux or Netscape forum.
    You posted an installation question to "New to Java...", ignoring the fact that there is an "Installation" forum where you're more likely to get an answer.
    You posted a question that has, in fact, been answered in these forums already. You didn't bother to use the "Search" function. Try "plug-in linux install", and check out the first page of results.
    You posted a note, and waited FOUR WHOLE HOURS before whining that nobody's helping you. I'm amazed at your display of patience and understanding.
    Hint: this is a volunteer forum, inhabited by random Java developers. People answer when and as they have the time or inclination. Nobody here is getting any kind of return from responding. Nobody here owes you ANY response, much less an immediate one.
    Grant

  • After Linux installation my notebook can not boot up properly

    OK so I installed Linux ubunto and I was double booting with my standard version of Win when me and my friend tried to just go back to Windows we restored it back to the original with the backup disk only problem is that now the program (GRUB) that loads when you choose your operating system is still on the computer.
    It gives me an error 22 message every time... I was told I need to reset the master boot record or something like that but I do not know how so if someone plz could help me?
    That would be greatly appreciated!

    Your MBR (Master Boot Record) contains GRUB loader. You must recover its original contents.
    For win95/98/me you use "fdisk /mbr" with a startup disk.
    With win2000/xp you boot into the recovery console using the installation CD and type fixmbr
    Albert

Maybe you are looking for